RunnTech F200 Series Accelerator Foot Pedal is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and mainly used in hydraulic proportional control and electronic throttle control systems.
RunnTech F100 Series Proportional Accelerator PedalRunnTech Controls
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
This document provides information on the RunnTech RT2000 Series Hall Effect Fingertip Joystick, including its features, technical specifications, and configuration options. It can be used for applications like medical imaging equipment, automotive controls, and robotics. The joystick uses Hall effect sensors for single, dual, or three-axis control and provides proportional analog output signals. It is IP65 rated and has a mechanical life of 5 million cycles.
Axle load sensor DDE08 - weight control on transportYury Lavrentiev
Presentation on axle load sensors for vehicles with air suspension. Suitable for all types of vehicles - buses, trucks, heavy machines. Designed to fit into any GPS tracking solution. Safe and easy installation. Sensor's manufacturer - Technoton. Official EU distributor: Wagencontrol, Czech Republic. www.wagencontrol.eu
Business side:
Weight control can be extremely important for specific customers. Usually, they turn their eyes to GPS tracking companies for a solution. Wagencontrol, as a supplier of telematics sensors for GPS tracking providers, got such solution.
Who are the end-users?
First of all, they are the companies, that transport unknown in advance amounts of cargo, like in row wood industry. To prevent overload, they usually have stationary weighting station to detect the load. Otherwise, they can damage the roads, and so be a subjects to a huge fines, and damage the equipment. Municipal services, like waist collectors, never know what is really inside in KG, and fleet owners got no idea, was indicated stop on the GPS tracking service just a stop or was it unpaid loading? The same works perfectly for all other machines - public buses, logistics trucks, construction vehicles.
Axle load sensors from JSC Mechatronics. InstallationPawel Elenski
The document discusses Eurosens axle load sensors for measuring air pressure in vehicle air springs or suspension. It provides details on installation, electrical connection, calibration and operation of Eurosens Difference 01 and leaf spring sensors. The sensors measure air pressure or suspension deflection to determine axle load and output a stabilized voltage signal. Installation requires analysis of vehicle design and mounting the sensor to the air spring, air line, or suspension lever arm.
The document describes an automatic voltage regulator (AVR) product line from Sollatek.
- It provides voltage regulation for applications from small domestic units up to large industrial 500kVA installations, regulating voltage within ±4% accuracy.
- The AVR uses microprocessor control for fast 1250 Volts/second correction and reliability compared to mechanical regulators.
Runn tech rt620 series potentiometer fingertip joystickRunnTech Controls
The RunnTech RT620 series fingertip joystick provides precision multi-axis control through a potentiometer sensor. It is ideal for use in medical imaging equipment, measurement devices, robotics, and other applications. The joystick offers dual-axis or three-axis control through proportional resistive output and has a mechanical spring-return to center position. It is CE approved and RoHS compliant.
AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. Canopus Instruments offers the highly capable AC Voltage and Current Transducers. Order your machine now!
Visit:
http://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/powerline-transducers-ac-voltage-current-converter-90-270vac-supply/
The document discusses different controller options for fans, including controllers for EC fans with 0-10V input, compact fans with PWM input, and compact fans with 2/3 wires and no control input. It provides part numbers and specifications for each type of controller, including temperature control ranges, voltage options, and alarm output types. Upcoming controller options are also mentioned, such as a DCP fan controller that allows PLCs to control compact fans and various manual control options for EC fans with 0-10V inputs.
RunnTech F100 Series Proportional Accelerator PedalRunnTech Controls
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
This document provides information on the RunnTech RT2000 Series Hall Effect Fingertip Joystick, including its features, technical specifications, and configuration options. It can be used for applications like medical imaging equipment, automotive controls, and robotics. The joystick uses Hall effect sensors for single, dual, or three-axis control and provides proportional analog output signals. It is IP65 rated and has a mechanical life of 5 million cycles.
