2. Welcome to the latest edition of our
Construction Accessories Catalogue
Offering you a vast range of top quality, leading
brand, Construction Accessories and supported by our
nationwide branch network.
We’re part of the SIG group, which has recently linked
together its Insulation, Technical Insulation, Fixings,
Interiors and Construction Accessories businesses,
meaning that you can now source a huge range
of products, all from your local SIG Construction
Accessories branch, which means a true “One Stop
Shop” for specialists.
AtSIGConstructionAccessoriesweprideourselveson
theserviceweoffertocustomers.Youcantrustusto
provideafriendly,professionalserviceandfast,
responsivedeliveries,locallyornationally.Ourdedicated
teamareavailablewithexpertproductandapplication
support,includingourspecialistteams:Waterproofing,
MasonryComponents,ConcreteRepairCentreand
GeotechnicalCentre,ensuringyougettherightproducts
fortherightjob,ontimeandwithinbudget.
Providing the complete geotechnical solution, SIG Geotechnical
Centre go beyond system design and product supply. With a
mobile technical sales department to hand, providing free
on-site support and advice, our dedicated
in-house team are trained to
offer the most cost
effective and high
performance systems,
combined with the option for
free PI cover on eligible designs.
The Concrete
Repair Centre offers
specialist support
with expert product
advice and guidance
from one point of
contact and access
to the full range
of your preferred
brands, nationwide.
WATERPROOFING
We have a full range of Waterproofing products featuring the
major brands within our national network of branches.
Our Technical Business
Development team
can assist you with the
correct specification
to ensure all your
requirements are fully
“watertight”.
MASONRY COMPONENTS
Our Masonry components teams can offer technical advice for
various design systems including a project management,
take off and design service. We have
vast experience in supplying a
comprehensive range of products
from Wall Ties and Brickwork
Reinforcement to Masonry Support
and Windpost Systems, we can
offer advice on the best solution
for your building requirements.
4. 4 Concrete Repair & Protection
As distributors for the largest
manufacturers in the concrete repair
market, SIG Construction Accessories
can offer the solution to all your
repair problems. From large scale
renovations and structures, to restoring
kerbs and joint rises, SIG Construction
Accessories will have a product or
system to do the job.
Our range includes:
• Primers & steel protection
• Cementitious repair mortars
• Resin repair mortars
• Crack injection and stitching materials
• Fast setting pavement repairs
• Decorative coatings
• Anti-carbonation coatings
• Concrete resurfacer
PRODUCTS PAGE
Ardex 5
BASF 8
Convergent 10
Everbuild 11
Flexcrete 12
Fosroc 16
Lisochem 29
Ronacrete 30
Sika 36
Weber 41
5. 5Concrete Repair & Protection
Ardex
Ardex A 45 - Internal Repair Mortar
Ardex Ardurapid A 45 is ideal for the rapid
repair of internal concrete, screeds, renders
and concrete steps, it can also be used to
form ramps, fill cracks and make good around
fittings and pipework. Ardex Ardurapid A 45
receives finishes after 90 minutes regardless of
thickness and is slump free, making it ideal for
vertical and horizontal repairs.
Size: 11kg
Ardex A 46 - External & Internal Repair Mortar
Ardex A 46 is a slump free repair and patch
mortar which can be used for both internal and
external repairs to stair treads and risers. It is
also ideal for infilling holes around fittings and
for patch work on wall and floor areas. Ardex A
46 has rapid hardening properties that mean
it is walkable in just 2-3 hours, as well as being
suitable for use below a DPM.
Size: 11kg
6. 6 Concrete Repair & Protection
Ardex PSRS
A two-component epoxy resin designed for
strengthening and restoring poorly compacted
and low strength cement/sand screeds. Ensure
Ardex PSRS is always keyed with Ardex Fine
Aggregate.
Size: 10kg two component tin
Ardex K 301
A fast setting cost effective solution for
smoothing rough or damaged concrete or
cement/sand screeds and is suitable for
internal and external applications prior to tiling.
ARDEX K 301 is walkable after 2-3 hours and
can be tiled onto after 24 hours. Use to level
uneven surfaces, such as paths and patios.
Size: 25kg
Ardex A 35
Used in place of Portland Cement in cement/
sand screeds, Ardex A 35 produces a floor
screed that can be walked on after 3 hours
and is dry enough to receive tiling after 24
hours regardless of thickness. After 1 day the
compressive and tensile strengths of an Ardex
A 35 screed exceed the acceptable minimum
attained by a conventional screed after 28 days.
