For Long Lasting, Stable Connections
•
0 likes•695 views
View this infographic to learn about MasterSil 973S-LO, a two part silicone ideal for use in vacuum environments. This NASA low outgassing approved, silver filled system features low volume resistivity and high flexibility. Scroll through to learn more!
Report
Share
Report
Share
Download to read offline
Recommended
Adhesives for Sensor Applications
Choosing the most effective adhesive for an electronic application involving sensors is critical. Since sensors work by responding to outside environmental factors such as heat, light or motion, it is crucial to use an adhesive that will not impede on the components’ ability to gather outside information. Master Bond’s adhesive compounds for sensor applications assist in enhancing the performance properties of sensors with select grades offering impressive values of thermal conductivity, electrical conductivity, electrical insulation and more.
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
Ideal for Large Castings Master Bond EP29LPAO
This document describes the features and properties of Masterbond's EP29LPAO epoxy, including its long pot life of 7-9 hours at 75°F, high thermal conductivity of 9-10 BTU-in/ft2-hr-°F, and excellent electrical insulation with a volume resistivity over 1015 ohm-cm. It also highlights characteristics such as superb physical strength with tensile modulus between 450,000-500,000 psi and compressive strength of 24,000-26,000 psi, as well as low viscosity and good flow for large castings.
The Highs & Lows of Thermal Management
One part epoxy, Supreme 18TC, contains a blend of special thermally conductive fillers allowing it to maintain outstanding heat transfer capabilities. This smooth paste system can be applied in bond lines as thin as 10-15 microns. Supreme 18TC features ultra low thermal resistance and meets NASA low outgassing specifications.
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Does your silicone have a need for speed?
With an extraordinarily fast non-corrosive cure, Master Bond MasterSil 711 is ideal for bonding, sealing, coating and formed-in-place gaskets applications, especially those involving electronics. It is extremely soft with superb flexibility and elasticity and outstanding electrical insulation properties.
Can Your Epoxy Adhesive Go Low?
Masterbond's EP42HT-2LTE epoxy adhesive has an ultra-low coefficient of thermal expansion between 9-12 x 10-6 in/in/°C, low shrinkage upon cure of less than 0.01% linear and 0.1% volumetric with an elongation of less than 5%, and high dimensional stability from -60 to 300°F with a hardness of over 85 Shore D and tensile modulus of 400,000-500,000 psi, making it suitable for applications requiring stability over a wide range of temperatures.
Recommended
Adhesives for Sensor Applications
Choosing the most effective adhesive for an electronic application involving sensors is critical. Since sensors work by responding to outside environmental factors such as heat, light or motion, it is crucial to use an adhesive that will not impede on the components’ ability to gather outside information. Master Bond’s adhesive compounds for sensor applications assist in enhancing the performance properties of sensors with select grades offering impressive values of thermal conductivity, electrical conductivity, electrical insulation and more.
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
Ideal for Large Castings Master Bond EP29LPAO
This document describes the features and properties of Masterbond's EP29LPAO epoxy, including its long pot life of 7-9 hours at 75°F, high thermal conductivity of 9-10 BTU-in/ft2-hr-°F, and excellent electrical insulation with a volume resistivity over 1015 ohm-cm. It also highlights characteristics such as superb physical strength with tensile modulus between 450,000-500,000 psi and compressive strength of 24,000-26,000 psi, as well as low viscosity and good flow for large castings.
The Highs & Lows of Thermal Management
One part epoxy, Supreme 18TC, contains a blend of special thermally conductive fillers allowing it to maintain outstanding heat transfer capabilities. This smooth paste system can be applied in bond lines as thin as 10-15 microns. Supreme 18TC features ultra low thermal resistance and meets NASA low outgassing specifications.
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Does your silicone have a need for speed?
With an extraordinarily fast non-corrosive cure, Master Bond MasterSil 711 is ideal for bonding, sealing, coating and formed-in-place gaskets applications, especially those involving electronics. It is extremely soft with superb flexibility and elasticity and outstanding electrical insulation properties.
Can Your Epoxy Adhesive Go Low?