Axle load sensor DDE08 - weight control on transportYury Lavrentiev
Presentation on axle load sensors for vehicles with air suspension. Suitable for all types of vehicles - buses, trucks, heavy machines. Designed to fit into any GPS tracking solution. Safe and easy installation. Sensor's manufacturer - Technoton. Official EU distributor: Wagencontrol, Czech Republic. www.wagencontrol.eu
Business side:
Weight control can be extremely important for specific customers. Usually, they turn their eyes to GPS tracking companies for a solution. Wagencontrol, as a supplier of telematics sensors for GPS tracking providers, got such solution.
Who are the end-users?
First of all, they are the companies, that transport unknown in advance amounts of cargo, like in row wood industry. To prevent overload, they usually have stationary weighting station to detect the load. Otherwise, they can damage the roads, and so be a subjects to a huge fines, and damage the equipment. Municipal services, like waist collectors, never know what is really inside in KG, and fleet owners got no idea, was indicated stop on the GPS tracking service just a stop or was it unpaid loading? The same works perfectly for all other machines - public buses, logistics trucks, construction vehicles.
Axle load sensors from JSC Mechatronics. InstallationPawel Elenski
The document discusses Eurosens axle load sensors for measuring air pressure in vehicle air springs or suspension. It provides details on installation, electrical connection, calibration and operation of Eurosens Difference 01 and leaf spring sensors. The sensors measure air pressure or suspension deflection to determine axle load and output a stabilized voltage signal. Installation requires analysis of vehicle design and mounting the sensor to the air spring, air line, or suspension lever arm.
The document describes an automatic voltage regulator (AVR) product line from Sollatek.
- It provides voltage regulation for applications from small domestic units up to large industrial 500kVA installations, regulating voltage within ±4% accuracy.
- The AVR uses microprocessor control for fast 1250 Volts/second correction and reliability compared to mechanical regulators.
Runn tech rt620 series potentiometer fingertip joystickRunnTech Controls
The RunnTech RT620 series fingertip joystick provides precision multi-axis control through a potentiometer sensor. It is ideal for use in medical imaging equipment, measurement devices, robotics, and other applications. The joystick offers dual-axis or three-axis control through proportional resistive output and has a mechanical spring-return to center position. It is CE approved and RoHS compliant.
AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. Canopus Instruments offers the highly capable AC Voltage and Current Transducers. Order your machine now!
Visit:
http://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/powerline-transducers-ac-voltage-current-converter-90-270vac-supply/
The document discusses different controller options for fans, including controllers for EC fans with 0-10V input, compact fans with PWM input, and compact fans with 2/3 wires and no control input. It provides part numbers and specifications for each type of controller, including temperature control ranges, voltage options, and alarm output types. Upcoming controller options are also mentioned, such as a DCP fan controller that allows PLCs to control compact fans and various manual control options for EC fans with 0-10V inputs.
The document discusses different controller options for fans, including:
1. EC fan controllers for fans with 0-10V inputs that control temperature between 20-40°C or 35-55°C with alarm outputs.
2. DCP fan controllers for compact fans with PWM input that also control temperature between 20-40°C or 35-55°C and come in 12, 24, and 48V options.
3. DC fan controllers for compact fans with 2/3 wires that control 1-17W fans between 20-40°C or 35-55°C temperature ranges and come in 12, 24, and 48V options.
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
The document discusses AS interface bus communication for controlling on/off actuators serially. Up to 31 slave devices can connect to an AS interface bus and be powered and controlled by a master device. Under extended addressing, 62 slaves can connect but device capacitance limits applicability. The Kinetrol AS interface circuit allows actuators to connect to the bus for control, monitoring and power via a single two-wire cable according to the AS interface 2.1 specification.
This document provides specifications for Temposonics R Series position sensors that use a Synchronous Serial Interface (SSI) for output. Key details include:
- SSI is a serial interface that uses a clock pulse train from a controller to transmit 24- or 25-bit position data from the sensor one bit at a time.
