Silver Filled Epoxy for Bonding & Die Attach Applications
•
0 likes•126 views
Master Bond EP3HTS-TC is a super unique epoxy utilizing a non-sintering silver technology to provide ultra high heat transfer capability. This one part system does not require mixing and features an array of impressive performance properties ideal for die attach and specialty bonding applications. Browse this infographic to learn more.
Report
Share
Report
Share
Download to read offline
![for
Bonding &
Die Attach
Applications
ABOUT THE MATERIAL
One Part Epoxy
EP3HTS-TC
THERMAL CONDUCTIVITY
110-118 BTU•in/(ft²•hr•°F)
[16-17 W/(m•K)]
NOT PREMIXED AND FROZEN
NASA LOW OUTGASSING
VERY LONG OPEN TIME
AT ROOM TEMPERATURE
PERFORMANCE
PROPERTIES
HARDNESS, 75°F
60-70 Shore D
COEFFICIENT OF THERMAL
EXPANSION, 75°F
20-23 x 10-6
in/in/°C
VOLUME RESISTIVITY, 75°F
<1x10-6
ohm-cm
VISCOSITY, 75°F
Thixotropic paste
SERVICE TEMPERATURE
-80°F to +400°F
[-62°C to +204°C]
APPLICATION
AND CURING
THIXOTROPIC INDEX, 75°F
10
CURE SCHEDULE
15-20 minutes at 300°F
DIE SHEAR STRENGTH, 75°F
(2 X 2 MM [80 X 80 MIL])
9-12 kg-f
154 Hobart Street, Hackensack, NJ 07601 USA
+1.201.343.8983 • main@masterbond.com
www.masterbond.com](https://image.slidesharecdn.com/10107sm3-210728195915/85/Silver-Filled-Epoxy-for-Bonding-Die-Attach-Applications-1-320.jpg)
Recommended
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Most effective underfill epoxies such as EP29LPTCHT have low viscosities and feature high dimensional stability as well as a low coefficient of thermal expansion. EP29LPTCHT also offers high thermal conductivity, electrical insulation and a high tensile modulus. Scroll through our infographic to learn more.
One Component, Silver Filled Epoxy System
EP3HTS-LO is a fast curing, electrically conductive epoxy adhesive that is NASA low outgassing approved. It doesn’t require mixing, features an “unlimited” working life at room temperature and has a smooth thixotropic paste viscosity. This infographic clearly presents all the product property details at a glance, including its amazingly low volume resistivity and high thermal conductivity.
Can your epoxy take the heat?
Master Bond epoxy compound EP17HT-LO can beat the heat in your most demanding bonding, sealing, coating or casting applications. This one part, heat curing system features outstanding performance properties including serviceability up to +650°F. EP17HT-LO exhibits a high glass transition temperature of 225°C, very low exotherm upon curing and other noteworthy properties. Check out this infographic for more information!
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
Super Toughened Epoxy Resists High Temperatures & Chemicals
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Low Outgassing Approved Adhesives Systems
This wide range of adhesive compounds meet NASA low outgassing specifications and feature their own unique set of high performance properties such as optical clarity, thermal conductivity, cryogenic serviceability and more. Browse through this infographic to learn about our top performing NASA low outgassing approved systems.
Recommended
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Most effective underfill epoxies such as EP29LPTCHT have low viscosities and feature high dimensional stability as well as a low coefficient of thermal expansion. EP29LPTCHT also offers high thermal conductivity, electrical insulation and a high tensile modulus. Scroll through our infographic to learn more.
One Component, Silver Filled Epoxy System
EP3HTS-LO is a fast curing, electrically conductive epoxy adhesive that is NASA low outgassing approved. It doesn’t require mixing, features an “unlimited” working life at room temperature and has a smooth thixotropic paste viscosity. This infographic clearly presents all the product property details at a glance, including its amazingly low volume resistivity and high thermal conductivity.
Can your epoxy take the heat?
Master Bond epoxy compound EP17HT-LO can beat the heat in your most demanding bonding, sealing, coating or casting applications. This one part, heat curing system features outstanding performance properties including serviceability up to +650°F. EP17HT-LO exhibits a high glass transition temperature of 225°C, very low exotherm upon curing and other noteworthy properties. Check out this infographic for more information!
