10 gpon transceiver 11072017
•
0 likes•54 views
The document discusses two series of ONU transceivers for next generation PON networks: the EOLS-PX-GU-20 series compliant with ITU-T G.987.2 XGPON N2a and the EOLS-PR-GU-20 series compliant with ITU-T G.9801.1 XGS-PON. Both series are single fiber bi-directional transceivers in an SFP+ package with SC receptacle and single +3.3V power supply. The key differences are that the XGPON N2 series provides 2.488Gbps upstream and 9.95Gbps downstream transmission, while the XGS-PON series provides symmetrical
Report
Share
Report
Share
Download to read offline
Recommended
802.11ax ,IPQ 6018
The document describes the DR6018 dual-band 11ax MU-MIMO OFDMA wireless module. It has a quad-core 1.8GHz processor, 1GB RAM, and supports 2.4GHz and 5GHz 802.11ax with up to 573Mbps and 1201Mbps speeds respectively. It is designed for applications like 802.11ax MU-MIMO access points, mesh routers, and smart APs in environments like offices and factories.
Aba4 skx
This document summarizes a 4W Ku-band block up converter (BUC) that is the smallest and lightest on the market. It uses GaN technology and requires less than 19W of power, allowing it to operate without an external power supply. It has an output frequency range of 13.75-14.5 GHz, local oscillator of 12.8 GHz, and IF frequency range of 950-1700 MHz. Key features include low power consumption, small size, wide operating temperature range, and compliance with various industry standards.
St5801 a specification
This document describes the ST5801A, a 30KM outdoor wireless digital bridge that can transmit and receive audio/video signals. It supports data transfer rates from 6-108Mbps and wireless connections between 1 to 16 points. The device is intended for use in expanding networks or providing coverage for businesses, schools, or remote areas. It can operate in temperatures from -30 to 70 degrees Celsius.
Familiar With QSFP-40G-SR4
40GBASE-SR4 ("short range") is a port type for multi-mode fiber and uses 850nm lasers. It's used for short range fiber connection. Its Physical Coding Sublayer 64b/66b PCS is defined in IEEE 802.3 Clause 82 and its Physical Medium Dependent PMD in Clause 86.
ComNet FVT1031M1P Data Sheet
Buy the ComNet FVT1031M1P at JMAC Supply.
http://www.jmac.com/ComNet_FVT1031M1P_p/comnet-fvt1031m1p.htm?=slideshare
ComNet FVT20 Data Sheet
Buy the ComNet FVT20 at JMAC Supply.
http://www.jmac.com/ComNet_FVT20_p/comnet-fvt20.htm?=slideshare
Infinity BS322 Datasheet
The Repeatit Infinity BS322 is a dual-radio, point-to-multipoint base station that supports up to 2 external antennas for short to long distance wireless connections. It has a dual radio design operating in the 5.150-5.845GHz frequency band with a combined throughput of 380Mbps, supports common encryption and authentication protocols, and has an IP67-rated weatherproof casing measuring 284 x 174 x 81mm.
ComNet FVT81M1 Data Sheet
Buy the ComNet FVT81M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT81M1_p/comnet-fvt81m1.htm?=slideshare
Recommended
802.11ax ,IPQ 6018
The document describes the DR6018 dual-band 11ax MU-MIMO OFDMA wireless module. It has a quad-core 1.8GHz processor, 1GB RAM, and supports 2.4GHz and 5GHz 802.11ax with up to 573Mbps and 1201Mbps speeds respectively. It is designed for applications like 802.11ax MU-MIMO access points, mesh routers, and smart APs in environments like offices and factories.
Aba4 skx
This document summarizes a 4W Ku-band block up converter (BUC) that is the smallest and lightest on the market. It uses GaN technology and requires less than 19W of power, allowing it to operate without an external power supply. It has an output frequency range of 13.75-14.5 GHz, local oscillator of 12.8 GHz, and IF frequency range of 950-1700 MHz. Key features include low power consumption, small size, wide operating temperature range, and compliance with various industry standards.
St5801 a specification
This document describes the ST5801A, a 30KM outdoor wireless digital bridge that can transmit and receive audio/video signals. It supports data transfer rates from 6-108Mbps and wireless connections between 1 to 16 points. The device is intended for use in expanding networks or providing coverage for businesses, schools, or remote areas. It can operate in temperatures from -30 to 70 degrees Celsius.
Familiar With QSFP-40G-SR4
40GBASE-SR4 ("short range") is a port type for multi-mode fiber and uses 850nm lasers. It's used for short range fiber connection. Its Physical Coding Sublayer 64b/66b PCS is defined in IEEE 802.3 Clause 82 and its Physical Medium Dependent PMD in Clause 86.