Masterbond's EP42HT-2LTE epoxy adhesive has an ultra-low coefficient of thermal expansion between 9-12 x 10-6 in/in/°C, low shrinkage upon cure of less than 0.01% linear and 0.1% volumetric with an elongation of less than 5%, and high dimensional stability from -60 to 300°F with a hardness of over 85 Shore D and tensile modulus of 400,000-500,000 psi, making it suitable for applications requiring stability over a wide range of temperatures.
Jmv corporate creada 2017 street light led
This document is a corporate presentation from JMV LPS Limited about earthing products and solutions for solar street lights. It discusses surge protection devices, earth enhancing compounds, copper clad steel conductors, earthing accessories, exothermic weld systems, and their business and clients. The presentation provides information on different classes of surge protection devices for various applications like direct lightning, voltage surges, data lines, power over ethernet, and solar circuits. It also highlights their product offerings and compliance with various standards.
Jmv corporate creada 2017 street light led
This document is a corporate presentation from JMV LPS Limited about earthing products and solutions for solar street lights. It discusses surge protection devices, earth enhancing compounds, copper clad steel conductors, earthing accessories, exothermic weld systems, and their business and clients. The presentation provides information on different classes of surge protection devices for various applications like direct lightning impulses, voltage surges, data lines, power over ethernet, and solar circuits.
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Nelson LLT Heat Tracing Cable - Spec Sheet
The document describes the Nelson Type LLT long line self-regulating heater, which uses a parallel, self-regulating conductive heating core that varies power output inversely with temperature. It can be continuously overlapped and cut to length without creating hot spots or changing power output. The heater is used for water freeze protection and low watt density process temperature piping systems on metal or plastic pipes in corrosive or hazardous environments.
Betaflam
Betaflam mineral insulated cable is fire resistant and can maintain circuit integrity when exposed to extreme heat and fire conditions, as tested by various international standards. It has applications in emergency wiring systems of high-rise buildings, hospitals, airports, and tunnels. The cable's mineral insulation and copper core allow it to withstand temperatures over 1000°C without causing short circuits or current interruptions, making it suitable for ensuring operational critical systems remain powered during fires. Prevention through the use of flame retardant and self-extinguishing materials is emphasized as the best approach to fire safety.
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...Thorne & Derrick International
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Grounding & Earth Braid Electrical TapesPerformance of 400 kv line insulators under pollution.
Electrical engineering power point presentation on Performance of 400 kv line insulators under pollution.
Aircraft Warning Light Cables
In order to deliver the energy required to light high intensity lights, lamps, and beacons, a careful selection of wire and cable is required The electrical wire delivering the charge to this system and its connection to the lamp play a vital role and work in harmony with each other to ensure circuit integrity and lights always illuminated. Many electrical wire and cable considerations include: Voltage rating, temperature rating, shielding, oil and moisture resistance, Standards Agency Requirements, armor requirements, routing considerations, UV resistance etc. lengths of cable, cable weight and finished diameter, voltage drop, etc.
Sound cable design considerations, and the
use of high quality state of the art
insulating materials, coupled with solid
American Craftsmanship greatly positively
influence the cables performance.
Thermal Wire has had great success with
the following 3 cable types:
Hybrid
Retractable systems
Stationary Shielded Power and Control Cables
LMK Thermosafe Inteliheat IBC Atex Heating Jacket Spec Sheet
The InteliHeat heating jacket is certified for use in hazardous areas and provides safe heating of IBC containers up to 55C. It has overall dimensions of 4300mm x 950mm x 20kg and can consume up to 7A and 1700W of power. The jacket uses a proprietary design with custom elastomer and glass cloth materials, as well as high density fiberglass insulation and carbon-rich semiconductor membranes to safely maintain operating temperatures even in potentially explosive environments.
Cable Spiker - Accles & Shelvoke
The Accles & Shelvoke Cable Spiker is a tool for safely de-energizing electric power cables before work is done on them. It can penetrate all types of cable coverings and is operated remotely via a lanyard for employee safety. If a live cable is spiked, the fault current will likely trip the circuit breaker without harming the tool. The Cable Spiker provides a safer alternative to manual spiking with hammers or sticks.
