Can your epoxy take the heat?
•
0 likes•1,231 views
Master Bond epoxy compound EP17HT-LO can beat the heat in your most demanding bonding, sealing, coating or casting applications. This one part, heat curing system features outstanding performance properties including serviceability up to +650°F. EP17HT-LO exhibits a high glass transition temperature of 225°C, very low exotherm upon curing and other noteworthy properties. Check out this infographic for more information!
Report
Share
Report
Share
Recommended
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Most effective underfill epoxies such as EP29LPTCHT have low viscosities and feature high dimensional stability as well as a low coefficient of thermal expansion. EP29LPTCHT also offers high thermal conductivity, electrical insulation and a high tensile modulus. Scroll through our infographic to learn more.
One Component, Silver Filled Epoxy System
EP3HTS-LO is a fast curing, electrically conductive epoxy adhesive that is NASA low outgassing approved. It doesn’t require mixing, features an “unlimited” working life at room temperature and has a smooth thixotropic paste viscosity. This infographic clearly presents all the product property details at a glance, including its amazingly low volume resistivity and high thermal conductivity.
Silver Filled Epoxy for Bonding & Die Attach Applications
Master Bond EP3HTS-TC is a super unique epoxy utilizing a non-sintering silver technology to provide ultra high heat transfer capability. This one part system does not require mixing and features an array of impressive performance properties ideal for die attach and specialty bonding applications. Browse this infographic to learn more.
Super Toughened Epoxy Resists High Temperatures & Chemicals
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Rebar coupler
Rebar coupler,rebar splicing used to connect threaded rebar. OCEPO Thread Parallel Coupler provides a cost-effective, full strength joint and are amongst the most efficient and innovative mechanical splice available to the local construction industry where its applications are only limited to one's imaginations.
catalogue
we are manufacture of laminate flooring, spc flooring and mdf hdf hpl board.we can export to all over the world.
Recommended
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Most effective underfill epoxies such as EP29LPTCHT have low viscosities and feature high dimensional stability as well as a low coefficient of thermal expansion. EP29LPTCHT also offers high thermal conductivity, electrical insulation and a high tensile modulus. Scroll through our infographic to learn more.
One Component, Silver Filled Epoxy System
EP3HTS-LO is a fast curing, electrically conductive epoxy adhesive that is NASA low outgassing approved. It doesn’t require mixing, features an “unlimited” working life at room temperature and has a smooth thixotropic paste viscosity. This infographic clearly presents all the product property details at a glance, including its amazingly low volume resistivity and high thermal conductivity.
Silver Filled Epoxy for Bonding & Die Attach Applications
Master Bond EP3HTS-TC is a super unique epoxy utilizing a non-sintering silver technology to provide ultra high heat transfer capability. This one part system does not require mixing and features an array of impressive performance properties ideal for die attach and specialty bonding applications. Browse this infographic to learn more.
Super Toughened Epoxy Resists High Temperatures & Chemicals
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Rebar coupler
Rebar coupler,rebar splicing used to connect threaded rebar. OCEPO Thread Parallel Coupler provides a cost-effective, full strength joint and are amongst the most efficient and innovative mechanical splice available to the local construction industry where its applications are only limited to one's imaginations.
catalogue
we are manufacture of laminate flooring, spc flooring and mdf hdf hpl board.we can export to all over the world.
Thomson BSA Grease Brochure
This document summarizes grease options for lubricating ball and lead screw assemblies. It provides a lubrication selection chart that lists 5 grease types from BS&A, each formulated for different applications. The chart specifies maximum temperature limits, compatible mechanism materials, mechanical load suitability, temperature variation properties, and other specifications like vapor pressure and packaging options for each grease type. The document aims to help users choose the appropriate grease for their ball and lead screw assembly requirements.
JA-210 Epoxy Adhesives
JA-210 Epoxy Adhesives
[Sandpaper adhesives]
Website : http://www.jeilchemical.com/
E-mail : master@jeilepoxy.co.kr
Usage : ❶ Used in various adhesives such as ABS and non-woven fabric adhesion
❷ Sandpaper adhesives (various sandpaper adhesives including disc wheel types)
12777 coastal single pages part18
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. A cutting tool allows for high speed installation with pre-set blades for an accurate cut. The weatherseals are available in black, white, brown and grey and have a lifetime guarantee.