ComNet FVT1031M1P Data Sheet
Buy the ComNet FVT1031M1P at JMAC Supply.
http://www.jmac.com/ComNet_FVT1031M1P_p/comnet-fvt1031m1p.htm?=slideshare
ComNet FVT20 Data Sheet
Buy the ComNet FVT20 at JMAC Supply.
http://www.jmac.com/ComNet_FVT20_p/comnet-fvt20.htm?=slideshare
Infinity BS322 Datasheet
The Repeatit Infinity BS322 is a dual-radio, point-to-multipoint base station that supports up to 2 external antennas for short to long distance wireless connections. It has a dual radio design operating in the 5.150-5.845GHz frequency band with a combined throughput of 380Mbps, supports common encryption and authentication protocols, and has an IP67-rated weatherproof casing measuring 284 x 174 x 81mm.
ComNet FVT81M1 Data Sheet
Buy the ComNet FVT81M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT81M1_p/comnet-fvt81m1.htm?=slideshare
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
ComNet FVT80SFP Data Sheet
Buy the ComNet FVT80SFP at JMAC Supply.
http://www.jmac.com/ComNet_FVT80SFP_p/comnet-fvt80sfp.htm?=slideshare
St543 jz specification-www.ttbvs.com
The ST543JZ is an IEEE 802.11a/n compliant wireless bridge with an integrated 18dBi dual-polarization antenna. It supports data rates up to 300Mbps and has a transmission power up to 26dBm. The weatherproof casing allows for outdoor installation and the passive PoE enables long range transmission over 5GHz wireless links of up to 100 clients.
CR1609L030BN8
This document provides specifications for a rectangular micro-speaker measuring 16x9x3mm. It outlines the speaker's electrical and acoustic specifications including its rated input power, impedance, sound pressure level, resonance frequency, frequency range, and distortion. It also describes the speaker's construction, typical frequency response, environmental test requirements, dimensions, PCB layout, and packing information.
St5817 h specification
The document describes the specifications of the ST5817H wireless access point equipment. It has features such as IEEE 802.11a/n compliance, an Atheros 560MHz networking processor, up to 26dBm output power, up to 300Mbps physical data rates, and an integrated 17dBi dual-polarization antenna. It also provides details on its processor, memory, interfaces, power consumption, operating conditions, dimensions, and wireless transmission power and receiver sensitivity levels.
ComNet FVT1031M1 Data Sheet
Buy the ComNet FVT1031M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT1031M1_p/comnet-fvt1031m1.htm?=slideshare
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...Thorne & Derrick International
Metrohm MET7A501C Safety Insulation Tester
LV HV Electrical Testing
Electrical Safety Testing In Hazardous Areas
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Description
Martindale Electric Metrohm MET7A501C Safety Insulation Tester was originally designed for use in hazardous areas, such as mines and petrol sites. However, due to the new ATEX regulations, the device no longer meets the requirements for intrinsically safe products - BUT this product has been in active service for 45 years in hazardous areas, in the presence of methane, ammonia and hydrocarbons.
The Metrohn MET7A501C is a one of a kind tester and fully meets the ATEX requirements, therefore the use of this tester should be decided upon by a suitably qualified and knowledgeable person. Whilst the MET7A501C safety insuation tester does not qualify for ATEX approval, safety officers should evaluate the risks of failing to perform adequate electrical safety testing.
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Specifications
Insulation Range: 0 - 50MΩ
Test Voltage: 500V DC +/- 10% across 1MΩ
Short Circuit Current: <2ma><26mA
Continuity Accuracy: +/- 1.6mm of scale arc length
Complies With: BS1259
Supply: 1.5V AA IEC batteries
Housing: Shatterproof ABS case
Dimensions: 32 x 82 x 60mm
Weight: 600g approx
Operating Temperature: 0 to 40°C
Storage Temperature: -20°C to 60°C
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Contents
Case, test leads (DFK0113)
Safety tool to remove battery cover
Instruction manualCMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
Datasheet GC
This document provides product specifications for a female F-connector (GC CaP System F FEMALE CONNECTOR) for connecting coaxial cables. The connector is suitable for cables with inner diameters between 0.3-1.1mm, has a 75 ohm impedance rating up to 2GHz, and can withstand 500V and 5000M-ohm insulation resistance. It has a zinc-nickel plated body and bronze-nickel plated shrapnel. Each connector is sold with two CaPs and has an operating temperature range of -40 to 120 degrees Celsius.
ComNet FVT414M1 Data Sheet
This document summarizes the features and specifications of the ComNet FVT/FVR41 4-channel video multiplexer. The multiplexer can simultaneously transmit 4 video channels over a single optical fiber using digital encoding and decoding to provide high quality video transmission. It is designed for use in outdoor environments from -40 to 75 degrees Celsius. Key features include transmission of real-time color video, low video distortion, compatibility with CCTV systems, wide optical range, and 5 year warranty.
L1 L2 GPS GLONASS Active Helix Antenna
The M1227HCT-A-SMA is a compact, high performance GPS/GLONASS antenna designed for precision applications. It features exceptional pattern control, high efficiency, and polarization purity. The antenna provides gains of 2dBic within the L1 and L2 bands, rejects out-of-band interference by more than 50dB, and is rated to withstand 50V/m of interference. It is a screw-on design with an integrated SMA connector and O-ring sealing for waterproofing.