Armored HEI and Thermocouple cables
The document discusses Thermal Wire's armored multi-conductor cables for high energy ignition and thermocouples. The cables consist of individual conductors assembled into a core and protected by a flexible, sealed armor and jacket. This eliminates the need for separate installation of wires through conduit. The armor options include continuously welded and corrugated aluminum or stainless steel. Jacketing materials range from 200°C to 300°C and seal the armor. The cables are tested to various industry standards and come in various conductor, voltage, and temperature configurations. Thermal Wire provides a factory-assembled solution that reduces costs compared to individual wiring methods.
Wiretronic inc
We provide one of the most commonly used resistance wire for heating purposes. As you all know that nichrome wire is a non-magnetic alloy of nickel and chromium, so it is helpful in many cases when it comes to any useful appliances.
Housing Wiring | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wire | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wire | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wire | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wiring | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wiring | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Refractory glue
SCHAMOTTKLEBER HT 1100 has good adhesiveness on
fibrous products, on metals, fireclay brick and on all kinds
of construction materials.
It can be used for the following purposes:
- Fastening of thick string, glass fibre or ceramic fibre
tresses.
- Fastening of fireclay materials to metal parts exposed
to intense heat.
- Gluing of jacket tubes, sleeves and other fireclay parts
- designed to adhere insulating board
- Setting of fireclay bricks in stoves and heating units
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
Silver Filled Epoxy for Bonding & Die Attach Applications
Master Bond EP3HTS-TC is a super unique epoxy utilizing a non-sintering silver technology to provide ultra high heat transfer capability. This one part system does not require mixing and features an array of impressive performance properties ideal for die attach and specialty bonding applications. Browse this infographic to learn more.
From Field to Factory, Adhesives for Food Processing Equipment
Master Bond's line of adhesive compounds for the food processing industry conform to Title 21, U.S. Code of Federal Regulations, FDA Chapter 1, Section 175.105 requirements for food safety. These systems can be used in a variety of applications from storage tanks to containment vessels.
More Related Content
What's hot
Jmv corporate creada 2017 street light led
This document is a corporate presentation from JMV LPS Limited about earthing products and solutions for solar street lights. It discusses surge protection devices, earth enhancing compounds, copper clad steel conductors, earthing accessories, exothermic weld systems, and their business and clients. The presentation provides information on different classes of surge protection devices for various applications like direct lightning, voltage surges, data lines, power over ethernet, and solar circuits. It also highlights their product offerings and compliance with various standards.
Jmv corporate creada 2017 street light led
This document is a corporate presentation from JMV LPS Limited about earthing products and solutions for solar street lights. It discusses surge protection devices, earth enhancing compounds, copper clad steel conductors, earthing accessories, exothermic weld systems, and their business and clients. The presentation provides information on different classes of surge protection devices for various applications like direct lightning impulses, voltage surges, data lines, power over ethernet, and solar circuits.
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Nelson LLT Heat Tracing Cable - Spec Sheet
The document describes the Nelson Type LLT long line self-regulating heater, which uses a parallel, self-regulating conductive heating core that varies power output inversely with temperature. It can be continuously overlapped and cut to length without creating hot spots or changing power output. The heater is used for water freeze protection and low watt density process temperature piping systems on metal or plastic pipes in corrosive or hazardous environments.
Betaflam
Betaflam mineral insulated cable is fire resistant and can maintain circuit integrity when exposed to extreme heat and fire conditions, as tested by various international standards. It has applications in emergency wiring systems of high-rise buildings, hospitals, airports, and tunnels. The cable's mineral insulation and copper core allow it to withstand temperatures over 1000°C without causing short circuits or current interruptions, making it suitable for ensuring operational critical systems remain powered during fires. Prevention through the use of flame retardant and self-extinguishing materials is emphasized as the best approach to fire safety.
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...Thorne & Derrick International
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Grounding & Earth Braid Electrical TapesPerformance of 400 kv line insulators under pollution.
Electrical engineering power point presentation on Performance of 400 kv line insulators under pollution.
Aircraft Warning Light Cables
In order to deliver the energy required to light high intensity lights, lamps, and beacons, a careful selection of wire and cable is required The electrical wire delivering the charge to this system and its connection to the lamp play a vital role and work in harmony with each other to ensure circuit integrity and lights always illuminated. Many electrical wire and cable considerations include: Voltage rating, temperature rating, shielding, oil and moisture resistance, Standards Agency Requirements, armor requirements, routing considerations, UV resistance etc. lengths of cable, cable weight and finished diameter, voltage drop, etc.
