Datasheet GC
•
0 likes•210 views
This document provides product specifications for a female F-connector (GC CaP System F FEMALE CONNECTOR) for connecting coaxial cables. The connector is suitable for cables with inner diameters between 0.3-1.1mm, has a 75 ohm impedance rating up to 2GHz, and can withstand 500V and 5000M-ohm insulation resistance. It has a zinc-nickel plated body and bronze-nickel plated shrapnel. Each connector is sold with two CaPs and has an operating temperature range of -40 to 120 degrees Celsius.
Report
Share
Report
Share
Download to read offline
Recommended
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
Datasheet KBM HQ
This document provides specifications for the KBM-HQ CaP System BNC Male Connector. It has a return loss greater than 30 dB up to 3 GHz, making it a high quality connector suitable for cables from 0.3 to 1.1 mm in diameter, such as RG6, RG59, and RG178. The connector has mechanical parts made from materials like brass, beryllium copper, HDPE, zinc, and rubber. It can operate in temperatures ranging from -40 to 120 degrees Celsius.
Abtech APC Photocell - Spec Sheet
The APC photocell is a device that can automatically control lighting in hazardous areas without requiring extensive rewiring. It uses proven circuitry in an enclosure that provides ingress and UV protection. The photocell can switch lights off when a certain light level is reached, helping to reduce energy costs. It is rated for use in Zone 1 hazardous areas and has IP66/67 ingress protection.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
Datasheet CaP
This document provides product specifications for a CaP F MALE CONNECTOR. The connector is suitable for cables with inner conductors from 0.3 to 1.1 mm, has impedances of 50-75-92 ohms, and operates at frequencies up to 3 GHz. It has screening attenuation greater than -80 dB and return loss greater than -24 dB at 3 GHz. The connector body is made from a protected plastic compound that has a tensile strength of 17 MPa and is halogen free and UV protected.
chenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outd...
chenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outdoor Use (12V 400W)
Description: IP63 AC 170V-264V To DC 12v/24V 400W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 24V 400W Shell Material: Aluminum
Protection: Shortcircuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
This product is a type of Symmetry Resistors, which is a type of Wire Wound Resistors. Features of this product are: Wire wound symmetry resistors, UL approved flame retardant coating, Stainless steel terminals. This products is consumable for Capacitor Charging and Discharging Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hsr/
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
Recommended
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
Datasheet KBM HQ
This document provides specifications for the KBM-HQ CaP System BNC Male Connector. It has a return loss greater than 30 dB up to 3 GHz, making it a high quality connector suitable for cables from 0.3 to 1.1 mm in diameter, such as RG6, RG59, and RG178. The connector has mechanical parts made from materials like brass, beryllium copper, HDPE, zinc, and rubber. It can operate in temperatures ranging from -40 to 120 degrees Celsius.
Abtech APC Photocell - Spec Sheet
The APC photocell is a device that can automatically control lighting in hazardous areas without requiring extensive rewiring. It uses proven circuitry in an enclosure that provides ingress and UV protection. The photocell can switch lights off when a certain light level is reached, helping to reduce energy costs. It is rated for use in Zone 1 hazardous areas and has IP66/67 ingress protection.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
Datasheet CaP
This document provides product specifications for a CaP F MALE CONNECTOR. The connector is suitable for cables with inner conductors from 0.3 to 1.1 mm, has impedances of 50-75-92 ohms, and operates at frequencies up to 3 GHz. It has screening attenuation greater than -80 dB and return loss greater than -24 dB at 3 GHz. The connector body is made from a protected plastic compound that has a tensile strength of 17 MPa and is halogen free and UV protected.
chenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outd...
chenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outdoor Use (12V 400W)
Description: IP63 AC 170V-264V To DC 12v/24V 400W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 24V 400W Shell Material: Aluminum
Protection: Shortcircuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
This product is a type of Symmetry Resistors, which is a type of Wire Wound Resistors. Features of this product are: Wire wound symmetry resistors, UL approved flame retardant coating, Stainless steel terminals. This products is consumable for Capacitor Charging and Discharging Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hsr/
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
DO Transmitter : DO-TX-22
This document provides technical specifications for a gas sensor including:
- It measures gas concentrations from 0 to 20.9 PPM and provides an output of 4 to 20 mA.
- It has a response time of less than 10 mSec for a 10 to 90% output change and operates from 0 to 50°C.
- Additional parameters specified include power supply, cable length, linearity, materials of construction, and warranty information.