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
Super Toughened Epoxy Resists High Temperatures & Chemicals
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Epoxy Adhesive Offers Thermal Conductivity and Chemical Resistance
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Low Outgassing Approved Adhesives Systems
This wide range of adhesive compounds meet NASA low outgassing specifications and feature their own unique set of high performance properties such as optical clarity, thermal conductivity, cryogenic serviceability and more. Browse through this infographic to learn about our top performing NASA low outgassing approved systems.
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
The Highs & Lows of Thermal Management
One part epoxy, Supreme 18TC, contains a blend of special thermally conductive fillers allowing it to maintain outstanding heat transfer capabilities. This smooth paste system can be applied in bond lines as thin as 10-15 microns. Supreme 18TC features ultra low thermal resistance and meets NASA low outgassing specifications.
Ideal for Large Castings Master Bond EP29LPAO
This document describes the features and properties of Masterbond's EP29LPAO epoxy, including its long pot life of 7-9 hours at 75°F, high thermal conductivity of 9-10 BTU-in/ft2-hr-°F, and excellent electrical insulation with a volume resistivity over 1015 ohm-cm. It also highlights characteristics such as superb physical strength with tensile modulus between 450,000-500,000 psi and compressive strength of 24,000-26,000 psi, as well as low viscosity and good flow for large castings.
Rebar coupler
Rebar coupler,rebar splicing used to connect threaded rebar. OCEPO Thread Parallel Coupler provides a cost-effective, full strength joint and are amongst the most efficient and innovative mechanical splice available to the local construction industry where its applications are only limited to one's imaginations.
Thomson BSA Grease Brochure
This document summarizes grease options for lubricating ball and lead screw assemblies. It provides a lubrication selection chart that lists 5 grease types from BS&A, each formulated for different applications. The chart specifies maximum temperature limits, compatible mechanism materials, mechanical load suitability, temperature variation properties, and other specifications like vapor pressure and packaging options for each grease type. The document aims to help users choose the appropriate grease for their ball and lead screw assembly requirements.
3M Scotchcast Resin, Epoxy Resin 281
3M Scotchcast Electrical Resin 281 is a two-part, semi-flexible epoxy resin characterized by high temperature stability, flexibility, and thermal and electrical properties. It can be cured at low temperatures but optimal properties are obtained at higher cure temperatures. Applications include impregnation and encapsulation of electrical components to provide greater mechanical strength, tensile strength, thermal shock resistance, and thermal conductivity compared to other resins.
Data of ceramic wear linings and lab
As a professional factory in China, we are manufacturing and exporting the below products since 1997.
1.92%,95%,T95%,99% Alumina ceramic tiles
2.ZTA(Zirconia Toughened Alumina) tiles/brick/block
3.Ceramic Rubber and Rubber-steel impact resistant linings
4.380/466/1000mm Cyclone for mining&mineral processing
5.Ceramic wearing compound for reparing
6.PU liner and PU products
12777 coastal single pages part18
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. A cutting tool allows for high speed installation with pre-set blades for an accurate cut. The weatherseals are available in black, white, brown and grey and have a lifetime guarantee.
50 3100 r
50-3100 is a high thermal conductivity epoxy resin designed for fast heat transfer applications. It has several times higher heat dissipation than other resins and can be easily mixed and poured. It exceeds military thermal shock requirements while maintaining low expansion. Typical applications include encapsulating electronics to transfer heat. The resin is available with different curing agents - Catalyst 190 for room temperature curing, Catalyst 150 for low viscosity and adhesion up to 150C, and Catalyst 105 for heat curing and highest temperature resistance up to 205C.
The Hotfoil-EHS Fusion45 Induction Heater
Induction heating can improve your bottom line by decreasing weld failures, and decreasing setup and tear down times. The technology allows for accurate temp control, without heavy electrical service or complicated controls. The portability and ease of use will allow you to heat more welds faster.
מדפסת תלת מימד למתכות (3D Systems)
The document summarizes the key features and capabilities of SLS-METALS, a metal laser sintering 3D printing process and system from 3D Systems. It describes the patented powder layering system, integrated powder handling, and imaging system. It highlights the ability to 3D print a variety of metal and ceramic materials, including reactive metals, with excellent surface finish, accuracy, and mechanical properties comparable or superior to traditional manufacturing methods. Applications discussed include dental implants, automotive molds, blow molds, molds and dies, aerospace parts, and R&D prototypes.
