VIP Kolkata Call Girl Howrah 👉 8250192130 Available With Room
Tron sbr
1. TRON SBR
B O N D I N G A D M I X T U R E
A D H E R E T R O N
C O M P L E T E C O N C R E T E P R O T E C T O R
DIESCRIPTION
TRON SBR bonding admixture is styrene butadiene
copolymer latex which is specifically modified to be
compatible with cement bases mixes. It enhances
mechanical properties such as adhesion, flexibility,
compression and impact strength of concrete and
improves the thin section fragility of cement when used as
coating.
Ÿ TRON SBR useful as bonding agent in
construction, repair work
Ÿ Is suitable for use in damp situations.
Ÿ Improves high water resistance to the mix.
Ÿ Improves adhesion, flexibility, workability and
reduce cracking
Ÿ Produces mortar with good strength and
resilience.
Ÿ Imparts good bonding between old and new
concrete.
Ÿ Used along with cement in structural repairs,
water proofing composition and for improvement
in abrasion resistance of flooring.
PRODUCT SPECIFICATION
Nature : Aqueous dispersion of
butadiene ∕ styrene
copolymer
Colour&
Appearance : White Liquid
Solid Content : 30-32 %
PH : 7.0-8.5
Consistency : Free Flowing
Shelf Life : Minimum 12 months in
sealed containers
MIXING RATIO
Bonding Coat : 1 part ADHERE TRON SBR
Mortar : 10-20% by weight of cement
quantity
Flooring screeds : 10-20% minimum by weight
of Cement quantity
Initial Setting Time : 24 Hours
Initial Curing Time : 72 Hours with moist cloth or
water spray
Completecuringtime28 days under water immersion
DIRECTION OF USE
Surface preparation: The surface must be free from dust,
loose particles, oils, grease, mould releasing agents,
fungus, moss, and coating. Clean the surface by scrapping /
sand blasting or grinding. Surface of high suction should be
thoroughly dampened before application of bonding coat.
Bonding coat: To prepare a polymer based bonding coat
take 1 part of TRON SBR : 1 part water : 3 part fresh cement
and mix thoroughly the materials thus mixed form a thick
slurry of a consistency easily applicable by brush. The
slurry thus prepared is ready for use as a bonding material.
The surface on which the bonding coat is to be applied has
to be cleaned with a water jet approximately 24 hours prior
to application. This will help in making the substrata
slightly moist. After application of slurry on the requisite
surface place the next screed or mortar etc. Coverage
approx 4-5 sq. mt. / per litre of TRON SBR.
Polymer Mortar & Floor Screed: For rendering, patching,
and bedding mixes the detail as per the below mention
table
Material Patching & repair Mortars Floor Screed
Plaster for masonry
(Heavy Duty)
Cement 50 kg 50 kg
Zone II Sand 150 kg 70 kg
Granite Chips (3-5mm) ----- 75 kg
TRON SBR 10%-20% (by weight of cement) 10%-20%
Water 10-15 Lt. 8-12 Lt.
Thickness
8-30 mm
10-25 mm
Note: all surface including edges must be primed
All application on wet and bond coat/primer coat must
Not allowed to dry if it dries out it must be removed and re
prime.
Polymer Cement Grout: To prepare polymer modified
cement grout for injection TRON SBR can be used
effectively modify properties of cement grout for crack
injection. The dosage of TRON SBR shall be 10-20% per bag
of cement (50 kg). TRON SBR and water and add this mix to
the cement using a mechanical mixer, slurry of uniform
consistency is formed. Depending upon the various needs
of grout the above proportion of TRON SBR could be
different. The injection is carried out as per the standard
practice.
Cleaning of Tools & Equipment: Tools and equipment can
be easily clean with water.
Safety Precautions: In case of accidental seek medical
advice.
Packing: 20 lrt / pail.
Note: The information submitted in this publication is based our current knowledge
and experience. In view of the many factors that may affect processing and
application these data do not relieve processors of the responsibility of carrying out
their own tests and experiments neither do they simply any legally binding assurance
of certain properties or of suitability of specific purpose. It is the responsibility of
those whom we supply. Our products to ensure that any proprietary right and
existing laws and legislations are observed.
20lrt / Pail MUST BE STORED IN DRY PLACE.
ADHERETRON
COMPLETE CONCRETE PROTECTOR
MALAYSIA
www.adheretron.com.my | e-mail: sales@adheretron.com.my