CR1609L030BN8
This document provides specifications for a rectangular micro-speaker measuring 16x9x3mm. It outlines the speaker's electrical and acoustic specifications including its rated input power, impedance, sound pressure level, resonance frequency, frequency range, and distortion. It also describes the speaker's construction, typical frequency response, environmental test requirements, dimensions, PCB layout, and packing information.
Carbon monoxide alarm (co alarm)
This document provides information about the VST-C598IH carbon monoxide alarm, including:
- It has AC/DC power sources, non-radioactive technology, and detects CO at thresholds of 50, 100, and 300 ppm at varying time intervals.
- Features include a quick fix mounting bracket, simple AC connector, battery tamper resistance, interconnectability up to 40 alarms, and LED indicators.
- It has low battery, battery missing, and hush/test functions and automatically resets when CO clears.
Modicon quantum pac 140 dai55300
This document provides product details for a Modicon Quantum 32-input discrete input module. It has 32 digital inputs that can detect 115V AC signals, organized into 4 groups. The module connects to Modicon Quantum automation platforms and is compatible with Unity Pro and ProWORX32 software. It has LED indicators for power, faults, and input status. Environmental standards include CE, CSA, UL, and it is RoHS compliant. The module has an 18 month warranty and stock is normally available.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
1550nm DFB Laser Diode Test Report
Civillaser's 1550nm DFB Laser Diode Test Report
Pin has N-type and S-type to choose from.
Pigtailed fiber type can be customized.
PM fiber or SM fiber can be choose.
Chenglian ip63-rainproof-power-supply-300 w-12v
chenglian Ac-Dc 12V LED Power Supply 300W 25A Constant Voltage Rainproof Outdoor Use (12V 300W)
Description: IP63 AC 170V-264V To DC 12v/24V 300W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 12V 300W Shell Material: Aluminum
Protection: Short circuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
CS13M04YO8
This document provides the specifications for a speaker, including:
1. The speaker should operate within temperature ranges of -30°C to 85°C and humidity ranges of 45-85%. Testing conditions should be 20°C±2°C and 60-70% humidity.
2. Electrical specifications include a rated input power of 0.7W, impedance of 8Ω±15%, and sound pressure level of 88dB at various frequencies.
3. Testing methods include measuring the speaker's frequency response using an audio analyzer and microphone.
4. The speaker must pass environmental tests including temperature, humidity, and drop tests.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
HVE
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
CATU CC-245-50 Voltage Detector (HV) 150kV
The document describes voltage detectors that are used for outdoor high voltage lines and switchgear equipment. The detectors have a precise and stable operating threshold to detect voltages without interference from induced voltages. They provide double signaling with bright flashing lights and an audible alarm that can be seen and heard from over 50 meters away. The detectors are robust and resistant to impacts, vibrations, extreme temperatures, and humidity. They are available in different models for various voltage ranges.
CATU Voltage Detectors With LED's For Indoor Use
This document provides information on various voltage detector models for identifying the presence of electricity in indoor and outdoor applications. It describes compact, portable detectors that indicate voltage through LED lights and can be tested through a piezo generator. Models listed include detachable contact electrodes, telescopic sticks, and units contained in holsters or protective sheaths for wall mounting. They detect voltages ranging from 5 to 36 kV for use on electrical equipment and installations.
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...Thorne & Derrick International
Martindale Electric owns Metrohm low voltage products. The Martindale Electric product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring and safely prove dead.
Martindale Electric has always been a pioneer in test equipment. Martindale Electric firsts include:
The first ever socket tester
The first safety insulation tester
The first self proving non-contact voltage indicator
The first low cost fuse finder
The first non-trip, no battery, no test button, loop tester displaying PE, PN PFC & PSC
The first handheld insulation tester with polarisation index
The first advanced socket tester, as defined by the Health and Safety Executive
The smallest and lightest handheld PAT Tester
Rsf electronik ms82_catalog
The document describes an interferential linear encoder called the MS 82 Series. It uses a glass or glass ceramic scale with a phase grating and a scanning reticle to produce two 90-degree phase shifted sinusoidal measurement signals. This allows it to achieve high resolution position measurement over long travel distances at high speeds, with integrated interpolation providing sub-micron resolution. Key features include a non-contact reflective design, adjustable reference marks, and various output options.
Tempest EMI Filters
Premier’s Tempest EMI Power Line Filters provide off the shelf performance for both moderate and severe environments.
