1.3 ds case 1 lpp model formulation
•Download as PPT, PDF•
1 like•249 views
The document presents a linear programming problem (LPP) case study involving a bicycle frame manufacturing company. The company produces two types of frames, a Deluxe and Professional model, and needs to determine the optimal production quantity of each given material constraints. The LPP model defines the objective as maximizing total weekly profit, with decision variables for each frame type's production quantity. Constraints involve the limited weekly supplies of two alloys used in production. Students are instructed to solve this LPP case study as practice.
Report
Share
Report
Share
Recommended
DESIGN AND ANALYSIS OF AUTOMOBILE WHEEL RIM USING DIFFERENT FILLET RADIUS AND...
The document describes a study on the design and analysis of an automobile wheel rim using different fillet radii and Y-spoke angles. A 3D model of an 8-spoke alloy wheel rim was created in CATIA and imported into ANSYS for structural analysis. The wheel rim was analyzed under a 1000N remote force and 245kPa internal pressure with varying fillet radii from 0 to 5mm and Y-spoke angles from 35 to 55 degrees. The results showed the total deformation was highest without a fillet and lowest with a 5mm fillet. For the Y-spoke angle variation, the total deformation was lowest at 55 degrees. Increasing the fillet radius and optimizing the Y-spoke
IRJET- A Review on Walker Materials and Design
This document summarizes different types of walker designs and materials. It discusses four main walker designs: the standard walker made of aluminum alloy and sponge, the Rollite walker made of lightweight aluminum, the Invacare walker adjustable from 34-38 inches made of aluminum, and the Walklite walker made of lightweight aluminum. It then reviews literature on the properties of materials commonly used in walkers, including aluminum, mild steel, and cast iron. Aluminum is discussed as a lightweight, corrosion-resistant metal ideal for walkers. The review identifies the need to study how different environments affect the mechanical properties of materials like mild steel used in walkers.
Design and Analysis of Bio-Enhancing Boots
The document describes the design and analysis of bio-enhancing boots. The boots are inspired by ostriches and aim to increase human running speed up to 40 kph by storing and releasing elastic energy like an ostrich's Achilles tendon. The boots would use high strength rubber springs to store elastic energy and release it to enable high speed running. The boots are intended to be strong, durable, easy to use over short to medium distances, and could reduce fossil fuel use by making exercise more enjoyable. Potential applications include human enhancement, robotics, military, and future sports.
Minimization of Casting Defects in Aluminum Alloys Wheels through Manufacturi...
This document summarizes research on minimizing casting defects in aluminum alloy wheels. It discusses how defects like shrinkage, porosity and cracks can be reduced through quality control tools during the manufacturing process. Fishbone and Pareto diagrams are used to identify common defects which occur during casting. Finite element analysis is conducted to analyze stresses and strains on wheel designs under static and dynamic loads to understand how design impacts the manufacturing process. The research aims to improve quality by minimizing defects through optimized manufacturing techniques and wheel designs.
Minimization of Casting Defects in Aluminum Alloys Wheels through Manufacturi...
This document summarizes research on minimizing casting defects in aluminum alloy wheels. It begins by introducing common defects like shrinkage, cracks, and porosity that occur during the aluminum alloy wheel manufacturing process. Fishbone diagrams and data analysis techniques are used to identify the defects. Designing the alloy wheel is important to understand stresses and strains before manufacturing. Finite element analysis is conducted on wheel models under static and dynamic loads. The static analysis shows stresses within safe limits, but the dynamic analysis exceeds yield stress, indicating design changes are needed to withstand real-world loads. Quality control tools and design optimization can help reduce casting defects and improve alloy wheel strength.
Design and crash analysis of a rollcage for formula sae race car
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IMPACT ANALYSIS ON ALUMINIUM AND MAGNESIUM 5 SPOKE ALLOY WHEEL USING FEA
This document discusses the finite element analysis of 5-spoke aluminum and magnesium alloy wheels. It begins with an introduction to alloy wheels and the material properties of A356 aluminum alloy and AZ91 magnesium alloy. It then describes the modeling of a 5-spoke wheel in SOLIDWORKS. The wheel model is imported into ANSYS for finite element analysis under impact loading conditions. The results show that the magnesium alloy wheel experiences greater total deformation, equivalent stress, and equivalent elastic strain compared to the aluminum alloy wheel. In conclusion, aluminum alloy wheels are found to be more durable than magnesium alloy wheels for regular vehicle use.
Finite Element Analysis of Wheel Rim Using Abaqus Software
The document summarizes a finite element analysis of wheel rims made from different materials using ABAQUS software. A wheel rim model was created in SOLIDWORKS and imported into ABAQUS for static analysis with a pressure load of 5N/mm^2 applied. Maximum principal stresses and displacements were compared for rims made of steel alloy, aluminum alloy, magnesium alloy, and forged steel. Steel alloy showed the lowest displacement of 0.1579mm and second lowest stress of 71.88MPa, indicating it would have greater durability than aluminum.
Recommended
DESIGN AND ANALYSIS OF AUTOMOBILE WHEEL RIM USING DIFFERENT FILLET RADIUS AND...
The document describes a study on the design and analysis of an automobile wheel rim using different fillet radii and Y-spoke angles. A 3D model of an 8-spoke alloy wheel rim was created in CATIA and imported into ANSYS for structural analysis. The wheel rim was analyzed under a 1000N remote force and 245kPa internal pressure with varying fillet radii from 0 to 5mm and Y-spoke angles from 35 to 55 degrees. The results showed the total deformation was highest without a fillet and lowest with a 5mm fillet. For the Y-spoke angle variation, the total deformation was lowest at 55 degrees. Increasing the fillet radius and optimizing the Y-spoke
IRJET- A Review on Walker Materials and Design
This document summarizes different types of walker designs and materials. It discusses four main walker designs: the standard walker made of aluminum alloy and sponge, the Rollite walker made of lightweight aluminum, the Invacare walker adjustable from 34-38 inches made of aluminum, and the Walklite walker made of lightweight aluminum. It then reviews literature on the properties of materials commonly used in walkers, including aluminum, mild steel, and cast iron. Aluminum is discussed as a lightweight, corrosion-resistant metal ideal for walkers. The review identifies the need to study how different environments affect the mechanical properties of materials like mild steel used in walkers.
Design and Analysis of Bio-Enhancing Boots
The document describes the design and analysis of bio-enhancing boots. The boots are inspired by ostriches and aim to increase human running speed up to 40 kph by storing and releasing elastic energy like an ostrich's Achilles tendon. The boots would use high strength rubber springs to store elastic energy and release it to enable high speed running. The boots are intended to be strong, durable, easy to use over short to medium distances, and could reduce fossil fuel use by making exercise more enjoyable. Potential applications include human enhancement, robotics, military, and future sports.