Sound cable design considerations, and the
use of high quality state of the art
insulating materials, coupled with solid
American Craftsmanship greatly positively
influence the cables performance.
Thermal Wire has had great success with
the following 3 cable types:
Hybrid
Retractable systems
Stationary Shielded Power and Control Cables
LMK Thermosafe Inteliheat IBC Atex Heating Jacket Spec Sheet
The InteliHeat heating jacket is certified for use in hazardous areas and provides safe heating of IBC containers up to 55C. It has overall dimensions of 4300mm x 950mm x 20kg and can consume up to 7A and 1700W of power. The jacket uses a proprietary design with custom elastomer and glass cloth materials, as well as high density fiberglass insulation and carbon-rich semiconductor membranes to safely maintain operating temperatures even in potentially explosive environments.
Cable Spiker - Accles & Shelvoke
The Accles & Shelvoke Cable Spiker is a tool for safely de-energizing electric power cables before work is done on them. It can penetrate all types of cable coverings and is operated remotely via a lanyard for employee safety. If a live cable is spiked, the fault current will likely trip the circuit breaker without harming the tool. The Cable Spiker provides a safer alternative to manual spiking with hammers or sticks.
Armored HEI and Thermocouple cables
The document discusses Thermal Wire's armored multi-conductor cables for high energy ignition and thermocouples. The cables consist of individual conductors assembled into a core and protected by a flexible, sealed armor and jacket. This eliminates the need for separate installation of wires through conduit. The armor options include continuously welded and corrugated aluminum or stainless steel. Jacketing materials range from 200°C to 300°C and seal the armor. The cables are tested to various industry standards and come in various conductor, voltage, and temperature configurations. Thermal Wire provides a factory-assembled solution that reduces costs compared to individual wiring methods.
Wiretronic inc
We provide one of the most commonly used resistance wire for heating purposes. As you all know that nichrome wire is a non-magnetic alloy of nickel and chromium, so it is helpful in many cases when it comes to any useful appliances.
Housing Wiring | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wire | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wire | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wire | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wiring | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Housing Wiring | OLIVE CABLES
Olive Cables introduces our new range of exclusive Domestic Household Wires (Multistrand Cables) for residential purposes. Our Domestic Cabling and House Wiring products are assured and far exceed the ISI certifications.
http://olivecables.com/House-Wiring.aspx
http://olivecables.com/
Refractory glue
SCHAMOTTKLEBER HT 1100 has good adhesiveness on
fibrous products, on metals, fireclay brick and on all kinds
of construction materials.
It can be used for the following purposes:
- Fastening of thick string, glass fibre or ceramic fibre
tresses.
- Fastening of fireclay materials to metal parts exposed
to intense heat.
- Gluing of jacket tubes, sleeves and other fireclay parts
- designed to adhere insulating board
- Setting of fireclay bricks in stoves and heating units
What's hot (19)
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
Performance of 400 kv line insulators under pollution.
Performance of 400 kv line insulators under pollution.
LMK Thermosafe Inteliheat IBC Atex Heating Jacket Spec Sheet
LMK Thermosafe Inteliheat IBC Atex Heating Jacket Spec Sheet
More from Master Bond
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
Silver Filled Epoxy for Bonding & Die Attach Applications
Master Bond EP3HTS-TC is a super unique epoxy utilizing a non-sintering silver technology to provide ultra high heat transfer capability. This one part system does not require mixing and features an array of impressive performance properties ideal for die attach and specialty bonding applications. Browse this infographic to learn more.
From Field to Factory, Adhesives for Food Processing Equipment
Master Bond's line of adhesive compounds for the food processing industry conform to Title 21, U.S. Code of Federal Regulations, FDA Chapter 1, Section 175.105 requirements for food safety. These systems can be used in a variety of applications from storage tanks to containment vessels.
Low Outgassing Approved Adhesives Systems
This wide range of adhesive compounds meet NASA low outgassing specifications and feature their own unique set of high performance properties such as optical clarity, thermal conductivity, cryogenic serviceability and more. Browse through this infographic to learn about our top performing NASA low outgassing approved systems.