Visit site for more information about Tempest EMI Filters.
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
The document is a product specification sheet for the Q.PEAK DUO L-G5.2 380-395 solar module from Hanwha Q CELLS. The module uses Q.ANTUM cell technology and has a power output of 380-395 watts. It provides high yields, optimal performance in various weather conditions, and long-term yield security through various technologies. The module comes with a 12-year product and 25-year linear performance warranty.
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
Codatron ht high voltage regulators
Codatron ht high voltage regulatorsCodatron ht high voltage regulatorsGeneral Description – Oil 4 Less®
LLC is the sole exclusive manufacturer of the
Codatron®
HT high voltage shunt regulators. They are designed to give superior regulation
over rapid temperature changes, and are for use in high temperature environments. The
regulation of the Codatron®
HT over rapid temperature changes is superior to any other
currently manufactured high voltage regulator. The Codatron®
HT regulator acts like a
high voltage zener, but with low noise and a low temperature coefficient (TC). The
regulated voltages offered include those available for the original, now discontinued,
Victoreen Corotron, and many more. The Codatron®
HT regulator has been optimized to
operate at approximately 60 microamps, the current favored by many well logging tool
technicians, but functions well over a wide range of currents up to a maximum current
rating of 500 microamps. A much higher pulse or transient current rating is allowed due to
the unique electrical characteristics of the Codatron HT. A
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
Micro e systems_-25b_f_s_l_datasheet
The Model 25B-F/S/L is an incremental optical rotary encoder designed for rugged applications. It has features such as a 100,000 hour MTBF LED light source, 200kHz frequency response, and 50G shock resistance. It is available in flange or servo mount configurations and can provide high resolution position feedback for machine tools, robots, and other industrial equipment.
More Related Content
What's hot
DO Transmitter : DO-TX-22
This document provides technical specifications for a gas sensor including:
- It measures gas concentrations from 0 to 20.9 PPM and provides an output of 4 to 20 mA.
- It has a response time of less than 10 mSec for a 10 to 90% output change and operates from 0 to 50°C.
- Additional parameters specified include power supply, cable length, linearity, materials of construction, and warranty information.
CR1609L030BN8
This document provides specifications for a rectangular micro-speaker measuring 16x9x3mm. It outlines the speaker's electrical and acoustic specifications including its rated input power, impedance, sound pressure level, resonance frequency, frequency range, and distortion. It also describes the speaker's construction, typical frequency response, environmental test requirements, dimensions, PCB layout, and packing information.
Carbon monoxide alarm (co alarm)
This document provides information about the VST-C598IH carbon monoxide alarm, including:
- It has AC/DC power sources, non-radioactive technology, and detects CO at thresholds of 50, 100, and 300 ppm at varying time intervals.
- Features include a quick fix mounting bracket, simple AC connector, battery tamper resistance, interconnectability up to 40 alarms, and LED indicators.
- It has low battery, battery missing, and hush/test functions and automatically resets when CO clears.
Modicon quantum pac 140 dai55300
This document provides product details for a Modicon Quantum 32-input discrete input module. It has 32 digital inputs that can detect 115V AC signals, organized into 4 groups. The module connects to Modicon Quantum automation platforms and is compatible with Unity Pro and ProWORX32 software. It has LED indicators for power, faults, and input status. Environmental standards include CE, CSA, UL, and it is RoHS compliant. The module has an 18 month warranty and stock is normally available.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
1550nm DFB Laser Diode Test Report
Civillaser's 1550nm DFB Laser Diode Test Report
Pin has N-type and S-type to choose from.
Pigtailed fiber type can be customized.
PM fiber or SM fiber can be choose.
Chenglian ip63-rainproof-power-supply-300 w-12v
chenglian Ac-Dc 12V LED Power Supply 300W 25A Constant Voltage Rainproof Outdoor Use (12V 300W)
Description: IP63 AC 170V-264V To DC 12v/24V 300W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 12V 300W Shell Material: Aluminum
Protection: Short circuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
CS13M04YO8
This document provides the specifications for a speaker, including:
1. The speaker should operate within temperature ranges of -30°C to 85°C and humidity ranges of 45-85%. Testing conditions should be 20°C±2°C and 60-70% humidity.
2. Electrical specifications include a rated input power of 0.7W, impedance of 8Ω±15%, and sound pressure level of 88dB at various frequencies.