Standard material consumption constants on built up area basis - presentation 2
Standard material consumption constants on built up area basis - presentation 2Vaideeswaran Selavaraj
This document provides standard material consumption constants for residential projects based on built-up area. It lists the quantity in metric units of materials like cement, sand, steel, rubble, and murum required per square meter for various construction elements. These include external and internal walls, RCC work, masonry work, plastering, tiling, flooring, and other works. It also specifies steel consumption rates for structural elements like footings, columns, beams, slabs, chajjas, and overhead tanks. The quantities provided are intended to serve as guidelines for estimating material requirements for residential construction projects.Data of ceramic wear linings and lab
As a professional factory in China, we are manufacturing and exporting the below products since 1997.
1.92%,95%,T95%,99% Alumina ceramic tiles
2.ZTA(Zirconia Toughened Alumina) tiles/brick/block
3.Ceramic Rubber and Rubber-steel impact resistant linings
4.380/466/1000mm Cyclone for mining&mineral processing
5.Ceramic wearing compound for reparing
6.PU liner and PU products
Viscosity test 3
This document describes a test to determine the viscosity of bitumen. The test involves heating a sample to a specified temperature and measuring the time it takes for 50mL of the sample to flow through an orifice of a tar viscometer submerged in a water bath. Lower times indicate lower viscosity. The test is run at different temperatures depending on the type and grade of bitumen. Results provide the viscosity range for various common types and grades of bitumen to specify their fluidity properties.
Soal fin
This document describes an aluminum fin with a triangular cross-section attached to a wall at 250C in ambient air at 200C. The fin has a base thickness of 2mm and length of 6mm. It asks to calculate the fin efficiency, effectiveness, and heat dissipated per unit width by the fin given the surface convection of 40 W/m2.K.
3M Scotchcast Resin, Epoxy Resin 281
3M Scotchcast Electrical Resin 281 is a two-part, semi-flexible epoxy resin characterized by high temperature stability, flexibility, and thermal and electrical properties. It can be cured at low temperatures but optimal properties are obtained at higher cure temperatures. Applications include impregnation and encapsulation of electrical components to provide greater mechanical strength, tensile strength, thermal shock resistance, and thermal conductivity compared to other resins.
Hot Melt Coating Technology
Hot melt coating technology, technique, and more. For further informative articles visit www.slotdies.com and click on technical content. To receive the most recent articles and blog posts in your inbox please subscribe to our e-mail list.
Dry Mix Mortar
This presentation discusses the dry mix mortar technique for plastering in construction. It begins with an introduction to plastering and its objectives of protecting surfaces, providing smooth finishes, and improving appearances. It then discusses the history and components of dry mix mortar, including cement, sand, stone dust, and water. The presentation explains how using dry mix mortar can help achieve plastering goals by ensuring quality, meeting schedules, and reducing costs. It provides details on mixing, implementation, and results of compressive strength tests on cement and mortar mixes cured for different periods. Finally, the presentation concludes that the dry mix mortar technique supports high-quality, timely and economical construction of multi-story buildings.
Time&temperature of processing eva film laminated glass
The document provides guidelines for processing EVA film laminated glass at different temperatures and times based on the thickness of the glass. It recommends heating glass to 70°C for 10-20 minutes, then 130°C or 110°C for 30-60 minutes depending on thickness, before allowing it to cool below 75°C and finish vacuuming for less than 40°C. Additional tips note to vacuum for longer for multi-bed ovens and to adjust times for tempered glass.
Building products presenation (2)
This document provides information on autoclaved aerated concrete (AAC) blocks, including their properties, advantages over other building materials like concrete and bricks, and applications. AAC blocks are lightweight, strong, fire resistant and provide good insulation. They also use waste materials like fly ash and require less energy to produce than clay bricks. The document discusses AAC block production processes and gives details on jointing mortars, waterproofing solutions, plasters and other building products from the company.
UBP
The document introduces several new building construction products from UltraTech Cement including waterproofing, plastering, jointing, and grouting materials. Key features and test results showing the performance advantages of these products over traditional alternatives are provided. These include greater strength, reduced curing times, higher coverage rates, and less wastage. Product specifications, pricing, and coverage details are also included.
Introduction on aggregate crushing value apparatus
The principle mechanical properties required in road stones are
Satisfactory resistance to crushing under the roller during construction.
Adequate resistance to surface abrasions under traffic.