- Temposonics R Series sensors offer modular construction and non-contacting magnetostrictive technology in either a rod style (Model RH) or profile style (Model RP) housing.
- Specifications include resolutions up to 2 microns, operating temperatures from -40°C to 105°C, IP65/IP67 sealing, and measuring ranges from 25
This document summarizes an AEVR multi-functional digital voltage controller. It detects over voltage, under voltage, phase loss, and phase imbalance. It has adjustable tripping delays from 0.1 to 10 seconds and fixed delays of 2 to 3 seconds. It can detect voltages from 85% to 110% of the rated operating voltage and has reset times of 1 or 5 seconds. It is available in P, H, and L types for different voltage ranges and comes in single and three phase models for wiring configurations.
United Electric TX200 Pressure TransmitterIves Equipment
The document discusses several models of pressure transmitters:
- The TX200A and TX200B are ASIC models that provide a 4-20 mA output with various pressure ranges from 0-15 psi to 0-25,000 psi.
- The TX200H is a HART Smart pressure transmitter that uses the HART 7 communication protocol and provides diagnostics and asset management data.
- All models have a 316 stainless steel enclosure and provide accurate pressure measurement for various industrial process applications.
This document provides a quick start guide for installing, starting up, and programming a PowerFlex 400 Adjustable Frequency AC Drive. It summarizes the basic steps and safety precautions required. For full installation instructions and technical specifications, users should refer to the detailed PowerFlex 400 User Manual. The guide covers mounting considerations, wiring requirements, input/output specifications, and agency certifications for the drive.
The document provides information on the SX460 Automatic Voltage Regulator (AVR) including:
1) The AVR is used to regulate generator voltage and includes under-speed and loss of sensing protection. It controls power to the exciter field to maintain output voltage.
2) The AVR samples generator output voltage and uses feedback to control power to the exciter field, compensating for loads and maintaining voltage.
3) It provides under-frequency protection by reducing output voltage proportionally below a preset threshold based on generator speed.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
The document describes the BD30A series of brushless servo amplifiers made by Electromate. It provides specifications for four models including peak and continuous current limits, voltage ratings, size, and connector pin functions. The amplifiers are designed to drive brushless DC motors and include protections from overvoltage, overcurrent, and overheating. Current limit and monitoring can be adjusted via DIP switches.
The document describes the BD30A series of brushless servo amplifiers made by Electromate. It provides specifications for four models including peak and continuous current limits, voltage ratings, size, and connector pin functions. The amplifiers are designed to drive brushless DC motors and include protections from overvoltage, overcurrent, and overheating. They interface with digital controllers using PWM and direction inputs.
The document provides instructions for the CT-2000PLUS Series AC Motor Driver. It includes an introduction, table of contents, and sections on inspection upon receiving, installation and storage, application notes, block diagram and wiring, operation test, function setup and specification, alarm display indications, troubleshooting, maintenance and inspection, standard specifications, function code table, Modbus address of display data, and series communication user manual. The document provides detailed guidance on setup, wiring, operation, maintenance and specifications for the CT-2000PLUS AC motor driver unit.
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
This document introduces ZIPPTORK's wireless torque transducer and torque controller products for bolting applications. The system uses a patented control device, algorithm, and wireless torque transducer to enable real-time torque control and data collection for various power tools. The torque controller can control tools from multiple brands and models to achieve accurate torque control of +/-5-15%. It allows monitoring of the fastening process, recording of torque data, and intelligent compensation of torque loss. The wireless torque transducer transmits torque and rotation data to the controller or mobile devices via Bluetooth.
RunnTech [/rənˈtek/] specializes in research, development and manufacturing joysticks and controllers (Potentiometer or Hall sensors) for industrial applications. All our joysticks and controllers are mainly used in hydraulic proportional control or variable frequency motor control, such as Cranes lifting control, Mine hoisting winch, Scissor Lift, Offshore drilling equipment, Maritime machinery, CNC turning machinery, Rolling mill control desk, Industrial robotics, Welding or Cutting machine, Audio video editing equipments, Photography CCTV control system, Medical imaging system, Loaders, Cranes, Tractors, Harvesters, Excavators, Shield tunneling machine, Rotary table (drilling rig), Electric forklift truck, Aerial work platform, etc.