Minimization of Casting Defects in Aluminum Alloys Wheels through Manufacturi...
This document summarizes research on minimizing casting defects in aluminum alloy wheels. It discusses how defects like shrinkage, porosity and cracks can be reduced through quality control tools during the manufacturing process. Fishbone and Pareto diagrams are used to identify common defects which occur during casting. Finite element analysis is conducted to analyze stresses and strains on wheel designs under static and dynamic loads to understand how design impacts the manufacturing process. The research aims to improve quality by minimizing defects through optimized manufacturing techniques and wheel designs.
Minimization of Casting Defects in Aluminum Alloys Wheels through Manufacturi...
This document summarizes research on minimizing casting defects in aluminum alloy wheels. It begins by introducing common defects like shrinkage, cracks, and porosity that occur during the aluminum alloy wheel manufacturing process. Fishbone diagrams and data analysis techniques are used to identify the defects. Designing the alloy wheel is important to understand stresses and strains before manufacturing. Finite element analysis is conducted on wheel models under static and dynamic loads. The static analysis shows stresses within safe limits, but the dynamic analysis exceeds yield stress, indicating design changes are needed to withstand real-world loads. Quality control tools and design optimization can help reduce casting defects and improve alloy wheel strength.
Design and crash analysis of a rollcage for formula sae race car
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IMPACT ANALYSIS ON ALUMINIUM AND MAGNESIUM 5 SPOKE ALLOY WHEEL USING FEA
This document discusses the finite element analysis of 5-spoke aluminum and magnesium alloy wheels. It begins with an introduction to alloy wheels and the material properties of A356 aluminum alloy and AZ91 magnesium alloy. It then describes the modeling of a 5-spoke wheel in SOLIDWORKS. The wheel model is imported into ANSYS for finite element analysis under impact loading conditions. The results show that the magnesium alloy wheel experiences greater total deformation, equivalent stress, and equivalent elastic strain compared to the aluminum alloy wheel. In conclusion, aluminum alloy wheels are found to be more durable than magnesium alloy wheels for regular vehicle use.
Finite Element Analysis of Wheel Rim Using Abaqus Software
The document summarizes a finite element analysis of wheel rims made from different materials using ABAQUS software. A wheel rim model was created in SOLIDWORKS and imported into ABAQUS for static analysis with a pressure load of 5N/mm^2 applied. Maximum principal stresses and displacements were compared for rims made of steel alloy, aluminum alloy, magnesium alloy, and forged steel. Steel alloy showed the lowest displacement of 0.1579mm and second lowest stress of 71.88MPa, indicating it would have greater durability than aluminum.
Materials for automotive body and chassis structure by sandeep mangukiya
The document discusses materials used for automotive body and chassis structures. It outlines key requirements for these materials including lightweight, economic effectiveness, safety, and recyclability. Common materials discussed are steel, aluminum, magnesium, and various composites. Steel remains widely used due to its strength and crashworthiness. Aluminum and magnesium allow for weight reduction but have higher costs. Advanced composites further reduce weight but are also more expensive to produce.
IRJET- Design and Analysis of Electric Bike Chassis
1. The document discusses the design and analysis of an electric bike chassis. Finite element analysis was performed to analyze the structural properties and determine the natural frequencies and mode shapes.
2. A CAD model of the chassis was created and analyzed under different load cases. The stresses were found to be within acceptable limits.
3. Modal analysis determined the first natural frequency to be 60Hz, meeting the requirements for the electric motor. Harmonic analysis further validated the design.
DESIGN AND COMPARATIVE ANALYSIS OF OLD & NEW MODEL CAR WHEEL RIMS WITH VARIOU...
DESIGN AND COMPARATIVE ANALYSIS OF OLD & NEW MODEL CAR WHEEL RIMS WITH VARIOU...Journal For Research
The document summarizes a study that analyzed and compared old and new car wheel rim designs made of different materials. Researchers designed wheel rims using SolidWorks and analyzed them using ANSYS to simulate stresses and deformations. A normal rim and BMW rim were modeled and analyzed using aluminum alloy and stainless steel under a circumferential pressure load. Results showed stainless steel experienced less stress and deformation compared to aluminum alloy. The study concluded stainless steel is preferred over aluminum alloy for wheel rim material design due to lower deflections experienced. Future work could include analyzing additional forces on wheel rims and performing transient analyses.[IJET V2I5P22] Authors: Gangasani Ravikumar Reddy, M.Suneetha
[IJET V2I5P22] Authors: Gangasani Ravikumar Reddy, M.SuneethaIJET - International Journal of Engineering and Techniques
The document discusses the design and analysis of a car bumper using springs. It begins with an introduction describing the importance of bumpers in ensuring passenger safety during crashes. It then discusses previous research on bumper design using different materials. The proposed design involves using springs between the bumper and chassis to absorb impact forces rather than directly connecting the bumper to the chassis. The bumper is modeled and analyzed in CATIA and ANSYS using materials like carbon fiber composite, glass mat thermoplastic, and aluminum B390. Static and modal analyses are performed at different speeds and the results like stresses, displacements, and frequencies are compared for the bumper with and without springs. The analyses show that the proposed bumper with springs experiencesWidespread adoption of aluminum in the automotive industry: Sustainability ad...
Widespread adoption of aluminum in the automotive industry: Sustainability ad...Yomna Mahmoud Ibrahim Hassan
This document analyzes using aluminum instead of steel for car bodies to improve sustainability. It finds that:
1) Aluminum is lighter than steel, allowing a car with an aluminum body to reduce its weight by 47%, cutting fuel use and emissions.
2) An aluminum body can be manufactured with fewer parts and welding spots compared to steel, lowering production costs.
