Madge Collage 743/744/763/764 4 port 155 Mbps Modules (Historical documentation)

1. Madge Collage 743/744/763/764
4 Port 155 Mbps Modules
AT M C O N N E C T I O N
The Madge Collage
743, 744, 763 and
764 ATM interface
modules deliver high
speed connections
with a ride range of
media options.
H I G H P E R F O R M A N C E AT M C O N N E C T I V I T Y
The Collage 743, 744, 763 and 764 ATM
interface modules provide the physical
interface ports for connecting the Collage
740 Backbone ATM switch to other ATM
devices and networks. Each module
provides four ports of 155 Mbps ATM
connectivity using either Multimode Fiber
(MMF), Single Mode Fiber (SMF) or
Unshielded Twisted Pair (UTP) as the
physical transmission medium.
A D VA N C E D F U N C T I O N A L I T Y
The ATM interface modules work with the
Collage 740 Backbone ATM switch to
deliver advanced functionality including:
. Per VC statistics gathering
. Traffic management
. ABR cell re-routing
. Peak Cell Rate traffic shaping
M A X I M U M N E T W O R K AVA I L A B I L I T Y
Each ATM interface module supports hot
swap and hot insertion to minimize network
down time and add to the fault tolerance
capabilities of the Collage 740.
High performance 155 Mbps ATM Modules for the Madge Collage™
740 Backbone ATM
Switch deliver a wide range of ATM connectivity.
COLLAGE 743 4 POR T 155 MBPS MMF MODULE
With a range of over 2 km on multimode
fibre, the Collage 743 is ideal for
interconnecting ATM switches and for
connecting access switches and high
performance servers or workstations to the
ATM network.
C O L L A G E 7 4 4 4 P O R T 1 5 5 M B P S U T P M O D U L E
The UTP module is designed to use low
cost shielded or unshielded category 5
cabling. With ranges of up to 100m, this
module would typically be used for 155
Mbps ATM to the desktop over existing
cabling or for low cost server connections.
COLLAGE 763 4 PORT 155 MBPS SMF MODULE
The Single Mode Fiber module will
normally be used where a longer reach is
required. The range of 15 km makes it ideal
for high speed campus links or for
connecting to a public ATM WAN service.

2. C O L L A G E 7 6 4 4 P O R T 1 5 5 M B P S M X F M O D U L E
The mixed fiber module increases the flexibility of deploying SMF interfaces by providing
two SMF ports and two regular MMF ports.
M A D G E N E T W O R K S S E R V I C E A N D S U P P O R T
The Madge Collage 743, 744, 763 and 764 ATM interface modules are backed by Madge
Networks’ expertise in networking and a worldwide network of Value Added Resellers.
Customers can also access up-to-date technical information from the Madge World Wide
Web site (http://www.madge.com). The Collage 743, 744, 763 and 764 come with a one-year
hardware warranty.
Madge Collage
743/744/763/764
4 Port 155 Mbps
Modules
Madge Networks
Americas
2310 North First Street
San Jose, CA 95131-1011
United States
Tel +1 408 955 0700
Fax +1 408 955 0970
http://www.madge.com
Asia, Australia & New Zealand
12/F Li Po Chun Chambers
189 Des Voeux Road
Central
Hong Kong
Tel: +852 2593 9888
Fax: +852 2519 8022
http://www.madge.com
Europe, Middle East & Africa
Knaves Beech Business Park
Loudwater
High Wycombe
Bucks HP10 9QZ
England
Tel +44 1628 858000
Fax +44 1628 858011
http://www.madge.com
Japan
Mita NN Building
1-23, Shiba 4-chome
Minato-Ku, Tokyo 108
Japan
Tel +81 3 5232 3281
Fax +81 3 5232 3208
http://www.madge.com
Madge, the Madge logo, and Collage are trademarks, and in some jurisdictions may be registered trademarks, of Madge Networks or its affiliated companies. Other trademarks
appearing in this document are the property of their respective holders.
© Copyright 1997 Madge Networks. All Rights Reserved. 60000242 6/97
P R O D U C T S P E C I F I C AT I O N S
F U N C T I O N S
4 Port 155.52 Mbps OC-3/STM-1 line interface modules
for Collage 740 Backbone ATM switch
SONET/SDH selectable per port
RM cell re-routing for ABR/ER flow control
Early Packet Discard and Partial Packet Discard
Hot Swap/Hot Insertion
Peak cell rate traffic shaping (Traffic Pacing)
S TAT I S T I C S
Statistics: Per VC at ATM layer and per port
at physical layer
Error Count: B1, B2, B3, line FEBE, path FEBE,
far end LOC.
Alarms: LOS, LOF, OOF, LOP, LOC FERF
I N D I C AT O R S
One LED Indicator Blank (No signal received)
Per Port: Red (Far-end no signal received)
Orange (Idle cells received)
Green (Active cells received)
P H Y S I C A L C H A R A C T E R I S T I C S
Dimensions (WxHxD): 201mm x 29 mm x 258 mm
Power Consumption: 5 A @ 5V Typical
Operating
Temperature: 0 - 40 Celsius (5% to 95%
non-condensing humidity)
A G E N C Y A P P R O VA L S
EMC: FCC Part 15, Class A
EN55022, Class A
VCCI, Class 1
DOC Class A
Safety: UL 1950, EN60950;
CSA 22.2/950-93
I N T E R FA C E S
C O L L A G E 7 4 3 C O L L A G E 7 4 4 C O L L A G E 7 6 3 C O L L A G E 7 6 4
Port Capacity/Type: 4 ports MMF 4 Ports UTP 4 ports SMF 2/2 ports mixed
Physical Media: 62.5/125 um MMF Category 5 UTP 9/125 um SMF 62.5/125 MMF
9/125 um SMF
Port Connector: Duplex SC RJ45 Duplex SC Duplex SC
Data Rate: 155.52 Mbps 155.52 Mbps 155.52 Mbps 155.52 Mbps
Frame Format: OC-3c/STM-1 OC-3c/STM-1 OC-3c/STM-1 OC-3c/STM-1
Wavelength: 1270 - 1380 nm N/A 1260 - 1360 nm 1270 - 1380 nm
1260 - 1360 nm
Optical Source: LED N/A LASER LED (MMF)
LASER (SMF)
Transmit Output Power: -19 to -14 dBm 1V pk-pk -15 to -8 dBm -19 to -14 dBm
-15 to -8 dBm
Receiver Sensitivity: -30 to -14 dBm -30 to -8 dBm -30 to -14 dBm
-30 to -8 dBm
Maximum Cable Reach: 2 km 100 m 15 km 2 km (MMF)
15 km (SMF)
Maximum No. of VCs: 8,192 per port 8,192 per port 8,192 per port 8,192 per port
Maximum No. of VPs: 128 per port 128 per port 128 per port 128 per port
O R D E R I N G I N F O R M AT I O N
Part No: 57-73 57-76 57-79 57-80
Description: Collage 743 Collage 744 Collage 763 Collage 764
4 port 155 Mbps 4 ports 155 Mbps 4 port 155 Mbps 4 port 155 Mbps
MMF Module UTP Module SMF Module MXF Module