From Field to Factory, Adhesives for Food Processing Equipment
•
0 likes•90 views
Master Bond's line of adhesive compounds for the food processing industry conform to Title 21, U.S. Code of Federal Regulations, FDA Chapter 1, Section 175.105 requirements for food safety. These systems can be used in a variety of applications from storage tanks to containment vessels.
Report
Share
Report
Share
Download to read offline
Recommended
Allplex fmg-us-series Mr Tùng - 0987 988 407 | www.khodaumo.com
The ALLPLEX FMG US Series are aluminum complex thickened semi-synthetic greases created for food, beverage, and pharmaceutical applications. They provide excellent wear protection, water resistance over a broad temperature range, and prevent corrosion and oxidation. Special additives help the greases stay in place during wash-down cycles, improving equipment life. The greases are ideal for lubricating production equipment in various food processing operations and may be applied by brush or grease gun. Proper cleaning is required for maximum hygiene for H1 lubrication approval.
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
Silver Filled Epoxy for Bonding & Die Attach Applications
Master Bond EP3HTS-TC is a super unique epoxy utilizing a non-sintering silver technology to provide ultra high heat transfer capability. This one part system does not require mixing and features an array of impressive performance properties ideal for die attach and specialty bonding applications. Browse this infographic to learn more.
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
Low Outgassing Approved Adhesives Systems
This wide range of adhesive compounds meet NASA low outgassing specifications and feature their own unique set of high performance properties such as optical clarity, thermal conductivity, cryogenic serviceability and more. Browse through this infographic to learn about our top performing NASA low outgassing approved systems.
Adhesives for Sensor Applications
Choosing the most effective adhesive for an electronic application involving sensors is critical. Since sensors work by responding to outside environmental factors such as heat, light or motion, it is crucial to use an adhesive that will not impede on the components’ ability to gather outside information. Master Bond’s adhesive compounds for sensor applications assist in enhancing the performance properties of sensors with select grades offering impressive values of thermal conductivity, electrical conductivity, electrical insulation and more.
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Medical Grade, UV Curable Adhesives Systems
Learn about our line of UV10 adhesives that meet USP Class VI approval for use in medical device manufacturing. These systems feature unique flow properties, along with optical clarity and fast curing times.
Recommended
Allplex fmg-us-series Mr Tùng - 0987 988 407 | www.khodaumo.com
The ALLPLEX FMG US Series are aluminum complex thickened semi-synthetic greases created for food, beverage, and pharmaceutical applications. They provide excellent wear protection, water resistance over a broad temperature range, and prevent corrosion and oxidation. Special additives help the greases stay in place during wash-down cycles, improving equipment life. The greases are ideal for lubricating production equipment in various food processing operations and may be applied by brush or grease gun. Proper cleaning is required for maximum hygiene for H1 lubrication approval.
Top Adhesives for Cryogenic Applications and How They Have Been Used
See below how Master Bond’s cryogenic adhesives have been utilized in various commercial and research applications worldwide.
Silver Filled Epoxy for Bonding & Die Attach Applications
Master Bond EP3HTS-TC is a super unique epoxy utilizing a non-sintering silver technology to provide ultra high heat transfer capability. This one part system does not require mixing and features an array of impressive performance properties ideal for die attach and specialty bonding applications. Browse this infographic to learn more.
Low Outgassing Silicone Adhesives
This infographic highlights one and two component silicone systems that pass ASTM E595 testing for NASA low outgassing. These compounds offer a variety of viscosities and boast high physical, thermal and electrical performance properties.
Low Outgassing Approved Adhesives Systems
This wide range of adhesive compounds meet NASA low outgassing specifications and feature their own unique set of high performance properties such as optical clarity, thermal conductivity, cryogenic serviceability and more. Browse through this infographic to learn about our top performing NASA low outgassing approved systems.
