A tablet press is a mechanical device that compresses powder into tablets of uniform size and weight. A press can be used to manufacture tablets of a wide variety of materials, including pharmaceuticals, illicit drugs such as MDMA, cleaning products, and cosmetics. To form a tablet, the granulated material must be metered into a cavity formed by two punches and a die, and then the punches must be pressed together with great force to fuse the material together.[1] A tablet is formed by the combined pressing action of two punches and a die. In the first step of a typical operation, the bottom punch is lowered in the die creating a cavity into which the granulated feedstock is fed. The exact depth of the lower punch can be precisely controlled to meter the amount of powder that fills the cavity. The excess is scraped from the top of the die, and the lower punch is drawn down and temporarily covered to prevent spillage. Then, the upper punch is brought down into contact with the powder as the cover is removed. The force of compression is delivered by high pressure compression rolls which fuse the granulated material together into a hard tablet. After compression, the lower punch is raised to eject the tablet

1. Presentation
For
Industrial Training

2. COSMAS PHARMACALS PVT. LTD.
B-1/1446/10-B, Y- BLOCK CROSSING ,HAMBRAN ROAD, LUDHIANA – 141001 (PUNJAB).
A - PPT FILE
PRESENTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE AWARD OF
THE DEGREE OF
BACHELOR OF PHARMACY
PRESENTED TO
PUNJAB TECHNICAL UNIVERSITY, JALANDHAR
PRESENTED BY .
Name of Student University Roll No.
JATIN SINGLA 1215439
(1st June, 2015 to 1st JuLy, 2015.)
(Duration of Training period)
INDO SOVIET FRIENDSHIP COLLEGE OF PHARMACY , MOGA

3. CONTENTS:-
• HISTORY OF INDUSTRY.
• INTRODUCTION
• PRODUCTS
• PRODUCTION PROCESS
• EVALUATION
• PACKAGING
• TESTING

4. HISTORY OF INDUSTRY.
Cosmas Group of Companies was established in 1994 as a humble
drug formulation unit at Ludhiana, the industrial hub of Punjab
(India). Today, it has two companies dedicated to providing high
quality pharmaceutical products under its hood.
Cosmas is engaged in manufacturing and marketing Pharmaceutical
and Health Care products. With a network of organized tie-ups for
a wide array of close to 450 products, Cosmas is growing leaps and
bounds today. Cosmas is known as a quality conscious and
conscientious drug manufacturer of India and comes as an ideal
partner for Contract Manufacturing of quality pharma products.

5. INTRODUCTION :-
Cosmas is engaged in manufacturing and marketing
Pharmaceutical and Health Care products. With a network of
organized tie-ups for a wide array of close to 450 products
. TABLETS
. DRY SYRUPS
. CAPSULES

6. PRODUCTS:- (TABLETS )
CEFADROXIL
1 Cefadroxil 125mg(DT) 10X10 Blister Pack
2 Cefadroxil 250mg 10X10 Blister Pack
CEFDINIR
1 Cefdinir 300mg. Tab. 10X10 Alu-Alu Pack
2 Cefdinir 100mg.(DT) 10X10 Alu-Alu Pack
CEFACLOR
1 Cefaclor 250mg. 10X10 Blister Pack
2 Cefaclor 125mg. 10X10 Blister Pack
CEFETAMET
1 Cefetamet 250mg 10X10 Blister Pack
CEFPROZIL
1 Cefprozil 250mg 10X10 Blister Pack

7. CAPSULES:-
CEFADROXIL
1 Cefadroxil 250mg 10X10 Blister Pack
2 Cefadroxil 500mg 10X10 Blister Pack
CEFACLOR
1 Cefaclor 250mg. 10X10 Blister Pack
2 Cefaclor 500 mg 10X10 Blister Pack
CEPHALEXIN
1 Cephalexin 250 mg caps. 10X10 Blister Pack
2 Cephalexin 500 mg Caps. 10X10 Blister Pack
CEFDINIR
1 Cefdinir 300mg. Caps. 10X10 Alu-Alu Pack

8. DRY SYRUPS:-
Cephalexin
1 Cephalexin 125mg. / 5ml 60 ml
2 Cephalexin 125mg. / 5ml 30 ml
Cefuroxime
1
Cefuroxime Axetil
125mg/5ML
30 ml
Cefetamet
1
Cefetamet Pivoxil HCl.(Oral)
250mg/ml.
30 ml
Cefprozil
1
Cefprozil Powder(Oral)
125mg/5 ml.
30 ml

9. PRODUCTION PROCESS :-
. RAW MATERIAL
. DRYING
. BLENDING
. COMPRESSION
. COATING

10. RAW MATERIAL

11. DRYING :-
Fluidized bed drying technologies that
enables drying of powder particles where
the residual moisture content is higher
than desired.

12. BLENDING :-
( for proper mixing of
Excepients,etc )

13. COMPRESSION :-
Compression section had a multiple
punching machine
that had capacity of producing more
than 40,000 tablets/day.

14. COATING :-
A coating is a covering that is applied to
the surface of an object, usually referred
to as the substrate. The purpose of
applying the coating may be decorative,
functional, or both. The coating itself
may be an all-over coating, completely
covering the substrate.

15. EVALUATION :-

16. PACKAGING :-
ALU-ALU MACHINE BLISTER MACHINE

17. TESTING :-

18. Thanks……
JATIN
SINGLA