The 1240i is a low-cost, programmable step motor driver that can be used for a wide range of motion control applications. It includes a controller integrated with a 50 watt microstepping amplifier. The 1240i can be programmed using Windows software or commanded in real time from a PC or PLC. It can also be networked with up to eight other 1240i drives using a hub to fulfill multi-axis application requirements at low cost.
Measure humidity in harsh environments with the best-in-class transmitter you can truly depend on. The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is ideal for applications where stable humidity measurement is essential. With multiple options to choose from, the instrument can be tailored to meet the specific needs of each individual application.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
RunnTech H100 multifunction control handle (tiller head) is attractive, ergonomic and practical function control handles used in electric pallet truck/jacks, walkie-stackers and tow tractors, pedestrian industrial truck, transport trolleys, cleaning machinery, special applications, etc. These control handle include an electronic throttle mechanism and an emergency switch, and may be equipped with a variety of functional options, including switches (horn, lift, lower), throttle and instrumentation.
The document discusses different controller options for fans, including:
1. EC fan controllers for fans with 0-10V inputs that control temperature between 20-40°C or 35-55°C with alarm outputs.
2. DCP fan controllers for compact fans with PWM input that also control temperature between 20-40°C or 35-55°C and come in 12, 24, and 48V options.
3. DC fan controllers for compact fans with 2/3 wires that control 1-17W fans between 20-40°C or 35-55°C temperature ranges and come in 12, 24, and 48V options.
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
The document discusses AS interface bus communication for controlling on/off actuators serially. Up to 31 slave devices can connect to an AS interface bus and be powered and controlled by a master device. Under extended addressing, 62 slaves can connect but device capacitance limits applicability. The Kinetrol AS interface circuit allows actuators to connect to the bus for control, monitoring and power via a single two-wire cable according to the AS interface 2.1 specification.
This document provides specifications for Temposonics R Series position sensors that use a Synchronous Serial Interface (SSI) for output. Key details include:
- SSI is a serial interface that uses a clock pulse train from a controller to transmit 24- or 25-bit position data from the sensor one bit at a time.
- Temposonics R Series sensors offer modular construction and non-contacting magnetostrictive technology in either a rod style (Model RH) or profile style (Model RP) housing.
- Specifications include resolutions up to 2 microns, operating temperatures from -40°C to 105°C, IP65/IP67 sealing, and measuring ranges from 25
This document summarizes an AEVR multi-functional digital voltage controller. It detects over voltage, under voltage, phase loss, and phase imbalance. It has adjustable tripping delays from 0.1 to 10 seconds and fixed delays of 2 to 3 seconds. It can detect voltages from 85% to 110% of the rated operating voltage and has reset times of 1 or 5 seconds. It is available in P, H, and L types for different voltage ranges and comes in single and three phase models for wiring configurations.
United Electric TX200 Pressure TransmitterIves Equipment
The document discusses several models of pressure transmitters:
- The TX200A and TX200B are ASIC models that provide a 4-20 mA output with various pressure ranges from 0-15 psi to 0-25,000 psi.
- The TX200H is a HART Smart pressure transmitter that uses the HART 7 communication protocol and provides diagnostics and asset management data.
- All models have a 316 stainless steel enclosure and provide accurate pressure measurement for various industrial process applications.
This document provides a quick start guide for installing, starting up, and programming a PowerFlex 400 Adjustable Frequency AC Drive. It summarizes the basic steps and safety precautions required. For full installation instructions and technical specifications, users should refer to the detailed PowerFlex 400 User Manual. The guide covers mounting considerations, wiring requirements, input/output specifications, and agency certifications for the drive.