Adhesives for Sensor Applications
Choosing the most effective adhesive for an electronic application involving sensors is critical. Since sensors work by responding to outside environmental factors such as heat, light or motion, it is crucial to use an adhesive that will not impede on the components’ ability to gather outside information. Master Bond’s adhesive compounds for sensor applications assist in enhancing the performance properties of sensors with select grades offering impressive values of thermal conductivity, electrical conductivity, electrical insulation and more.
Low Viscosity Coating Features Superior Acid Resistance
This document describes the features and specifications of an epoxy coating called EP21ARLV. It has superior acid resistance and was tested in several acids for over 14 months with no failures. It is a low viscosity, two component epoxy that is ideal for small potting and encapsulation applications. It provides reliable electrical insulation and bonds well to many substrates including composites, plastics, ceramics, metals and rubbers.
Medical Grade, UV Curable Adhesives Systems
Learn about our line of UV10 adhesives that meet USP Class VI approval for use in medical device manufacturing. These systems feature unique flow properties, along with optical clarity and fast curing times.
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Most effective underfill epoxies such as EP29LPTCHT have low viscosities and feature high dimensional stability as well as a low coefficient of thermal expansion. EP29LPTCHT also offers high thermal conductivity, electrical insulation and a high tensile modulus. Scroll through our infographic to learn more.
Tough Epoxy Polysulfide System Resists up to 350˚F
Master Bond EP21TPHT is an epoxy polysulfide compound that withstands temperatures up to 350°F - giving it a higher resistance to elevated temperatures than most polysulfide systems. Scroll through this infographic to learn more about this new chemically resistant, flexible system.
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
Master Bond Company Capabilities
Master Bond was founded in 1976 and formulates over 3,000 grades of adhesives, sealants, coatings, potting and encapsulation compounds that are certified for use across industries. They supply their compounds to top research universities and technology manufacturing companies in the world, with the compounds being applied in a variety of applications including optical assemblies, lasers, e-textiles, packaging, confocal microscopes, prosthetic devices, capacitors, aircraft, medical devices, and plasma physics research. Master Bond offers technical support throughout the design and manufacturing process to help engineers find the most suitable product.
Tough Enough for Harsh Chemicals
Master Bond EP21TP-2NV features superior thermal shock and chemical resistance while maintaining durable bonds to similar and dissimilar substrates. This tough compound is noted for its ability to withstand prolonged exposure to fuel and oils. EP21TP-2NV cures at ambient temperatures or more rapidly at elevated temperatures and can be applied without sagging.
Low CTE Epoxy for Precise Alignment
Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Scroll through to learn more.
It's What's Inside That Counts - Nanosilica Filled Adhesives
Learn about Master Bond’s nanosilica filled systems offering enhanced abrasion resistance and dimensional stability.
These specialty formulations feature superior physical properties as well as low shrinkage upon curing. View to learn more!
One Component, Non-Drip Adhesive for Structural Bonding
Serviceable up to +500°F, EP13SPND-2 is a one part epoxy paste for structural bonding applications. This electrically insulative system has a non-drip application feature that delivers high tensile, tensile lap shear and compressive strength of over 8,000 psi, 3,000 psi and 18,000 psi, respectively. It also offers superb dimensional stability and chemical resistance.
Toughened, Two Component, Room Temperature Curing Epoxy
Master Bond Supreme 11HT-3A epoxy features high performance properties including thermal cycling and high temperature resistance. This two part system is easy to handle with a convenient mix ratio and a long open time. Browse through this infographic to learn more.
For Long Lasting, Stable Connections
View this infographic to learn about MasterSil 973S-LO, a two part silicone ideal for use in vacuum environments. This NASA low outgassing approved, silver filled system features low volume resistivity and high flexibility. Scroll through to learn more!
Electrically Conductive Epoxy Charges Ahead
Nickel filled epoxy system EP21TDCN-LO meets NASA low outgassing specifications and features excellent electrical conductivity. This adhesive and sealant is ideal for use grounding, shielding and static dissipation applications. Scroll through to learn more!
Adhesive Keeps Out UV Light & Lets Light In
Master Bond EP30-2LB epoxy system blocks UV light while allowing the transmission of visible light. This two part, optically clear compound meets NASA low outgassing specifications and features high optical clarity with a refractive index of 1.55.
