Himes machinery robotic welding cell machine features and models
•Download as PPT, PDF•
3 likes•1,793 views
Himes machinery offer OTC/Daihen 6-axis robotic welding cell new: 8 / 2007 with below mentioned specification:
Report
Share
Report
Share
Recommended
Cantilevered Shaft Reeling & Coiling Take-Up Machine| ReelpowerWC
Cantilevered Shaft Reeling & Coiling Take up Machine has 1 hp variable speed and includes manual hydraulic lift system.
https://www.reelpowerwc.com/mrtu-cantilevered-shaft-reeling-coiling-take-up-m-c.html
Evaluation circuit of hex inverters
This document summarizes the evaluation of a SN74AC04N hex inverter integrated circuit by providing its truth table, input and output voltage levels, and propagation delay times. Specifically, it shows that the chip operates with a high input voltage of 5.5V and a low input voltage of 0V, and it has a high output voltage of 4.5V and a low output voltage of 0.5V. It also measures the propagation delay time between a change in the input and output signals to be 0.5 microseconds.
Horizontal / Pallet Decoiler
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
RunnTech F200 Series Hall Sensor Accelerator Pedal
RunnTech F200 Series Accelerator Foot Pedal is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and mainly used in hydraulic proportional control and electronic throttle control systems.
Aevr ga
This document summarizes an AEVR multi-functional digital voltage controller. It detects over voltage, under voltage, phase loss, and phase imbalance. It has adjustable tripping delays from 0.1 to 10 seconds and fixed delays of 2 to 3 seconds. It can detect voltages from 85% to 110% of the rated operating voltage and has reset times of 1 or 5 seconds. It is available in P, H, and L types for different voltage ranges and comes in single and three phase models for wiring configurations.
Servotek data sheetst_7565_specsheet
This document describes a low-cost bearingless DC tachometer generator that provides speed measurement. It has a threaded #10-32 shaft that mounts directly to a motor shaft without additional couplings or kits. It offers outputs between 1-24 volts per 1000 RPM with linearity of 0.1% up to 4000 RPM. Other features include bidirectional output, temperature stability, and simple two-wire sensing of the analog voltage output. The product provides a low-cost solution for measuring and controlling motor speed.
Veichi ac70 sensorless vector control inverter
The document profiles the Veichi AC70 Sensorless Vector Control Inverter. It notes that the inverter has excellent quality and performance across various application areas. It uses a compact, durable design that can handle different load conditions. The inverter features advanced control algorithms to satisfy different application needs. Its main applications include use in machine tools and textile industries.
Wtau Crane safety devices list
Weite Technologies Co. Ltd protect cranes and lifting equipment under safety working condition with WTAU Load Moment Indicator(LMI), Safe Monitoring System, overload limiter, load cell, anemometers, A2B.etc. "The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong(Top 9), Asiagroup(Top 45), Big Crane(Top 90) and Fortune 500 corps". For more, pls refer to http://www.weite.tech.
Recommended
Cantilevered Shaft Reeling & Coiling Take-Up Machine| ReelpowerWC
Cantilevered Shaft Reeling & Coiling Take up Machine has 1 hp variable speed and includes manual hydraulic lift system.
https://www.reelpowerwc.com/mrtu-cantilevered-shaft-reeling-coiling-take-up-m-c.html
Evaluation circuit of hex inverters
This document summarizes the evaluation of a SN74AC04N hex inverter integrated circuit by providing its truth table, input and output voltage levels, and propagation delay times. Specifically, it shows that the chip operates with a high input voltage of 5.5V and a low input voltage of 0V, and it has a high output voltage of 4.5V and a low output voltage of 0.5V. It also measures the propagation delay time between a change in the input and output signals to be 0.5 microseconds.
Horizontal / Pallet Decoiler
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
RunnTech F200 Series Hall Sensor Accelerator Pedal
RunnTech F200 Series Accelerator Foot Pedal is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and mainly used in hydraulic proportional control and electronic throttle control systems.
Aevr ga
This document summarizes an AEVR multi-functional digital voltage controller. It detects over voltage, under voltage, phase loss, and phase imbalance. It has adjustable tripping delays from 0.1 to 10 seconds and fixed delays of 2 to 3 seconds. It can detect voltages from 85% to 110% of the rated operating voltage and has reset times of 1 or 5 seconds. It is available in P, H, and L types for different voltage ranges and comes in single and three phase models for wiring configurations.
Servotek data sheetst_7565_specsheet
This document describes a low-cost bearingless DC tachometer generator that provides speed measurement. It has a threaded #10-32 shaft that mounts directly to a motor shaft without additional couplings or kits. It offers outputs between 1-24 volts per 1000 RPM with linearity of 0.1% up to 4000 RPM. Other features include bidirectional output, temperature stability, and simple two-wire sensing of the analog voltage output. The product provides a low-cost solution for measuring and controlling motor speed.