Manual 868 mhz antenna with sma connector enocean - vitec
This document provides specifications for the GC-AP11-868 external antenna for Enocean applications. The antenna operates within frequency bands of 868-902 MHz or optionally 315 MHz, has an SMA male connector, gain of 2 dB, and dimensions of 198mm. It is an omni-directional antenna with a 50 ohm impedance for use between -35 to 75 degrees Celsius.
Coaxial ingaas photodiode module
High responsivity, Low return loss,
Low dark current, Low capacitance,
Planar incident structure,
Coaxial Package, Laser wdlding , High reliability,
Application: Analog optical receiver
Optical Transmitter or date signal
CDMA, CATV
Pinfet
Ideal Photonics offers several high sensitivity PIN-FET receiver modules with bandwidths ranging from 20MHz to 6MHz, sensitivities from -44dBm to -56dBm, and transimpedance gains from 40Kohms to 1400Kohms. The modules operate from -40 to 85 degrees Celsius with low noise and high dynamic range. They are available in 14-pin or 8-pin packages and can be ordered from Ideal Photonics.
Infinity SU116 Datasheet
The Repeatit Trinity SU116 is a small point-to-multipoint subscriber unit optimized for short to medium distance wireless networks. It features a high gain 16dBi antenna, supports modulation up to 64QAM, has a maximum transmit power of 23dBm, and operates in the 5.150-5.845GHz frequency band supporting channel widths from 5 to 40MHz. The SU116 has an IP63-rated enclosure, measures 250 x 210 x 80mm, and weighs 1.1kg.
St6000 ru specification-www.ttbvs.com
The ST6000RU is a COFDM wireless video receiver that provides DVD quality video transmission using MPEG-2 video compression. It uses COFDM modulation for stable transmission in mobile and non-line-of-sight environments with strong 128-bit AES encryption for security. The receiver has a modular compact design and works in multiple frequency bands, making it suitable for wireless video applications in vehicles, ships, helicopters, trains, and tunnels.
ComNet FVT80D8SFP Data Sheet
Buy the ComNet FVT80D8SFP at JMAC Supply.
http://www.jmac.com/ComNet_FVT80D8SFP_p/comnet-fvt80d8sfp.htm?=slideshare
Sfp sfp+ brochure-12222017
This document describes two optical transceiver modules, the EOLS-8512-02-X 1G-BASE SFP+ Transceiver and the EOLP-8596-02-X 10GBASE SFP+ Transceiver. Both modules are designed for multimode fiber communication at 850nm wavelength and comply with laser safety standards. The 10G module can transmit up to 11.3Gbps over 300m of fiber, while the 1G module can transmit up to 1.25Gbps over 550m or 300m of fiber depending on the fiber type. Both modules have a single 3.3V power supply and hot-pluggable duplex LC fiber connectors.
DWDM-SFP10G-40-C18-T02#141064.pdf
This document provides specifications for the DWDM-SFP10G-40-C18-T02 10G 1563.05nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions, and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports real-time monitoring of operating parameters through a digital diagnostic interface.
More Related Content
What's hot
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
ComNet FVT80SFP Data Sheet
Buy the ComNet FVT80SFP at JMAC Supply.
http://www.jmac.com/ComNet_FVT80SFP_p/comnet-fvt80sfp.htm?=slideshare
St543 jz specification-www.ttbvs.com
The ST543JZ is an IEEE 802.11a/n compliant wireless bridge with an integrated 18dBi dual-polarization antenna. It supports data rates up to 300Mbps and has a transmission power up to 26dBm. The weatherproof casing allows for outdoor installation and the passive PoE enables long range transmission over 5GHz wireless links of up to 100 clients.
CR1609L030BN8
This document provides specifications for a rectangular micro-speaker measuring 16x9x3mm. It outlines the speaker's electrical and acoustic specifications including its rated input power, impedance, sound pressure level, resonance frequency, frequency range, and distortion. It also describes the speaker's construction, typical frequency response, environmental test requirements, dimensions, PCB layout, and packing information.
St5817 h specification
The document describes the specifications of the ST5817H wireless access point equipment. It has features such as IEEE 802.11a/n compliance, an Atheros 560MHz networking processor, up to 26dBm output power, up to 300Mbps physical data rates, and an integrated 17dBi dual-polarization antenna. It also provides details on its processor, memory, interfaces, power consumption, operating conditions, dimensions, and wireless transmission power and receiver sensitivity levels.
ComNet FVT1031M1 Data Sheet
Buy the ComNet FVT1031M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT1031M1_p/comnet-fvt1031m1.htm?=slideshare
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...Thorne & Derrick International
Metrohm MET7A501C Safety Insulation Tester
LV HV Electrical Testing
Electrical Safety Testing In Hazardous Areas
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Description
Martindale Electric Metrohm MET7A501C Safety Insulation Tester was originally designed for use in hazardous areas, such as mines and petrol sites. However, due to the new ATEX regulations, the device no longer meets the requirements for intrinsically safe products - BUT this product has been in active service for 45 years in hazardous areas, in the presence of methane, ammonia and hydrocarbons.