3) A financial analysis finds the cost savings from less fuel use outweigh the higher material costs of aluminum, with the break-even period ranging from a few years to over 25 years depending on variables like fuel prices and taxes.Design for manufacturing & assembly report (table lamp)
DFMA analysis of table lamp using Boothroyd-Dewhurst concurrent costing software and SolidWorks 3-D modelling
IRJET- Structural and Material Analysis of an Automobile Wheel Rim using ANSYS
This document summarizes a structural and material analysis of an automobile wheel rim using ANSYS software. A 3D model of a standard 17-inch wheel rim was created in SolidWorks and then imported into ANSYS for analysis. The rim was analyzed using four different materials: steel, titanium alloy, magnesium alloy, and aluminum alloy. For each material, the total deformation, equivalent elastic strain, and equivalent stress were calculated when a pressure of 0.34474 MPa was applied to the rim surface. The results showed aluminum alloy experienced the least deformation while steel experienced the least strain and stress. In conclusion, aluminum alloy was determined to be the best material for wheel rims out of the materials analyzed due to its strength properties and cost
Design and Analysis Of Hybrid Car Using Tubular Frame Chasis and Helium Gas
This document describes the design and analysis of a hybrid car using a tubular frame chassis and helium gas. It discusses the components of the car including the electric DC motor, frame, battery, and drive. Chromoly steel 4130 is selected for the tubular frame chassis due to its high strength and stiffness properties. Helium gas is selected to fill the chassis due to its low density, lifting properties, and compliance with regulations. Structural analysis using ANSYS software shows the maximum deformation of the chassis design is within permissible limits. The car is powered by a battery and electric DC motor, with the goal of reducing weight through the use of helium gas in the frame.
M1
This document discusses the design and optimization of a scissor jack. It begins with an abstract discussing the need to design automobile jacks that are cost-effective, versatile, and durable. It then provides an introduction on the types of jacks commonly used with vehicles and their disadvantages. The document describes the methodology used, which includes a literature review, problem definition, design formulation, case study, and conclusion. It also includes a failure analysis section that examines common failure points in scissor jacks like arm teeth wear, screw failure, and jack head failure. Finally, it presents a sample design calculation for a scissor jack to lift a Mahindra Bolero vehicle, optimizing dimensions and materials for the screw, nuts, pins
Report on Microstructure and fracture surface analysis
This report is about investigation of the microstructure and fracture surfaces of failed components. Visit http://www.topengineeringsolutions.com/ for similar projects.
IRJET- Design and Analysis of Alloy Wheel for Multi-Purpose Vehicle
This document summarizes a study on the design and analysis of an alloy wheel for a multi-purpose vehicle (MUV). Magnesium AZ80 material was selected for the alloy wheel due to its superior mechanical properties, durability, and light weight. A 18-inch alloy wheel design was analyzed using ABAQUS software for cornering, radial, and impact tests. The radial test analysis showed low stress and displacement within acceptable limits. However, the cornering test analysis found high stresses over twice the material's ultimate limit, indicating potential failure. The impact test analysis found maximum stresses within acceptable limits. The study concluded the design was suitable for radial and impact tests but required further investigation to avoid failure under cornering loads.
grad project3
1) The document discusses the process of aluminum alloy 6063 extrusion. It describes the key steps: billet preheating, extrusion through a die, quenching, stretching to remove distortions, cutting to final lengths, and artificial aging to achieve the desired mechanical properties.
2) Details are provided on preheating temperatures for different alloy types, the billet-on-billet continuous extrusion method, use of high-pressure water sprays for fast quenching, and computer-controlled stretching and cutting equipment.
3) Information is included on the properties and applications of aluminum alloy 6063, which is commonly used for architectural extrusions, window frames, doors, and other products due to
CNC Entry Level Machine for Trailer Construction, Roof Racks & Aluminum Profi...
CNC Entry Level Machine for Trailer Construction, Roof Racks & Aluminum Profi...OMNI CNC TECHNOLOGY CO LTD
Omni CNC uses CNC machines to craft a beautiful, light, and durable aluminum profile rack which is great for carrying sports gears like bicycles, kayaks, canoes, etc. Visit @ https://bit.ly/3jV6DBwF012463754
The document summarizes the random vibration and transient bump analysis of an automotive heavy vehicle leveling frame. It describes the modeling, optimization, and structural analysis of the existing leveling frame to reduce its weight. The leveling frame of a TATA 715 vehicle is modeled in SOLIDWORKS and analyzed in ANSYS to validate the optimized design. Various loads acting on the frame are considered and the design is evaluated based on stresses and deformations. The results are studied to validate the weight-reduced leveling frame.
Design Portfolio - John Chiu
John Chiu is a mechanical engineer seeking a position. His portfolio summarizes several projects from his education experience including developing a low-cost force sensor for his master's thesis. As an undergraduate, he led the design of a robotic fish and worked on a Baja car competition. He has experience in mechanical design, CAD modeling, robotics, and sensor integration.
IRJET- Thermal Analysis of Piston using Ansys
1. The document discusses a thermal analysis of a piston using ANSYS software to determine the thermal flux and temperature distribution with different materials.
2. A piston model was created in CATIA and imported into ANSYS for meshing and thermal analysis. The materials analyzed were aluminum alloy A360 and cast iron.
3. The results showed that aluminum alloy heats up more than cast iron within one minute but cast iron is heavier. Therefore, a combination of both materials may provide better performance.
Design & Analysis of foldable E-Bicycle
The document describes the design and analysis of a foldable electric bicycle. It discusses the motivation to create a compact e-bike that can be easily transported. The key components of the design include an aluminum alloy folding frame, a 36V rear hub motor, integrated 36V lithium-ion battery, single-speed chain drive system, mechanical disc and V-brakes, 27.5-inch tires, and rigid fork suspension. Various materials were analyzed for the frame and aluminum 6061 alloy was selected for its strength to weight ratio. The design aims to create a lightweight, portable electric bicycle that provides eco-friendly transportation.
Design and Analysis of Two-Wheeler Wheel Rim with Different Alloy Materials a...
This document describes a study analyzing the design and performance of a two-wheeler wheel rim made from different alloy materials and under varying loading conditions. Researchers modeled a wheel rim in CATIA V5 and performed static and modal analyses in ANSYS to compare the behavior of aluminum, magnesium, and titanium alloys. The static analysis examined total deformation, equivalent stress, and equivalent strain under different loads while the modal analysis identified the first six natural frequencies and mode shapes. Results showed magnesium alloy had the lowest equivalent stress and good dynamic stability, making it the best material for a lightweight wheel rim design.
IRJET-Review Paper on Design and Analysis of Composite Truck Bumper using Fin...
This document summarizes a research paper that analyzed the design and strength of a truck bumper made of mild steel versus a composite material using finite element analysis. The researchers modeled bumpers made of each material in CAD software and analyzed them for static linear stress and impact stress. Results showed the composite bumper experienced less stress than the mild steel bumper under static and impact loads. Additionally, the composite bumper weighed 74% less than the mild steel bumper. Based on the stress analyses, the researchers concluded a composite bumper would provide better performance than a mild steel bumper due to its higher strength to weight ratio and ability to experience less stress under loading.