Veichi ac70 sensorless vector control inverter
The document profiles the Veichi AC70 Sensorless Vector Control Inverter. It notes that the inverter has excellent quality and performance across various application areas. It uses a compact, durable design that can handle different load conditions. The inverter features advanced control algorithms to satisfy different application needs. Its main applications include use in machine tools and textile industries.
Wtau Crane safety devices list
Weite Technologies Co. Ltd protect cranes and lifting equipment under safety working condition with WTAU Load Moment Indicator(LMI), Safe Monitoring System, overload limiter, load cell, anemometers, A2B.etc. "The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong(Top 9), Asiagroup(Top 45), Big Crane(Top 90) and Fortune 500 corps". For more, pls refer to http://www.weite.tech.
Wtau safe load indicator system for crawler crane
Weite Technologies Co. Ltd protect cranes and lifting equipment under safety working condition with WTAU Load Moment Indicator(LMI), Safe Monitoring System, overload limiter, load cell, anemometers, A2B.etc. "The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong(Top 9), Asiagroup(Top 45), Big Crane(Top 90) and Fortune 500 corps". For more, pls refer to http://www.weite.tech.
STM-R Integrated Step Motor
The STM-R integrated step motor from Applied Motion Products is a low cost, easy to use positioning device that's available in NEMA sizes 17 and 23. It;s a perfect way to get precision motion using a PLC or low cost controller like Arduino or Raspberry Pi.
sujesh
The document discusses steps taken to improve power quality from the incoming electricity supply. It includes:
1) Installing an HT AVR to regulate the voltage variation within ±1%.
2) Installing UPS systems to reduce losses during power outages.
3) Upgrading the voltage from 11kV to 33kV to improve stability.
Problems before these changes included machine failures and breaker tripping due to low and fluctuating voltage. The AVR installation stabilized the voltage and avoided these issues. Upgrading the voltage capacity and UPS systems further improved power reliability.
Sx460 avr newage_stamford
The document provides information on the SX460 Automatic Voltage Regulator (AVR) including:
1) The AVR is used to regulate generator voltage and includes under-speed and loss of sensing protection. It controls power to the exciter field to maintain output voltage.
2) The AVR samples generator output voltage and uses feedback to control power to the exciter field, compensating for loads and maintaining voltage.
3) It provides under-frequency protection by reducing output voltage proportionally below a preset threshold based on generator speed.
Axle load sensors from JSC Mechatronics. Installation
The document discusses Eurosens axle load sensors for measuring air pressure in vehicle air springs or suspension. It provides details on installation, electrical connection, calibration and operation of Eurosens Difference 01 and leaf spring sensors. The sensors measure air pressure or suspension deflection to determine axle load and output a stabilized voltage signal. Installation requires analysis of vehicle design and mounting the sensor to the air spring, air line, or suspension lever arm.
Axle load sensor DDE08 - weight control on transport
Presentation on axle load sensors for vehicles with air suspension. Suitable for all types of vehicles - buses, trucks, heavy machines. Designed to fit into any GPS tracking solution. Safe and easy installation. Sensor's manufacturer - Technoton. Official EU distributor: Wagencontrol, Czech Republic. www.wagencontrol.eu
Business side:
Weight control can be extremely important for specific customers. Usually, they turn their eyes to GPS tracking companies for a solution. Wagencontrol, as a supplier of telematics sensors for GPS tracking providers, got such solution.
Who are the end-users?
First of all, they are the companies, that transport unknown in advance amounts of cargo, like in row wood industry. To prevent overload, they usually have stationary weighting station to detect the load. Otherwise, they can damage the roads, and so be a subjects to a huge fines, and damage the equipment. Municipal services, like waist collectors, never know what is really inside in KG, and fleet owners got no idea, was indicated stop on the GPS tracking service just a stop or was it unpaid loading? The same works perfectly for all other machines - public buses, logistics trucks, construction vehicles.
Veichi Variable Frequency Drives
The document shows Veichi variable frequency drives and its great features. Veichi provides quality VFDs at wholesale price. More info: http://www.veichi.org/variable-frequency-drives.html.
Wtau safe load system indicator catalog for port and shipbuilding
Weite Technologies Co. Ltd protect cranes and lifting equipment under safety working condition with WTAU Load Moment Indicator(LMI), Safe Monitoring System, overload limiter, load cell, anemometers, A2B.etc. "The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong(Top 9), Asiagroup(Top 45), Big Crane(Top 90) and Fortune 500 corps". For more, pls refer to http://www.weite.tech.