The Metrohn MET7A501C is a one of a kind tester and fully meets the ATEX requirements, therefore the use of this tester should be decided upon by a suitably qualified and knowledgeable person. Whilst the MET7A501C safety insuation tester does not qualify for ATEX approval, safety officers should evaluate the risks of failing to perform adequate electrical safety testing.
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Specifications
Insulation Range: 0 - 50MΩ
Test Voltage: 500V DC +/- 10% across 1MΩ
Short Circuit Current: <2ma><26mA
Continuity Accuracy: +/- 1.6mm of scale arc length
Complies With: BS1259
Supply: 1.5V AA IEC batteries
Housing: Shatterproof ABS case
Dimensions: 32 x 82 x 60mm
Weight: 600g approx
Operating Temperature: 0 to 40°C
Storage Temperature: -20°C to 60°C
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Contents
Case, test leads (DFK0113)
Safety tool to remove battery cover
Instruction manualCMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
Datasheet GC
This document provides product specifications for a female F-connector (GC CaP System F FEMALE CONNECTOR) for connecting coaxial cables. The connector is suitable for cables with inner diameters between 0.3-1.1mm, has a 75 ohm impedance rating up to 2GHz, and can withstand 500V and 5000M-ohm insulation resistance. It has a zinc-nickel plated body and bronze-nickel plated shrapnel. Each connector is sold with two CaPs and has an operating temperature range of -40 to 120 degrees Celsius.
ComNet FVT414M1 Data Sheet
This document summarizes the features and specifications of the ComNet FVT/FVR41 4-channel video multiplexer. The multiplexer can simultaneously transmit 4 video channels over a single optical fiber using digital encoding and decoding to provide high quality video transmission. It is designed for use in outdoor environments from -40 to 75 degrees Celsius. Key features include transmission of real-time color video, low video distortion, compatibility with CCTV systems, wide optical range, and 5 year warranty.
L1 L2 GPS GLONASS Active Helix Antenna
The M1227HCT-A-SMA is a compact, high performance GPS/GLONASS antenna designed for precision applications. It features exceptional pattern control, high efficiency, and polarization purity. The antenna provides gains of 2dBic within the L1 and L2 bands, rejects out-of-band interference by more than 50dB, and is rated to withstand 50V/m of interference. It is a screw-on design with an integrated SMA connector and O-ring sealing for waterproofing.
Manual 868 mhz antenna with sma connector enocean - vitec
This document provides specifications for the GC-AP11-868 external antenna for Enocean applications. The antenna operates within frequency bands of 868-902 MHz or optionally 315 MHz, has an SMA male connector, gain of 2 dB, and dimensions of 198mm. It is an omni-directional antenna with a 50 ohm impedance for use between -35 to 75 degrees Celsius.
Coaxial ingaas photodiode module
High responsivity, Low return loss,
Low dark current, Low capacitance,
Planar incident structure,
Coaxial Package, Laser wdlding , High reliability,
Application: Analog optical receiver
Optical Transmitter or date signal
CDMA, CATV
Pinfet
Ideal Photonics offers several high sensitivity PIN-FET receiver modules with bandwidths ranging from 20MHz to 6MHz, sensitivities from -44dBm to -56dBm, and transimpedance gains from 40Kohms to 1400Kohms. The modules operate from -40 to 85 degrees Celsius with low noise and high dynamic range. They are available in 14-pin or 8-pin packages and can be ordered from Ideal Photonics.
Infinity SU116 Datasheet
The Repeatit Trinity SU116 is a small point-to-multipoint subscriber unit optimized for short to medium distance wireless networks. It features a high gain 16dBi antenna, supports modulation up to 64QAM, has a maximum transmit power of 23dBm, and operates in the 5.150-5.845GHz frequency band supporting channel widths from 5 to 40MHz. The SU116 has an IP63-rated enclosure, measures 250 x 210 x 80mm, and weighs 1.1kg.
St6000 ru specification-www.ttbvs.com
The ST6000RU is a COFDM wireless video receiver that provides DVD quality video transmission using MPEG-2 video compression. It uses COFDM modulation for stable transmission in mobile and non-line-of-sight environments with strong 128-bit AES encryption for security. The receiver has a modular compact design and works in multiple frequency bands, making it suitable for wireless video applications in vehicles, ships, helicopters, trains, and tunnels.
ComNet FVT80D8SFP Data Sheet
Buy the ComNet FVT80D8SFP at JMAC Supply.
http://www.jmac.com/ComNet_FVT80D8SFP_p/comnet-fvt80d8sfp.htm?=slideshare
What's hot (20)
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Cell Modules and 60 cell modules (multi-crystalline)
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...