Accura Amethyst SLA Plastic material properties (EN)
This document summarizes Accura Amethyst Plastic, a stereolithography material optimized for rapid production of jewelry molds and prototypes. Key features include high accuracy, detail reproduction, thermal resistance, and compatibility with high-temperature rubber molding. The deep purple color allows for easy identification of parts. Example applications shown include a prototype helmet and a platform of 90 rings built automatically in 16.2 hours. Technical data is provided on tensile strength, hardness, heat resistance and other material properties.
Fineness test on cement
Fineness is tells about the particle distribution of cement. Fineness of is cement expressed in terms of total surface area of unit weight of of cement.
Tests
1) Sieve analysis ------->I.S.sieve NO.9 is used to test----->permissible limit for OPC is not more than 10% retained on I.S.SIEVE NO.9
2) Air permeability tests----->most commonly used in India is "BLAINE AIR PERMEABILITY TEST"
80623277 cost-estimator
This document contains rate analysis information for various civil engineering works, including materials, equipment, labor, and unit rates. It includes rate schedules for fencing, hand and pressure pipes, roads, canal linings, flooring, and other construction items. Contact information is provided for the project advisor and students. The rate analysis is intended to provide ease for both educational and professional quantity surveying work.
Durapatch data sheet
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
Pisa brochure
Sleepers are one of the widely used masonry material worldwide. For constructing garden walls, retaining walls, garden edges, compost bins, sleepers are the ideal choice. These are versatile and thus, can be an eternal part of any structures, especially those in garden landscapes.
Australian Paving Centre specialises in all kinds of natural stone masonry material. We also specialise in timber, steel, and concrete sleepers. We have an extensively large collection of all these types of sleepers as well as latest design creative sleepers. You can find a perfect sleeper material for your newly prepared garden, your old garden that you want to renovate, or even the interior space of a classic Australian home. Your imagination and design ideas matter the most for us. We are committed to provide you with the best quality sleepers to exactly complement any type of surroundings. If you need a helping hand with design ideas, we can certainly help you.
Be it a concrete wall, a retaining garden wall, or a decorative wall patch in the corridor, you will find exactly what you are looking for. We have something special to suit every style and architecture; and strive to deliver a touch of distinction to your surroundings. APC has a massive range of varieties in colours, patterns, finishes, designs, and shapes to choose from.
Sleepers are easy to install and long lasting. Concrete sleepers are the toughest and most preferred ones of all. Another reason for this is that they are most unlikely to get rotten and encounter with white ant infestation.
Contact us or drop in a visit to our local store to discover the large array of sleepers and get your queries regarding delivery and installation resolved.
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
From Field to Factory, Adhesives for Food Processing Equipment
Master Bond's line of adhesive compounds for the food processing industry conform to Title 21, U.S. Code of Federal Regulations, FDA Chapter 1, Section 175.105 requirements for food safety. These systems can be used in a variety of applications from storage tanks to containment vessels.
More Related Content
What's hot
Thomson BSA Grease Brochure
This document summarizes grease options for lubricating ball and lead screw assemblies. It provides a lubrication selection chart that lists 5 grease types from BS&A, each formulated for different applications. The chart specifies maximum temperature limits, compatible mechanism materials, mechanical load suitability, temperature variation properties, and other specifications like vapor pressure and packaging options for each grease type. The document aims to help users choose the appropriate grease for their ball and lead screw assembly requirements.
JA-210 Epoxy Adhesives
JA-210 Epoxy Adhesives
[Sandpaper adhesives]
Website : http://www.jeilchemical.com/
E-mail : master@jeilepoxy.co.kr
Usage : ❶ Used in various adhesives such as ABS and non-woven fabric adhesion
❷ Sandpaper adhesives (various sandpaper adhesives including disc wheel types)
12777 coastal single pages part18
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. A cutting tool allows for high speed installation with pre-set blades for an accurate cut. The weatherseals are available in black, white, brown and grey and have a lifetime guarantee.
Standard material consumption constants on built up area basis - presentation 2
Standard material consumption constants on built up area basis - presentation 2Vaideeswaran Selavaraj
This document provides standard material consumption constants for residential projects based on built-up area. It lists the quantity in metric units of materials like cement, sand, steel, rubble, and murum required per square meter for various construction elements. These include external and internal walls, RCC work, masonry work, plastering, tiling, flooring, and other works. It also specifies steel consumption rates for structural elements like footings, columns, beams, slabs, chajjas, and overhead tanks. The quantities provided are intended to serve as guidelines for estimating material requirements for residential construction projects.Data of ceramic wear linings and lab
As a professional factory in China, we are manufacturing and exporting the below products since 1997.