The document provides information on the SX460 Automatic Voltage Regulator (AVR) including:
1) The AVR is used to regulate generator voltage and includes under-speed and loss of sensing protection. It controls power to the exciter field to maintain output voltage.
2) The AVR samples generator output voltage and uses feedback to control power to the exciter field, compensating for loads and maintaining voltage.
3) It provides under-frequency protection by reducing output voltage proportionally below a preset threshold based on generator speed.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
The document describes the BD30A series of brushless servo amplifiers made by Electromate. It provides specifications for four models including peak and continuous current limits, voltage ratings, size, and connector pin functions. The amplifiers are designed to drive brushless DC motors and include protections from overvoltage, overcurrent, and overheating. Current limit and monitoring can be adjusted via DIP switches.
The document describes the BD30A series of brushless servo amplifiers made by Electromate. It provides specifications for four models including peak and continuous current limits, voltage ratings, size, and connector pin functions. The amplifiers are designed to drive brushless DC motors and include protections from overvoltage, overcurrent, and overheating. They interface with digital controllers using PWM and direction inputs.
The document provides instructions for the CT-2000PLUS Series AC Motor Driver. It includes an introduction, table of contents, and sections on inspection upon receiving, installation and storage, application notes, block diagram and wiring, operation test, function setup and specification, alarm display indications, troubleshooting, maintenance and inspection, standard specifications, function code table, Modbus address of display data, and series communication user manual. The document provides detailed guidance on setup, wiring, operation, maintenance and specifications for the CT-2000PLUS AC motor driver unit.
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
This document introduces ZIPPTORK's wireless torque transducer and torque controller products for bolting applications. The system uses a patented control device, algorithm, and wireless torque transducer to enable real-time torque control and data collection for various power tools. The torque controller can control tools from multiple brands and models to achieve accurate torque control of +/-5-15%. It allows monitoring of the fastening process, recording of torque data, and intelligent compensation of torque loss. The wireless torque transducer transmits torque and rotation data to the controller or mobile devices via Bluetooth.
RunnTech [/rənˈtek/] specializes in research, development and manufacturing joysticks and controllers (Potentiometer or Hall sensors) for industrial applications. All our joysticks and controllers are mainly used in hydraulic proportional control or variable frequency motor control, such as Cranes lifting control, Mine hoisting winch, Scissor Lift, Offshore drilling equipment, Maritime machinery, CNC turning machinery, Rolling mill control desk, Industrial robotics, Welding or Cutting machine, Audio video editing equipments, Photography CCTV control system, Medical imaging system, Loaders, Cranes, Tractors, Harvesters, Excavators, Shield tunneling machine, Rotary table (drilling rig), Electric forklift truck, Aerial work platform, etc.
The 1240i is a low-cost, programmable step motor driver that can be used for a wide range of motion control applications. It includes a controller integrated with a 50 watt microstepping amplifier. The 1240i can be programmed using Windows software or commanded in real time from a PC or PLC. It can also be networked with up to eight other 1240i drives using a hub to fulfill multi-axis application requirements at low cost.
Measure humidity in harsh environments with the best-in-class transmitter you can truly depend on. The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is ideal for applications where stable humidity measurement is essential. With multiple options to choose from, the instrument can be tailored to meet the specific needs of each individual application.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
RunnTech H100 multifunction control handle (tiller head) is attractive, ergonomic and practical function control handles used in electric pallet truck/jacks, walkie-stackers and tow tractors, pedestrian industrial truck, transport trolleys, cleaning machinery, special applications, etc. These control handle include an electronic throttle mechanism and an emergency switch, and may be equipped with a variety of functional options, including switches (horn, lift, lower), throttle and instrumentation.
The document describes an analog servo drive called the BE25A20FAC. It has the following key specifications:
- It can deliver up to 25A of peak current and 12.5A of continuous current from a 30-130V AC power supply.
- It is designed to drive brushless DC motors and features four quadrant regenerative operation, adjustable current limits, and selectable operating modes including current, open loop, and encoder velocity modes.