The Highs & Lows of Thermal Management
One part epoxy, Supreme 18TC, contains a blend of special thermally conductive fillers allowing it to maintain outstanding heat transfer capabilities. This smooth paste system can be applied in bond lines as thin as 10-15 microns. Supreme 18TC features ultra low thermal resistance and meets NASA low outgassing specifications.
In the Clear: Epoxy System EP112LS
Master Bond EP112LS is a two part, optically clear system for impregnation, potting, encapsulation, sealing and coating applications. This compound features reliable non-yellowing properties and a refractive index of 1.55. It is ideal for use in aerospace and optoelectronics industries.
Super Toughened Epoxy Resists High Temperatures & Chemicals
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Newly Developed Products 2017 - Part 1
Browse though Master Bond's product highlights of 2017! These adhesives, sealants, coatings and encapsulation systems feature unique performance properties and many meet stringent industrial specifications.
Newly Developed Products 2017 - Part 2
Check out Master Bond's innovative product developments of 2017! Browse through our highlighted adhesive, sealant, coating and encapsulation compounds from this year.
One Part Epoxy Has Low CTE
Master Bond EP13LTE is a one part epoxy featuring a low coefficient of thermal expansion and high temperature resistance. This system is ideal for structural bonding applications where precise alignment is necessary. The following infographic highlights the exemplary properties of EP13LTE.
Newly Developed Products 2016 - Part 3
This document introduces several newly developed products from 2016, including a supreme-grade epoxy with chemical, abrasion and heat resistance, a nickel-conductive epoxy that meets NASA outgassing specifications, a UV-curable system with abrasion resistance and flexibility, a silver-filled silicone that meets NASA outgassing specifications, and a chemical-resistant epoxy with a high glass transition temperature. Contact information is provided at the end.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
More Related Content
More from Master Bond
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Most effective underfill epoxies such as EP29LPTCHT have low viscosities and feature high dimensional stability as well as a low coefficient of thermal expansion. EP29LPTCHT also offers high thermal conductivity, electrical insulation and a high tensile modulus. Scroll through our infographic to learn more.
Tough Epoxy Polysulfide System Resists up to 350˚F
Master Bond EP21TPHT is an epoxy polysulfide compound that withstands temperatures up to 350°F - giving it a higher resistance to elevated temperatures than most polysulfide systems. Scroll through this infographic to learn more about this new chemically resistant, flexible system.
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
Master Bond Company Capabilities
Master Bond was founded in 1976 and formulates over 3,000 grades of adhesives, sealants, coatings, potting and encapsulation compounds that are certified for use across industries. They supply their compounds to top research universities and technology manufacturing companies in the world, with the compounds being applied in a variety of applications including optical assemblies, lasers, e-textiles, packaging, confocal microscopes, prosthetic devices, capacitors, aircraft, medical devices, and plasma physics research. Master Bond offers technical support throughout the design and manufacturing process to help engineers find the most suitable product.
Tough Enough for Harsh Chemicals
Master Bond EP21TP-2NV features superior thermal shock and chemical resistance while maintaining durable bonds to similar and dissimilar substrates. This tough compound is noted for its ability to withstand prolonged exposure to fuel and oils. EP21TP-2NV cures at ambient temperatures or more rapidly at elevated temperatures and can be applied without sagging.
Low CTE Epoxy for Precise Alignment
Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Scroll through to learn more.
It's What's Inside That Counts - Nanosilica Filled Adhesives
Learn about Master Bond’s nanosilica filled systems offering enhanced abrasion resistance and dimensional stability.
These specialty formulations feature superior physical properties as well as low shrinkage upon curing. View to learn more!
One Component, Non-Drip Adhesive for Structural Bonding
Serviceable up to +500°F, EP13SPND-2 is a one part epoxy paste for structural bonding applications. This electrically insulative system has a non-drip application feature that delivers high tensile, tensile lap shear and compressive strength of over 8,000 psi, 3,000 psi and 18,000 psi, respectively. It also offers superb dimensional stability and chemical resistance.