3. Testing methods include measuring the speaker's frequency response using an audio analyzer and microphone.
4. The speaker must pass environmental tests including temperature, humidity, and drop tests.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
HVE
This document summarizes the specifications and characteristics of shunt resistors for energy meters. The key points are:
- The shunt resistors have extremely low resistance values below 0.0005 ohms and very low inductance below 0.5nH. They are designed for precision energy meter applications.
- The resistors have a power rating of up to 5W and can withstand high pulse power of 1KW for 0.1 seconds. They are made of electron beam welded copper or manganin copper alloy.
- The resistors have tight tolerance of +/-5% resistance, temperature coefficient below 20ppm/K, and negligible thermal EMF of 3uV/C. They are tested to withstand various
CATU CC-245-50 Voltage Detector (HV) 150kV
The document describes voltage detectors that are used for outdoor high voltage lines and switchgear equipment. The detectors have a precise and stable operating threshold to detect voltages without interference from induced voltages. They provide double signaling with bright flashing lights and an audible alarm that can be seen and heard from over 50 meters away. The detectors are robust and resistant to impacts, vibrations, extreme temperatures, and humidity. They are available in different models for various voltage ranges.
CATU Voltage Detectors With LED's For Indoor Use
This document provides information on various voltage detector models for identifying the presence of electricity in indoor and outdoor applications. It describes compact, portable detectors that indicate voltage through LED lights and can be tested through a piezo generator. Models listed include detachable contact electrodes, telescopic sticks, and units contained in holsters or protective sheaths for wall mounting. They detect voltages ranging from 5 to 36 kV for use on electrical equipment and installations.
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...Thorne & Derrick International
Martindale Electric owns Metrohm low voltage products. The Martindale Electric product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring and safely prove dead.
Martindale Electric has always been a pioneer in test equipment. Martindale Electric firsts include:
The first ever socket tester
The first safety insulation tester
The first self proving non-contact voltage indicator
The first low cost fuse finder
The first non-trip, no battery, no test button, loop tester displaying PE, PN PFC & PSC
The first handheld insulation tester with polarisation index
The first advanced socket tester, as defined by the Health and Safety Executive
The smallest and lightest handheld PAT Tester
Rsf electronik ms82_catalog
The document describes an interferential linear encoder called the MS 82 Series. It uses a glass or glass ceramic scale with a phase grating and a scanning reticle to produce two 90-degree phase shifted sinusoidal measurement signals. This allows it to achieve high resolution position measurement over long travel distances at high speeds, with integrated interpolation providing sub-micron resolution. Key features include a non-contact reflective design, adjustable reference marks, and various output options.
Tempest EMI Filters
Premier’s Tempest EMI Power Line Filters provide off the shelf performance for both moderate and severe environments.
Visit site for more information about Tempest EMI Filters.
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
The document is a product specification sheet for the Q.PEAK DUO L-G5.2 380-395 solar module from Hanwha Q CELLS. The module uses Q.ANTUM cell technology and has a power output of 380-395 watts. It provides high yields, optimal performance in various weather conditions, and long-term yield security through various technologies. The module comes with a 12-year product and 25-year linear performance warranty.
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
Codatron ht high voltage regulators
Codatron ht high voltage regulatorsCodatron ht high voltage regulatorsGeneral Description – Oil 4 Less®
LLC is the sole exclusive manufacturer of the
Codatron®
HT high voltage shunt regulators. They are designed to give superior regulation
over rapid temperature changes, and are for use in high temperature environments. The
regulation of the Codatron®
HT over rapid temperature changes is superior to any other
currently manufactured high voltage regulator. The Codatron®
HT regulator acts like a
high voltage zener, but with low noise and a low temperature coefficient (TC). The
regulated voltages offered include those available for the original, now discontinued,
Victoreen Corotron, and many more. The Codatron®
HT regulator has been optimized to
operate at approximately 60 microamps, the current favored by many well logging tool
technicians, but functions well over a wide range of currents up to a maximum current
rating of 500 microamps. A much higher pulse or transient current rating is allowed due to
the unique electrical characteristics of the Codatron HT. A
What's hot (19)
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
Similar to Datasheet GC
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
Micro e systems_-25b_f_s_l_datasheet
The Model 25B-F/S/L is an incremental optical rotary encoder designed for rugged applications. It has features such as a 100,000 hour MTBF LED light source, 200kHz frequency response, and 50G shock resistance. It is available in flange or servo mount configurations and can provide high resolution position feedback for machine tools, robots, and other industrial equipment.
