2. What is Solar Energy?
Originates with the
thermonuclear fusion
reactions occurring in the
sun.
Represents the entire
electromagnetic radiation
(visible light, infrared,
ultraviolet, x-rays, and radio
waves).
Radiant energy from the sun
has powered life on Earth for
many millions of years.
3. Advantages and Disadvantages
Advantages
All chemical and radioactive polluting byproducts of the
thermonuclear reactions remain behind on the sun, while only pure
radiant energy reaches the Earth.
Energy reaching the earth is incredible. By one calculation, 30 days
of sunshine striking the Earth have the energy equivalent of the total
of all the planet’s fossil fuels, both used and unused!
Disadvantages
Sun does not shine consistently.
Solar energy is a diffuse source. To harness it, we must concentrate it
into an amount and form that we can use, such as heat and electricity.
Addressed by approaching the problem through:
1) collection, 2) conversion, 3) storage.
4. Solar Energy to Heat Living Spaces
Proper design of a building is for it to act as a solar
collector and storage unit. This is achieved through
three elements: insulation, collection, and storage.
5. Solar Energy to Heat Water
A flat-plate collector is used
to absorb the sun’s energy to
heat the water.
The water circulates
throughout the closed system
due to convection currents.
Tanks of hot water are used
as storage.
7. Solar Cells Background
1839 - French physicist A. E. Becquerel first recognized the photovoltaic
effect.
1883 - first solar cell built, by Charles Fritts, coated semiconductor
selenium with an extremely thin layer of gold to form the junctions.
1954 - Bell Laboratories, experimenting with semiconductors, accidentally
found that silicon doped with certain impurities was very sensitive to light.
Daryl Chapin, Calvin Fuller and Gerald Pearson, invented the first
practical device for converting sunlight into useful electrical power.
Resulted in the production of the first practical solar cells with a sunlight
energy conversion efficiency of around 6%.
1958 - First spacecraft to use solar panels was US satellite Vanguard 1
http://en.wikipedia.org/wiki/Solar_cell
9. The heart of a photovoltaic system is a solid-state device called a
solar cell.
How does it work
10. Energy Band Formation in Solid
Each isolated atom has discrete energy level, with two electrons of
opposite spin occupying a state.
When atoms are brought into close contact, these energy levels split.
If there are a large number of atoms, the discrete energy levels form a
“continuous” band.
11. Energy Band Diagram of a Conductor,
Semiconductor, and Insulator
a conductor a semiconductor an insulator
Semiconductor is interest because their conductivity can be readily modulated
(by impurity doping or electrical potential), offering a pathway to control electronic
circuits.
12. Silicon
-
Si Si Si
Si
Si
Si
Si
Si
Si
Shared electrons
Silicon is group IV element – with 4 electrons in their valence shell.
When silicon atoms are brought together, each atom forms covalent
bond with 4 silicon atoms in a tetrahedron geometry.
13. Intrinsic Semiconductor
At 0 ºK, each electron is in its lowest energy state
so each covalent bond position is filled. If a small
electric field is applied to the material, no electrons
will move because they are bound to their individual
atoms.
=> At 0 ºK, silicon is an insulator.
As temperature increases, the valence electrons
gain thermal energy. If a valence electron gains
enough energy (Eg), it may break its covalent bond
and move away from its original position. This
electron is free to move within the crystal.
Conductor Eg <0.1eV, many electrons can be
thermally excited at room temperature.
Semiconductor Eg ~1eV, a few electrons can be
excited (e.g. 1/billion)
Insulator, Eg >3-5eV, essentially no electron can
be thermally excited at room temperature.
14. Extrinsic Semiconductor, n-type Doping
Electron
-
Si Si Si
Si
Si
Si
Si
Si
As
Extra
Valence band, Ev
Eg = 1.1 eV
Conducting band, Ec
Ed ~ 0.05 eV
Doping silicon lattice with group V elements can creates extra electrons
in the conduction band — negative charge carriers (n-type), As- donor.
