Electrical and Instrumentation Engineer- MZameel CV
1. Page - 1 - of 4
MOHAMMED ZAMEEL
Contact details:
E-Mail:
mhdzamzameel@gmail.com
Tel:
Qatar: +974- 70152584
Skype ID : zameelzainudheen
Personal Data:
Date of Birth : January 29, 1988
Gender : Male
Nationality : Indian
Passport No. : J 1955755
Marital Status : Married
Visa Status : Transferable
(Qatar)
Languages known:
English, Hindi, Tamil and
Malayalam
Driving License:
Holding valid Qatar Driving
License
ELECTRICAL AND INSTRUMENTATION ENGINEER
PROFESSIONAL SUMMARY & SKILLS
Dynamic, performance-oriented, Electrical and Instrumentation
engineering and project management professional with more than 4
and half years of hands-on experience and expertise in spearheading
high quality EPC contract projects execution, construction,
installation and commissioning activities from feed design
verification to hand over.
Hands-on exposure to review of contracts and feed documents and all
activities related to procurement, installation, testing & commissioning
of electrical equipment’s and instrument’s.
Career span underscored with significant international exposure and
consistent progressive roles in the project sector.
Well versed in Qatar Construction Specification (QCS), QP
Specifications, Engineering standards and Qatar General Electricity &
Water Corporation (QGEWC) or Kahramaa.
Possess proven abilities in equipment’s installation and testing,
Corrective action reports, Engineering Standards.
Excellent problem identification and root cause analysis skills, strong
leadership and interpersonal traits with the zeal to take up
challenging, complex projects.
Strong team player with expertise in team leadership and
management.
.
CORE COMPETENCIES
Project Management and Execution
Contract Documents Review
Project Quality Needs Assessment/QA / QC Inspection Management
Project execution in coordination with ITP
Project Progress Monitoring and Site Supervision
Change Management through Field Instructions
Contractor / Subcontractor Liaison for Inspection, Installation, Testing
And Commissioning Projects
Project Procurement Planning and Management
Technical Support on inspection levels, materials testing Certification
and Handover Documentation
Reports Generation
EDUCATION
Bachelor of Engineering (2007 - 2011) – “Electronics &
Instrumentation Engineering” – From Anna University , Mahendra
Engineering College, Tamil Nadu, India.
Plus Two in CBSE (2005 - 2007) – From Amal Higher Secondary
School, Chemmanoor, Kerala, India.
SSLC (Secondary Education) 2005 from ICA Higher Secondary
School, Vadakkekad, Kerala, India.
IT SKILLS
Well acquainted with MS Office and Internet Applications
C U R R I C U L U M V I T A E
2. Page - 2 - of 4
CAREER PROFILE:
Hyosung Ebara Engineering Co. Ltd., Doha, Qatar Since 2012
Electrical and Instrumentation Engineer (February 2012 to Till date)
Project: Qatar Petroleum Direct - Engineering, Procurement, Installation and Commissioning for
the Phase- 1 of the Expansion of Existing Domestic Wastewater Treatment Plant and Construction of 3Nos of
Wastewater Pumping Station, Rising Mains and Trunk Sewers in Mesaieed (Community Area)
Responsibilities:
Supervise, coordinate material handling, installation, testing and commissioning as coordinated with
Vendor/ Manufacturer for all Electric works such as: 11Kv HV, 11Kv RMU, 415V LV Switch Gear
Panels, 11Kv/ 415V Transformers, 1600, 500, 135KVA Generators, Motor control panels (UMC
Controllers, Soft starter and VFD/VSDS panels), Industrial and Commercial type UPS and Battery Bank,
Capacitor panels, Distribution boards, Sub-main distribution boards, Lighting Control Panels, Control
panels, Building power units and lights, Earthing and Lightning) according to project specification,
approved shop drawings, method statement and procedure in order to meet the contract program .
Responsible for Troubleshooting, Servicing, Maintenance, fixing major electrical and instrument
problems such as HV, MV, LV panels, UMC controller, VFD/VSDS controller, Motor control soft starter
Altistart 48, Motorized Actuators (MOV), Control panels, Generators, Transformers, Industrial and
Commercial type UPS and Battery Banks, motors, Pumps,
Transmitters, analyzers.