Size: 25kg
7. 7Concrete Repair & Protection
Ardex A 35 Mix
A blend incorporating ARDEX A35 cement
and graded sands, for the production of rapid
setting and ultra rapid drying floor screeds,
and for large repairs to existing cement/sand
screeds.
After only one day, the compressive and tensile
bending strength of an ARDEX A 35 Mix screed/
repair exceeds the acceptable minimum
attained by an ordinary cement screed after 28
days, and is also dry, irrespective of thickness.
Size: 25kg
Ardex Feather Finish
Ardex Feather Finish drys rapidly and provides
a high bond to concrete, plywood, cement/
sand screeds, existing sub-floor smoothing
compounds and even existing ceramic tiles
without the use of primers. Use Ardex Feather
Finish for patching, filling and feather finishing,
daywork joints, ridges, gouges, depressions,
uneven trowel marks, etc., in the sub-floor, as
smoothing joints between staggered plywood
sheets.
Size: 5kg, 11kg
Ardex
Type Size Coverage
Ardex A 45 11kg 7 litres per bag
Ardex A 46 11kg 8 litres per bag
Ardex PSRS 10kg two component tin Dependent on porosity and depth of the screed
Ardex K 301 25kg 1.6kg/m2
/mm i.e. approx 7.8m2
@ 2mm
thickness/25kg bag
Ardex A 35 25kg approx 2.3m2
per 25kg bag for 30mm 1:4 screed
Ardex A 35 Mix 25kg approx 1.85kg/m2
/mm
Ardex Feather Finish 5kg 4.5m2
@ 1mm thick, 22.5m2
as a scratch coat
11kg 10m2
@ 1mm thick, 50m2
as a skim coat
8. 8 Concrete Repair & Protection
BASF
Emaco®
T545
Emaco T545 is a specially formulated repair
mortar, based on magnesia-phosphate cement
pre-mixed with selected aggregates, which
gives controlled, extremely high early strengths
in temperatures ranging from -20°C (or lower)
up to over 30°C, making it particularly useful in
cold store applications.
It provides a repair material for concrete
slabs which reaches an adequate strength for
trafficking, or other use, at a very early age. It is
also suitable for use as a repair medium at low
ambient temperatures. Used for thicknesses
above 20mm only, for depths of 30mm and
above up to 10kg of 10mm single sized coarse
aggregate may be added.
Size: 20kg
Emaco®
Nanocrete R2
Universal, fast setting, polymer modified, fibre
reinforced repair and levelling mortar Emaco®
Nanocrete R2 is a universal, single component,
polymer modified, fast setting, repair, reprofiling
and levelling mortar.
Emaco®
Nanocrete R2 is a ready-to-use
material that contains special cements, well
graded sands, carefully selected polymers and
fibres to reduce shrinkage and improve physical
and application properties.
When mixed with water, it forms a mortar
with an exceptional wide range of applications.
Emaco®
Nanocrete R2 can easily be hand and
trowel applied in thicknesses from 3 up to
100mm.
Size: 20kg
9. 9Concrete Repair & Protection
Emaco®
Nanocrete R3
Lightweight, polymer modified, fibre reinforced,
structural repair mortar Emaco®
Nanocrete R3
is a single component, lightweight, polymer
modified, high build structural repair mortar.
Emaco®
Nanocrete R3 is a ready-to-use
material that contains Portland cement, well
graded sands, specially selected polymer fibres
and additives.
Applied nanotechnology has been used to
significantly reduce shrinkage.
Emaco®
Nanocrete R3 has been specifically
formulated to produce a mortar with
the compressive strength and modulus
characteristics defined in class R3 of EN1504
part 3.
When mixed with water, it forms a highly
thixotropic mortar that can easily be hand,
trowel or spray applied in thicknesses up to
75mm in one layer. It is particularly suited
to vertical and overhead work where hand-
profiling is required.
Size: 20kg
Emaco®
Nanocrete R4
Extra high-strength, shrinkage compensated,
fibre reinforced, structural repair mortar
Emaco®
Nanocrete R4 is a single component,
extra high-strength, high modulus, shrinkage
compensated structural repair mortar that
meets the requirements of the new European
Norm EN1504 part 3 class R4.