Doping concentration #/cm3 (1016/cm3 ~ 1/million).
15. Valence band, Ev
Eg = 1.1 eV
Conducting band, Ec
Ea ~ 0.05 eV
Electron
-
Si Si Si
Si
Si
Si
Si
Si
B
Hole
Doping silicon with group III elements can creates empty holes in the
conduction band — positive charge carriers (p-type), B-(acceptor).
Extrinsic Semiconductor, p-type doping
16. V
I
R O F
p n
p n
V>0 V<0
Reverse bias Forward bias
p-n Junction (p-n diode)
A p-n junction is a junction formed by combining p-type and n-type
semiconductors together in very close contact.
In p-n junction, the current is only allowed to flow along one direction
from p-type to n-type materials.
i
p n
V<0 V>0
depletion layer
- +
17. Solar Cells
Light-emitting Diodes
Diode Lasers
Photodetectors
Transistors
p-n Junction (p-n diode)
A p-n junction is the basic device component for many
functional electronic devices listed above.
18. How Solar Cells Work
Photons in sunlight hit the solar panel and are absorbed by semiconducting materials
to create electron hole pairs.
Electrons (negatively charged) are knocked loose from their atoms, allowing them to
flow through the material to produce electricity.
p n
- +
- +
- +
- +
- +
hv > Eg
19. The Impact of Band Gap on Efficiency
Efficiency, = (VocIscFF)/Pin Voc Eg, Isc # of absorbed photons
Decrease Eg, absorb more of the spectrum
But not without sacrificing output voltage
hv > Eg
-30
-20
-10
0
10
20
30
Current
Density
(mA/cm
2
)
1.0
0.8
0.6
0.4
0.2
0.0
Voltage (volts)
Jsc
Voc
FF
Dark
Light
Jmp
Vmp
Fill Factor, FF = (VmpImp)/VocIsc
Efficiency, = (VocIscFF)/Pin
20. Cost vs. Efficiency Tradeoff
Efficiency t1/2
Long d
High t
High Cost
d
Long d
Low t
Lower Cost
d
t decreases as grain size (and cost) decreases
Large Grain
Single
Crystals
Small Grain
and/or
Polycrystalline
Solids
22. 89.6% of 2007 Production
45.2% Single Crystal Si
42.2% Multi-crystal SI
Limit efficiency 31%
Single crystal silicon - 16-19%
efficiency
Multi-crystal silicon - 14-15%
efficiency
Best efficiency by SunPower Inc 22%
Silicon Cell Average Efficiency
First Generation
– Single Junction Silicon Cells
23. CdTe 4.7% & CIGS 0.5% of 2007 Production
New materials and processes to improve efficiency
and reduce cost.
Thin film cells use about 1% of the expensive
semiconductors compared to First Generation cells.
CdTe – 8 – 11% efficiency (18% demonstrated)
CIGS – 7-11% efficiency (20% demonstrated)
Second Generation
– Thin Film Cells
24. Enhance poor electrical performance while maintaining very low
production costs.
Current research is targeting conversion efficiencies of 30-60% while retaining
low cost materials and manufacturing techniques.
Multi-junction cells – 30% efficiency (40-43% demonstrated)
Third Generation
– Multi-junction Cells
28. Renewable Energy Consumption
in the US Energy Supply, 2007
http://www.eia.doe.gov/cneaf/solar.renewables/page/trends/highlight1.html
29. Top 10 PV Cell Producers
Top 10 produce 53% of world
total
Q-Cells, SolarWorld - Germany
Sharp, Kyocera, Sharp, Sanyo –
Japan
Suntech, Yingli, JA Solar – China
Motech - Taiwan
30. (in the U.S. in 2002)
1-4
¢
2.3-5.0 ¢ 6-8
¢
5-7
¢
Production Cost of Electricity
0
5
10
15
20
25
Coal Gas Oil Wind Nuclear Solar
Cost
6-7
¢
25-50 ¢