IRJET- Dynamic Analysis of Bumper Beam
This document summarizes research on analyzing the dynamic performance of bumper beams through finite element analysis. It begins with an introduction to the importance of bumper beams in absorbing impact energy during collisions. The researchers then describe their CAD model and analysis of a Toyota Innova bumper beam made of aluminum, magnesium, and carbon fiber both with and without an epoxy resin coating. Their results found that the magnesium bumper beam experienced the lowest stress levels, and that adding an epoxy resin coating further reduced stress and deformation for both the magnesium and steel models. They conclude that a magnesium bumper beam with epoxy resin coating provides the most satisfactory performance for absorbing impact energy during collisions.
Working Capital Management.pptx
WORKING CAPITAL MANAGEMENT IS A KEY TO SUCCESS FOR ORGANIZATION AS IT DEPICTS OPERATIONAL EFFICIENCY OF A BUSINESS VENTURE.
Cash Flow Statement.pptx
The cash flow statement discloses the movement of cash within a business over an accounting period. It shows how changes in balance sheet accounts affect cash and breaks the analysis down into three sections - operating, investing and financing activities. The cash flow statement provides important information about a company's liquidity, solvency and financial flexibility.
More Related Content
Similar to 1.3 ds case 1 lpp model formulation
Materials for automotive body and chassis structure by sandeep mangukiya
The document discusses materials used for automotive body and chassis structures. It outlines key requirements for these materials including lightweight, economic effectiveness, safety, and recyclability. Common materials discussed are steel, aluminum, magnesium, and various composites. Steel remains widely used due to its strength and crashworthiness. Aluminum and magnesium allow for weight reduction but have higher costs. Advanced composites further reduce weight but are also more expensive to produce.
IRJET- Design and Analysis of Electric Bike Chassis
1. The document discusses the design and analysis of an electric bike chassis. Finite element analysis was performed to analyze the structural properties and determine the natural frequencies and mode shapes.
2. A CAD model of the chassis was created and analyzed under different load cases. The stresses were found to be within acceptable limits.
3. Modal analysis determined the first natural frequency to be 60Hz, meeting the requirements for the electric motor. Harmonic analysis further validated the design.
DESIGN AND COMPARATIVE ANALYSIS OF OLD & NEW MODEL CAR WHEEL RIMS WITH VARIOU...
DESIGN AND COMPARATIVE ANALYSIS OF OLD & NEW MODEL CAR WHEEL RIMS WITH VARIOU...Journal For Research
The document summarizes a study that analyzed and compared old and new car wheel rim designs made of different materials. Researchers designed wheel rims using SolidWorks and analyzed them using ANSYS to simulate stresses and deformations. A normal rim and BMW rim were modeled and analyzed using aluminum alloy and stainless steel under a circumferential pressure load. Results showed stainless steel experienced less stress and deformation compared to aluminum alloy. The study concluded stainless steel is preferred over aluminum alloy for wheel rim material design due to lower deflections experienced. Future work could include analyzing additional forces on wheel rims and performing transient analyses.[IJET V2I5P22] Authors: Gangasani Ravikumar Reddy, M.Suneetha
[IJET V2I5P22] Authors: Gangasani Ravikumar Reddy, M.SuneethaIJET - International Journal of Engineering and Techniques
The document discusses the design and analysis of a car bumper using springs. It begins with an introduction describing the importance of bumpers in ensuring passenger safety during crashes. It then discusses previous research on bumper design using different materials. The proposed design involves using springs between the bumper and chassis to absorb impact forces rather than directly connecting the bumper to the chassis. The bumper is modeled and analyzed in CATIA and ANSYS using materials like carbon fiber composite, glass mat thermoplastic, and aluminum B390. Static and modal analyses are performed at different speeds and the results like stresses, displacements, and frequencies are compared for the bumper with and without springs. The analyses show that the proposed bumper with springs experiencesWidespread adoption of aluminum in the automotive industry: Sustainability ad...
Widespread adoption of aluminum in the automotive industry: Sustainability ad...Yomna Mahmoud Ibrahim Hassan
This document analyzes using aluminum instead of steel for car bodies to improve sustainability. It finds that:
1) Aluminum is lighter than steel, allowing a car with an aluminum body to reduce its weight by 47%, cutting fuel use and emissions.
2) An aluminum body can be manufactured with fewer parts and welding spots compared to steel, lowering production costs.
3) A financial analysis finds the cost savings from less fuel use outweigh the higher material costs of aluminum, with the break-even period ranging from a few years to over 25 years depending on variables like fuel prices and taxes.Design for manufacturing & assembly report (table lamp)
DFMA analysis of table lamp using Boothroyd-Dewhurst concurrent costing software and SolidWorks 3-D modelling
IRJET- Structural and Material Analysis of an Automobile Wheel Rim using ANSYS
This document summarizes a structural and material analysis of an automobile wheel rim using ANSYS software. A 3D model of a standard 17-inch wheel rim was created in SolidWorks and then imported into ANSYS for analysis. The rim was analyzed using four different materials: steel, titanium alloy, magnesium alloy, and aluminum alloy. For each material, the total deformation, equivalent elastic strain, and equivalent stress were calculated when a pressure of 0.34474 MPa was applied to the rim surface. The results showed aluminum alloy experienced the least deformation while steel experienced the least strain and stress. In conclusion, aluminum alloy was determined to be the best material for wheel rims out of the materials analyzed due to its strength properties and cost
Design and Analysis Of Hybrid Car Using Tubular Frame Chasis and Helium Gas
This document describes the design and analysis of a hybrid car using a tubular frame chassis and helium gas. It discusses the components of the car including the electric DC motor, frame, battery, and drive. Chromoly steel 4130 is selected for the tubular frame chassis due to its high strength and stiffness properties. Helium gas is selected to fill the chassis due to its low density, lifting properties, and compliance with regulations. Structural analysis using ANSYS software shows the maximum deformation of the chassis design is within permissible limits. The car is powered by a battery and electric DC motor, with the goal of reducing weight through the use of helium gas in the frame.
M1
This document discusses the design and optimization of a scissor jack. It begins with an abstract discussing the need to design automobile jacks that are cost-effective, versatile, and durable. It then provides an introduction on the types of jacks commonly used with vehicles and their disadvantages. The document describes the methodology used, which includes a literature review, problem definition, design formulation, case study, and conclusion. It also includes a failure analysis section that examines common failure points in scissor jacks like arm teeth wear, screw failure, and jack head failure. Finally, it presents a sample design calculation for a scissor jack to lift a Mahindra Bolero vehicle, optimizing dimensions and materials for the screw, nuts, pins
Report on Microstructure and fracture surface analysis
This report is about investigation of the microstructure and fracture surfaces of failed components. Visit http://www.topengineeringsolutions.com/ for similar projects.
