The document provides specifications for a 1258/200/WAF/PVC/PVC/E/PN16/SUDE/PUNE electrically operated plastic butterfly valve. The key details are: 1. The valve is 200mm in size, with wafer/flangeless ends made of PVC. It has a PVC disc and EPDM seating material. 2. It comes fitted with a Sdtork make three phase electrical reversible actuator with local position indicator, IP67 protection, and manual override handwheel. 3. The actuator is model SD-4000-20-E with torque and travel limit switches, and operates over 0-90 degrees in less than 20 seconds

1. 1258-SERIES Data Sheet Ref. No : SU-1258-00002
Electrically Operated Plastic MODEL NO.:
1258200WAFPVCPVCEPN16
SUDE
Butterfly Valve Technical PUNE / BANGALORE
Specifications ONFSD-4000-20-E2LS
Quotation Ref. No.
Quotation Date :
1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork
Make 3 Phase Electrical Actuator.
2. MAKE SUDE
3 APPLICATION
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material PVC
Disc Material PVC
Seating material EPDM
Flowing medium Chemical
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic On/Off Type
Sdtork Make Three Phase Electrical Reversible Stay put
Type Actuator, Supply Voltage: 415 volts 3 Phase AC
Actuator is in built with Local Position Indicator & Hand
Fitted with
Wheel For manual Operation. Type Of Actuator: Splash
Proof Direct on Valve, IP67 Construction. Supply
Voltage: 415 volts 3 Phase AC.
3.
ACTUATOR DETAILS
4.1 Series 4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m
4.5 Effective Output Speed-RPM
4.6 Output coupling
4.7 Diameter of stem

2. 4.8 Stroke 0 - 90˚
4.9 Time of operations – Sec /90˚
4.10 Manual over-ride Provided-Hand wheel with auto declutching arrangement
4.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator. Provided Continuous type.
4.14 Class of Protection. IP67
4.15 Duty
4.16 Weight of the actuator.
4.17 Mounting Dimensions
4.18 Area of Operation
4.19 Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty
5.4 Insulation Class F
5.5 Rating
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Not Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Not Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Refer Basic Specification Sheet Not Provided
Integral Starter

3. 5.7 Local Push Button Refer Basic Specification Sheet Not Provided
Station
5.8 Space Heater Not Provided
5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from the date of
installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES: