robotic2.docx
•Download as DOCX, PDF•
0 likes•26 views
Muhammad Jawhar Anwar built a helicopter robot for his Fourth Stage A1 class at Salahaddin University-Erbil's Mechanical & Mechatronics department. The robot uses a DC motor to rotate its rotor and has an LED light, buzzer, and logic programming to move straight, rotate clockwise and counterclockwise, turn the orange LED on while moving backward, and turn the green LED on.
Report
Share
Report
Share
Recommended
text book Programmable-Logic-Controllers plc.pdf
This document provides an overview and introduction to programmable logic controllers (PLCs). It discusses the basic parts and components of a PLC including the input/output section, central processing unit, memory, and programming devices. It also describes the basic principles of how PLCs operate by scanning inputs, executing a user-created program, and updating outputs. The document is intended to familiarize readers with the basic concepts and components of PLCs.
2.pdf
Kurdistan Regional Government Iraq Ministry of Electricity generates electricity primarily from fossil fuels such as natural gas. Renewable energy sources such as hydro, solar, wind, and geothermal currently account for a smaller portion of electricity generation but their use is growing. Geothermal energy harnesses heat from within the earth through technologies such as hydrothermal, geopressure, and hot dry rock systems to generate electricity without directly burning fuels. Geothermal resources in the Kurdistan region show potential for development to increase renewable energy supply and reduce dependence on fossil fuels.
3.pdf
This document appears to be a resume for Zeyad Azeez Abdullah, a mechanical engineer. It includes his name, title, date, and sections on qualifications, experience, education, skills and interests. There are also diagrams and specifications for solar panels, batteries, and other energy related topics.
robotic2.docx
Muhammad Jawhar Anwar built a helicopter robot for his Fourth Stage A1 class at Salahaddin University-Erbil's Mechanical & Mechatronics department. The robot uses a DC motor to rotate its rotor and has an LED light, buzzer, and logic programming to move straight, rotate clockwise and counterclockwise, turn the orange LED on while moving backward, and turn the green LED on.
Power Plant Engineering - (Malestrom) (1).pdf
This document is the preface to a book on power plant engineering. It discusses the motivation for writing the book, which was to benefit students and researchers by covering key topics in power generation in a clear and concise manner. The preface notes that the book aims to satisfy engineering scholars and researchers by addressing conventional power plant topics at an international level. It also acknowledges those who encouraged and supported the authors in writing this pioneering textbook.
I-Section-US-1003.pdf
This document provides an index and specifications for various optical measuring instruments, including profile projectors and microscopes. It lists several models of profile projectors from the PJ-A3000 and PJ-H30 series, along with their specifications, optional accessories, and available fixtures. It also lists several models of measuring microscopes from the MF, MF-U, and MSM-400 series, along with their specifications and optional accessories. The document provides detailed information on the specifications, features, and options for these optical measuring instruments.
Recommended
text book Programmable-Logic-Controllers plc.pdf
This document provides an overview and introduction to programmable logic controllers (PLCs). It discusses the basic parts and components of a PLC including the input/output section, central processing unit, memory, and programming devices. It also describes the basic principles of how PLCs operate by scanning inputs, executing a user-created program, and updating outputs. The document is intended to familiarize readers with the basic concepts and components of PLCs.
2.pdf
Kurdistan Regional Government Iraq Ministry of Electricity generates electricity primarily from fossil fuels such as natural gas. Renewable energy sources such as hydro, solar, wind, and geothermal currently account for a smaller portion of electricity generation but their use is growing. Geothermal energy harnesses heat from within the earth through technologies such as hydrothermal, geopressure, and hot dry rock systems to generate electricity without directly burning fuels. Geothermal resources in the Kurdistan region show potential for development to increase renewable energy supply and reduce dependence on fossil fuels.
3.pdf
This document appears to be a resume for Zeyad Azeez Abdullah, a mechanical engineer. It includes his name, title, date, and sections on qualifications, experience, education, skills and interests. There are also diagrams and specifications for solar panels, batteries, and other energy related topics.
robotic2.docx
Muhammad Jawhar Anwar built a helicopter robot for his Fourth Stage A1 class at Salahaddin University-Erbil's Mechanical & Mechatronics department. The robot uses a DC motor to rotate its rotor and has an LED light, buzzer, and logic programming to move straight, rotate clockwise and counterclockwise, turn the orange LED on while moving backward, and turn the green LED on.
Power Plant Engineering - (Malestrom) (1).pdf
This document is the preface to a book on power plant engineering. It discusses the motivation for writing the book, which was to benefit students and researchers by covering key topics in power generation in a clear and concise manner. The preface notes that the book aims to satisfy engineering scholars and researchers by addressing conventional power plant topics at an international level. It also acknowledges those who encouraged and supported the authors in writing this pioneering textbook.
I-Section-US-1003.pdf
This document provides an index and specifications for various optical measuring instruments, including profile projectors and microscopes. It lists several models of profile projectors from the PJ-A3000 and PJ-H30 series, along with their specifications, optional accessories, and available fixtures. It also lists several models of measuring microscopes from the MF, MF-U, and MSM-400 series, along with their specifications and optional accessories. The document provides detailed information on the specifications, features, and options for these optical measuring instruments.
ref.pdf
This document discusses refrigeration and its various applications and methods. It begins by defining refrigeration as the process of achieving and maintaining a temperature below surroundings through the removal of heat. The main types of refrigeration are then listed as domestic, commercial, industrial, marine, air conditioning, and food preservation. Various natural and early mechanical refrigeration techniques are described, such as the use of icehouses and evaporative cooling. The ideal vapor compression refrigeration cycle is explained through its four processes. Absorption refrigeration using ammonia-water and lithium bromide-water systems is also summarized. Compressor types including reciprocating, rotary, and centrifugal are defined. Key refrigeration system components and their functions are outlined.
lect 01 (1).pdf
This document provides an introduction to programmable logic controllers (PLCs). It defines a PLC as a specialized computer that monitors processes and controls machinery. The document outlines the history of PLCs in automating factory processes. It also describes the components of a basic PLC system and lists advantages such as flexibility, ease of programming, and reliability compared to traditional relay-based controls.
plasma cutting.pdf
This document discusses the design of a CNC plasma cutting machine. It begins with an introduction to plasma cutting, explaining that plasma cutting uses a high-temperature jet of plasma gas to cut electrically conductive materials like metals. It then provides a flow chart showing the basic components and process of a plasma cutter. The document goes on to discuss the technical details of designing a CNC plasma cutting machine, including the mechanical components, electrical systems, and software setup required to automate the plasma cutting process through computer numerical control.
Grad. Proj. Poster Templete akam.docx
This document appears to be a research project report from Salahaddin University's College of Engineering for the 2018-2019 year. The report was prepared by 4 students and supervised by a faculty member. It includes sections on the introduction, methodology, conclusion, references, and images or figures related to the research project.
project format writting 2.docx
This document appears to be a template for a student project submitted to the Mechanical Engineering Department at Salahaddin University-Erbil in Iraq. The template provides an outline for the typical sections included in an engineering student project paper, such as an abstract, acknowledgements, table of contents, references, etc. It also includes placeholders for the student to include the introduction, methodology, example analysis and design, results and discussion, and conclusion sections. The introduction section provides background on the project and defines the problem statement, objectives and outline. The methodology section details the analysis procedures. The example section applies the methodology to a relevant problem. The results, discussion and conclusion sections present and interpret the findings and link them back to the
PLC4.docx
The document describes a PLC program for controlling a water filling and discharging process in a tank. The program uses two level sensors, one for high level and one for low level, to control a feeding valve and discharge valve. When the low level sensor is triggered, the feeding valve turns on to fill the tank, and when the high level sensor is triggered, the discharge valve turns on to empty the tank. The program is designed to maintain the water level between the two sensor points.
PLC 1 (2).docx
This document summarizes a student project to control a two-directional traffic light using a PLC. It introduces the use of traffic lights to control vehicle and pedestrian traffic. Timers are used to provide time delays to control the light sequences. A ladder logic diagram is programmed with contacts that simulate relays to control the red and green lights for each of the three poles in sequences, with one pole green at a time for a set period before moving to the next pole. The process then repeats continuously to control traffic flow in both directions.
Project Cooling Tower.pptx
This document summarizes different types of cooling towers. It describes how cooling towers work by bringing air and water into contact to reduce the water's temperature through evaporation. It discusses the components of cooling towers, including fill materials, drift eliminators, nozzles, fans, and driveshafts. It also compares crossflow and counterflow cooling towers and how they differ in their water and air flow configurations. Finally, it outlines the differences between factory-assembled and field-erected cooling towers.
final project.docx
This document is a research project submitted in partial fulfillment of the requirements for a degree in Mechanical and Mechatronics Engineering. It contains an abstract, introduction, and 4 chapters that discuss cooling towers, their components, thermal performance testing, and electrical components. The introduction provides background on cooling towers and how they work to lower water temperature through evaporation and heat transfer to the atmosphere. It also discusses prior research on improving cooling tower performance. The abstract indicates the research examines different types of cooling towers, their application, efficiency, and working principles, and includes a simulation of flow fields around a cooling tower.
final project1.docx
This document is a research project submitted for a degree in Mechanical and Mechatronics Engineering on cooling towers. It includes 4 chapters that discuss mechanical components, thermal performance testing, and electrical components of cooling towers. The introduction provides background on cooling towers and how they work to remove heat from water through evaporation. It also discusses types of cooling towers, including natural draft and mechanical draft, and covers psychrometrics and heat transfer principles.
project cooling tower.docx
1. The document compares three types of cooling towers - wet, dry, and hybrid - that are used in closed cooling systems for large power reactors.
2. It outlines the procedures for dimensioning each type of cooling tower, including calculating heat and mass transfer, air and water flows, electric power needs, and water loss. Equations used for each type are presented.
3. Results from dimensioning a 100 MW cooling tower of each type for a highland region in Algeria are presented to compare electricity consumption and water loss between the three options.
robotic.docx
The document is a homework assignment submitted by Ahmed Naseh Latif, a student in the 4th stage of the Mechanic and Mechatronic Engineering department at Salahaddin University-Erbil. The assignment asks the student to list 10 applications of robots in real life with pictures. The student provides 10 applications: 1) automated transportation, 2) security/defense/surveillance, 3) robot cooking, 4) medicine, 5) education, 6) home maintenance, 7) dangerous jobs, 8) as a servant, 9) as a friend, and 10) crime fighting. The student includes references from books and articles on the history and uses of robotics.
report project.docx
This document summarizes the types, working principles, and applications of cooling towers. It discusses natural and mechanical draft cooling towers, as well as dry, wet, and hybrid heat transfer methods. The key components and processes of power plants that utilize cooling towers are also overviewed. Different sizes, designs, and environmental impacts of cooling towers are addressed.
robotic lab.docx
There are several main types of proximity sensors:
- Capacitive sensors detect nearby objects by changes in capacitance.
- Inductive sensors detect nearby metallic objects using electromagnetic induction.
- Optical sensors use light beams and detect objects that interrupt the beams, such as photoelectric and photocell sensors.
- Ultrasonic sensors use ultrasonic sound waves to detect nearby objects.
project designa.docx
1. The document describes the specifications and design calculations for a gear box. It includes the input/output speeds and power, gear sizes and ratios, torque and speed calculations, bending stress analysis, and material selection.
2. Stress and wear analyses were performed on each gear to calculate safety factors and select appropriate materials. Grade 3 carburized and hardened steel was chosen for gear 4 to withstand a maximum bending stress of 244,900 psi.
3. Through calculations, the gear box design was determined to safely deliver 16.4 horsepower at 72 rpm output, with an input of 1538 rpm, using gears constructed of materials like grade 2 through-hardened steel to withstand the operating stresses and wear.
ahmed naseh - group B.pdf
1. The document contains calculations of various physical quantities such as displacement, velocity, acceleration, and force as they relate to an object moving in one dimension.
2. Equations of motion are used to calculate the velocity, displacement, and acceleration of the object at various points in time based on its initial position, velocity, and acceleration due to gravity.
3. Values for displacement, velocity, and acceleration are calculated and presented at different points in time during the object's motion.
project cooling towers.docx
1. The cold water basin collects water from the cooling tower and directs it to the sump or pump suction line. It aims to eliminate stagnant water and prevent bacterial growth.
2. Fill materials are a critical component that increase the contact surface between cooling and working media to improve heat transfer efficiency. Film style fills produce thick water strips while splash style fills break up water droplets.
3. Other important components include nozzles to spray water over fills, float valves to regulate water level, and drift eliminators to reduce water loss from the air stream and prevent chemicals from leaving the cooling tower.
Ahmad-Nasih-2.pdf
1. The document provides calculations to determine the costs of various items.
2. It calculates the cost of coffee as $150 for 5 pounds at $30 per pound.
3. It also calculates the cost of oranges as $50 for 10 dozen at $5 per dozen and the total cost of coffee and oranges as $150 + $50 = $200.
PLC 2.docx
1. The document discusses using a PLC to control an asynchronous motor and detect faults. It describes connecting the motor, controller circuit, and power circuit. It then replaces the controller circuit with a PLC-based control circuit.
2. Ladder logic programming uses contacts to represent reading bits of input memory and coils to represent writing bits of output memory. This mimics electromechanical relays. Modern PLCs use tag names instead of addresses for discrete I/O points.
3. Overcurrent relays are not well-suited for transmission line protection due to varying fault currents and relative magnitudes of minimum faults and full load. Directional relays are used with overcurrent relays where directionality
automotive lab 3.docx
An exhaust gas analyzer measures carbon monoxide and other gases in vehicle exhaust to determine if combustion was correct. It uses infrared or chemical sensors approved for vehicle inspections. The document discusses measuring the lambda coefficient to evaluate combustion efficiency, with values above or below 1 indicating lean or rich mixtures. Portable emission analyzers are described that can accurately measure exhaust components for compliance or optimization of fuel and air inputs to reduce pollutants.
More Related Content
More from Mahamad Jawhar
ref.pdf
This document discusses refrigeration and its various applications and methods. It begins by defining refrigeration as the process of achieving and maintaining a temperature below surroundings through the removal of heat. The main types of refrigeration are then listed as domestic, commercial, industrial, marine, air conditioning, and food preservation. Various natural and early mechanical refrigeration techniques are described, such as the use of icehouses and evaporative cooling. The ideal vapor compression refrigeration cycle is explained through its four processes. Absorption refrigeration using ammonia-water and lithium bromide-water systems is also summarized. Compressor types including reciprocating, rotary, and centrifugal are defined. Key refrigeration system components and their functions are outlined.
lect 01 (1).pdf
This document provides an introduction to programmable logic controllers (PLCs). It defines a PLC as a specialized computer that monitors processes and controls machinery. The document outlines the history of PLCs in automating factory processes. It also describes the components of a basic PLC system and lists advantages such as flexibility, ease of programming, and reliability compared to traditional relay-based controls.
plasma cutting.pdf
This document discusses the design of a CNC plasma cutting machine. It begins with an introduction to plasma cutting, explaining that plasma cutting uses a high-temperature jet of plasma gas to cut electrically conductive materials like metals. It then provides a flow chart showing the basic components and process of a plasma cutter. The document goes on to discuss the technical details of designing a CNC plasma cutting machine, including the mechanical components, electrical systems, and software setup required to automate the plasma cutting process through computer numerical control.
Grad. Proj. Poster Templete akam.docx
This document appears to be a research project report from Salahaddin University's College of Engineering for the 2018-2019 year. The report was prepared by 4 students and supervised by a faculty member. It includes sections on the introduction, methodology, conclusion, references, and images or figures related to the research project.
project format writting 2.docx
This document appears to be a template for a student project submitted to the Mechanical Engineering Department at Salahaddin University-Erbil in Iraq. The template provides an outline for the typical sections included in an engineering student project paper, such as an abstract, acknowledgements, table of contents, references, etc. It also includes placeholders for the student to include the introduction, methodology, example analysis and design, results and discussion, and conclusion sections. The introduction section provides background on the project and defines the problem statement, objectives and outline. The methodology section details the analysis procedures. The example section applies the methodology to a relevant problem. The results, discussion and conclusion sections present and interpret the findings and link them back to the
PLC4.docx
The document describes a PLC program for controlling a water filling and discharging process in a tank. The program uses two level sensors, one for high level and one for low level, to control a feeding valve and discharge valve. When the low level sensor is triggered, the feeding valve turns on to fill the tank, and when the high level sensor is triggered, the discharge valve turns on to empty the tank. The program is designed to maintain the water level between the two sensor points.
PLC 1 (2).docx
This document summarizes a student project to control a two-directional traffic light using a PLC. It introduces the use of traffic lights to control vehicle and pedestrian traffic. Timers are used to provide time delays to control the light sequences. A ladder logic diagram is programmed with contacts that simulate relays to control the red and green lights for each of the three poles in sequences, with one pole green at a time for a set period before moving to the next pole. The process then repeats continuously to control traffic flow in both directions.
Project Cooling Tower.pptx
This document summarizes different types of cooling towers. It describes how cooling towers work by bringing air and water into contact to reduce the water's temperature through evaporation. It discusses the components of cooling towers, including fill materials, drift eliminators, nozzles, fans, and driveshafts. It also compares crossflow and counterflow cooling towers and how they differ in their water and air flow configurations. Finally, it outlines the differences between factory-assembled and field-erected cooling towers.
final project.docx
This document is a research project submitted in partial fulfillment of the requirements for a degree in Mechanical and Mechatronics Engineering. It contains an abstract, introduction, and 4 chapters that discuss cooling towers, their components, thermal performance testing, and electrical components. The introduction provides background on cooling towers and how they work to lower water temperature through evaporation and heat transfer to the atmosphere. It also discusses prior research on improving cooling tower performance. The abstract indicates the research examines different types of cooling towers, their application, efficiency, and working principles, and includes a simulation of flow fields around a cooling tower.
final project1.docx
This document is a research project submitted for a degree in Mechanical and Mechatronics Engineering on cooling towers. It includes 4 chapters that discuss mechanical components, thermal performance testing, and electrical components of cooling towers. The introduction provides background on cooling towers and how they work to remove heat from water through evaporation. It also discusses types of cooling towers, including natural draft and mechanical draft, and covers psychrometrics and heat transfer principles.
project cooling tower.docx
1. The document compares three types of cooling towers - wet, dry, and hybrid - that are used in closed cooling systems for large power reactors.
2. It outlines the procedures for dimensioning each type of cooling tower, including calculating heat and mass transfer, air and water flows, electric power needs, and water loss. Equations used for each type are presented.
3. Results from dimensioning a 100 MW cooling tower of each type for a highland region in Algeria are presented to compare electricity consumption and water loss between the three options.
robotic.docx
The document is a homework assignment submitted by Ahmed Naseh Latif, a student in the 4th stage of the Mechanic and Mechatronic Engineering department at Salahaddin University-Erbil. The assignment asks the student to list 10 applications of robots in real life with pictures. The student provides 10 applications: 1) automated transportation, 2) security/defense/surveillance, 3) robot cooking, 4) medicine, 5) education, 6) home maintenance, 7) dangerous jobs, 8) as a servant, 9) as a friend, and 10) crime fighting. The student includes references from books and articles on the history and uses of robotics.
report project.docx
This document summarizes the types, working principles, and applications of cooling towers. It discusses natural and mechanical draft cooling towers, as well as dry, wet, and hybrid heat transfer methods. The key components and processes of power plants that utilize cooling towers are also overviewed. Different sizes, designs, and environmental impacts of cooling towers are addressed.
robotic lab.docx
There are several main types of proximity sensors:
- Capacitive sensors detect nearby objects by changes in capacitance.
- Inductive sensors detect nearby metallic objects using electromagnetic induction.
- Optical sensors use light beams and detect objects that interrupt the beams, such as photoelectric and photocell sensors.