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
Robot arm control through human hand motion
In this project is based on PIC 16F877A microcontroller. Human hand’s five motions are interpreted and that signals respectively robotic arm moved, its signals are transferred through wireless by using RF module. It is first stage for humanoid robot.
RF controlled robot or wireless robot
There is a presentation on FR controlled robot or we can say wireless robot can move forward , backward , left and right .
Smart WiFi Socket
This document provides information and instructions for an indoor remote power socket with a wireless remote control that has a range of 100 feet. It details the technical specifications, instructions for use, FCC compliance information, battery replacement instructions, and safety warnings. The socket can be controlled remotely to turn outlets on and off and has a rating of 125VAC/60Hz/8A/1000W for resistive and tungsten loads. The remote control uses one CR2032 lithium battery.
Hwacheon Flyer
This document advertises two machines for sale: a Hi-Tech 200 lathe from 2004 with 2 axes, a maximum turning diameter of 8.3-14 inches, 12 tool stations, and 1 20HP spindle; and a Hi-Tech 100B lathe from 2004 with live tooling, a maximum turning diameter of 11.8 inches, 12 tool turret, and an included automatic bar loader.
Top tips for you to maintenance your new replacement uniwill m30 3 s4400-g1p1...
The document describes a UNIWILL M30-3S4400-G1P1 4400mAh 11.1V Li-ion laptop battery. It provides details on the battery such as its voltage, capacity, brand, and dimensions. It states the battery is compatible with several Uniwill and Averatec laptop models. The document also provides tips on maintaining the battery such as fully charging and discharging it occasionally and not exposing it to moisture or dropping it.
Controller options
The document discusses different controller options for fans, including:
1. EC fan controllers for fans with 0-10V inputs that control temperature between 20-40°C or 35-55°C with alarm outputs.
2. DCP fan controllers for compact fans with PWM input that also control temperature between 20-40°C or 35-55°C and come in 12, 24, and 48V options.
3. DC fan controllers for compact fans with 2/3 wires that control 1-17W fans between 20-40°C or 35-55°C temperature ranges and come in 12, 24, and 48V options.
Controller options
The document discusses different controller options for fans, including controllers for EC fans with 0-10V input, compact fans with PWM input, and compact fans with 2/3 wires and no control input. It provides part numbers and specifications for each type of controller, including temperature control ranges, voltage options, and alarm output types. Upcoming controller options are also mentioned, such as a DCP fan controller that allows PLCs to control compact fans and various manual control options for EC fans with 0-10V inputs.
RF Controlled Robotic Vehicle With Laser Beam Arrangement
Project is used to control the robotic vehicle using RF remote operation. Low power laser beam light is interfaced with microcontroller for desired operation
Raspberry pi Part 17
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Inverter training-slv delta
The document provides an overview of inverter training, specifically describing how an inverter works using V/F control and sensor-less vector control methods to control the speed of an induction motor. It includes diagrams and explanations of how the inverter generates PWM output signals, the V/F control method which aims to maintain a stable magnetizing flux, and how torque boost is used for compensation at low frequencies. Finally, it outlines the advantages of sensor-less vector control for applications requiring high torque at low speeds.
Step by step guide to implement your robotic welding cell
http://blog.robotiq.com/robotic-welding-integration-step-by-step-guide
This document has been put together to help you with your robotic welding integration. It explain the points you
should pass through before buying a robotic welding cell. With different aspects and hints, as well as a checklist
is also provided, you can write down your information and compare your different scenarios. Take this advice
seriously and it can save you time and energy in your integration.
Welding automation ppt
Arcraft provides automated welding systems to improve welding quality and productivity while reducing costs. Their equipment includes welding oscillators, positioners, guns, columns, booms, cross slides, lathes, turntables, wire feeders, seam trackers, and tank rotators. These systems automate welding to enhance the working environment. Features include precision mechanisms, enclosure, controllability, stroke control, and duplication elimination. The document provides details on various automation equipment and their advantages in improving welding processes.
ROBOTIC WELDING Presentation to show2
Prateek Sood completed an industrial training at VEEGEE KAUSHICKO ENGINEERING PVT. LTD. The training focused on learning about robotic welding through teaching programming, installations, cell design, and hands-on work. During the training, Prateek learned robotic functionality, welding machine basics, robot teaching, PLC programming, and production calculations. The training helped develop practical skills and confidence needed to work in the robotics and manufacturing field.
More Related Content
What's hot
Wtau safe load indicator system for crawler crane
Weite Technologies Co. Ltd protect cranes and lifting equipment under safety working condition with WTAU Load Moment Indicator(LMI), Safe Monitoring System, overload limiter, load cell, anemometers, A2B.etc. "The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong(Top 9), Asiagroup(Top 45), Big Crane(Top 90) and Fortune 500 corps". For more, pls refer to http://www.weite.tech.
STM-R Integrated Step Motor
The STM-R integrated step motor from Applied Motion Products is a low cost, easy to use positioning device that's available in NEMA sizes 17 and 23. It;s a perfect way to get precision motion using a PLC or low cost controller like Arduino or Raspberry Pi.
sujesh
The document discusses steps taken to improve power quality from the incoming electricity supply. It includes:
1) Installing an HT AVR to regulate the voltage variation within ±1%.
2) Installing UPS systems to reduce losses during power outages.
3) Upgrading the voltage from 11kV to 33kV to improve stability.
Problems before these changes included machine failures and breaker tripping due to low and fluctuating voltage. The AVR installation stabilized the voltage and avoided these issues. Upgrading the voltage capacity and UPS systems further improved power reliability.
Sx460 avr newage_stamford
The document provides information on the SX460 Automatic Voltage Regulator (AVR) including:
1) The AVR is used to regulate generator voltage and includes under-speed and loss of sensing protection. It controls power to the exciter field to maintain output voltage.
2) The AVR samples generator output voltage and uses feedback to control power to the exciter field, compensating for loads and maintaining voltage.
3) It provides under-frequency protection by reducing output voltage proportionally below a preset threshold based on generator speed.
Axle load sensors from JSC Mechatronics. Installation
The document discusses Eurosens axle load sensors for measuring air pressure in vehicle air springs or suspension. It provides details on installation, electrical connection, calibration and operation of Eurosens Difference 01 and leaf spring sensors. The sensors measure air pressure or suspension deflection to determine axle load and output a stabilized voltage signal. Installation requires analysis of vehicle design and mounting the sensor to the air spring, air line, or suspension lever arm.
Axle load sensor DDE08 - weight control on transport
Presentation on axle load sensors for vehicles with air suspension. Suitable for all types of vehicles - buses, trucks, heavy machines. Designed to fit into any GPS tracking solution. Safe and easy installation. Sensor's manufacturer - Technoton. Official EU distributor: Wagencontrol, Czech Republic. www.wagencontrol.eu
Business side:
Weight control can be extremely important for specific customers. Usually, they turn their eyes to GPS tracking companies for a solution. Wagencontrol, as a supplier of telematics sensors for GPS tracking providers, got such solution.
Who are the end-users?
First of all, they are the companies, that transport unknown in advance amounts of cargo, like in row wood industry. To prevent overload, they usually have stationary weighting station to detect the load. Otherwise, they can damage the roads, and so be a subjects to a huge fines, and damage the equipment. Municipal services, like waist collectors, never know what is really inside in KG, and fleet owners got no idea, was indicated stop on the GPS tracking service just a stop or was it unpaid loading? The same works perfectly for all other machines - public buses, logistics trucks, construction vehicles.
Veichi Variable Frequency Drives
The document shows Veichi variable frequency drives and its great features. Veichi provides quality VFDs at wholesale price. More info: http://www.veichi.org/variable-frequency-drives.html.
Wtau safe load system indicator catalog for port and shipbuilding
Weite Technologies Co. Ltd protect cranes and lifting equipment under safety working condition with WTAU Load Moment Indicator(LMI), Safe Monitoring System, overload limiter, load cell, anemometers, A2B.etc. "The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong(Top 9), Asiagroup(Top 45), Big Crane(Top 90) and Fortune 500 corps". For more, pls refer to http://www.weite.tech.
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
Robot arm control through human hand motion
In this project is based on PIC 16F877A microcontroller. Human hand’s five motions are interpreted and that signals respectively robotic arm moved, its signals are transferred through wireless by using RF module. It is first stage for humanoid robot.
RF controlled robot or wireless robot
There is a presentation on FR controlled robot or we can say wireless robot can move forward , backward , left and right .
Smart WiFi Socket
This document provides information and instructions for an indoor remote power socket with a wireless remote control that has a range of 100 feet. It details the technical specifications, instructions for use, FCC compliance information, battery replacement instructions, and safety warnings. The socket can be controlled remotely to turn outlets on and off and has a rating of 125VAC/60Hz/8A/1000W for resistive and tungsten loads. The remote control uses one CR2032 lithium battery.
Hwacheon Flyer
This document advertises two machines for sale: a Hi-Tech 200 lathe from 2004 with 2 axes, a maximum turning diameter of 8.3-14 inches, 12 tool stations, and 1 20HP spindle; and a Hi-Tech 100B lathe from 2004 with live tooling, a maximum turning diameter of 11.8 inches, 12 tool turret, and an included automatic bar loader.
Top tips for you to maintenance your new replacement uniwill m30 3 s4400-g1p1...
The document describes a UNIWILL M30-3S4400-G1P1 4400mAh 11.1V Li-ion laptop battery. It provides details on the battery such as its voltage, capacity, brand, and dimensions. It states the battery is compatible with several Uniwill and Averatec laptop models. The document also provides tips on maintaining the battery such as fully charging and discharging it occasionally and not exposing it to moisture or dropping it.
Controller options
The document discusses different controller options for fans, including:
1. EC fan controllers for fans with 0-10V inputs that control temperature between 20-40°C or 35-55°C with alarm outputs.
2. DCP fan controllers for compact fans with PWM input that also control temperature between 20-40°C or 35-55°C and come in 12, 24, and 48V options.
3. DC fan controllers for compact fans with 2/3 wires that control 1-17W fans between 20-40°C or 35-55°C temperature ranges and come in 12, 24, and 48V options.
Controller options
The document discusses different controller options for fans, including controllers for EC fans with 0-10V input, compact fans with PWM input, and compact fans with 2/3 wires and no control input. It provides part numbers and specifications for each type of controller, including temperature control ranges, voltage options, and alarm output types. Upcoming controller options are also mentioned, such as a DCP fan controller that allows PLCs to control compact fans and various manual control options for EC fans with 0-10V inputs.
RF Controlled Robotic Vehicle With Laser Beam Arrangement
Project is used to control the robotic vehicle using RF remote operation. Low power laser beam light is interfaced with microcontroller for desired operation
Raspberry pi Part 17
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Inverter training-slv delta
The document provides an overview of inverter training, specifically describing how an inverter works using V/F control and sensor-less vector control methods to control the speed of an induction motor. It includes diagrams and explanations of how the inverter generates PWM output signals, the V/F control method which aims to maintain a stable magnetizing flux, and how torque boost is used for compensation at low frequencies. Finally, it outlines the advantages of sensor-less vector control for applications requiring high torque at low speeds.
What's hot (19)
Axle load sensors from JSC Mechatronics. Installation
Axle load sensors from JSC Mechatronics. Installation
Axle load sensor DDE08 - weight control on transport
Axle load sensor DDE08 - weight control on transport
Wtau safe load system indicator catalog for port and shipbuilding
Wtau safe load system indicator catalog for port and shipbuilding
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Series Proportional Accelerator Pedal
Top tips for you to maintenance your new replacement uniwill m30 3 s4400-g1p1...
Top tips for you to maintenance your new replacement uniwill m30 3 s4400-g1p1...
RF Controlled Robotic Vehicle With Laser Beam Arrangement
RF Controlled Robotic Vehicle With Laser Beam Arrangement
Viewers also liked
Step by step guide to implement your robotic welding cell
http://blog.robotiq.com/robotic-welding-integration-step-by-step-guide
This document has been put together to help you with your robotic welding integration. It explain the points you
should pass through before buying a robotic welding cell. With different aspects and hints, as well as a checklist
is also provided, you can write down your information and compare your different scenarios. Take this advice
seriously and it can save you time and energy in your integration.
Welding automation ppt
Arcraft provides automated welding systems to improve welding quality and productivity while reducing costs. Their equipment includes welding oscillators, positioners, guns, columns, booms, cross slides, lathes, turntables, wire feeders, seam trackers, and tank rotators. These systems automate welding to enhance the working environment. Features include precision mechanisms, enclosure, controllability, stroke control, and duplication elimination. The document provides details on various automation equipment and their advantages in improving welding processes.
ROBOTIC WELDING Presentation to show2
Prateek Sood completed an industrial training at VEEGEE KAUSHICKO ENGINEERING PVT. LTD. The training focused on learning about robotic welding through teaching programming, installations, cell design, and hands-on work. During the training, Prateek learned robotic functionality, welding machine basics, robot teaching, PLC programming, and production calculations. The training helped develop practical skills and confidence needed to work in the robotics and manufacturing field.
Hemi engine
The document discusses the design objectives and history of the hemispherical or "HEMI" engine. Key points include:
- HEMI engines aim to maximize power extraction from each combustion stroke by burning all fuel, having maximum cylinder pressure occur at the optimal crankshaft angle, and minimizing losses.
- Chrysler introduced the HEMI design in the 1950s to increase power without higher compression ratios. It provided better airflow and efficiency than flathead designs.
- Advantages of HEMI engines include smaller combustion chamber surface area, more room for larger intake/exhaust valves, and centrally-located spark plugs. However, disadvantages include sensitivity to fuel octane and inability to use more
Presentation on Automation in Welding
The document discusses various types of automation in welding processes including manual, semi-automatic, automatic, automated, remote, and robotic welding. It describes the key stages in a welding operation sequence and provides examples of different techniques used for automation in welding applications from the 1920s to present day. Specific automation techniques are highlighted for different welding processes based on factors like production volume and part geometry.