Pipeseal data sheet
PIPESEAL is an epoxy paste designed to quickly seal cracks, holes, and leaks in pipes made of materials like copper, steel, lead, and cast iron. It hardens within 5 minutes when applied and heated with a heat gun. PIPESEAL is 100% solids with no VOCs, making it environmentally friendly. It can seal leaks up to 1/2 inch in diameter and withstand pressures over 1200 psi. To use, the resin and hardener must be thoroughly mixed together and applied to the leak, then heated to cure fully within minutes.
catalogue
we are manufacture of laminate flooring, spc flooring and mdf hdf hpl board.we can export to all over the world.
Denso 80 ehss
The document provides application instructions for Denso 80 Epoxy Heat Shrink Sleeve, a coating system for corrosion protection of field joints on pipelines operating at temperatures up to 80°C. The instructions describe 15 steps for surface preparation including beveling, cleaning, heating and abrasive blasting the joint area, applying a Denso epoxy primer, positioning and wrapping the heat shrink sleeve, shrinking and rolling the sleeve, and inspecting the final installation. Safety equipment and storage instructions are also provided.
Calor syn
LIQTRO CALOR SYN is a fully balanced heat transfer fluid that can deliver heat up to 320°C. It has excellent thermal stability and oxidation resistance allowing safe use at high temperatures. It also has high specific heat and thermal conductivity for rapid and flexible heating in closed fluid systems. The fluid has a flash point of 220°C, density of 0.8324 kg/l, and viscosity suitable for use up to 100°C without significant increase. It presents minimal health, environmental, or physical hazards when handled and stored properly between -22.5°C and 50°C.
NERMAT® AF
The insulating covering agent for ingots.
NERMAT® AF's excellent insulating properties guarantee a slow solidification of the ingot top and a higher amount of impurities can be eliminated from the steel.
UBP
The document introduces several new building construction products from UltraTech Cement including waterproofing, plastering, jointing, and grouting materials. Key features and test results showing the performance advantages of these products over traditional alternatives are provided. These include greater strength, reduced curing times, higher coverage rates, and less wastage. Product specifications, pricing, and coverage details are also included.
ESCO ATLANTIC - Epoxy Cool Roof System
ESCOAtlantic’s solution for replacing old roofs, reducing roof heat sinks, and interior hot temperatures is the installation of Epoxy Cool Roof Systems (ECRS). This reflective 20 year warranted Epoxy Cool Roof System (ECRS) product encapsulates and preserve your roof permanently, saving you money, and keeping your roof cool during the hot summer.
Akfix c920 easf chemical anchor (styrene free),354 ml
Akfix c920 easf chemical anchor (styrene free),354 ml
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
From Field to Factory, Adhesives for Food Processing Equipment
Master Bond's line of adhesive compounds for the food processing industry conform to Title 21, U.S. Code of Federal Regulations, FDA Chapter 1, Section 175.105 requirements for food safety. These systems can be used in a variety of applications from storage tanks to containment vessels.
Adhesives for Sensor Applications
Choosing the most effective adhesive for an electronic application involving sensors is critical. Since sensors work by responding to outside environmental factors such as heat, light or motion, it is crucial to use an adhesive that will not impede on the components’ ability to gather outside information. Master Bond’s adhesive compounds for sensor applications assist in enhancing the performance properties of sensors with select grades offering impressive values of thermal conductivity, electrical conductivity, electrical insulation and more.
More Related Content
What's hot
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
The Highs & Lows of Thermal Management
One part epoxy, Supreme 18TC, contains a blend of special thermally conductive fillers allowing it to maintain outstanding heat transfer capabilities. This smooth paste system can be applied in bond lines as thin as 10-15 microns. Supreme 18TC features ultra low thermal resistance and meets NASA low outgassing specifications.
Ideal for Large Castings Master Bond EP29LPAO
This document describes the features and properties of Masterbond's EP29LPAO epoxy, including its long pot life of 7-9 hours at 75°F, high thermal conductivity of 9-10 BTU-in/ft2-hr-°F, and excellent electrical insulation with a volume resistivity over 1015 ohm-cm. It also highlights characteristics such as superb physical strength with tensile modulus between 450,000-500,000 psi and compressive strength of 24,000-26,000 psi, as well as low viscosity and good flow for large castings.
Rebar coupler
Rebar coupler,rebar splicing used to connect threaded rebar. OCEPO Thread Parallel Coupler provides a cost-effective, full strength joint and are amongst the most efficient and innovative mechanical splice available to the local construction industry where its applications are only limited to one's imaginations.