- It provides motor commutation from hall sensors or an encoder, and supports feedback from halls, encoders, or a tachometer.
- It has adjustable parameters like loop gain, current limit, input gain and offset via onboard potentiometers.
RT02 rugged industrial joystick controller is designed for hydraulic proportional control and variable frequency motor control, such as Construction machinery, Precision machine, Military robotics, Refuse handling trucks, Unmanned vehicles, Rotary drilling rigs, Cranes, Marine etc. Available in one two or three axis configurations, this joystick can be supplied with non-contact Hall effect sensors or long life potentiometer tracks.
Catalog: Inverter Frenic-Lift Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
KE300A-01 single phase output inverter is a kind of inverter
special for single phase motor. It is based on the advanced
control platform of KE300A, combining the unique start and
control requirements of the single phase motor, and using
a brand-new flux vector control technology to achieve true
two phase orthogonal 90° flux vector control. With high start
torque and high efficiency of overall unit, it can be widely
applicable to single phase asynchronous motors, such as
fans, pumps, power tools, etc.
The document provides information on RunnTech's line of industrial joysticks and accessories. It describes several joystick models including the RT-100 and RT-200. The RT-100 is a single or dual axis joystick that uses potentiometer sensors or Hall sensors for proportional control applications. The RT-200 is a fully sealed single axis joystick that offers potentiometer, Hall, or standard voltage outputs and is suitable for environments up to IP65. Both joysticks are designed for long life and have vibration and impact resistance. The document provides detailed specifications, wiring diagrams, installation instructions and configuration options for various RunnTech joystick models.
The document describes the M/VTM Series Servo Drive AVB200A100. It is designed to drive brushless DC motors for vehicle applications with a peak current of 200A and continuous current of 125A. It can interface with digital controllers or operate independently, accepting various command and feedback inputs. Key features include adjustable parameters, operating mode selection, and safety protections.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
This document provides specifications for the M/VTM Series Servo Drive AVB250A060. It is designed to drive brushless DC motors for vehicle applications with a peak current of 250A and continuous current of 150A. It has adjustable parameters, fault protection, and can accept various command and feedback inputs. It is compliant with various safety and environmental standards.
The document describes a servo drive model AVB100C200 that is designed to drive brushless DC motors for vehicle applications. It can interface with digital controllers or operate independently, accepts various feedback types, and has adjustable parameters. The drive has overcurrent, overvoltage, and other protections. It is compliant with various safety and environmental standards.
RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.
RT200 Single-axis Industrial Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as Mining hoist machine, Oil hoist, Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Refuse handling trucks, Fire and off-highway vehicle etc.
The document describes an analog servo drive that:
- Can provide up to 60A of peak current and 30A of continuous current from a 60-400VDC power supply.
- Includes protection against overvoltage, overcurrent, overheating and other faults.
- Can be controlled via a ±10V analog command and supports Hall, encoder and tachometer feedback.
- Has adjustable current limits, acceleration/deceleration rates, and other parameters via onboard potentiometers.
Catalog biến tần Frenic Micro Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
1. The document describes a new compact inverter called the FVR-Micro that is simple, small, and smart.
2. It has several features like high starting torque, stable operation even with step loads, and the ability to automatically restart operation after an instantaneous power failure.
3. The FVR-Micro also offers energy savings when used with fans or pumps compared to damper control, as well as noise reduction and savings from its cooling fan ON/OFF function.
The S60A40 PWM servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It interfaces with digital controllers and requires 2 sinusoidal command signals with 120° phase shift for motor commutation. The drive is fully protected and requires only a single DC power supply. It provides optical isolation between high and low power signals.
RT300 series industrial crane joysticks (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 50Hz, 60Hz voltage 380V and 220V DC to control the hoist crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake.
The S100A40 analog servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It interfaces with digital controllers and requires 2 sinusoidal command signals with 120° phase shift for motor commutation. The drive provides full motor and system protection, and all signal inputs and outputs are optically isolated from the power section. It is compliant with various safety and EMC standards.