IRJET- Design and Analysis of Alloy Wheel for Multi-Purpose Vehicle
This document summarizes a study on the design and analysis of an alloy wheel for a multi-purpose vehicle (MUV). Magnesium AZ80 material was selected for the alloy wheel due to its superior mechanical properties, durability, and light weight. A 18-inch alloy wheel design was analyzed using ABAQUS software for cornering, radial, and impact tests. The radial test analysis showed low stress and displacement within acceptable limits. However, the cornering test analysis found high stresses over twice the material's ultimate limit, indicating potential failure. The impact test analysis found maximum stresses within acceptable limits. The study concluded the design was suitable for radial and impact tests but required further investigation to avoid failure under cornering loads.
grad project3
1) The document discusses the process of aluminum alloy 6063 extrusion. It describes the key steps: billet preheating, extrusion through a die, quenching, stretching to remove distortions, cutting to final lengths, and artificial aging to achieve the desired mechanical properties.
2) Details are provided on preheating temperatures for different alloy types, the billet-on-billet continuous extrusion method, use of high-pressure water sprays for fast quenching, and computer-controlled stretching and cutting equipment.
3) Information is included on the properties and applications of aluminum alloy 6063, which is commonly used for architectural extrusions, window frames, doors, and other products due to
CNC Entry Level Machine for Trailer Construction, Roof Racks & Aluminum Profi...
CNC Entry Level Machine for Trailer Construction, Roof Racks & Aluminum Profi...OMNI CNC TECHNOLOGY CO LTD
Omni CNC uses CNC machines to craft a beautiful, light, and durable aluminum profile rack which is great for carrying sports gears like bicycles, kayaks, canoes, etc. Visit @ https://bit.ly/3jV6DBwF012463754
The document summarizes the random vibration and transient bump analysis of an automotive heavy vehicle leveling frame. It describes the modeling, optimization, and structural analysis of the existing leveling frame to reduce its weight. The leveling frame of a TATA 715 vehicle is modeled in SOLIDWORKS and analyzed in ANSYS to validate the optimized design. Various loads acting on the frame are considered and the design is evaluated based on stresses and deformations. The results are studied to validate the weight-reduced leveling frame.
Design Portfolio - John Chiu
John Chiu is a mechanical engineer seeking a position. His portfolio summarizes several projects from his education experience including developing a low-cost force sensor for his master's thesis. As an undergraduate, he led the design of a robotic fish and worked on a Baja car competition. He has experience in mechanical design, CAD modeling, robotics, and sensor integration.
IRJET- Thermal Analysis of Piston using Ansys
1. The document discusses a thermal analysis of a piston using ANSYS software to determine the thermal flux and temperature distribution with different materials.
2. A piston model was created in CATIA and imported into ANSYS for meshing and thermal analysis. The materials analyzed were aluminum alloy A360 and cast iron.
3. The results showed that aluminum alloy heats up more than cast iron within one minute but cast iron is heavier. Therefore, a combination of both materials may provide better performance.
Design & Analysis of foldable E-Bicycle
The document describes the design and analysis of a foldable electric bicycle. It discusses the motivation to create a compact e-bike that can be easily transported. The key components of the design include an aluminum alloy folding frame, a 36V rear hub motor, integrated 36V lithium-ion battery, single-speed chain drive system, mechanical disc and V-brakes, 27.5-inch tires, and rigid fork suspension. Various materials were analyzed for the frame and aluminum 6061 alloy was selected for its strength to weight ratio. The design aims to create a lightweight, portable electric bicycle that provides eco-friendly transportation.
Design and Analysis of Two-Wheeler Wheel Rim with Different Alloy Materials a...
This document describes a study analyzing the design and performance of a two-wheeler wheel rim made from different alloy materials and under varying loading conditions. Researchers modeled a wheel rim in CATIA V5 and performed static and modal analyses in ANSYS to compare the behavior of aluminum, magnesium, and titanium alloys. The static analysis examined total deformation, equivalent stress, and equivalent strain under different loads while the modal analysis identified the first six natural frequencies and mode shapes. Results showed magnesium alloy had the lowest equivalent stress and good dynamic stability, making it the best material for a lightweight wheel rim design.
IRJET-Review Paper on Design and Analysis of Composite Truck Bumper using Fin...
This document summarizes a research paper that analyzed the design and strength of a truck bumper made of mild steel versus a composite material using finite element analysis. The researchers modeled bumpers made of each material in CAD software and analyzed them for static linear stress and impact stress. Results showed the composite bumper experienced less stress than the mild steel bumper under static and impact loads. Additionally, the composite bumper weighed 74% less than the mild steel bumper. Based on the stress analyses, the researchers concluded a composite bumper would provide better performance than a mild steel bumper due to its higher strength to weight ratio and ability to experience less stress under loading.
IRJET- Dynamic Analysis of Bumper Beam
This document summarizes research on analyzing the dynamic performance of bumper beams through finite element analysis. It begins with an introduction to the importance of bumper beams in absorbing impact energy during collisions. The researchers then describe their CAD model and analysis of a Toyota Innova bumper beam made of aluminum, magnesium, and carbon fiber both with and without an epoxy resin coating. Their results found that the magnesium bumper beam experienced the lowest stress levels, and that adding an epoxy resin coating further reduced stress and deformation for both the magnesium and steel models. They conclude that a magnesium bumper beam with epoxy resin coating provides the most satisfactory performance for absorbing impact energy during collisions.
Similar to 1.3 ds case 1 lpp model formulation (20)
Materials for automotive body and chassis structure by sandeep mangukiya
Materials for automotive body and chassis structure by sandeep mangukiya
IRJET- Design and Analysis of Electric Bike Chassis
IRJET- Design and Analysis of Electric Bike Chassis
DESIGN AND COMPARATIVE ANALYSIS OF OLD & NEW MODEL CAR WHEEL RIMS WITH VARIOU...
DESIGN AND COMPARATIVE ANALYSIS OF OLD & NEW MODEL CAR WHEEL RIMS WITH VARIOU...
[IJET V2I5P22] Authors: Gangasani Ravikumar Reddy, M.Suneetha
[IJET V2I5P22] Authors: Gangasani Ravikumar Reddy, M.Suneetha
Widespread adoption of aluminum in the automotive industry: Sustainability ad...
Widespread adoption of aluminum in the automotive industry: Sustainability ad...