Thomson BSA Grease Brochure
This document summarizes grease options for lubricating ball and lead screw assemblies. It provides a lubrication selection chart that lists 5 grease types from BS&A, each formulated for different applications. The chart specifies maximum temperature limits, compatible mechanism materials, mechanical load suitability, temperature variation properties, and other specifications like vapor pressure and packaging options for each grease type. The document aims to help users choose the appropriate grease for their ball and lead screw assembly requirements.
3M Scotchcast Resin, Epoxy Resin 281
3M Scotchcast Electrical Resin 281 is a two-part, semi-flexible epoxy resin characterized by high temperature stability, flexibility, and thermal and electrical properties. It can be cured at low temperatures but optimal properties are obtained at higher cure temperatures. Applications include impregnation and encapsulation of electrical components to provide greater mechanical strength, tensile strength, thermal shock resistance, and thermal conductivity compared to other resins.
Data of ceramic wear linings and lab
As a professional factory in China, we are manufacturing and exporting the below products since 1997.
1.92%,95%,T95%,99% Alumina ceramic tiles
2.ZTA(Zirconia Toughened Alumina) tiles/brick/block
3.Ceramic Rubber and Rubber-steel impact resistant linings
4.380/466/1000mm Cyclone for mining&mineral processing
5.Ceramic wearing compound for reparing
6.PU liner and PU products
12777 coastal single pages part18
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. A cutting tool allows for high speed installation with pre-set blades for an accurate cut. The weatherseals are available in black, white, brown and grey and have a lifetime guarantee.
50 3100 r
50-3100 is a high thermal conductivity epoxy resin designed for fast heat transfer applications. It has several times higher heat dissipation than other resins and can be easily mixed and poured. It exceeds military thermal shock requirements while maintaining low expansion. Typical applications include encapsulating electronics to transfer heat. The resin is available with different curing agents - Catalyst 190 for room temperature curing, Catalyst 150 for low viscosity and adhesion up to 150C, and Catalyst 105 for heat curing and highest temperature resistance up to 205C.
The Hotfoil-EHS Fusion45 Induction Heater
Induction heating can improve your bottom line by decreasing weld failures, and decreasing setup and tear down times. The technology allows for accurate temp control, without heavy electrical service or complicated controls. The portability and ease of use will allow you to heat more welds faster.
מדפסת תלת מימד למתכות (3D Systems)
The document summarizes the key features and capabilities of SLS-METALS, a metal laser sintering 3D printing process and system from 3D Systems. It describes the patented powder layering system, integrated powder handling, and imaging system. It highlights the ability to 3D print a variety of metal and ceramic materials, including reactive metals, with excellent surface finish, accuracy, and mechanical properties comparable or superior to traditional manufacturing methods. Applications discussed include dental implants, automotive molds, blow molds, molds and dies, aerospace parts, and R&D prototypes.
Pipeseal data sheet
PIPESEAL is an epoxy paste designed to quickly seal cracks, holes, and leaks in pipes made of materials like copper, steel, lead, and cast iron. It hardens within 5 minutes when applied and heated with a heat gun. PIPESEAL is 100% solids with no VOCs, making it environmentally friendly. It can seal leaks up to 1/2 inch in diameter and withstand pressures over 1200 psi. To use, the resin and hardener must be thoroughly mixed together and applied to the leak, then heated to cure fully within minutes.
catalogue
we are manufacture of laminate flooring, spc flooring and mdf hdf hpl board.we can export to all over the world.
Denso 80 ehss
The document provides application instructions for Denso 80 Epoxy Heat Shrink Sleeve, a coating system for corrosion protection of field joints on pipelines operating at temperatures up to 80°C. The instructions describe 15 steps for surface preparation including beveling, cleaning, heating and abrasive blasting the joint area, applying a Denso epoxy primer, positioning and wrapping the heat shrink sleeve, shrinking and rolling the sleeve, and inspecting the final installation. Safety equipment and storage instructions are also provided.
Calor syn
LIQTRO CALOR SYN is a fully balanced heat transfer fluid that can deliver heat up to 320°C. It has excellent thermal stability and oxidation resistance allowing safe use at high temperatures. It also has high specific heat and thermal conductivity for rapid and flexible heating in closed fluid systems. The fluid has a flash point of 220°C, density of 0.8324 kg/l, and viscosity suitable for use up to 100°C without significant increase. It presents minimal health, environmental, or physical hazards when handled and stored properly between -22.5°C and 50°C.
NERMAT® AF
The insulating covering agent for ingots.
NERMAT® AF's excellent insulating properties guarantee a slow solidification of the ingot top and a higher amount of impurities can be eliminated from the steel.
UBP
The document introduces several new building construction products from UltraTech Cement including waterproofing, plastering, jointing, and grouting materials. Key features and test results showing the performance advantages of these products over traditional alternatives are provided. These include greater strength, reduced curing times, higher coverage rates, and less wastage. Product specifications, pricing, and coverage details are also included.
ESCO ATLANTIC - Epoxy Cool Roof System
ESCOAtlantic’s solution for replacing old roofs, reducing roof heat sinks, and interior hot temperatures is the installation of Epoxy Cool Roof Systems (ECRS). This reflective 20 year warranted Epoxy Cool Roof System (ECRS) product encapsulates and preserve your roof permanently, saving you money, and keeping your roof cool during the hot summer.
Akfix c920 easf chemical anchor (styrene free),354 ml
Akfix c920 easf chemical anchor (styrene free),354 ml
What's hot (19)
Akfix c920 easf chemical anchor (styrene free),354 ml
Akfix c920 easf chemical anchor (styrene free),354 ml
More from Master Bond
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
From Field to Factory, Adhesives for Food Processing Equipment
Master Bond's line of adhesive compounds for the food processing industry conform to Title 21, U.S. Code of Federal Regulations, FDA Chapter 1, Section 175.105 requirements for food safety. These systems can be used in a variety of applications from storage tanks to containment vessels.
Adhesives for Sensor Applications
Choosing the most effective adhesive for an electronic application involving sensors is critical. Since sensors work by responding to outside environmental factors such as heat, light or motion, it is crucial to use an adhesive that will not impede on the components’ ability to gather outside information. Master Bond’s adhesive compounds for sensor applications assist in enhancing the performance properties of sensors with select grades offering impressive values of thermal conductivity, electrical conductivity, electrical insulation and more.
Medical Grade, UV Curable Adhesives Systems
Learn about our line of UV10 adhesives that meet USP Class VI approval for use in medical device manufacturing. These systems feature unique flow properties, along with optical clarity and fast curing times.
Tough Epoxy Polysulfide System Resists up to 350˚F
Master Bond EP21TPHT is an epoxy polysulfide compound that withstands temperatures up to 350°F - giving it a higher resistance to elevated temperatures than most polysulfide systems. Scroll through this infographic to learn more about this new chemically resistant, flexible system.
Master Bond Company Capabilities
Master Bond was founded in 1976 and formulates over 3,000 grades of adhesives, sealants, coatings, potting and encapsulation compounds that are certified for use across industries. They supply their compounds to top research universities and technology manufacturing companies in the world, with the compounds being applied in a variety of applications including optical assemblies, lasers, e-textiles, packaging, confocal microscopes, prosthetic devices, capacitors, aircraft, medical devices, and plasma physics research. Master Bond offers technical support throughout the design and manufacturing process to help engineers find the most suitable product.
Tough Enough for Harsh Chemicals
Master Bond EP21TP-2NV features superior thermal shock and chemical resistance while maintaining durable bonds to similar and dissimilar substrates. This tough compound is noted for its ability to withstand prolonged exposure to fuel and oils. EP21TP-2NV cures at ambient temperatures or more rapidly at elevated temperatures and can be applied without sagging.
Low CTE Epoxy for Precise Alignment
Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Scroll through to learn more.
It's What's Inside That Counts - Nanosilica Filled Adhesives
Learn about Master Bond’s nanosilica filled systems offering enhanced abrasion resistance and dimensional stability.
These specialty formulations feature superior physical properties as well as low shrinkage upon curing. View to learn more!
One Component, Non-Drip Adhesive for Structural Bonding
Serviceable up to +500°F, EP13SPND-2 is a one part epoxy paste for structural bonding applications. This electrically insulative system has a non-drip application feature that delivers high tensile, tensile lap shear and compressive strength of over 8,000 psi, 3,000 psi and 18,000 psi, respectively. It also offers superb dimensional stability and chemical resistance.
Toughened, Two Component, Room Temperature Curing Epoxy
Master Bond Supreme 11HT-3A epoxy features high performance properties including thermal cycling and high temperature resistance. This two part system is easy to handle with a convenient mix ratio and a long open time. Browse through this infographic to learn more.