FMA500_datasheet
The FMA500 is a high-gain pre-driver amplifier operating from DC to 23 GHz. It provides 13 dB of small signal gain and 4 Vpp of output at bit rates up to 12.5 Gb/s. The chip is 1.18 x 1.50 mm in size and is designed as the pre-driver stage for OC-192 modulator driver amplifiers in optical data communication applications. It can also be used as an EA driver amplifier or photoreceiver TIA.
Optilab lr40eh
The PD-40 is a 40 GHz bandwidth InGaAs PIN photodetector optimized for wavelengths between 1250-1650 nm. It features high linearity up to 40 mW of input power and a flat frequency response within ±1 dB up to 40 GHz, making it suitable for applications requiring wide bandwidth such as analog RF transmission and digital signals up to 40 Gbps. The photodetector comes in a standard 2-pin package with K connector and can be ordered with or without an external protective housing.
Vibrating Rod Point Level Switch for Solids
We are an ISO 9001:2015 certified manufacturer & exporter of level sensing, measurement, indication and control instruments.
Trumen came into existence in 2009 and initially started with manufacturing of Tuning Fork Level Switches for liquid and solid applications. With time, the manufacturing range increased with addition of Capacitance Level Transmitter & Capacitance Level Switches, RF Admittance Level Switches, Rotating Paddle Level Switches, Conductivity Type Level Switches, Vibrating Rod Level Switches, Hydrostatic Level Transmitter, Radar Level Transmitter & Ultrasonic Level Transmitter.
Trumen is a technocrat driven organization aimed at providing top-of-the-range and high quality level measurement and process control instruments. Formed by the pioneers who devoted their respective lives in development, design and delivery of solution to the problems faced in the field of level sensing and process measurements. Trumen has a fixed point agenda about "sensing matters", and each device created at Trumen is thoroughly tested to pass the quality norms set in-house, in order to give the best performance in all operating conditions.
Netzer DS 37 16 Specsheet
The document provides specifications for the DS-37-16 Electric Encoder. It is a hollow shaft encoder that provides absolute position measurement with various output options. Key specifications include a resolution of 17 bits, static error of less than 25 mDeg, operational speed of 3,500 rpm, and operating temperature range of -55°C to +125°C. It has generous mounting tolerances and requires no bearings, making it reliable and suitable for demanding applications.
LMV221 sdx
The LMV221 is a 40 dB RF power detector intended for use in CDMA and WCDMA applications. It has an RF frequency range from 50 MHz to 3.5 GHz and provides an accurate output voltage that relates linearly to the RF input power in dBm. The device operates with a single 2.7V to 3.3V supply and has an RF power detection range from −45 dBm to −5 dBm. It is offered in a small 2.2 mm x 2.5 mm x 0.8 mm package.
Acs712
The document describes an integrated current sensor that provides precise current sensing for industrial and commercial applications. It features low noise analog signal conditioning, adjustable bandwidth via an external filter pin, and 5 microsecond rise time. The sensor outputs a voltage proportional to AC or DC current in a range of ±5, ±20, or ±30 amps, with 1.5% maximum error and 80 kHz bandwidth. It is provided in a small SOIC8 package.
Mrf6 s18100n pwrmosfet
This document provides data sheets for the MRF6S18100NR1 and MRF6S18100NBR1 RF power field effect transistors from Freescale Semiconductor. The transistors are designed for GSM and GSM EDGE base station applications from 1800-2000 MHz. The document includes maximum ratings, electrical characteristics, typical performance metrics like power gain and efficiency, and test circuit schematics and component values. Performance is specified for both continuous wave and GSM/EDGE modulated signals.
Ls catalog thiet bi dien electric products e 1104
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Ls catalog thiet bi dien electric products e 1104_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
LS Circuit Breaker Catalogue
Đang phục vụ cho hơn 30% nhu cầu của Việt nam với mức chất lượng cao nhất của thế giới ( high-end và Standard range). Sản phẩm này cũng đang được bán tại Mỹ, Nhật, Eu, và Trung đông,… Tại Việt nam, từ năm 1998 đến nay, LS đã và đang cung cấp cho hàng ngàn công trình lớn nhỏ tại Việt nam bao gồm các nhà đầu tư Nhật bản, Hàn Quốc, và các nhà đầu tư Việt nam.
