We are offering a comprehensive high speed networking solution which is including 3.2T Co-packaged Optic (CPO), 100G, 200G, 400G & 800G transceivers, DACs, AOCs, ACCs & Loopback modules. We are fulfil your research (R&D) stage product development, DVT/EVT pre-product testing, mass production and also for final application use.
Welcome to contact us for more product info.
There are several categories info that is what MITS current carrying in 5G application. You are welcome to contact us for more info.
1. more options for 1588 GM/Sync-E to support LLS-C1/C2/C3
2. FPGA SoC, SmartNIC for 5G RU/DU/CU applications
3. Optics for 5G fronthaul -- 10G/25G
4. High Power PoE 802.3bt (upto 90W/PSE & 71W/PD)
5. Signal Integrity tools -- De-embedded SW + True Odd Probe (upto 70Ghz)
We offer a wider range of the Complete RF parts, like Cables (matched, flexible), Adaptors, Terminations, DC Block, Attenuators, End Lunch Connectors to meet your high speed wired/wireless applications.
Complete Ultra High Power PoE solution which complains with IEEE802.3bt standard. and max. power for PSE is 95W and 71W for PD. We offer PD/PSE modules, Injectors and Splitters to fit the type 3 & 4
We are offering a comprehensive high speed networking solution which is including 3.2T Co-packaged Optic (CPO), 100G, 200G, 400G & 800G transceivers, DACs, AOCs, ACCs & Loopback modules. We are fulfil your research (R&D) stage product development, DVT/EVT pre-product testing, mass production and also for final application use.
Welcome to contact us for more product info.
There are several categories info that is what MITS current carrying in 5G application. You are welcome to contact us for more info.
1. more options for 1588 GM/Sync-E to support LLS-C1/C2/C3
2. FPGA SoC, SmartNIC for 5G RU/DU/CU applications
3. Optics for 5G fronthaul -- 10G/25G
4. High Power PoE 802.3bt (upto 90W/PSE & 71W/PD)
5. Signal Integrity tools -- De-embedded SW + True Odd Probe (upto 70Ghz)
We offer a wider range of the Complete RF parts, like Cables (matched, flexible), Adaptors, Terminations, DC Block, Attenuators, End Lunch Connectors to meet your high speed wired/wireless applications.
Complete Ultra High Power PoE solution which complains with IEEE802.3bt standard. and max. power for PSE is 95W and 71W for PD. We offer PD/PSE modules, Injectors and Splitters to fit the type 3 & 4
The document provides information about 400G and 100G optical transceivers and components from MITS Component & System Corp. It includes specifications for various QSFP-DD, QSFP56, and QSFP28 transceivers and direct attach cables that support data rates up to 400Gbps. It also lists MPO and fiber optic patch cords, loopback modules, and other optical connectivity products.
This document provides information about the AOC-400G-QDD/QDD-1-xx 400GBASE-SR8 QSFP-DD Active Optical Cable from MITS Component & System Corp. It supports up to 425Gb/s transmission over 8 channels of 50Gb/s PAM4 VCSEL/PIN connections and complies with various QSFP-DD and Ethernet standards with low power dissipation of around 7W per end.
The document discusses various digital optical cables and active optical cables produced by MITS Component & System Corp. It provides details on DAC cables for 10G, 25G, 40G, and 100G Ethernet and fiber channel applications. It also discusses mini-SAS HD and OCuLink cables for server and storage solutions. Additionally, it provides information on 100G, 40G, and 25G active optical cables. Ordering information and specifications are provided for each cable type.
This document describes two optical transceiver modules, the EOLS-8512-02-X 1G-BASE SFP+ Transceiver and the EOLP-8596-02-X 10GBASE SFP+ Transceiver. Both modules are designed for multimode fiber communication at 850nm wavelength and comply with laser safety standards. The 10G module can transmit up to 11.3Gbps over 300m of fiber, while the 1G module can transmit up to 1.25Gbps over 550m or 300m of fiber depending on the fiber type. Both modules have a single 3.3V power supply and hot-pluggable duplex LC fiber connectors.
An electronics company introduces their 100G QSFP28 series transceivers that support transmission speeds up to 103.1Gbps and include SR4, CWDM4, CLR4, LR4, ELR4, ER4 Lite and ER4 modules. The transceivers can transmit up to 100m on multi-mode fiber and 10km/2km on single-mode fiber. They have features such as low power dissipation, hot-pluggable QSFP footprint, laser safety compliance, and I2C interface for digital diagnostics monitoring. The 100G QSFP28 transceivers are suited for applications including high-speed interconnects within switches and routers, server-server clusters, and 100GBASE
The document describes a GPON stick called the EOLS-GN-25-DX that allows networking devices to be enabled for GPON connectivity. It is a GPON optical network terminal with SFP packaging that integrates GPON and Ethernet MACs. This allows the SFP ONT to plug into any SFP host and operate as a single demarcation device on the customer premise to provide GPON connectivity.
The document discusses two series of ONU transceivers for next generation PON networks: the EOLS-PX-GU-20 series compliant with ITU-T G.987.2 XGPON N2a and the EOLS-PR-GU-20 series compliant with ITU-T G.9801.1 XGS-PON. Both series are single fiber bi-directional transceivers in an SFP+ package with SC receptacle and single +3.3V power supply. The key differences are that the XGPON N2 series provides 2.488Gbps upstream and 9.95Gbps downstream transmission, while the XGS-PON series provides symmetrical
The document describes a 10GBASE-T copper SFP+ transceiver module from Mitsco Component that provides 10 gigabit Ethernet connectivity over Cat6a/7 copper cable up to 30 meters. The module supports 10GBASE-T, 1000BASE-T, and 100BASE-TX standards and features low power consumption, hot-pluggable SFP form factor, and an extended operating temperature range. Benefits of the 10GBASE-T SFP+ module include a reach of up to 30 meters over copper cable, reliability of the RJ45 connector interface, ability to upgrade connections with copper instead of fiber optic, and compliance with relevant IEEE standards.