Design for manufacturing & assembly report (table lamp)
Design for manufacturing & assembly report (table lamp)
IRJET- Structural and Material Analysis of an Automobile Wheel Rim using ANSYS
IRJET- Structural and Material Analysis of an Automobile Wheel Rim using ANSYS
Design and Analysis Of Hybrid Car Using Tubular Frame Chasis and Helium Gas
Design and Analysis Of Hybrid Car Using Tubular Frame Chasis and Helium Gas
Report on Microstructure and fracture surface analysis
Report on Microstructure and fracture surface analysis
IRJET- Design and Analysis of Alloy Wheel for Multi-Purpose Vehicle
IRJET- Design and Analysis of Alloy Wheel for Multi-Purpose Vehicle
CNC Entry Level Machine for Trailer Construction, Roof Racks & Aluminum Profi...
CNC Entry Level Machine for Trailer Construction, Roof Racks & Aluminum Profi...
Design and Analysis of Two-Wheeler Wheel Rim with Different Alloy Materials a...
Design and Analysis of Two-Wheeler Wheel Rim with Different Alloy Materials a...
IRJET-Review Paper on Design and Analysis of Composite Truck Bumper using Fin...
IRJET-Review Paper on Design and Analysis of Composite Truck Bumper using Fin...
More from Vishal Tidake
Working Capital Management.pptx
WORKING CAPITAL MANAGEMENT IS A KEY TO SUCCESS FOR ORGANIZATION AS IT DEPICTS OPERATIONAL EFFICIENCY OF A BUSINESS VENTURE.
Cash Flow Statement.pptx
The cash flow statement discloses the movement of cash within a business over an accounting period. It shows how changes in balance sheet accounts affect cash and breaks the analysis down into three sections - operating, investing and financing activities. The cash flow statement provides important information about a company's liquidity, solvency and financial flexibility.
2.9 Fund Flow Statement.pptx
FUND FLOW STATEMENT IS A TECHNIQUE THAT DESCRIBES FLOW OF FUNDS IN AND OUT OF THE BUSINESS WITHIN PARTICULAR ACCOUNTING YEAR.
Ratio Analysis.pptx
The document discusses ratio analysis, which is used by businesses to analyze their financial position and performance. It defines ratios as divisions of two numbers and explains that ratio analysis allows businesses to discuss their profitability, liquidity, solvency, and turnover with stakeholders. The document then categorizes ratios into five types - liquidity ratios, turnover ratios, solvency ratios, profitability ratios, and miscellaneous ratios. It provides examples of common ratios within each category and discusses the importance and limitations of ratio analysis.
Chapter 1- Environment of Business Finance.pptx
The document discusses the classification of finance into public finance, institutional finance, private finance, and international finance. It also defines market capitalization as the number of outstanding shares of a company multiplied by the share price.
1.6 key strategies of financial management
This document discusses the key strategies of financial management. It is presented by Dr. V. M. Tidake and is part of a unit on financial management for students. The key strategies of financial management that will be explained include capital budgeting, working capital management, and cash flow management. Contact information is provided for Dr. Tidake to get more details.
1.5 a's of financial management
This document discusses the A's of Financial Management which are the key aspects covered in a financial management course. It was presented by Dr. V. M. Tidake from Sanjivani College of Engineering and discusses understanding the A's of financial management as the objective of the session. Contact information is provided for Dr. Tidake for any additional details.
1.4 functions of financial management
This document discusses the functions of financial management and is presented by Dr. V. M. Tidake from Sanjivani College of Engineering. It lists understanding the functions of financial management as a learning objective and poses an exercise for students to state and explain the functions of financial management. It concludes by thanking the audience and providing contact information for Dr. Tidake.
1.3 approaches to finance
This document discusses approaches to financial management and is a presentation by Dr. V. M. Tidake on the topic. It outlines that students will understand the different approaches to financial management by the end of the session. It prompts an exercise question for students to state and explain the various approaches to finance and provides contact information for Dr. Tidake for any additional details.
1.2 introduction to financial management
This document is a presentation on an introduction to financial management given by Dr. V. M. Tidake at Sanjivani College of Engineering. The presentation covers the objectives of financial management which include maximizing shareholder wealth and firm value. It also contains sample problems and exercises for students to understand financial management concepts. Contact information is provided for Dr. Tidake for any additional questions.
1.1 introduction to finance
This document is a presentation about financial management that was given by Dr. V. M. Tidake. The presentation introduces finance and discusses its classification into public, institutional, private, and international finance. It aims to help students understand the introduction to finance and business finance in particular. Contact information is provided for Dr. Tidake to get more details.
Accounting standards notes Dr. V M Tidake
The document discusses Indian Accounting Standards (AS) as issued by the Institute of Chartered Accountants of India (ICAI). It provides definitions and explanations of key terms like accounting standards, accounting policies, revenue recognition, accounting for fixed assets, and depreciation accounting. Some of the main points covered include that accounting standards aim to standardize accounting policies and practices, the Accounting Standards Board of ICAI prepares the standards, and there are currently 32 accounting standards in India. The document also provides details on the objectives, disclosure requirements, and treatment of certain items under some major accounting standards like AS 1 on accounting policies, AS 6 on depreciation, AS 9 on revenue recognition, and AS 10 on fixed assets.
5.2.9 case 1 probability distribution
This document discusses a case study on probability distributions. It presents the dividend amounts and probabilities of a company's share. It shows how to calculate the expected gain by taking the sum of each dividend amount multiplied by its probability. For a share with a face value of Rs. 100, the expected gain is calculated as Rs. 17. Since this 17% expected return is higher than the minimum expected return of 15%, the document concludes that the shares should be purchased.
5.2.8 case 2 normal probability distribution
This document discusses solving probability problems using the normal distribution. It provides an example of test scores that are normally distributed with a mean of 14 and standard deviation of 2.5. It then calculates:
1) The number of students who scored between 12 and 15, which is 444.
2) The number of students who scored above 18, which is 55.
3) The number of students who scored below 8, which is 8.
The calculations are shown by converting the data values to standard normal variables and looking them up in a z-table.
5.2.7 case 1 normal probability distribution
This document discusses a case study on the normal probability distribution. It examines the weekly wages of 1000 workers which are normally distributed with a mean of Rs. 70 and standard deviation of Rs. 5. It estimates the number of workers whose weekly wages are: (i) Between Rs. 70 and Rs. 72 (155 workers) (ii) Between Rs. 69 and Rs. 72 (235 workers) (iii) More than Rs. 75 (159 workers) (iv) Less than Rs. 63 (81 workers). The document explains how to solve each case using the normal distribution and z-table. It concludes by asking students to explain the case study on normal probability distribution.