1.92%,95%,T95%,99% Alumina ceramic tiles
2.ZTA(Zirconia Toughened Alumina) tiles/brick/block
3.Ceramic Rubber and Rubber-steel impact resistant linings
4.380/466/1000mm Cyclone for mining&mineral processing
5.Ceramic wearing compound for reparing
6.PU liner and PU products
Viscosity test 3
This document describes a test to determine the viscosity of bitumen. The test involves heating a sample to a specified temperature and measuring the time it takes for 50mL of the sample to flow through an orifice of a tar viscometer submerged in a water bath. Lower times indicate lower viscosity. The test is run at different temperatures depending on the type and grade of bitumen. Results provide the viscosity range for various common types and grades of bitumen to specify their fluidity properties.
Soal fin
This document describes an aluminum fin with a triangular cross-section attached to a wall at 250C in ambient air at 200C. The fin has a base thickness of 2mm and length of 6mm. It asks to calculate the fin efficiency, effectiveness, and heat dissipated per unit width by the fin given the surface convection of 40 W/m2.K.
3M Scotchcast Resin, Epoxy Resin 281
3M Scotchcast Electrical Resin 281 is a two-part, semi-flexible epoxy resin characterized by high temperature stability, flexibility, and thermal and electrical properties. It can be cured at low temperatures but optimal properties are obtained at higher cure temperatures. Applications include impregnation and encapsulation of electrical components to provide greater mechanical strength, tensile strength, thermal shock resistance, and thermal conductivity compared to other resins.
Hot Melt Coating Technology
Hot melt coating technology, technique, and more. For further informative articles visit www.slotdies.com and click on technical content. To receive the most recent articles and blog posts in your inbox please subscribe to our e-mail list.
Dry Mix Mortar
This presentation discusses the dry mix mortar technique for plastering in construction. It begins with an introduction to plastering and its objectives of protecting surfaces, providing smooth finishes, and improving appearances. It then discusses the history and components of dry mix mortar, including cement, sand, stone dust, and water. The presentation explains how using dry mix mortar can help achieve plastering goals by ensuring quality, meeting schedules, and reducing costs. It provides details on mixing, implementation, and results of compressive strength tests on cement and mortar mixes cured for different periods. Finally, the presentation concludes that the dry mix mortar technique supports high-quality, timely and economical construction of multi-story buildings.
Time&temperature of processing eva film laminated glass
The document provides guidelines for processing EVA film laminated glass at different temperatures and times based on the thickness of the glass. It recommends heating glass to 70°C for 10-20 minutes, then 130°C or 110°C for 30-60 minutes depending on thickness, before allowing it to cool below 75°C and finish vacuuming for less than 40°C. Additional tips note to vacuum for longer for multi-bed ovens and to adjust times for tempered glass.
Building products presenation (2)
This document provides information on autoclaved aerated concrete (AAC) blocks, including their properties, advantages over other building materials like concrete and bricks, and applications. AAC blocks are lightweight, strong, fire resistant and provide good insulation. They also use waste materials like fly ash and require less energy to produce than clay bricks. The document discusses AAC block production processes and gives details on jointing mortars, waterproofing solutions, plasters and other building products from the company.
UBP
The document introduces several new building construction products from UltraTech Cement including waterproofing, plastering, jointing, and grouting materials. Key features and test results showing the performance advantages of these products over traditional alternatives are provided. These include greater strength, reduced curing times, higher coverage rates, and less wastage. Product specifications, pricing, and coverage details are also included.
Introduction on aggregate crushing value apparatus
The principle mechanical properties required in road stones are
Satisfactory resistance to crushing under the roller during construction.
Adequate resistance to surface abrasions under traffic.
Accura Amethyst SLA Plastic material properties (EN)
This document summarizes Accura Amethyst Plastic, a stereolithography material optimized for rapid production of jewelry molds and prototypes. Key features include high accuracy, detail reproduction, thermal resistance, and compatibility with high-temperature rubber molding. The deep purple color allows for easy identification of parts. Example applications shown include a prototype helmet and a platform of 90 rings built automatically in 16.2 hours. Technical data is provided on tensile strength, hardness, heat resistance and other material properties.
Fineness test on cement
Fineness is tells about the particle distribution of cement. Fineness of is cement expressed in terms of total surface area of unit weight of of cement.