The document discusses MITS Component & System Corp.'s solutions for data center cabling, including plug-and-play pre-terminated trunk cables using MPO connectors, MPO breakout cables, MPO cassette modules for interfacing trunk cables to LC jumpers, and LC duplex uniboot optical harness cables for high-density connections with minimized space. The solutions aim to reduce installation time and costs while enabling migration to higher speeds up to 100Gb and beyond through flexible, expandable cabling systems.
The document provides information about 400G and 100G optical transceivers and components from MITS Component & System Corp. It includes specifications for various QSFP-DD, QSFP56, and QSFP28 transceivers and direct attach cables that support data rates up to 400Gbps. It also lists MPO and fiber optic patch cords, loopback modules, and other optical connectivity products.
This document provides information about the AOC-400G-QDD/QDD-1-xx 400GBASE-SR8 QSFP-DD Active Optical Cable from MITS Component & System Corp. It supports up to 425Gb/s transmission over 8 channels of 50Gb/s PAM4 VCSEL/PIN connections and complies with various QSFP-DD and Ethernet standards with low power dissipation of around 7W per end.
The document discusses various digital optical cables and active optical cables produced by MITS Component & System Corp. It provides details on DAC cables for 10G, 25G, 40G, and 100G Ethernet and fiber channel applications. It also discusses mini-SAS HD and OCuLink cables for server and storage solutions. Additionally, it provides information on 100G, 40G, and 25G active optical cables. Ordering information and specifications are provided for each cable type.
This document describes two optical transceiver modules, the EOLS-8512-02-X 1G-BASE SFP+ Transceiver and the EOLP-8596-02-X 10GBASE SFP+ Transceiver. Both modules are designed for multimode fiber communication at 850nm wavelength and comply with laser safety standards. The 10G module can transmit up to 11.3Gbps over 300m of fiber, while the 1G module can transmit up to 1.25Gbps over 550m or 300m of fiber depending on the fiber type. Both modules have a single 3.3V power supply and hot-pluggable duplex LC fiber connectors.
An electronics company introduces their 100G QSFP28 series transceivers that support transmission speeds up to 103.1Gbps and include SR4, CWDM4, CLR4, LR4, ELR4, ER4 Lite and ER4 modules. The transceivers can transmit up to 100m on multi-mode fiber and 10km/2km on single-mode fiber. They have features such as low power dissipation, hot-pluggable QSFP footprint, laser safety compliance, and I2C interface for digital diagnostics monitoring. The 100G QSFP28 transceivers are suited for applications including high-speed interconnects within switches and routers, server-server clusters, and 100GBASE
The document describes a GPON stick called the EOLS-GN-25-DX that allows networking devices to be enabled for GPON connectivity. It is a GPON optical network terminal with SFP packaging that integrates GPON and Ethernet MACs. This allows the SFP ONT to plug into any SFP host and operate as a single demarcation device on the customer premise to provide GPON connectivity.
The document discusses two series of ONU transceivers for next generation PON networks: the EOLS-PX-GU-20 series compliant with ITU-T G.987.2 XGPON N2a and the EOLS-PR-GU-20 series compliant with ITU-T G.9801.1 XGS-PON. Both series are single fiber bi-directional transceivers in an SFP+ package with SC receptacle and single +3.3V power supply. The key differences are that the XGPON N2 series provides 2.488Gbps upstream and 9.95Gbps downstream transmission, while the XGS-PON series provides symmetrical
The document describes a 10GBASE-T copper SFP+ transceiver module from Mitsco Component that provides 10 gigabit Ethernet connectivity over Cat6a/7 copper cable up to 30 meters. The module supports 10GBASE-T, 1000BASE-T, and 100BASE-TX standards and features low power consumption, hot-pluggable SFP form factor, and an extended operating temperature range. Benefits of the 10GBASE-T SFP+ module include a reach of up to 30 meters over copper cable, reliability of the RJ45 connector interface, ability to upgrade connections with copper instead of fiber optic, and compliance with relevant IEEE standards.
The document discusses MITS Component & System Corp.'s solutions for data center cabling, including plug-and-play pre-terminated trunk cables using MPO connectors, MPO breakout cables, MPO cassette modules for interfacing trunk cables to LC jumpers, and LC duplex uniboot optical harness cables for high-density connections with minimized space. The solutions aim to reduce installation time and costs while enabling migration to higher speeds up to 100Gb and beyond through flexible, expandable cabling systems.
6. https://quality-line.org/
“Very efficient solution, enabling us to have a big
picture on a daily basis and excellent root cause
analysis of yield problems.”
“非常高效的解決方案,每天為我們提供
生產的全貌,同時針對良率提供了專業
的根本原因分析。 ”
https://quality-line.org/
7. https://quality-line.org/
重大改進
ROI in 4 months
不到 4 個月的投資回報 (ROI)
30 to 85% yield increase
按照不同的產品,有著
30% 到 85% 的良率提升。
12% production capacity
increase
使用後第一年生產能力提高
了12%。
23% growth in satisfaction
減少了 23% 的客訴 – 更少的
RMA 退貨
https://quality-line.org/