Manual 868 mhz antenna with sma connector enocean - vitec
Manual 868 mhz antenna with sma connector enocean - vitec
Similar to 10 gpon transceiver 11072017
Sfp sfp+ brochure-12222017
This document describes two optical transceiver modules, the EOLS-8512-02-X 1G-BASE SFP+ Transceiver and the EOLP-8596-02-X 10GBASE SFP+ Transceiver. Both modules are designed for multimode fiber communication at 850nm wavelength and comply with laser safety standards. The 10G module can transmit up to 11.3Gbps over 300m of fiber, while the 1G module can transmit up to 1.25Gbps over 550m or 300m of fiber depending on the fiber type. Both modules have a single 3.3V power supply and hot-pluggable duplex LC fiber connectors.
DWDM-SFP10G-40-C18-T02#141064.pdf
This document provides specifications for the DWDM-SFP10G-40-C18-T02 10G 1563.05nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions, and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports real-time monitoring of operating parameters through a digital diagnostic interface.
DWDM-SFP10G-40-C61-T02#141107.pdf
This document provides specifications for the DWDM-SFP10G-40-C61-T02 10G 1528.77nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for real-time monitoring.
DWDM-SFP10G-40-C48-T02#141094.pdf
This document provides specifications for the DWDM-SFP10G-40-C48-T02 10G 1538.98nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions, and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for real-time monitoring.
DWDM-SFP10G-40-C60-T02#141106.pdf
This document provides specifications for the DWDM-SFP10G-40-C60-T02 10G 1529.55nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for monitoring parameters such as temperature, optical power levels and voltage.
DWDM-SFP10G-40-C47-T02#141093.pdf
This document provides specifications for a 10G 1539.77nm 40km DWDM SFP+ transceiver. It includes:
- Product description outlining key features such as operating at 10G bit rates up to 40km, low power consumption, and digital diagnostic monitoring interface.
- Optical and electrical characteristics including center wavelength, output power, sensitivity, and data rates.
- Pin descriptions and definitions.
- Recommended power supply filtering and package dimensions.
DWDM-SFP10G-40-C42-T02#141088.pdf
This document provides specifications for the DWDM-SFP10G-40-C42-T02 10G 1543.73nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, recommended power supply filter, package dimensions and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports bit rates of 9.95 to 11.3 Gb/s with low power consumption of less than 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for monitoring parameters such as temperature
DWDM-SFP10G-40-C22-T02#141068.pdf
This document provides specifications for a 10G 1559.79nm 40km DWDM SFP+ transceiver. It includes details on the product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, and package dimensions. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions for real-time monitoring via a 2-wire interface.
DWDM-SFP10G-40-C26-T02#141072.pdf
This document provides specifications for a 10G 1556.55nm 40km DWDM SFP+ transceiver. It includes details on the product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, packaging dimensions, and ordering information. The transceiver is designed for 10GbE links up to 40km over single-mode fiber and supports hot-pluggable SFP+ form factor with a cooled laser transmitter and PIN receiver, low power consumption, and digital diagnostics monitoring via an interface.
DWDM-SFP10G-40-C17-T02#141063.pdf
This document provides specifications for a 10G 1563.86nm 40km DWDM SFP+ transceiver. It includes:
- Product description of a pluggable SFP+ transceiver designed for 10GbE links up to 40km over single-mode fiber.
- Electrical and optical characteristics including center wavelength, power levels, and temperature ranges.
- Pinout diagram and descriptions of the transceiver connections and digital diagnostic monitoring interface.
- Dimensional drawings and ordering information for the DWDM SFP+ module.
DWDM-SFP10G-40-C32-T02#141078.pdf
This document provides specifications for a 10G 1551.72nm 40km DWDM SFP+ transceiver. It includes details on the product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, packaging dimensions, and ordering information. The transceiver is designed for 10GbE links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3Gbps with low power consumption under 1.2W. It provides digital diagnostics monitoring of parameters like temperature, voltage, transmit power and receive power.
dwdm-sfp10g-40km-c32-fiber-transceiver-module-data-sheet-141078.pdf
This document provides specifications for a 10G 1551.72nm 40km DWDM SFP+ transceiver. It includes details on the product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, packaging dimensions, and ordering information. The transceiver is designed for 10GbE links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3Gbps with low power consumption under 1.2W. It provides digital diagnostics monitoring of parameters such as temperature, voltage, transmit power and receive power.
DWDM-SFP10G-40-C43-T02#141089.pdf
This document provides specifications for the DWDM-SFP10G-40-C43-T02 10G 1542.94nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions, and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for real-time monitoring.
DWDM-SFP10G-40-C40-T02#141086.pdf
This document provides specifications for the DWDM-SFP10G-40-C40-T02 10G 1545.32nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for real-time monitoring.
dwdm-sfp10g-40km-c40-optic-transceiver-module-data-sheet-141086.pdf
This document provides specifications for the DWDM-SFP10G-40-C40-T02 10G 1545.32nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for real-time monitoring.
DWDM-SFP10G-40-C41-T02#141087.pdf
This document provides specifications for the DWDM-SFP10G-40-C41-T02 10G 1544.53nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for real-time monitoring.
DWDM-SFP10G-40-C19-T02#141065.pdf
This document provides specifications for the DWDM-SFP10G-40-C19-T02 10G 1562.23nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, and package dimensions. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports real-time monitoring of parameters like temperature, power levels and bias current through its digital diagnostic interface.