5.2.6 case 1 poisson probability distribution
This document discusses using the Poisson distribution to calculate probabilities related to defective electric bulbs. It provides an example where the probability of a bulb being defective is 5%. It then calculates: (1) the probability that none of the 100 bulbs in a box are defective is 0.007, (2) the probability that 3 bulbs are defective is 0.146, and (3) the probability that more than 3 bulbs are defective is 0.725. The document was presented by Dr. V. M. Tidake and discusses using the Poisson distribution to solve probability problems related to rare events.
5.2.5 case 2 binomial probability distribution
This document discusses a binomial probability distribution case study presented by Dr. V. M. Tidake. It provides the probabilities of a variate taking specific values based on given mean and variance parameters of a binomial distribution. The number of trials is calculated to be 9, and the probabilities of the variate taking the value of exactly 2 or at most 2 are calculated to be 0.235 and 0.378 respectively using the binomial probability formula. At the end, students are asked to explain the case study on binomial probability distribution.
5.2.4 case 1 binomial probability distribution
This document discusses the binomial probability distribution and provides examples of calculating probabilities of coin toss outcomes. Specifically, it addresses:
1) Calculating the probability of getting exactly 5 heads, at least 8 heads, not more than 3 heads, and at least one head when tossing 10 coins.
2) If the 10 coin toss is repeated 50 times, calculating the expected number of times exactly 5 heads will occur.
3) Explaining the case of the binomial probability distribution and providing contact information for the presenter.
5.10 case 7 probability
This document discusses a probability case study presented by Dr. V. M. Tidake. The case study asks the reader to calculate the probability that: (1) both a man and his wife will be alive 25 years in the future, given the man has a 30% probability of being alive and the wife a 40% probability; (2) only the man will be alive; (3) only the woman will be alive; and (4) at least one of them will be alive. The document provides the calculations to find each of these probabilities.
5.9 case 6 probability
This document presents a probability case study involving two friends, A and B, applying for two vacancies with different probabilities of selection. The probabilities of A and B being selected are 1/4 and 1/5, respectively. The document calculates the probabilities of: (1) one of them being selected; (2) both being selected; (3) neither being selected; and (4) at least one being selected. It concludes by asking students to solve the case study on probability.
More from Vishal Tidake (20)
Recently uploaded
[VCOSA] Monthly Report - Cotton & Yarn Statistics March 2024
We are pleased to share with you the latest VCOSA statistical report on the cotton and yarn industry for the month of March 2024.
Starting from January 2024, the full weekly and monthly reports will only be available for free to VCOSA members. To access the complete weekly report with figures, charts, and detailed analysis of the cotton fiber market in the past week, interested parties are kindly requested to contact VCOSA to subscribe to the newsletter.
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Harness the power of AI-backed reports, benchmarking and data analysis to predict trends and detect anomalies in your marketing efforts.
Peter Caputa, CEO at Databox, reveals how you can discover the strategies and tools to increase your growth rate (and margins!).
From metrics to track to data habits to pick up, enhance your reporting for powerful insights to improve your B2B tech company's marketing.
- - -
This is the webinar recording from the June 2024 HubSpot User Group (HUG) for B2B Technology USA.
Watch the video recording at https://youtu.be/5vjwGfPN9lw
Sign up for future HUG events at https://events.hubspot.com/b2b-technology-usa/
Experts live - Improving user adoption with AI
Bekijk de slides van onze sessie Enhancing Modern Workplace Efficiency op Experts Live 2024.
The Ipsos - AI - Monitor 2024 Report.pdf
According to Ipsos AI Monitor's 2024 report, 65% Indians said that products and services using AI have profoundly changed their daily life in the past 3-5 years.
一比一原版多伦多大学毕业证(UofT毕业证书)学历如何办理
办理【微信号:176555708】【办理(UofT毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版爱尔兰都柏林大学毕业证(本硕）ucd学位证书如何办理
原版一模一样【微信：741003700 】【爱尔兰都柏林大学毕业证(本硕）ucd成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理爱尔兰都柏林大学毕业证(本硕）ucd学位证书【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理爱尔兰都柏林大学毕业证(本硕）ucd学位证书【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理爱尔兰都柏林大学毕业证(本硕）ucd学位证书【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理爱尔兰都柏林大学毕业证(本硕）ucd学位证书【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Cell The Unit of Life for NEET Multiple Choice Questions.docx
celltheunitoflife
ribosomes
thegolgi
nuclearmembrane
cilia
phragmoplast
Jio cinema Retention & Engagement Strategy.pdf
Introduction to Jio Cinema**:
- Brief overview of Jio Cinema as a streaming platform.
- Its significance in the Indian market.
- Introduction to retention and engagement strategies in the streaming industry.
2. **Understanding Retention and Engagement**:
- Define retention and engagement in the context of streaming platforms.
- Importance of retaining users in a competitive market.
- Key metrics used to measure retention and engagement.
3. **Jio Cinema's Content Strategy**:
- Analysis of the content library offered by Jio Cinema.
- Focus on exclusive content, originals, and partnerships.
- Catering to diverse audience preferences (regional, genre-specific, etc.).
- User-generated content and interactive features.
4. **Personalization and Recommendation Algorithms**:
- How Jio Cinema leverages user data for personalized recommendations.
- Algorithmic strategies for suggesting content based on user preferences, viewing history, and behavior.
- Dynamic content curation to keep users engaged.
5. **User Experience and Interface Design**:
- Evaluation of Jio Cinema's user interface (UI) and user experience (UX).
- Accessibility features and device compatibility.
- Seamless navigation and search functionality.
- Integration with other Jio services.
6. **Community Building and Social Features**:
- Strategies for fostering a sense of community among users.
- User reviews, ratings, and comments.
- Social sharing and engagement features.
- Interactive events and campaigns.
7. **Retention through Loyalty Programs and Incentives**:
- Overview of loyalty programs and rewards offered by Jio Cinema.
- Subscription plans and benefits.
- Promotional offers, discounts, and partnerships.
- Gamification elements to encourage continued usage.
8. **Customer Support and Feedback Mechanisms**:
- Analysis of Jio Cinema's customer support infrastructure.
- Channels for user feedback and suggestions.
- Handling of user complaints and queries.
- Continuous improvement based on user feedback.
9. **Multichannel Engagement Strategies**:
- Utilization of multiple channels for user engagement (email, push notifications, SMS, etc.).
- Targeted marketing campaigns and promotions.
- Cross-promotion with other Jio services and partnerships.
- Integration with social media platforms.