Micromachining
Micro machining involves removing material at the micro/nano scale to create small features and high precision surfaces. Key techniques include photolithography, which uses light passing through masks to pattern photoresist, and various etching methods like wet, dry, and plasma etching to remove material. Other important microfabrication processes are bulk micromachining, which etches the silicon substrate, surface micromachining which builds structures in layers, and LIGA which uses X-rays to create high aspect ratio metal parts through electroplating. These micro machining techniques enable manufacturing of complex micro-scale parts for applications like MEMS devices and biomedical tools.
Viewers also liked (6)
Step by step guide to implement your robotic welding cell
Step by step guide to implement your robotic welding cell
Similar to Himes machinery robotic welding cell machine features and models
Applied motion products str datasheet
The document describes Applied Motion's STR series of stepper motor drives, including the STR2, STR4, and STR8 models. The drives can be configured using dip switches or rotary switches to select motor type, current settings, resolution, and other parameters. They provide constant current control, various protective features, and accept step and direction or CW/CCW pulse inputs. Specifications and performance curves for the drives with different stepper motors are also provided.
Sunny tripower 5000 -12000
The document describes the Sunny Tripower series of three-phase string inverters for photovoltaic systems. The Sunny Tripower offers maximum efficiency of up to 98.3%, flexible design options, easy installation and use, and communicative features. It is suitable for residential and small commercial PV installations from 5 kW to 12 kW.
VR-8 step voltage regulator
The document provides information on the VR-8 single phase voltage regulator from Farady Electric. It describes the regulator as a tap-changing autotransformer that can regulate distribution line voltages from 10% higher to 10% lower in 32 steps. It lists available voltage ratings from 2400V to 34500V for 50Hz and 60Hz systems. It also outlines standard features such as an SEL control box, tap changer motor, potential indicator, nameplates, and mounting provisions. Optional accessories and two controller box options - the SEL-2431 and ICMI UVR-1 - are also summarized.
F1016R 75L-150L jacketed systems
This document provides information on jacketed reactor systems from Ace Glass, including:
1. Base jacketed systems for 75L, 100L, and 150L reactors that include glass-lined vessels, heads, stirrers, and other components.
2. Details on the working temperature and pressure ranges, wetted materials, and motor mounting options.
3. Additional motor options that can be used with the systems, such as air motors, hazardous duty motors, and brushless motors.
Hygain_2014_Catalog.pdf
This document provides information on various antenna rotators and controllers from Hy-Gain. It describes the key specifications of the Tailtwister T2X and HDR-300A rotators, including their wind load capacity, turning power, brake power, and other technical details. It also provides ordering information and prices for the rotators, as well as for various digital controllers like the DCU-1, DCU-2, and DCU-3 that can be used with the rotators. Additional rotators and controllers described include the HAM-IV, AR-40, CD-45II, and replacement parts.
Fuji tu dong hoa renic ehvaccatalog-dienhathe.org
The document discusses Fuji Electric's new FRENIC-eHVAC AC drive for HVAC applications. It offers optimized energy savings for fans and pumps used in HVAC through appropriate flow rate and air flow adjustments. It has built-in EMC filters and other features for efficiency and maintenance like PID control, customizable logic, and communication protocols. The document provides specifications for the drive such as voltage and current ratings, cooling methods, and dimensions for various models.
Iai rcp4 w-ra_specsheet
1. The document introduces the ROBO Cylinder RCP4W-RA series of water-proof radial cylinders.
2. The RCP4W model features an IP67 rating, making it protected against dust and able to be submerged in water. It has a built-in linear guide to accommodate loads up to 100mm offset from the rod center.
3. The document provides specifications for various RCP4W models including strokes from 50-500mm, speeds up to 560mm/s, payloads up to 50kg, and options like cable exits, flanges and brackets.
A presentation on picanol omni plus 800
The document provides information on the Picanol Omni Plus 800 air jet weaving machine. It describes the machine specifications including a maximum speed of 850 rpm. It outlines the main parts of the machine such as the sumo motor, pre-winder, reed, and temples. It discusses the key motions including shedding, picking, and beat up. It provides details on the shedding mechanism and parameters. It also describes the pre-winder, nozzles, and air pressure used for weft insertion. The document summarizes the let-off, take up, and stop motions powered by servo motors. It concludes by listing the various motors used in the air jet loom.