Medical Grade, UV Curable Adhesives Systems
Learn about our line of UV10 adhesives that meet USP Class VI approval for use in medical device manufacturing. These systems feature unique flow properties, along with optical clarity and fast curing times.
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Most effective underfill epoxies such as EP29LPTCHT have low viscosities and feature high dimensional stability as well as a low coefficient of thermal expansion. EP29LPTCHT also offers high thermal conductivity, electrical insulation and a high tensile modulus. Scroll through our infographic to learn more.
Tough Epoxy Polysulfide System Resists up to 350˚F
Master Bond EP21TPHT is an epoxy polysulfide compound that withstands temperatures up to 350°F - giving it a higher resistance to elevated temperatures than most polysulfide systems. Scroll through this infographic to learn more about this new chemically resistant, flexible system.
Master Bond Company Capabilities
Master Bond was founded in 1976 and formulates over 3,000 grades of adhesives, sealants, coatings, potting and encapsulation compounds that are certified for use across industries. They supply their compounds to top research universities and technology manufacturing companies in the world, with the compounds being applied in a variety of applications including optical assemblies, lasers, e-textiles, packaging, confocal microscopes, prosthetic devices, capacitors, aircraft, medical devices, and plasma physics research. Master Bond offers technical support throughout the design and manufacturing process to help engineers find the most suitable product.
Tough Enough for Harsh Chemicals
Master Bond EP21TP-2NV features superior thermal shock and chemical resistance while maintaining durable bonds to similar and dissimilar substrates. This tough compound is noted for its ability to withstand prolonged exposure to fuel and oils. EP21TP-2NV cures at ambient temperatures or more rapidly at elevated temperatures and can be applied without sagging.
Low CTE Epoxy for Precise Alignment
Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Scroll through to learn more.
It's What's Inside That Counts - Nanosilica Filled Adhesives
Learn about Master Bond’s nanosilica filled systems offering enhanced abrasion resistance and dimensional stability.
These specialty formulations feature superior physical properties as well as low shrinkage upon curing. View to learn more!
One Component, Non-Drip Adhesive for Structural Bonding
Serviceable up to +500°F, EP13SPND-2 is a one part epoxy paste for structural bonding applications. This electrically insulative system has a non-drip application feature that delivers high tensile, tensile lap shear and compressive strength of over 8,000 psi, 3,000 psi and 18,000 psi, respectively. It also offers superb dimensional stability and chemical resistance.
Toughened, Two Component, Room Temperature Curing Epoxy
Master Bond Supreme 11HT-3A epoxy features high performance properties including thermal cycling and high temperature resistance. This two part system is easy to handle with a convenient mix ratio and a long open time. Browse through this infographic to learn more.
Electrically Conductive Epoxy Charges Ahead
Nickel filled epoxy system EP21TDCN-LO meets NASA low outgassing specifications and features excellent electrical conductivity. This adhesive and sealant is ideal for use grounding, shielding and static dissipation applications. Scroll through to learn more!
Adhesive Keeps Out UV Light & Lets Light In
Master Bond EP30-2LB epoxy system blocks UV light while allowing the transmission of visible light. This two part, optically clear compound meets NASA low outgassing specifications and features high optical clarity with a refractive index of 1.55.
In the Clear: Epoxy System EP112LS
Master Bond EP112LS is a two part, optically clear system for impregnation, potting, encapsulation, sealing and coating applications. This compound features reliable non-yellowing properties and a refractive index of 1.55. It is ideal for use in aerospace and optoelectronics industries.
Super Toughened Epoxy Resists High Temperatures & Chemicals
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Newly Developed Products 2017 - Part 1
Browse though Master Bond's product highlights of 2017! These adhesives, sealants, coatings and encapsulation systems feature unique performance properties and many meet stringent industrial specifications.
Newly Developed Products 2017 - Part 2
Check out Master Bond's innovative product developments of 2017! Browse through our highlighted adhesive, sealant, coating and encapsulation compounds from this year.
One Part Epoxy Has Low CTE
Master Bond EP13LTE is a one part epoxy featuring a low coefficient of thermal expansion and high temperature resistance. This system is ideal for structural bonding applications where precise alignment is necessary. The following infographic highlights the exemplary properties of EP13LTE.