10. **Data Analytics and Iterative Improvement**:
- Role of data analytics in understanding user behavior and preferences.
- A/B testing and experimentation to optimize engagement strategies.
- Iterative improvement based on data-driven insights.
一比一原版马来西亚博特拉大学毕业证（upm毕业证）如何办理
原版一模一样【微信：741003700 】【马来西亚博特拉大学毕业证（upm毕业证）成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理马来西亚博特拉大学毕业证（upm毕业证）【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理马来西亚博特拉大学毕业证（upm毕业证）【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理马来西亚博特拉大学毕业证（upm毕业证）【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理马来西亚博特拉大学毕业证（upm毕业证）【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uom毕业证书)曼彻斯特大学毕业证如何办理
原版一模一样【微信：741003700 】【(uom毕业证书)曼彻斯特大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uom毕业证书)曼彻斯特大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uom毕业证书)曼彻斯特大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uom毕业证书)曼彻斯特大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uom毕业证书)曼彻斯特大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
在线办理(英国UCA毕业证书)创意艺术大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(英国UCA毕业证书)创意艺术大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版悉尼大学毕业证如何办理
原版一模一样【微信：741003700 】【悉尼大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理悉尼大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理悉尼大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理悉尼大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理悉尼大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(Sheffield毕业证书)谢菲尔德大学毕业证如何办理
原版制作【微信:41543339】【(Sheffield毕业证书)谢菲尔德大学毕业证】【微信:41543339】《成绩单、外壳、雅思、offer、留信学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器一制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
End-to-end pipeline agility - Berlin Buzzwords 2024
We describe how we achieve high change agility in data engineering by eliminating the fear of breaking downstream data pipelines through end-to-end pipeline testing, and by using schema metaprogramming to safely eliminate boilerplate involved in changes that affect whole pipelines.
A quick poll on agility in changing pipelines from end to end indicated a huge span in capabilities. For the question "How long time does it take for all downstream pipelines to be adapted to an upstream change," the median response was 6 months, but some respondents could do it in less than a day. When quantitative data engineering differences between the best and worst are measured, the span is often 100x-1000x, sometimes even more.
A long time ago, we suffered at Spotify from fear of changing pipelines due to not knowing what the impact might be downstream. We made plans for a technical solution to test pipelines end-to-end to mitigate that fear, but the effort failed for cultural reasons. We eventually solved this challenge, but in a different context. In this presentation we will describe how we test full pipelines effectively by manipulating workflow orchestration, which enables us to make changes in pipelines without fear of breaking downstream.
Making schema changes that affect many jobs also involves a lot of toil and boilerplate. Using schema-on-read mitigates some of it, but has drawbacks since it makes it more difficult to detect errors early. We will describe how we have rejected this tradeoff by applying schema metaprogramming, eliminating boilerplate but keeping the protection of static typing, thereby further improving agility to quickly modify data pipelines without fear.
一比一原版(曼大毕业证书)曼尼托巴大学毕业证如何办理
原版一模一样【微信：741003700 】【(曼大毕业证书)曼尼托巴大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(曼大毕业证书)曼尼托巴大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(曼大毕业证书)曼尼托巴大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(曼大毕业证书)曼尼托巴大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(曼大毕业证书)曼尼托巴大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
[VCOSA] Monthly Report - Cotton & Yarn Statistics May 2024
We are pleased to share with you the latest VCOSA statistical report on the cotton and yarn industry for the month of May 2024.
Starting from January 2024, the full weekly and monthly reports will only be available for free to VCOSA members. To access the complete weekly report with figures, charts, and detailed analysis of the cotton fiber market in the past week, interested parties are kindly requested to contact VCOSA to subscribe to the newsletter.
一比一原版(lbs毕业证书)伦敦商学院毕业证如何办理
原版一模一样【微信：741003700 】【(lbs毕业证书)伦敦商学院毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(lbs毕业证书)伦敦商学院毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(lbs毕业证书)伦敦商学院毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(lbs毕业证书)伦敦商学院毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(lbs毕业证书)伦敦商学院毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
[VCOSA] Monthly Report - Cotton & Yarn Statistics March 2024
[VCOSA] Monthly Report - Cotton & Yarn Statistics March 2024
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Cell The Unit of Life for NEET Multiple Choice Questions.docx
Cell The Unit of Life for NEET Multiple Choice Questions.docx
End-to-end pipeline agility - Berlin Buzzwords 2024
End-to-end pipeline agility - Berlin Buzzwords 2024
A gentle exploration of Retrieval Augmented Generation
A gentle exploration of Retrieval Augmented Generation
[VCOSA] Monthly Report - Cotton & Yarn Statistics May 2024
[VCOSA] Monthly Report - Cotton & Yarn Statistics May 2024
1.3 ds case 1 lpp model formulation
- 1. www.sanjivanimba.org.in 302-DECISION SCIENCE Unit No.1. LPP 1.3 Case 1 LPP Model Formulation Presented By: Dr. V. M. Tidake Ph. D (Financial Management), MBA(FM), MBA(HRM) BE(Chem) Professor & Head Dept. of MBA 1 Sanjivani College of Engineering, Kopargaon Department of MBA www.sanjivanimba.org.in
- 2. www.sanjivanimba.org.in LINEAR PROGRAMING PROBLEM At the End of the Session Student will be able to develop- A. LPP Model
- 3. www.sanjivanimba.org.in Example Cycle Trends is introducing two new lightweight bicycle frames, the Deluxe and the Professional, to be made from aluminum and steel alloys. The anticipated unit profits are Rs. 10 for the Deluxe and Rs. 15 for the Professional. The number of pounds of each alloy needed per frame is summarized on the next slide. A supplier delivers 100 pounds of the aluminum alloy and 80 pounds of the steel alloy weekly. How many Deluxe and Professional frames should Cycle Trends produce each week?
- 4. www.sanjivanimba.org.in Example Pounds of each alloy needed per frame Aluminium Alloy Steel Alloy Deluxe 2 3 Professional 4 2
- 5. www.sanjivanimba.org.in Solution Define the objective Maximize total weekly profit Define the decision variables x = number of Deluxe frames produced weekly y = number of Professional frames produced weekly
- 6. www.sanjivanimba.org.in Solution Max Z = 10x + 15y Subject To 2x + 4y < 100 3x + 2y < 80 x , y > 0
- 7. www.sanjivanimba.org.in EXERCISE Solve the Above Case as a Practice Case in Tutorial Book.
- 8. www.sanjivanimba.org.in For More Details Contact Dr. V M Tidake tidkevishal@gmail.com tidkevishalmba@sanjivani.org.in