Catalog inverter family Mitsubishi Electric-Beeteco.com
Catalog: Inverter Family, Inverter Mitsubishi
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Iai 05 rc general_cj0203-2_a_p371-416_gripper
The document provides specifications for the RCP2-GRSS ROBO Cylinder, which is a 2-finger gripper with a mini slider type actuator that has a width of 42mm and is powered by a pulse motor. It includes details about the applicable controllers, specifications such as stroke, gripping force, speed and cable length options. Dimensional drawings and CAD files are also available. The summary provides high-level technical details about the product in 3 sentences.
G5371
This document provides specifications for a Kohler 150REOZJF diesel generator set. It lists standard features such as one-source responsibility from Kohler, prototype and factory testing, UL2200 listing, load acceptance in one step, and NFPA110 compliance when equipped with accessories. It also details optional extended warranties. Technical specifications are provided for the alternator such as excitation system, insulation class, and temperature rise. Engine specifications include the John Deere model, fuel system, cooling system, lubrication system, and electrical system. Controller options are also summarized. Overall dimensions and wet weight are listed at the end.
Haydon kerk can_stack_actuators_catalog
This document provides product information on stepper motor linear actuators from Electromate. It includes specifications for various Can-Stack linear actuator series in different sizes, as well as information on part numbering, wiring, performance curves, and dimensional drawings. Electromate sells and services these stepper motor linear actuators.
Ametek mcg stepper_catalog
The document is a product catalog from MAE that provides specifications for various stepper motor models in different NEMA frame sizes, including sizes 17, 23, and 34. It offers hybrid stepper motors optimized for low inertia, balanced torque and inertia, or superior torque. The catalog provides detailed performance data, specifications, and customizable options for each motor model. It aims to provide accurate, reliable, and high-performance stepper motor solutions.
EAPL TIMER & CONTROLLER PRICE LIST wef 01-08-2022.pdf
The document provides a product catalog listing various timing relays, timers, and time switches along with their model numbers, descriptions, HSN codes, and unit prices. It includes on/off delay timers, interval timers, star-delta timers, cyclic timers, auxiliary relays, antipumping relays, digital timers, sequential timers, combination timers, and digital time switches. Product lines include A-series, B-series, ETR-series, H-series, C-series, and S-series timers with various voltage and timing range options. Key features of each product line or type of timer are also summarized.
Iai rcp4 w_specsheet
The document describes the RCP4W series of dust-proof/splash-proof slider-type robot cylinders. Key points:
- It achieves an IP65 level of dust-proof and splash-proof performance for the first time in a slider-type cylinder by positioning the base upside-down with the opening on the bottom.
- Models include the RCP4W-SA5C, SA6C, and SA7C, which have actuator widths of 55mm, 62mm, and 77mm respectively.
- Flexible installation options include wall mounting, ceiling mounting, and ability to install on any side of a table for increased configuration flexibility.
F1017R Support Stands
This document summarizes support stands and accessories for pilot-scale reactors from 10L to 150L sold by Ace Glass. The stands have an open frame design for maximum access and can support cylindrical or round-bottom flasks from 10L to 150L. The stands come with motor mounts or flange clamps and the materials are stainless steel or powder coated aluminum. Additional accessories include safety shields, shelves, and different sized clamps. The document also lists motor options for mounting to the stands including air motors, hazardous duty motors and controllers, and brushless DC motors.
Iai 08 rc general_cj0203-2_a_p493-522_dust-proof
This document provides specifications for the RCP4W ROBO Cylinder, a dust-proof/splash-proof linear actuator. It includes details on model numbers, dimensions, payload capabilities, installation requirements, and IP protection classes. The actuator uses a ball screw drive system and is available in slider and rod configurations with stroke lengths from 100-500mm. Accessories like mounting brackets and cable lengths are listed as optional configurations.
Manual tecnico de electrobisturi force
This document is a service manual for the Valleylab Force FX-8C Electrosurgical Generator. It provides instructions for servicing the generator, including safety information, descriptions of controls and indicators, technical specifications, principles of operation, setup and testing procedures, troubleshooting guides, replacement procedures, and a parts list. The manual is intended to guide technicians in servicing the generator.
Iai pcon abu_acon_abu_controller_specsheet
The document describes a simple absolute unit that can be attached to certain ACON/PCON controllers to allow them to function as absolute models without needing to home at power-up. It retains encoder data for up to 20 days. The unit is small, measuring 34mm x 100mm x 75.3mm, and can be used with compatible RCA and RCP series actuators. It requires a 24V power supply and includes a battery backup.
How to size_a_damper_actuator (1)
The document provides a 10-step method for selecting an actuator for damper retrofit applications. It includes tables to help determine the necessary actuator specifications based on the damper size, type, torque requirements, control inputs, and other application details. An example calculation is also provided to demonstrate how to size an actuator for a specific damper retrofit project.