DWDM-SFP10G-40-C46-T02#141092.pdf
This document provides specifications for the DWDM-SFP10G-40-C46-T02 10G 1540.56nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, package dimensions and ordering information. The transceiver is designed for 10GbE links up to 40km over single-mode fiber and supports DWDM with a 100GHz channel spacing. It provides digital diagnostics for monitoring parameters like temperature, voltage, transmit power and receive power.
DWDM-SFP10G-40-C49-T02#141095.pdf
This document provides specifications for a 10G 1538.18nm 40km DWDM SFP+ transceiver. It includes details on the product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, packaging dimensions, and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports a data rate of 9.95-11.3 Gbps with low power consumption under 1.2W. It provides digital diagnostics monitoring of internal temperatures, voltages, transmit power and receive power via a 2-wire serial interface.
DWDM-SFP10G-40-C56-T02#141102.pdf
This document provides specifications for the DWDM-SFP10G-40-C56-T02 10G 1532.68nm 40km DWDM SFP+ transceiver. It includes details on its product description, features, functional diagram, optical and electrical characteristics, pin definitions, digital diagnostic monitoring interface, and ordering information. The transceiver is designed for 10 Gigabit Ethernet links up to 40km over single-mode fiber and supports bit rates of 9.95 to 11.3 Gb/s with low power consumption of less than 1.2W. It provides digital diagnostics functions via a 2-wire serial interface for monitoring parameters such as temperature, bias current, optical power levels
Similar to 10 gpon transceiver 11072017 (20)
dwdm-sfp10g-40km-c32-fiber-transceiver-module-data-sheet-141078.pdf
dwdm-sfp10g-40km-c32-fiber-transceiver-module-data-sheet-141078.pdf
dwdm-sfp10g-40km-c40-optic-transceiver-module-data-sheet-141086.pdf
dwdm-sfp10g-40km-c40-optic-transceiver-module-data-sheet-141086.pdf
More from MITS Component & System Corp.
400G/800G High Speed Networking product guide
We are offering a comprehensive high speed networking solution which is including 3.2T Co-packaged Optic (CPO), 100G, 200G, 400G & 800G transceivers, DACs, AOCs, ACCs & Loopback modules. We are fulfil your research (R&D) stage product development, DVT/EVT pre-product testing, mass production and also for final application use.
Welcome to contact us for more product info.
Mits 5G brief solution 2021
There are several categories info that is what MITS current carrying in 5G application. You are welcome to contact us for more info.
1. more options for 1588 GM/Sync-E to support LLS-C1/C2/C3
2. FPGA SoC, SmartNIC for 5G RU/DU/CU applications
3. Optics for 5G fronthaul -- 10G/25G
4. High Power PoE 802.3bt (upto 90W/PSE & 71W/PD)
5. Signal Integrity tools -- De-embedded SW + True Odd Probe (upto 70Ghz)
RF Components 2021
We offer a wider range of the Complete RF parts, like Cables (matched, flexible), Adaptors, Terminations, DC Block, Attenuators, End Lunch Connectors to meet your high speed wired/wireless applications.
Qaulityline's success story with Gilat Satellite Networks
How QualityLine's Manufacturing Analytics Solution to solve the manufacturing problems that Gilat Satellite Networks worldwide.
Ultra high power ieee802.3bt PoE PD/PSE, Injectors/Splitters
Complete Ultra High Power PoE solution which complains with IEEE802.3bt standard. and max. power for PSE is 95W and 71W for PD. We offer PD/PSE modules, Injectors and Splitters to fit the type 3 & 4
400G High Speed interconnect product guide
The document provides information about 400G and 100G optical transceivers and components from MITS Component & System Corp. It includes specifications for various QSFP-DD, QSFP56, and QSFP28 transceivers and direct attach cables that support data rates up to 400Gbps. It also lists MPO and fiber optic patch cords, loopback modules, and other optical connectivity products.
400G QSFP-DD AOC
This document provides information about the AOC-400G-QDD/QDD-1-xx 400GBASE-SR8 QSFP-DD Active Optical Cable from MITS Component & System Corp. It supports up to 425Gb/s transmission over 8 channels of 50Gb/s PAM4 VCSEL/PIN connections and complies with various QSFP-DD and Ethernet standards with low power dissipation of around 7W per end.
DAC, AOC & MPO/LC cable solution
The document discusses various digital optical cables and active optical cables produced by MITS Component & System Corp. It provides details on DAC cables for 10G, 25G, 40G, and 100G Ethernet and fiber channel applications. It also discusses mini-SAS HD and OCuLink cables for server and storage solutions. Additionally, it provides information on 100G, 40G, and 25G active optical cables. Ordering information and specifications are provided for each cable type.
Qsfp28 brochure 12222017
An electronics company introduces their 100G QSFP28 series transceivers that support transmission speeds up to 103.1Gbps and include SR4, CWDM4, CLR4, LR4, ELR4, ER4 Lite and ER4 modules. The transceivers can transmit up to 100m on multi-mode fiber and 10km/2km on single-mode fiber. They have features such as low power dissipation, hot-pluggable QSFP footprint, laser safety compliance, and I2C interface for digital diagnostics monitoring. The 100G QSFP28 transceivers are suited for applications including high-speed interconnects within switches and routers, server-server clusters, and 100GBASE
Gpon stick transceiver 11072017
The document describes a GPON stick called the EOLS-GN-25-DX that allows networking devices to be enabled for GPON connectivity. It is a GPON optical network terminal with SFP packaging that integrates GPON and Ethernet MACs. This allows the SFP ONT to plug into any SFP host and operate as a single demarcation device on the customer premise to provide GPON connectivity.
10 g sfp+ copper transceiver 11072017a
The document describes a 10GBASE-T copper SFP+ transceiver module from Mitsco Component that provides 10 gigabit Ethernet connectivity over Cat6a/7 copper cable up to 30 meters. The module supports 10GBASE-T, 1000BASE-T, and 100BASE-TX standards and features low power consumption, hot-pluggable SFP form factor, and an extended operating temperature range. Benefits of the 10GBASE-T SFP+ module include a reach of up to 30 meters over copper cable, reliability of the RJ45 connector interface, ability to upgrade connections with copper instead of fiber optic, and compliance with relevant IEEE standards.
Mpo brochure 150324a
The document discusses MITS Component & System Corp.'s solutions for data center cabling, including plug-and-play pre-terminated trunk cables using MPO connectors, MPO breakout cables, MPO cassette modules for interfacing trunk cables to LC jumpers, and LC duplex uniboot optical harness cables for high-density connections with minimized space. The solutions aim to reduce installation time and costs while enabling migration to higher speeds up to 100Gb and beyond through flexible, expandable cabling systems.
More from MITS Component & System Corp. (14)
Qaulityline's success story with Gilat Satellite Networks
Qaulityline's success story with Gilat Satellite Networks
Ultra high power ieee802.3bt PoE PD/PSE, Injectors/Splitters
Ultra high power ieee802.3bt PoE PD/PSE, Injectors/Splitters
Recently uploaded
Company Profile of Tempcon - Chiller Manufacturer In India
This is the company profile of Tempcon - chiller manufacturer in India. Tempcon manufactures water cooled and air cooled chillers and industrial AC. The company has been in the business since 1983.
website: https://www.tempcon.co.in/
一比一原版(SBU毕业证书)肯特州立大学毕业证如何办理
原版办理【微信号:BYZS866】【(SBU毕业证书)肯特州立大学毕业证】【微信号:BYZS866】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【关于学历材料质量】
我们承诺采用的是学校原版纸张（原版纸质、底色、纹路）我们工厂拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有成品以及工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版西三一大学毕业证(TWU毕业证书)学历如何办理
加急办理【微信号:176555708】【加急办理(TWU毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(aiti毕业证书)澳洲悉尼翻译学院毕业证如何办理
原版一模一样【微信：741003700 】【(aiti毕业证书)澳洲悉尼翻译学院毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版不列颠哥伦比亚大学毕业证(UBC毕业证书)学历如何办理
快速办理【微信号:176555708】【快速办理(UBC毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
买(usyd毕业证书)澳洲悉尼大学毕业证研究生文凭证书原版一模一样
原版定制【微信:bwp0011】《(usyd毕业证书)澳洲悉尼大学毕业证研究生文凭证书》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"
In iOS 18, Apple has introduced a significant revamp to the Control Centre, making it more intuitive and user-friendly. One of the standout features is a quicker and more accessible way to shut down your iPhone. This enhancement aims to streamline the user experience, allowing for faster access to essential functions. Discover how iOS 18's redesigned Control Centre can simplify your daily interactions with your iPhone, bringing convenience right at your fingertips.
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
欧洲杯投注-欧洲杯投注押注app-欧洲杯投注押注app官网|【网址🎉ac10.net🎉】
【网址🎉ac10.net🎉】欧洲杯投注在多数英超比赛球场都设有投注点，其业务现已扩展到西班牙。欧洲杯投注支持19种语言和货币。更为重要的是，欧洲杯投注使用市场上最为先进的安全系统，为用户提供全年365天，每天24小时的专业服务。
The Future of Wearable Technology in Healthcare: Innovations and Trends to Watch
As wearable technology continues to shape multiple facets of our lives, its potential in healthcare is becoming increasingly apparent. With the rapid advancement of technology, the integration of wearables into healthcare systems worldwide is accelerating. In this evolving field, we delve into the latest innovations and trends that are transforming healthcare.