More from Master Bond (20)
Top Adhesives for Cryogenic Applications and How They Have Been Used
Top Adhesives for Cryogenic Applications and How They Have Been Used
Silver Filled Epoxy for Bonding & Die Attach Applications
Silver Filled Epoxy for Bonding & Die Attach Applications
From Field to Factory, Adhesives for Food Processing Equipment
From Field to Factory, Adhesives for Food Processing Equipment
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Tough Epoxy Polysulfide System Resists up to 350˚F
Tough Epoxy Polysulfide System Resists up to 350˚F
It's What's Inside That Counts - Nanosilica Filled Adhesives
It's What's Inside That Counts - Nanosilica Filled Adhesives
One Component, Non-Drip Adhesive for Structural Bonding
One Component, Non-Drip Adhesive for Structural Bonding
Toughened, Two Component, Room Temperature Curing Epoxy
Toughened, Two Component, Room Temperature Curing Epoxy
Super Toughened Epoxy Resists High Temperatures & Chemicals
Super Toughened Epoxy Resists High Temperatures & Chemicals
Recently uploaded
From Natural Language to Structured Solr Queries using LLMs
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Must Know Postgres Extension for DBA and Developer during Migration
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Available 24/7
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Discover how AI is transforming the workplace and learn strategies for reskilling and upskilling employees to stay ahead. This comprehensive guide covers the impact of AI on jobs, essential skills for the future, and successful case studies from industry leaders. Embrace AI-driven changes, foster continuous learning, and build a future-ready workforce.
Read More - https://bit.ly/3VKly70
Introducing BoxLang : A new JVM language for productivity and modularity!
Just like life, our code must adapt to the ever changing world we live in. From one day coding for the web, to the next for our tablets or APIs or for running serverless applications. Multi-runtime development is the future of coding, the future is to be dynamic. Let us introduce you to BoxLang.
Dynamic. Modular. Productive.
BoxLang redefines development with its dynamic nature, empowering developers to craft expressive and functional code effortlessly. Its modular architecture prioritizes flexibility, allowing for seamless integration into existing ecosystems.
Interoperability at its Core
With 100% interoperability with Java, BoxLang seamlessly bridges the gap between traditional and modern development paradigms, unlocking new possibilities for innovation and collaboration.
Multi-Runtime
From the tiny 2m operating system binary to running on our pure Java web server, CommandBox, Jakarta EE, AWS Lambda, Microsoft Functions, Web Assembly, Android and more. BoxLang has been designed to enhance and adapt according to it's runnable runtime.
The Fusion of Modernity and Tradition
Experience the fusion of modern features inspired by CFML, Node, Ruby, Kotlin, Java, and Clojure, combined with the familiarity of Java bytecode compilation, making BoxLang a language of choice for forward-thinking developers.
Empowering Transition with Transpiler Support
Transitioning from CFML to BoxLang is seamless with our JIT transpiler, facilitating smooth migration and preserving existing code investments.
Unlocking Creativity with IDE Tools
Unleash your creativity with powerful IDE tools tailored for BoxLang, providing an intuitive development experience and streamlining your workflow. Join us as we embark on a journey to redefine JVM development. Welcome to the era of BoxLang.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
Recently uploaded (20)
From Natural Language to Structured Solr Queries using LLMs
From Natural Language to Structured Solr Queries using LLMs
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
Must Know Postgres Extension for DBA and Developer during Migration
Must Know Postgres Extension for DBA and Developer during Migration
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Introducing BoxLang : A new JVM language for productivity and modularity!
Introducing BoxLang : A new JVM language for productivity and modularity!
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
For Long Lasting, Stable Connections
- 1. www.masterbond.com 154 Hobart St., Hackensack NJ, 07601 USA +1.201.343.8983 ∙ main@masterbond.com Stable Connections ForLong Lasting, ISOTROPIC, SILVER CONDUCTIVE SILICONE ADHESIVE MasterSil 973S-LO Electrically conductive Highly flexible Passes ASTM E595 tests Elongation of 50-100% Serviceable from -120°F to +400°F Greater than 1 inch Volume resistivity: 0.004 ohm-cm NASA low outgassing approved High temperature resistant Cures well in deep & wide sections