If plants get the right amount of light, they tend to grow faster. But always remember, for plants diffused light is better than direct sunlight. So how do we produce diffused light? Obviously using greenhouse coverings by Green House Panels.
3. ● More than anything else, plants need sunlight the most. Like water and food requirements of a human
being, plants thrive for the sunlight. If they get the right amount of light, they tend to grow faster. But
always remember, for plants diffused light is better than direct sunlight. So how do we produce
diffused light? Obviously using greenhouse coverings.
● They offer innumerable advantages and are able to meet your specific requirements concerning local
climate, budget and the site location. The R-value and U-value should be taken into consideration for
measuring the material’s capability of the greenhouse panels. R values define the material’s insulation
ability while the U value measures the heat loss. A lower U-value is preferred for greenhouse covering.
4. ● While talking about varieties, polycarbonate coverings for commercial greenhouse offer an extra
transmission and thermal insulation as compared to that of glass. Greenhouse polycarbonates
covering are light in weight and meet both the structural and maintenance requirements of the panel
system.
● These panels have huge control over the integrated drips and condensations and thus help in reducing
the fungal infection caused by viruses, and bacteria. Controlled conditions also improve light
transmittance and reduce reflectivity.
● Polycarbonates coverings are designed in a way that looks like an insulated honeycomb structure. This
structure preserves heat and saves heating costs. Twin-walled polycarbonates are best for cooler
climates and can withstand the snow loads.
5. Feature highlights
Polycarbonates are prone to condensate formation specifically in enclosed environments like greenhouses.
These are available in corrugated and flatforms with single, double walls and are stronger than any other
form of coverings. The R-value range is between 1.5 to 2and offers features like sunlight diffusion and
efficiently provides insulation.
If you invest in polycarbonates greenhouse covering, you will be served for a year getting the bang for the
buck. They last for years and are the best and most expensive materials. The only disadvantage, it scratches
easily and hence utmost care has to be taken while travelling. Regular cleaning with a piece of cloth can
preserve its longevity. It is the best option for outdoor applications.
Other options for greenhouse coverings are:
7. They are extremely strong and durable and possess the R-value similar to that of greenhouse
plastic glass. They provide good diffusion and light transmission for the greenhouse coverings.
Leaving them untreated, UV rays can demolish the fibreglass panels mitigating their efficiencies
in the long run.
But if well-maintained it remains extremely strong and would stay for years. Even some of the
manufacturers offer 10 years of guarantee which includes a warranty against yellowing and
structural failure.
9. This is the most cost-effective option most commonly used for greenhouse coverings. They are
easy to install but are not a continual solution for greenhouse coverings. They are available in
one or two layers coating. You can cover it with any one of the multiple coatings which further
provides UV protection, thermal protection and anti-drip protection from the heat.
The R-value of Polyethylene films ranges from 0.87 to 1.7. Due to the porous nature of the
material, they allow plants to breathe and grow well.
10. The best option for the greenhouse covering will facilitate higher yields and savings to the
horticulture market. The benefits highlights of the same are:
● Increased yield per hectare;
● Low energy consumption;
● Needs less maintenance;
● Less fungicides need;
● Provides a temperature controlled environment;
● And optimized light transmission and diffusion;
● It provides resistance against heat, cold, wind, rain and insects.
● It fits well in the Gothic arch, Quonset arch, sawtooth, a frame, wide span, retrofitted
glasshouses and more.
11. Owing to the recent renovations and legalization policies medical cannabis faced several issues
and hence arose the need for greenhouse windows which will have full control over the day
and night cycles.
Choosing the right ones for your operation will make a huge difference and the saying “you get
what you pay for” will fall true. Hope you can make the best of the deals for your greenhouse
covering.
12. Contact Us
Company Name : Sheet Plastics
Contact Person : Hollie Nixon
Address : Unit 18 Cottage Lane Industrial Estate, Swannington Lane,
Leicestershire, England, UK
Phone(s) : 01455 818913
Fax : +61 2 9437 4214
Website :- https://www.sheetplastics.co.uk/