Catalog ls lvcb dienhathe.vn
This document provides information on electric equipment including miniature circuit breakers, residual current circuit breakers, and surge protective devices. It includes specifications such as rated current, number of poles, rated voltage, breaking capacity, standards, and dimensions for different product types. Replacement parts and operation status indicators are noted. Product series include BKN, BKH, RKP, BKS, and SP.
Catalog ls lvcb
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Rsf electronik incremental_rotary_encoder_dg118_specsheet
The document provides technical specifications for an incremental rotary encoder model DG 118. It lists details such as the encoder can measure up to 5400 lines per revolution, has integrated times 5 or times 10 subdividing electronics as an option, and has mechanical dimensions of a maximum height of 55mm, 10mm shaft length and 58mm diameter. The encoder has an operating temperature range of 0 to 80 degrees Celsius and outputs square wave signals at sampling rates of 300kHz at 5V and 160kHz at 10-30V supply voltage.
Rsf electronik incremental_rotary_encoder_dg118_specsheet
The document provides technical specifications for an incremental rotary encoder model DG 118. It lists details such as the encoder can measure up to 5400 lines per revolution, has integrated times 5 or times 10 subdividing electronics as an option, and mechanical specifications for dimensions, housing material, shaft material and load limits. It also details the encoder's operating temperature range, sealing level, EMC compliance, electrical specifications for supply voltage, power consumption, output signals and sampling rates.
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
This document provides specifications for a 10Gb/s DWDM XFP transceiver module that operates at wavelengths across the C band from 1528.77nm to 1561.42nm over single mode fiber links up to 80km. It uses EML laser transmitters and APD photodetectors, supports data rates of 9.95-11.3Gb/s, and complies with the XFP MSA specification including digital diagnostics via a 2-wire interface.
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver
Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU Grid C Band, EML/PIN
Single mode, 40km, 0~70°C
Acs712 datasheet
The ACS712 is a fully integrated, Hall effect-based linear current sensor IC that provides precise current sensing with 2.1 kVRMS isolation. It outputs an analog voltage signal linearly proportional to the primary sampled current. Key features include low noise, 80 kHz bandwidth, 1.5% accuracy, and isolation from the current path. It is offered in models optimized for currents of ±5A, ±20A, and ±30A and is packaged in a small SOIC8 package.
Similar to Datasheet GC (20)
Ls catalog thiet bi dien electric products e 1104_dienhathe.vn
Ls catalog thiet bi dien electric products e 1104_dienhathe.vn
Rsf electronik incremental_rotary_encoder_dg118_specsheet
Rsf electronik incremental_rotary_encoder_dg118_specsheet
Rsf electronik incremental_rotary_encoder_dg118_specsheet
Rsf electronik incremental_rotary_encoder_dg118_specsheet
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
Recently uploaded
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Recently uploaded (20)
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Datasheet GC
- 1. PRODUCT DATASHEET GC CaP System F FEMALE CONNECTOR Stripping Dimension: Utilize these Tools Suitable for Cables: RG6, RG59, RG178, ... suitable for all cable with inner conductor from Ø 0,3 up to Ø 1,1 mm (from AWG 28 to AWG 18) Electrical Specification Impedance: Frequency: Dielectric W/V: Insulation res: Return Loss: 1:Reflection Log Mag 10.0 dB/ Ref -25.00 dB Mechanical Specification dB 15 5 -5 3 1 -15 4 2 1: 75 Ohm 0-2 GHz 500 Veff 5000 M-Ohm Body Material: Shrapnel: Insulator: CaP®: Weight: Environmental Specification Operating Temp: 1 Zinc - Nickel plated P. Bronze - Nickel plated Polyethylene Protected Plastic Compound 8.9 g - 40 ÷ + 120 °C -35 -45 1:Mkr (MHz) dB -55 1: 500.0000 Each F female to F female connector is sold with 2 CaPs -24.898 2: 1000.0000 -17.220 3: 1500.0000 -14.972 -65 4: 2000.0000 -13.654 Start 0.300 MHz Stop 2 000.000 MHz All measures are in millimeters TELECOM & SECURITY: Viale Stefano Tinozzi, snc - Zona Ind.le Interporto d’Abruzzo - I-65024 Manoppello (PE) - ITALY Tel. +39.085.8569020 - Fax +.39.085.8569707 - www.telecomsecurity.it - info@telecomsecurity.it - Skype: telecomsecurity_info Technical data and characteristics are not binding an may be changed without prior notice