Tests
1) Sieve analysis ------->I.S.sieve NO.9 is used to test----->permissible limit for OPC is not more than 10% retained on I.S.SIEVE NO.9
2) Air permeability tests----->most commonly used in India is "BLAINE AIR PERMEABILITY TEST"
80623277 cost-estimator
This document contains rate analysis information for various civil engineering works, including materials, equipment, labor, and unit rates. It includes rate schedules for fencing, hand and pressure pipes, roads, canal linings, flooring, and other construction items. Contact information is provided for the project advisor and students. The rate analysis is intended to provide ease for both educational and professional quantity surveying work.
Durapatch data sheet
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
Pisa brochure
Sleepers are one of the widely used masonry material worldwide. For constructing garden walls, retaining walls, garden edges, compost bins, sleepers are the ideal choice. These are versatile and thus, can be an eternal part of any structures, especially those in garden landscapes.
Australian Paving Centre specialises in all kinds of natural stone masonry material. We also specialise in timber, steel, and concrete sleepers. We have an extensively large collection of all these types of sleepers as well as latest design creative sleepers. You can find a perfect sleeper material for your newly prepared garden, your old garden that you want to renovate, or even the interior space of a classic Australian home. Your imagination and design ideas matter the most for us. We are committed to provide you with the best quality sleepers to exactly complement any type of surroundings. If you need a helping hand with design ideas, we can certainly help you.
Be it a concrete wall, a retaining garden wall, or a decorative wall patch in the corridor, you will find exactly what you are looking for. We have something special to suit every style and architecture; and strive to deliver a touch of distinction to your surroundings. APC has a massive range of varieties in colours, patterns, finishes, designs, and shapes to choose from.
Sleepers are easy to install and long lasting. Concrete sleepers are the toughest and most preferred ones of all. Another reason for this is that they are most unlikely to get rotten and encounter with white ant infestation.
Contact us or drop in a visit to our local store to discover the large array of sleepers and get your queries regarding delivery and installation resolved.
What's hot (19)
Standard material consumption constants on built up area basis - presentation 2
Standard material consumption constants on built up area basis - presentation 2
Time&temperature of processing eva film laminated glass
Time&temperature of processing eva film laminated glass
Introduction on aggregate crushing value apparatus
Introduction on aggregate crushing value apparatus
Accura Amethyst SLA Plastic material properties (EN)
Accura Amethyst SLA Plastic material properties (EN)
More from Master Bond
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
From Field to Factory, Adhesives for Food Processing Equipment
Master Bond's line of adhesive compounds for the food processing industry conform to Title 21, U.S. Code of Federal Regulations, FDA Chapter 1, Section 175.105 requirements for food safety. These systems can be used in a variety of applications from storage tanks to containment vessels.
Low Outgassing Approved Adhesives Systems
This wide range of adhesive compounds meet NASA low outgassing specifications and feature their own unique set of high performance properties such as optical clarity, thermal conductivity, cryogenic serviceability and more. Browse through this infographic to learn about our top performing NASA low outgassing approved systems.
Adhesives for Sensor Applications
Choosing the most effective adhesive for an electronic application involving sensors is critical. Since sensors work by responding to outside environmental factors such as heat, light or motion, it is crucial to use an adhesive that will not impede on the components’ ability to gather outside information. Master Bond’s adhesive compounds for sensor applications assist in enhancing the performance properties of sensors with select grades offering impressive values of thermal conductivity, electrical conductivity, electrical insulation and more.
Medical Grade, UV Curable Adhesives Systems
Learn about our line of UV10 adhesives that meet USP Class VI approval for use in medical device manufacturing. These systems feature unique flow properties, along with optical clarity and fast curing times.
Tough Epoxy Polysulfide System Resists up to 350˚F
Master Bond EP21TPHT is an epoxy polysulfide compound that withstands temperatures up to 350°F - giving it a higher resistance to elevated temperatures than most polysulfide systems. Scroll through this infographic to learn more about this new chemically resistant, flexible system.
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
Master Bond Company Capabilities
Master Bond was founded in 1976 and formulates over 3,000 grades of adhesives, sealants, coatings, potting and encapsulation compounds that are certified for use across industries. They supply their compounds to top research universities and technology manufacturing companies in the world, with the compounds being applied in a variety of applications including optical assemblies, lasers, e-textiles, packaging, confocal microscopes, prosthetic devices, capacitors, aircraft, medical devices, and plasma physics research. Master Bond offers technical support throughout the design and manufacturing process to help engineers find the most suitable product.