Toughened, Two Component, Room Temperature Curing Epoxy
Master Bond Supreme 11HT-3A epoxy features high performance properties including thermal cycling and high temperature resistance. This two part system is easy to handle with a convenient mix ratio and a long open time. Browse through this infographic to learn more.
For Long Lasting, Stable Connections
View this infographic to learn about MasterSil 973S-LO, a two part silicone ideal for use in vacuum environments. This NASA low outgassing approved, silver filled system features low volume resistivity and high flexibility. Scroll through to learn more!
Electrically Conductive Epoxy Charges Ahead
Nickel filled epoxy system EP21TDCN-LO meets NASA low outgassing specifications and features excellent electrical conductivity. This adhesive and sealant is ideal for use grounding, shielding and static dissipation applications. Scroll through to learn more!
Adhesive Keeps Out UV Light & Lets Light In
Master Bond EP30-2LB epoxy system blocks UV light while allowing the transmission of visible light. This two part, optically clear compound meets NASA low outgassing specifications and features high optical clarity with a refractive index of 1.55.
The Highs & Lows of Thermal Management
One part epoxy, Supreme 18TC, contains a blend of special thermally conductive fillers allowing it to maintain outstanding heat transfer capabilities. This smooth paste system can be applied in bond lines as thin as 10-15 microns. Supreme 18TC features ultra low thermal resistance and meets NASA low outgassing specifications.
In the Clear: Epoxy System EP112LS
Master Bond EP112LS is a two part, optically clear system for impregnation, potting, encapsulation, sealing and coating applications. This compound features reliable non-yellowing properties and a refractive index of 1.55. It is ideal for use in aerospace and optoelectronics industries.
Super Toughened Epoxy Resists High Temperatures & Chemicals
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Newly Developed Products 2017 - Part 1
Browse though Master Bond's product highlights of 2017! These adhesives, sealants, coatings and encapsulation systems feature unique performance properties and many meet stringent industrial specifications.
Newly Developed Products 2017 - Part 2
Check out Master Bond's innovative product developments of 2017! Browse through our highlighted adhesive, sealant, coating and encapsulation compounds from this year.
One Part Epoxy Has Low CTE
Master Bond EP13LTE is a one part epoxy featuring a low coefficient of thermal expansion and high temperature resistance. This system is ideal for structural bonding applications where precise alignment is necessary. The following infographic highlights the exemplary properties of EP13LTE.
Newly Developed Products 2016 - Part 3
This document introduces several newly developed products from 2016, including a supreme-grade epoxy with chemical, abrasion and heat resistance, a nickel-conductive epoxy that meets NASA outgassing specifications, a UV-curable system with abrasion resistance and flexibility, a silver-filled silicone that meets NASA outgassing specifications, and a chemical-resistant epoxy with a high glass transition temperature. Contact information is provided at the end.
More from Master Bond (20)
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Underfill Epoxy Offers Thermal Conductivity & Electrical Insulation
Tough Epoxy Polysulfide System Resists up to 350˚F
Tough Epoxy Polysulfide System Resists up to 350˚F
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
Free Flowing Encapsulant meets NASA Low Outgassing Specifications
It's What's Inside That Counts - Nanosilica Filled Adhesives
It's What's Inside That Counts - Nanosilica Filled Adhesives
One Component, Non-Drip Adhesive for Structural Bonding
One Component, Non-Drip Adhesive for Structural Bonding
Toughened, Two Component, Room Temperature Curing Epoxy
Toughened, Two Component, Room Temperature Curing Epoxy
Super Toughened Epoxy Resists High Temperatures & Chemicals
Super Toughened Epoxy Resists High Temperatures & Chemicals
Recently uploaded
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Finale of the Year: Apply for Next One!
Presentation for the event called "Finale of the Year: Apply for Next One!" organized by GDSC PJATK
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Recently uploaded (20)
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP