Прямоугольное проецирование на три плоскости проекций. Проецирование точки. Проецирование на три плоскости проекций. геометрических тел: куба и параллелепипеда.
ПОГРЕШНОСТИ ИЗГОТОВЛЕНИЯ И УСТАНОВКИ ОТРАЖАТЕЛЬНЫХ ПРИЗМITMO University
Проведен анализ влияния на положение базовой линии (оптической оси) погрешностей изготовления и базирования при сборке отражательных призм. Получено выражение закона преломления в матричной форме, позволившее в результате простого и наглядного вывода получить инвариант декомпланарности. Применив его последовательно к каждой из поверхностей призмы, после последней поверхности получим отклонение выходящего из призмы луча от плоскости главного сечения в виде функции от отклонений нормалей ко всем поверхностям призмы от ее главного сечения, т. е. от декомпланарности нормалей к поверхностям призмы.
Презентация лекции из Электронного учебно-методического комплекса "Начертательная геометрия", авторы Л.А. Голдобина, А.Л. Бочков.
Свидет. о гос. рег. № 17165 от 07.06.2011
Презентация лекции из Электронного учебно-методического комплекса "Начертательная геометрия", авторы Л.А. Голдобина, А.Л. Бочков.
Свидет. о гос. рег. № 17165 от 07.06.2011
Прямоугольное проецирование на три плоскости проекций. Проецирование точки. Проецирование на три плоскости проекций. геометрических тел: куба и параллелепипеда.
ПОГРЕШНОСТИ ИЗГОТОВЛЕНИЯ И УСТАНОВКИ ОТРАЖАТЕЛЬНЫХ ПРИЗМITMO University
Проведен анализ влияния на положение базовой линии (оптической оси) погрешностей изготовления и базирования при сборке отражательных призм. Получено выражение закона преломления в матричной форме, позволившее в результате простого и наглядного вывода получить инвариант декомпланарности. Применив его последовательно к каждой из поверхностей призмы, после последней поверхности получим отклонение выходящего из призмы луча от плоскости главного сечения в виде функции от отклонений нормалей ко всем поверхностям призмы от ее главного сечения, т. е. от декомпланарности нормалей к поверхностям призмы.
Презентация лекции из Электронного учебно-методического комплекса "Начертательная геометрия", авторы Л.А. Голдобина, А.Л. Бочков.
Свидет. о гос. рег. № 17165 от 07.06.2011
Презентация лекции из Электронного учебно-методического комплекса "Начертательная геометрия", авторы Л.А. Голдобина, А.Л. Бочков.
Свидет. о гос. рег. № 17165 от 07.06.2011
China cardiovascular system drugs industry market demand forecast and investm...Qianzhan Intelligence
This document provides an analysis of the cardiovascular system drugs industry in China from 2012-2016. It discusses the prevalence of cardiovascular diseases in China and analyzes the market and competitive landscape of the cardiovascular drugs industry in China and internationally. The document also analyzes major drug categories and leading pharmaceutical companies in the cardiovascular drugs market. It aims to help industry players understand the latest developments and formulate business strategies in the cardiovascular drugs industry in China.
GLUCOband - Bianca Lennarz - DESMA9 Fall 2013 Midtermibiancca
The document proposes a glucose monitoring bracelet called GLUCOband that would help diabetics better manage their condition. It would use a small implanted chip to continuously monitor blood glucose levels through the skin and notify the wearer of any dangerous deviations from normal levels. This would eliminate the need for finger pricks multiple times a day and provide real-time glucose data, improving health outcomes and quality of life for diabetics.
Study on the Attitude of Medical Partitioners towardAnjum Kazimi
This document summarizes a study on the attitudes of medical practitioners in Pakistan towards social accountability. It describes the study's objectives to investigate medical practitioners' knowledge, attitudes, and practices related to social accountability. The methodology included surveys and interviews with 120 doctors. The results found the practitioners had average knowledge of social accountability but varying attitudes. Their attitudes were not strongly oriented towards social responsibility. The researchers recommend including social accountability training in medical curricula to improve practitioners' knowledge and attitudes.
The document discusses managing risk and creating value in medical travel by focusing on patient expectations, rights, and literacy. It notes that patient expectation is influenced by many sources and that patient rights come from overlapping sources and jurisdictions. The risk is an unmet expectation or bad outcome leading to bad publicity or legal liability. Managing risk and creating value involves making patients literate by clearly communicating expectations and rights, as well as defining the patient pathway through various stakeholders in medical travel.
Elliott Fisher | Monitoring Variation in Health CareSax Institute
Professor Elliott Fisher, Professor of Community and Family Medicine at Dartmouth Medical School and Director of the Center for Health Policy Research at the Dartmouth Institute for Health Policy and Clinical Practice spoke at the 5th HARC Forum in November 2009.
The purpose of this forum was to consider how we can create and use new evidence about health system performance in order to inform policy and practice.
Professor Fisher gave an overview of the internationally leading Dartmouth Atlas Project. This project has documented glaring variations in US healthcare delivery and has radically changed the way we think about effectiveness and efficiency of health care.
HARC stands for the Hospital Alliance for Research Collaboration. HARC is a collaborative network of researchers, health managers, clinicians and policy makers based in NSW, Australia managed by the Sax Institute.
HARC Forums bring members of the HARC network together to discuss the latest research and analysis about important issues facing our hospitals.
For more information visit saxinstitute.org.au.
2. АКСОНОМЕТРИЧЕСКИЕ ПРОЕЦИИ
АКСОН – (в переводе на русский язык) ОСЬ.
Аксонометрические проекции – объёмное изображение предметов на осях.
ДИМЕТРИЧЕСКАЯ ПРОЕЦИЯ ИЗОМЕТРИЧЕСКАЯ ПРОЕКЦИЯ
( ДИМЕТРИЯ ) ( ИЗОМЕТРИЯ )
В диметрической проекции размеры отрезков , В изометрической проекции размеры всех отрезков
параллельных осям Z и Y , строим в натуральную величину строим в натуральную величину.
а параллельные оси Y - уменьшаем в 2 раза
V
Фронтальная
плоскость
проекции
W
Профильная
Плоскость
проекции
Н
Горизонтальная пл. проекции
Z
X
Y
90
45
V
Фронтальная
плоскость
проекции
W
Профильная
плоскость
проекции
Н
Горизонтальная
плоскость проекции
Z
X Y
120 120
120
X
Y
W V
Y
H
V W
X
H
Y
Y