Similar to RunnTech F200 Series Hall Sensor Accelerator Pedal (20)
This document provides information on joysticks sold by RunnTech Electronics for various aerial lift equipment brands including Genie, JLG, Skyjack, Haulotte, and Manitou. It lists over 100 part numbers and the equipment models each joystick is compatible with. The joysticks are high quality replacements for original equipment.
RunnTech Electronics (Changzhou) Corp. produces high quality replacement joysticks for Linde forklifts. The document lists over 30 Linde forklift models and the corresponding joystick part numbers that are compatible replacements. It provides contact information for RunnTech Electronics including their phone number, fax, email, and website.
RunnTech F100 & F200 Series Proportional Accelerator PedalRunnTech Controls
This document provides contact information for RunnTech, a company located in Changzhou, Jiangsu, China that manufactures two accelerator pedal models - the F100 Series Proportional Accelerator Pedal and the F200 Series Hall Sensor Accelerator Pedal. It lists RunnTech's address, phone number, fax number, mobile number, and email for contacting the company.
The document provides information on the RunnTech RT01 Series Cobra-head Shaped Joystick Controller. It describes the product as a joystick controller that can be used for proportional control applications and is available with hall sensor or potentiometer sensors. It lists some key features such as being spring-return or friction-hold, having excellent analog control output, and a long life cycle. It also provides technical specifications on parameters like operating temperature, vibration resistance, electrical outputs and mechanical dimensions.
RunnTech Joystick for Linde 7919040095 & 7919040093RunnTech Controls
This document describes two joystick models - 7919040095 and 7919040093 - produced by RunnTech Electronics for use in Linde forklifts. Both joysticks have a spring-return to center mechanism, full sealed design, and can operate between -35 and 80 degrees Celsius. The 7919040095 model has dual axis control while the 7919040093 has single axis control. The joysticks are easy to install, flexible to operate, uniform in texture, and maintenance-free with a lifespan of 5 million cycles.
RunnTech W100 Series Self-centering Hall Effect Proportional Thumbwheel Contr...RunnTech Controls
RunnTech W100 series thumbwheel controller is a revolutionary Hall effect control providing proportional control, can be used to install on the console alone, also can be installed in HD10 grip or armrest and panel mount integration.
RT800 industrial Joystick is suitable for control of Electric cars, Electric wheelchairs, Robots, Human-computer Remote video operating systems, Heavy mobile machinery, Measurement systems, Navigation systems, Studio stage lighting equipment, Military equipment, etc
The document describes the RunnTech RT600 Series Hall Effect Fingertip Joystick. It has the following key points:
1. It uses Hall effect sensors and provides single, dual, or triple axis control with mechanical spring-return to center operation.
2. It has applications in medical, automation, optics, robotics and other industries.
3. It has features like IP65 protection, infinite resolution, 5 million life cycles and meets various EMC standards.
RunnTech 3 Axis Multi functional Cobra Shaped Knob Joystick for Port Material...RunnTech Controls
RunnTech RT90 series multi-functional control with 6 switches (2x illuminating, 3x pushbuttons and 1x deadman trigger) and 1x proportional thumbwheel joystick controller for container reach stacker port material handling equipment (potentiometers outside-mounted type) with standard DB25 Male analog 25-pin Connector for serial connections.
RT100 industrial joystick controller, is mainly used in hydraulic proportional control or variable frequency motor control, such as Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Refuse handling trucks, Fire and off-highway vehicle, etc.
The RunnTech P9000 Proportional Amplifier is used with hydraulic proportional valves. It has an adjustable output current and flutter amplitude, protection from overcurrent and short circuits, and controls output current based on an external 0-10V or 0-15V signal. It operates from a 20-32VDC power supply and has adjustable rise and fall times from 0.1-10 seconds.
RT-300 Series Industrial Joysticks (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 50Hz, 60Hz voltage 380V and 220V DC to control the crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake.