- Ultrasonic sensors use ultrasonic sound waves to detect nearby objects.
project designa.docx
1. The document describes the specifications and design calculations for a gear box. It includes the input/output speeds and power, gear sizes and ratios, torque and speed calculations, bending stress analysis, and material selection.
2. Stress and wear analyses were performed on each gear to calculate safety factors and select appropriate materials. Grade 3 carburized and hardened steel was chosen for gear 4 to withstand a maximum bending stress of 244,900 psi.
3. Through calculations, the gear box design was determined to safely deliver 16.4 horsepower at 72 rpm output, with an input of 1538 rpm, using gears constructed of materials like grade 2 through-hardened steel to withstand the operating stresses and wear.
ahmed naseh - group B.pdf
1. The document contains calculations of various physical quantities such as displacement, velocity, acceleration, and force as they relate to an object moving in one dimension.
2. Equations of motion are used to calculate the velocity, displacement, and acceleration of the object at various points in time based on its initial position, velocity, and acceleration due to gravity.
3. Values for displacement, velocity, and acceleration are calculated and presented at different points in time during the object's motion.
project cooling towers.docx
1. The cold water basin collects water from the cooling tower and directs it to the sump or pump suction line. It aims to eliminate stagnant water and prevent bacterial growth.
2. Fill materials are a critical component that increase the contact surface between cooling and working media to improve heat transfer efficiency. Film style fills produce thick water strips while splash style fills break up water droplets.
3. Other important components include nozzles to spray water over fills, float valves to regulate water level, and drift eliminators to reduce water loss from the air stream and prevent chemicals from leaving the cooling tower.
Ahmad-Nasih-2.pdf
1. The document provides calculations to determine the costs of various items.
2. It calculates the cost of coffee as $150 for 5 pounds at $30 per pound.
3. It also calculates the cost of oranges as $50 for 10 dozen at $5 per dozen and the total cost of coffee and oranges as $150 + $50 = $200.
PLC 2.docx
1. The document discusses using a PLC to control an asynchronous motor and detect faults. It describes connecting the motor, controller circuit, and power circuit. It then replaces the controller circuit with a PLC-based control circuit.
2. Ladder logic programming uses contacts to represent reading bits of input memory and coils to represent writing bits of output memory. This mimics electromechanical relays. Modern PLCs use tag names instead of addresses for discrete I/O points.
3. Overcurrent relays are not well-suited for transmission line protection due to varying fault currents and relative magnitudes of minimum faults and full load. Directional relays are used with overcurrent relays where directionality
automotive lab 3.docx
An exhaust gas analyzer measures carbon monoxide and other gases in vehicle exhaust to determine if combustion was correct. It uses infrared or chemical sensors approved for vehicle inspections. The document discusses measuring the lambda coefficient to evaluate combustion efficiency, with values above or below 1 indicating lean or rich mixtures. Portable emission analyzers are described that can accurately measure exhaust components for compliance or optimization of fuel and air inputs to reduce pollutants.
More from Mahamad Jawhar (20)
Recently uploaded
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
Ppt on evs amity University project work.........................??????!?!?!?!!?!!?!!?/?/?/?/?/?
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
IIT毕业证原版定制【微信：176555708】【伊利诺伊理工大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Recently uploaded (20)
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
robotic2.docx
- 1. 1 Helicopter robot Student Name: Muhammad Jawhar Anwar Class: Fourth Stage A1 Lab Name: Exp No: 2 Department: Mechanical & Mechatronics College of Engineering Salahaddin University-Erbil Academic Year 2021-2022
- 2. 2 MY WORK IN ROBOTIC LAB ( ABOUT MY ROBOT) HELICOPTER ROBOT : rotor is rotate by using A DC motor ,and light make on by switch LED, and have a sound by using buzzer ,and we make movement for robot by programing robot by rogic program. This robot going straight ,and rotate clock wise,after that orange LED on and going to backward and rotate anti clock wise ,green LED to be on.
- 3. 3
- 4. 4
- 5. 5
- 6. 6
- 7. 7
- 8. 8
- 9. 9
- 10. 10
- 11. 11