Quality control roles: Inspection for Delivered materials as followed as per approved material
submittal, QCS, ES, rather it’s included in scope of work in contract. Inspection for equipment site
installation prior to invite inspection with client as followed as per ITP, Method statement and related
work instructions and liaison with the client for the approvals. Prepare inspection register record on
daily base, scheduling inspection with client and end-user.
Coordinate testing and inspection of offsite materials storage and testing.
Monitor the performance of all control activities and tests on electrical systems.
Participate in development of the Commissioning plan, roles and responsibilities. Implement
Commissioning plan.
Review and facilitate Daily Report process.
Coordinate schedule and activities with Mechanical QC Engineer for continuity of the two disciplines.
Prepare periodic maintenance and operation chart to maintain electrical and instrumentation
equipment’s.
Perform field inspections of electrical system installations verifying that work is in place according to
drawings and specs and work meets or exceeds code requirements.
Supervising wide range of field Electrical and Instrumentation works such as (cable laying, wiring,
terminations, energizing, testing, etc).
Responsible for implementation of Electrical work as per KAHRAMAA regulation standards and as per
Qatar Construction Standard.
Preparation of Materials Approval, Procurements, scheduling of works and all other related documents
prior for Mobilization.
Review/evaluation of Electrical plans for the buildings like power & lighting drawing, main feeders &
3. Page - 3 - of 4
sub-feeders drawings, lightning protection and grounding drawings and others.
Review of Project specifications, Design drawings and Vendor drawings.
Responsible for the technical support of Instrumentation panels, Field instruments, PLC (GE- Fanuc,
VersaMax), SCADA (Ifix-Proficy), Fire Alarm, Fire Fighting equipment’s.
Receive / action Request(s) for Information (RFIs) that apply to electrical works. RFIs requiring design
feedback direct to the Designer for response. Review responses for adequacy.
Review Contractor’s electrical change order proposals.
Prepare SPIR (Spare Parts Interchangeability Records) documents for client approval, procure the
materials accordingly and hand over to client as well as End-User.
Prepare recommendations for the Design Team Leader for review.
Assist in negotiations with contractors regarding changes in contract value or project duration.
Review contractors’ claims related to electrical works.
Prepare recommendations for claims approval or rejection.
Coordinate with client and End-user for receiving Mechanical certificates after all installation as
completed.
Identify and resolve interface and desig n/construction issues during the engineering, construction and
handover phases of the project.
Assist in negotiations with contractors regarding the value of claims or changes in schedules.
Approve the Contractors’ as- built drawings and O&M manual submittals.
Development of pre-commissioning and commissioning strategy, plan and procedures for the
project facilities all along the various stages of the project.
Review the material status and coordinate with the material Engineer / Procurement for ensuring the
material availability and its tracking.
Daily review of site progress to ensure that all the problems are tackled effectively and the
work progress is as per schedule.
Support the established Risk Management process in order to ensure successful and timely completion
of the project.
Permits coordination to close out ATPs.
Responsible for punch clearance, close out and inviting client QP as well as end -user MIC for
final closeout inspection.
Responsible for the equipments as well as for plant final hand-over certification receives from End-
user.
4. Page - 4 - of 4
INDIAN ASSIGNMENTS
Zigbee Based Temperature Measurement and Control Using LabVIEW
CONSULTANTS
KEO, Maunsell consultancy services ltd.
PROFESSIONAL DEVELOPMENT
Bachelor of Engineering (May 2011) – “Expert Electronics & Instrumentation Engineering” – From
AnnaUniversity – Mahendra Engineering College, Tamil Nadu, India.
Conducted training for Programmable Logic Controller Allen Bradley Micro Logix 1200 Series
C,Siemens S7-200, GE Fanuc Versamax, ModiconTwido, Modicon M 340.
Conducted training for Supervisory Control & Data Acquisition Systems: Wonderware Intouch V 10.0,
GE Fanuc Ifix V 5.0 Schneider Citect 7.1, Factroytalk View.
Conducted training and expertise for Human Machine Interface: Telemecanique Magelis XBT-GT
(Touchscreen), XBT-N.
Proficiency in MS Project 2007, MS Office 2010, 2013.
Successfully handed over the Sewage Treatment Plant (Qatar Petroleum Project) to client after
Construction, Installation, Testing, Commissioning and maintenance.
Declaration: I do here by declare that the information furnished above is true and correct to the best of my
knowledge
Mohammed Zameel Zainudheen