TrustArc Webinar - Unified Trust Center for Privacy, Security, Compliance, an...
6.2.3 Revision Rrd Skk With Edge Protection
1. 6.2 ACCESS DOORS circular/oval
6.2
ACCESS DOORS
Oval access doors for rectangular and oval air duct systems
6.2.3 REVISION RRD - SKK with edge protection
- Access door lid with self-adhesive edge protection and polyamide locking levers
- Edge protection to be inserted onto the duct wall
- Providing protection against damage and acting as a sealant
- Access doors installed as per requirements are air tight against
a maximum air-pressure of 5.000 Pa
- Heat resistant -70°C till +70°C
- Not resistant against oil and fat
ACCESS DOOR RRD 18 SKK
Art.-Nr. Material* Incision Installation di- Pipe Ø VPE Weight
mm mensions mm min. - Stand. - max. units kg/unit
630/071 K Galv. steel 180 x 80 130 68 - 971 - 75 1 0,320
630/080 K Galv. steel 180 x 80 130 76 - 980 - 85 1 0,320
630/090 K Galv. steel 180 x 80 130 86 - 990 - 95 1 0,320
630/100 K Galv. steel 180 x 80 130 96 - 100 - 105 1 0,320
630/112 K Galv. steel 180 x 80 130 106 - 112 - 120 1 0,320
630/125 K Galv. steel 180 x 80 130 121 - 125 - 130 1 0,320
630/140 K Galv. steel 180 x 80 130 131 - 140 - 150 1 0,320
630/160 K Galv. steel 180 x 80 130 151 - 160 - 170 1 0,320
ACCESS DOOR RRD 21 SKK
Art.-Nr. Material* Incision Installation di- Pipe Ø VPE Weight
mm mensions mm min. - Stand. - max. units kg/unit
631/140 K Galv. steel 200 x 100 150 130 - 140/150 - 155 1 0,360
631/160 K Galv. steel 200 x 100 150 156 - 160/180 - 190 1 0,360
631/200 K Galv. steel 200 x 100 150 191 - 200/224 - 240 1 0,360
631/250 K Galv. steel 200 x 100 150 241 - 250/280 - 300 1 0,360
631/315 K Galv. steel 200 x 100 150 301 - 315/355 - 360 1 0,360
ACCESS DOOR RRD 32 SKK
Art.-Nr. Material* Incision Installation di- Pipe Ø VPE Weight
mm mensions mm min. - Stand. - max. units kg/unit
632/280 K Galv. steel 300 x 200 250 260 - 280 - 300 1 1,030
632/315 K Galv. steel 300 x 200 250 301 - 315 - 340 1 1,030
632/355 K Galv. steel 300 x 200 250 341 - 355 - 380 1 1,030
632/400 K Galv. steel 300 x 200 250 381 - 400 - 420 1 1,030
632/450 K Galv. steel 300 x 200 250 421 - 450 - 470 1 1,030
All Rights Reserved
632/500 K Galv. steel 300 x 200 250 471 - 500 - 530 1 1,030
* On request available in stainless steel (Art.-Nr. + E) and aluminium (Art.-Nr. + A)
2. 6.2 ACCESS DOORS circular/oval
6.2
ACCESS DOORS
6.2.3 ACCESS DOORS RRD - SKK with edge protection
ACCESS DOOR RRD 43 SKK
Art.-Nr. Material* Incision Installation di- Pipe Ø VPE Weight
mm mensions mm min. - Stand. - max. units kg/unit
633/400 K Galv. steel 400 x 300 350 370 - 400 - 420 1 2,030
633/450 K Galv. steel 400 x 300 350 421 - 450 - 470 1 2,030
633/500 K Galv. steel 400 x 300 350 471 - 500 - 530 1 2,030
633/560 K Galv. steel 400 x 300 350 531 - 560 - 600 1 2,030
633/630 K Galv. steel 400 x 300 350 601 - 630 - 670 1 2,030
633/710 K Galv. steel 400 x 300 350 671 - 710 - 750 1 2,030
633/800 K Galv. steel 400 x 300 350 751 - 800 - 850 1 2,030
633/900 K Galv. steel 400 x 300 350 851 - 900 - 950 1 2,030
ACCESS DOOR RRD 54 SKK
Art.-Nr. Material* Incision Installation di- Pipe Ø VPE Weight
mm mensions mm min. - Stand. - max. units kg/unit
634/0560 K Galv. steel 500 x 400 450 0520 -0560 - 600 1 4,000
634/0630 K Galv. steel 500 x 400 450 0601 - 630 - 670 1 4,000
634/0710 K Galv. steel 500 x 400 450 0671 - 710 - 750 1 4,000
634/0800 K Galv. steel 500 x 400 450 0751 - 800 - 850 1 4,000
634/0900 K Galv. steel 500 x 400 450 0851 - 900 -0 950 1 4,000
634/1000 K Galv. steel 500 x 400 450 0951 - 1000 - 1060 1 4,000
634/1120 K Galv. steel 500 x 400 450 1061 - 1120 - 1180 1 4,000
634/1250 K Galv. steel 500 x 400 450 1181 - 1250 - 1320 1 4,000
634/1400 K Galv. steel 500 x 400 450 1321 - 1400 - 1500 1 4,000
634/1600 K Galv. steel 500 x 400 450 1501 - 1600 - 1800 1 4,000
* On request available in stainless steel (Art.-Nr. + E) and aluminium (Art.-Nr. + A)
Tips:
- As per DIN 24145 the curvature of the RRD-Access doors is equivalent to the Ø
of the folded spiral-seam pipes
- Minimum width for all RRD-Access doors: Access doors incision + 50 mm
- For Pipes with intermediate dimensions one chooses the pipe access door lid with
the closest standard diameter. A limited variance in the diameter can be easily
accommodated by the thin walled pipes.
6.3.1 ACCESSORIES FOR ACCESS DOOR LID
Art.-Nr. Designation Material VPE Weight kg
All Rights Reserved
/m/unit
656 Arresting cable Steel 10 units 0,240
655 Edge protection Cellular rubber - Elastomer m 0,070