世预赛投注-世预赛投注投注官网app-世预赛投注官网app下载|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】世预赛投注是世界上最大的网上博彩公司之一，于直布罗陀注册，在200个国家拥有超过3500万客户。在国际上都可以称得上是极其优秀的博彩公司。总部位于英国Stoke-on-Trent，世预赛投注在世界各地的雇员超过600名。该公司登录亚洲市场多年，近年针对亚洲的市场拓展的很快。它的特点是投注赔率富于变化，同时对于冷门赛事，赔率变化幅度会大于其它博彩公司。世预赛投注在终赔阶段往往向立博、韦德等靠拢，一旦差异很大，往往会出现问题。
欧洲杯体彩-欧洲杯体彩比赛投注-欧洲杯体彩比赛投注官网|【网址🎉ac99.net🎉】
【网址🎉ac99.net🎉】欧洲杯体彩是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯体彩。欧洲杯体彩现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
按照学校原版(UPenn文凭证书)宾夕法尼亚大学毕业证快速办理
办理【(UPenn毕业证书)宾夕法尼亚大学毕业证】【176555708微信号】存档可查的成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版办理（Caltech毕业证)加州理工学院毕业证
一比一原版出售【微信：176555708】【《加州理工学院毕业证》(Caltech学位证成绩单)】【微信：176555708】(留信学历认证永久存档查询)采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：176555708】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版圣托马斯大学毕业证(UST毕业证书)学历如何办理
精仿办理【微信号:176555708】【精仿办理(UST毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯赌钱-欧洲杯赌钱冠军-欧洲杯赌钱冠军赔率|【网址🎉ac10.net🎉】
【网址🎉ac10.net🎉】欧洲杯赌钱是世界上最大的网上博彩公司之一，于直布罗陀注册，在200个国家拥有超过3500万客户。在国际上都可以称得上是极其优秀的博彩公司。总部位于英国Stoke-on-Trent，欧洲杯赌钱在世界各地的雇员超过600名。该公司登录亚洲市场多年，近年针对亚洲的市场拓展的很快。它的特点是投注赔率富于变化，同时对于冷门赛事，赔率变化幅度会大于其它博彩公司。欧洲杯赌钱在终赔阶段往往向立博、韦德等靠拢，一旦差异很大，往往会出现问题。
We’re Underestimating the Damage Extreme Weather Does to Rooftop Solar Panels
Grid Freedom is the best solar leads company based in New Jersey that provides Exclusive solar appointments of qualified solar appointments for guaranteed solar appointments for the best way to get solar leads throughout the nation. Grid Freedom is a solar lead provider, that connects exclusive pre-set appointments with pre-screened homeowners who are ready for solar company leads. The solar lead generators company was founded to provide solar appointment leads contractors with better solar sales leads-buying high-quality exclusive solar leads experience that gives pre-set solar appointments great ROI.
Recently uploaded (17)
Company Profile of Tempcon - Chiller Manufacturer In India
Company Profile of Tempcon - Chiller Manufacturer In India
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
The Future of Wearable Technology in Healthcare: Innovations and Trends to Watch
The Future of Wearable Technology in Healthcare: Innovations and Trends to Watch
世预赛投注-世预赛投注投注官网app-世预赛投注官网app下载|【网址🎉ac123.net🎉】
世预赛投注-世预赛投注投注官网app-世预赛投注官网app下载|【网址🎉ac123.net🎉】
We’re Underestimating the Damage Extreme Weather Does to Rooftop Solar Panels
We’re Underestimating the Damage Extreme Weather Does to Rooftop Solar Panels
10 gpon transceiver 11072017
- 1. What is the Next in xPON ONU Transceivers? XG-PON N2 & XGS-PON 旭捷電子股份有限公司 Tel : 02-66215899 e-mail: optics@mitscomponent.com EOLS-PX-GU-20 Series Compliant with ITU-TG.987.2 XGPON N2a class Single fiber bi-directional Transceiver 2.48832Gbps/US and 9.95328Gbps/DS Features : • SFP+ Package with SC Receptacle • Single +3.3V Power Supply • 2.48832 Gbps / 1270 nm Burst- Mode Transmitter with DFB laser • 9.95328Gbps / 1577nm High Sensitivity Continuous-Mode APD- TIA Receiver • LVTTL Tx_Burst, Tx_SD, LOS • LVTTL Sleep Mode for Power Consumption • Operating Case Temperature - Standard: 0℃~+70℃ - Industrial: -40℃~+85℃ • Compliant with Class 1 FDA and IEC60825-1 laser safety • Compliant with SFF-8472 MSA • Compliant with SFF-8432 MSA EOLS-PR-GU-20 Series Compliant with ITU-T G.9801.1 XGS-PON Single fiber bi-directional Transceiver 9.95328Gbps/US and 9.95328Gbps/DS Features : • SFP+ Package with SC Receptacle • Single +3.3V Power Supply • 9.95328Gbps / 1270 nm Burst- Mode Transmitter with DFB laser • 9.95328Gbps / 1577nm High Sensitivity Continuous-Mode APD- TIA Receiver • LVTTL Tx_Burst, Tx_SD, LOS • LVTTL Sleep Mode for Power Consumption • Operating Case Temperature - Standard: 0℃~+70℃ - Industrial: -40℃~+85℃ • Compliant with Class 1 FDA and IEC60825-1 laser safety • Compliant with SFF-8472 MSA • Compliant with SFF-8432 MSA