Tough Enough for Harsh Chemicals
Master Bond EP21TP-2NV features superior thermal shock and chemical resistance while maintaining durable bonds to similar and dissimilar substrates. This tough compound is noted for its ability to withstand prolonged exposure to fuel and oils. EP21TP-2NV cures at ambient temperatures or more rapidly at elevated temperatures and can be applied without sagging.
Low CTE Epoxy for Precise Alignment
Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Scroll through to learn more.
It's What's Inside That Counts - Nanosilica Filled Adhesives
Learn about Master Bond’s nanosilica filled systems offering enhanced abrasion resistance and dimensional stability.
These specialty formulations feature superior physical properties as well as low shrinkage upon curing. View to learn more!
One Component, Non-Drip Adhesive for Structural Bonding
Serviceable up to +500°F, EP13SPND-2 is a one part epoxy paste for structural bonding applications. This electrically insulative system has a non-drip application feature that delivers high tensile, tensile lap shear and compressive strength of over 8,000 psi, 3,000 psi and 18,000 psi, respectively. It also offers superb dimensional stability and chemical resistance.
Toughened, Two Component, Room Temperature Curing Epoxy
Master Bond Supreme 11HT-3A epoxy features high performance properties including thermal cycling and high temperature resistance. This two part system is easy to handle with a convenient mix ratio and a long open time. Browse through this infographic to learn more.
For Long Lasting, Stable Connections
View this infographic to learn about MasterSil 973S-LO, a two part silicone ideal for use in vacuum environments. This NASA low outgassing approved, silver filled system features low volume resistivity and high flexibility. Scroll through to learn more!
Electrically Conductive Epoxy Charges Ahead
Nickel filled epoxy system EP21TDCN-LO meets NASA low outgassing specifications and features excellent electrical conductivity. This adhesive and sealant is ideal for use grounding, shielding and static dissipation applications. Scroll through to learn more!
Adhesive Keeps Out UV Light & Lets Light In
Master Bond EP30-2LB epoxy system blocks UV light while allowing the transmission of visible light. This two part, optically clear compound meets NASA low outgassing specifications and features high optical clarity with a refractive index of 1.55.
The Highs & Lows of Thermal Management
One part epoxy, Supreme 18TC, contains a blend of special thermally conductive fillers allowing it to maintain outstanding heat transfer capabilities. This smooth paste system can be applied in bond lines as thin as 10-15 microns. Supreme 18TC features ultra low thermal resistance and meets NASA low outgassing specifications.
In the Clear: Epoxy System EP112LS
Master Bond EP112LS is a two part, optically clear system for impregnation, potting, encapsulation, sealing and coating applications. This compound features reliable non-yellowing properties and a refractive index of 1.55. It is ideal for use in aerospace and optoelectronics industries.
Newly Developed Products 2017 - Part 1
Browse though Master Bond's product highlights of 2017! These adhesives, sealants, coatings and encapsulation systems feature unique performance properties and many meet stringent industrial specifications.
More from Master Bond (20)
Top Adhesives for Cryogenic Applications and How They Have Been Used
Top Adhesives for Cryogenic Applications and How They Have Been Used
From Field to Factory, Adhesives for Food Processing Equipment
From Field to Factory, Adhesives for Food Processing Equipment
Tough Epoxy Polysulfide System Resists up to 350˚F
Tough Epoxy Polysulfide System Resists up to 350˚F
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
It's What's Inside That Counts - Nanosilica Filled Adhesives
It's What's Inside That Counts - Nanosilica Filled Adhesives
One Component, Non-Drip Adhesive for Structural Bonding
One Component, Non-Drip Adhesive for Structural Bonding
Toughened, Two Component, Room Temperature Curing Epoxy
Toughened, Two Component, Room Temperature Curing Epoxy
Recently uploaded
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S4 HANA to Public cloud data object differences
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Recently uploaded (20)
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Can your epoxy take the heat?
- 1. Hardness >80 Shore D Serviceable to +650°F Tensile strength 10,000 psi One part adhesive compound EP17HT-LO Tg Glass transition temperature 225°C Compressive strength >20,000 psi www.masterbond.com Hackensack, NJ 07601 USA • Tel: +1.201.343.8983 • main@masterbond.com ½in Castable up to ½ inch Low Outgassing Meets low outgassing specifications Volume resistivity >1015 ohm-cm Chemically resistant Viscosity 15,000-25,000 cps Cure schedule at 350°F 4-5 hours