RT-300 Series Industrial Joysticks are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 50Hz, 60Hz voltage 380V and 220V DC to control the crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake.
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.
"Choosing proper type of scaling", Olena SyrotaFwdays
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...Jason Yip
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.
AppSec PNW: Android and iOS Application Security with MobSFAjin Abraham
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
RunnTech F200 Series Hall Sensor Accelerator Pedal
1. RunnTech Electronics (Changzhou) Corp. F200 Series Hall Sensor Accelerator Pedal
Hall sensor;
RunnTech F200 series Hall accelerator pedal is mainly used in hydraulic proportional and
variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars.
5-48V wide output, 0-5V, 0-10V modular control;
With a set of switch 125V5A, 250V3A;
Mechanical spring-return operation;
Excellent analog proportional control output or switch signal output;
F200 Series Hall Sensor Accelerator Pedal
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | e-mail: info@runntech.com | website: www.runntech.com 01
Product Features
Application
Easy to install, flexible operation, maintenance-free;
5 million life cycles.
Technical Information
Storage Temperature
Environment Parameter
Operating Temperature
Protection Grade
Vibration Amplitude±3g, Frequency: 10Hz-200Hz
Impact 20g, 6ms, Semi-sinusoidal
EMC Anti-interference Rank 100V/m, 30MHz to 1GHz, 80% sine-wave modulation, meet EN50082-2 (1995) standard
EMC Emission Rank Rank B, 150KHz to 30MHz, meet EN50081-2 (1993) standard
ESD Anti-interference Rank Rank 4, 8KV contact discharge, 15KV air discharge, meet IEC61000-4-2 standard
Mechanical Parameter
Mechanical Angle
Operating Torque
Mechanical Life
Mechanical Error
Potentiometer: ±32°, Hall sensor: ±20°
5N (50N max)
5 million
±0.5°
Electrical Parameter
Hall sensor
Power Supply Voltage
Power Supply Current Consumption 6.5mA/hall sensor
5±0.5V DC
IP64
-50°C~+80°C
-40°C~+80°C
Resolution Ratio infinite
Maximum Voltage 15VDC
Reversed Polarity Maximum Voltage 14.5VDC
Load Resistance 5KΩ
Median Voltage (no-load) 48 - 52%Vs
RunnTech
2. tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | e-mail: info@runntech.com | website: www.runntech.com
F200 Series Hall Sensor Accelerator Pedal RunnTech Electronics (Changzhou) Corp.
02
Product Configuration
F200 series Hall sensor accelerator pedal
T - spring return to center
1
2
Serial Number
Operation Mode
3
4
Electrical Output Form
No. Item Content
Hall sensor
HV1: DC 5V, 0~2.5~5V (rail to rail)
HV2: DC 5V, 0.5~2.5~4.5V
HV3: DC 5V, 1.0~2.5~4.0V
HV4: DC 5V, 1.25~2.5~3.75V
01 (the quantity of directional switch signal)
Refer to Table 4-3 Directional Switch Signal Closed Position
Quantity of Switch Signal
Switch Signal Closed Position5
F200 - T - HV1 - 01 (1)
serial number
operation mode
electrical output form
switch signal closed position
quantity of switch signal
① ② ③ ④ ⑤
Product Installation
RunnTech
3. RunnTech Electronics (Changzhou) Corp. F200 Series Hall Sensor Accelerator Pedal
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | e-mail: info@runntech.com | website: www.runntech.com 03
Electrical Output Form Hall sensor
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Entity on behalf of the switch is closed
Analog output refer to the following figure
0°
Table 4-3 Directional Switch Signal Closed Position
HV4: DC 5V, 1.25~2.5~3.75V
HV3: DC 5V, 1.0~2.5~4.0V
HV2: DC 5V, 0.5~2.5~4.5V
HV1: DC 5V, 0~2.5~5V (rail to rail)
RunnTech