For Long Lasting, Stable Connections
View this infographic to learn about MasterSil 973S-LO, a two part silicone ideal for use in vacuum environments. This NASA low outgassing approved, silver filled system features low volume resistivity and high flexibility. Scroll through to learn more!
Electrically Conductive Epoxy Charges Ahead
Nickel filled epoxy system EP21TDCN-LO meets NASA low outgassing specifications and features excellent electrical conductivity. This adhesive and sealant is ideal for use grounding, shielding and static dissipation applications. Scroll through to learn more!
Adhesive Keeps Out UV Light & Lets Light In
Master Bond EP30-2LB epoxy system blocks UV light while allowing the transmission of visible light. This two part, optically clear compound meets NASA low outgassing specifications and features high optical clarity with a refractive index of 1.55.
In the Clear: Epoxy System EP112LS
Master Bond EP112LS is a two part, optically clear system for impregnation, potting, encapsulation, sealing and coating applications. This compound features reliable non-yellowing properties and a refractive index of 1.55. It is ideal for use in aerospace and optoelectronics industries.
Newly Developed Products 2017 - Part 1
Browse though Master Bond's product highlights of 2017! These adhesives, sealants, coatings and encapsulation systems feature unique performance properties and many meet stringent industrial specifications.
Newly Developed Products 2017 - Part 2
Check out Master Bond's innovative product developments of 2017! Browse through our highlighted adhesive, sealant, coating and encapsulation compounds from this year.
One Part Epoxy Has Low CTE
Master Bond EP13LTE is a one part epoxy featuring a low coefficient of thermal expansion and high temperature resistance. This system is ideal for structural bonding applications where precise alignment is necessary. The following infographic highlights the exemplary properties of EP13LTE.
Newly Developed Products 2016 - Part 3
This document introduces several newly developed products from 2016, including a supreme-grade epoxy with chemical, abrasion and heat resistance, a nickel-conductive epoxy that meets NASA outgassing specifications, a UV-curable system with abrasion resistance and flexibility, a silver-filled silicone that meets NASA outgassing specifications, and a chemical-resistant epoxy with a high glass transition temperature. Contact information is provided at the end.
More from Master Bond (20)
Top Adhesives for Cryogenic Applications and How They Have Been Used
Top Adhesives for Cryogenic Applications and How They Have Been Used
From Field to Factory, Adhesives for Food Processing Equipment
From Field to Factory, Adhesives for Food Processing Equipment
Tough Epoxy Polysulfide System Resists up to 350˚F
Tough Epoxy Polysulfide System Resists up to 350˚F
It's What's Inside That Counts - Nanosilica Filled Adhesives
It's What's Inside That Counts - Nanosilica Filled Adhesives
One Component, Non-Drip Adhesive for Structural Bonding
One Component, Non-Drip Adhesive for Structural Bonding
Toughened, Two Component, Room Temperature Curing Epoxy
Toughened, Two Component, Room Temperature Curing Epoxy
Recently uploaded
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Finale of the Year: Apply for Next One!
Presentation for the event called "Finale of the Year: Apply for Next One!" organized by GDSC PJATK
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Recently uploaded (20)
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Silver Filled Epoxy for Bonding & Die Attach Applications
- 1. for Bonding & Die Attach Applications ABOUT THE MATERIAL One Part Epoxy EP3HTS-TC THERMAL CONDUCTIVITY 110-118 BTU•in/(ft²•hr•°F) [16-17 W/(m•K)] NOT PREMIXED AND FROZEN NASA LOW OUTGASSING VERY LONG OPEN TIME AT ROOM TEMPERATURE PERFORMANCE PROPERTIES HARDNESS, 75°F 60-70 Shore D COEFFICIENT OF THERMAL EXPANSION, 75°F 20-23 x 10-6 in/in/°C VOLUME RESISTIVITY, 75°F <1x10-6 ohm-cm VISCOSITY, 75°F Thixotropic paste SERVICE TEMPERATURE -80°F to +400°F [-62°C to +204°C] APPLICATION AND CURING THIXOTROPIC INDEX, 75°F 10 CURE SCHEDULE 15-20 minutes at 300°F DIE SHEAR STRENGTH, 75°F (2 X 2 MM [80 X 80 MIL]) 9-12 kg-f 154 Hobart Street, Hackensack, NJ 07601 USA +1.201.343.8983 • main@masterbond.com www.masterbond.com