Similar to Himes machinery robotic welding cell machine features and models (20)
Catalog inverter family Mitsubishi Electric-Beeteco.com
Catalog inverter family Mitsubishi Electric-Beeteco.com
EAPL TIMER & CONTROLLER PRICE LIST wef 01-08-2022.pdf
EAPL TIMER & CONTROLLER PRICE LIST wef 01-08-2022.pdf
Recently uploaded
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSCall8328958814 satta matka Kalyan result satta guessing
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Leaders who possess self-awareness deeply understand their emotions, strengths, and weaknesses.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
Maintaining a proper record of your money is important for any business whether it is small or large. It helps you stay one step ahead in the financial race and be aware of your earnings and any tax obligations.
However, managing finances without an entire accounting staff can be challenging for small businesses.
Accounting apps can help with that! They resemble your private money manager.
They organize all of your transactions automatically as soon as you link them to your corporate bank account. Additionally, they are compatible with your phone, allowing you to monitor your finances from anywhere. Cool, right?
Thus, we’ll be looking at several fantastic accounting apps in this blog that will help you develop your business and save time.
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Recently uploaded (20)
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Call8328958814 satta matka Kalyan result satta guessing
Call8328958814 satta matka Kalyan result satta guessing
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Himes machinery robotic welding cell machine features and models
- 1. Himes machinery offer OTC/Daihen 6-axis robotic welding cell new: 8 / 2007 with below mentioned specification: Model - AXMV4AP1-NEFU Condition: Excellent Price - $79,900
- 2. •Specifications of OTC / Daihen robot control are: Serial - L9672YZ5661410, Model - AXCAN1-U000 Specifications of OTC/Daihen digital inverter are: Serial - P10500YDK127871007, Model - DP500 Robot Reach: 55.5" ROBOT SPECIFICATIONS: Arm Revolving J1: +/- 170° Lower Arm J2: -155° to +90° Upper Arm J3: -170° to +180° Wrist Swing J4: +/- 155° Wrist Bending J5: -45° to +225°
- 3. Wrist Swing J6: +/- 205° Max. Velocity Arm Revolving J2: 2.62 RAD/S (150°/S) Max. Velocity Lower Arm J2: 2.79 RAD/S (160°/S) Max. Velocity Upper Arm J3: 2.97 RAD/S (170°/S) Max. Velocity Wrist Swing J4: 5.93 RAD/S (340°/S) Max. Velocity Wrist Bending J5: 5.93 RAD/S (340°/S) Max. Velocity Wrist Twist J6: 9.08 RAD/S (520°/S) Robot has 12' of Travel on Arc worker Robot Track Via AC Servo Rack & Pinion - Drive on Linear Guide Ways Robot Servo Motor with Brake & RV Gearbox, 1 Arc Min. Backlash ARCWORKER HSTS HEADSTOCK & TAILSTOCK POSITIONER: Headstock is AC Servo Driven Continuous Torque 32,745 In.-Lbs. at 10.8 RPM
- 4. Distance Between the Blanchard Ground 22" Dia. Face Plates: 176" Max. Swing: 60“ Weight Capacity: 5,456 Lbs. at 6" Offset Rotation: 1420° Max. with Infinite Position Selection Control & Programming is Thru the Robot Teach Pendant Weld Ground Capacity: 500 Amps at 100% Duty Cycle Welding Grounds at the Headstock & Tailstock 5716308 New 8/2007 Model - AXMV4AP1-NEFU EQUIPPED WITH OTC/Daihen Wire Feeder, Model - AF-4001 System Control Teach Pendant Miller Coolmate 4 Chiller Tough gun Torch Tender
- 5. (2) Regulator Flow Meters Full Set of Manuals & CD Controlled Magnetics 18 KVA Transformer The Base the Robot Travels on is attached to the Positioner. Base with (2) 17" Long Connecting A Positioner: 18' L x 38" W x 48" H Robot on Base: 200" L x 41" W x 102" H Overall Size of Rack with Robot Control, Digital Inverter, 18 KVA Transformer & Disconnects: 87" L x 28" W x 62" H NOTE from Himes Machinery USA: There is NO Safety Cage with this System. Article Source - http://www.himesmachinery.com/welding-cells.html
- 6. (2) Regulator Flow Meters Full Set of Manuals & CD Controlled Magnetics 18 KVA Transformer The Base the Robot Travels on is attached to the Positioner. Base with (2) 17" Long Connecting A Positioner: 18' L x 38" W x 48" H Robot on Base: 200" L x 41" W x 102" H Overall Size of Rack with Robot Control, Digital Inverter, 18 KVA Transformer & Disconnects: 87" L x 28" W x 62" H NOTE from Himes Machinery USA: There is NO Safety Cage with this System. Article Source - http://www.himesmachinery.com/welding-cells.html