Emaco®
Nanocrete R4 is a ready -to-use
material that contains Portland cement, well
graded sands, specially selected polymer fibres
and special additives to significantly reduce the
risk and incidence of shrinkage cracking.
When mixed with water, it forms a highly
thixotropic mortar that can easily be spray or
trowel applied.
Size: 20kg
10. 10 Concrete Repair & Protection
Emaco®
Nanocrete AP
Single component, cement based, multi-use,
bonding and active protective primer Emaco®
Nanocrete AP active primer, not only reinstates
a high pH environment it also contains active
corrosion inhibiting additives for the protection
of reinforcement steel. It can also be used as an
adhesive bonding slurry for subsequent repair
mortars.
Emaco®
Nanocrete AP is a ready-to-use
material that contains portland cement, well
graded fine fillers, redispersible powder and
special additives.
Whenmixedwithwater,itformsaslurrythatcanbe
appliedbybrushtothecleanexposedreinforcement,
ordirectlyonthedampened,preparedconcrete
substratewhenusedasabondingcoat.
Size: 5 Litres, 15 Litres
BASF
Type Size Coverage
Emaco T545 20kg
Emaco Nanocrete R2 20kg 20kg - 1.3 m2
@10mm thick
Emaco Nanocrete R3 20kg 20kg - 1.4 m2
@10mm thick
Emaco Nanocrete R4 20kg 2kg - per m2
/per mm thick
Emaco Nanocrete AP 5, 15 litres Consumption : 2–3 kg/m2
Convergent
Pentra-Sil®
(NL) HD+C
A water-based, clear, dissipating membrane-
forming curing compound, hardener and
densifier that surpasses ASTM C-309 Liquid
Membrane – Forming Compounds for Curing
Concrete moisture retention requirements.
This single component application forms a
tougher, abrasion resistant surface compared to
traditional methods requiring post-densification
(28 days later). Excellent for commercial and
industrial concrete floors that need long-term
protection against heavy wear and abuse,
moisture, dirt and grime buildup. This earth
friendly / bio based compound contains no
solvents and has a VOC content<100g/L.
Size: 25 Litres, 200 Litres
11. 11Concrete Repair & Protection
Everbuild
Febset 45
Febset 45 is a specifically formulated repair
mortar, based on magnesia-phosphate cement
pre-mixed with selected aggregates, which
gives controlled, extremely high early strengths
in temperature ranging from -20°C (or lower)
up to over 30°C. Febset 45 can be modified
with 10mm aggregate for use in depths over
150mm. It is also suitable for use as a repair
medium at low ambient temperatures.
Size: 25kg
SBR
Bonding and waterproofing admixture to add to
screeds, renders and repair mortar mixes.
Size: 5 Litres, 25 Litres
Everbuild
Type Size Coverage
Febset 45 25kg 11.6 litres
SBR 5 litres,
25 litres
1.2L - 1m2
@12mm thick
12. 12 Concrete Repair & Protection
Flexcrete
Steel Reinforcement Protector 841
Economic, polymer cement coating to
passivate and protect steel reinforcement.
Supplied with a convenient mixing kit. BBA
certified and CE Marked in compliance with
EN1504-7.
Size: 5kg
Monolite
Low density, high yield, shrinkage compensated,
polymer modified cosmetic repair mortar for
concrete, brick or stone. Single component
cementitious formulation, no primer required,
simply mixed with water and easily applied in
single layers up to 100mm. Particularly suitable
for vertical and overhead use. CE Marked Class
R2 to EN1504-3.
Size: 20kg
Monomix
Medium density, multi-purpose structural grade
polymer modified mortar based on Portland
cement and benefitting from shrinkage
compensation and fibre reinforcement. No
primer required other than saturation of
substrate. Simply mix with water and apply by
hand or trowel to achieve 80mm build even
overhead. Special spray grade available. Totally
waterproof under a 100m hydrostatic head and
has DWI Reg 31 approval. BBA Certified and CE
Marked Class R3 to EN1504-3.
Size: 25kg
13. 13Concrete Repair & Protection
Monomix HD
Heavy duty, high strength polymer modified
mortar which is suited for durable structural
repairs as well as heavily trafficked areas. No
primer required, simply mix with water. High
build, up to 80mm in a single layer even when
used overhead. Compliant with Highways
Agency Standard BD27/86, and CE Marked
Class R4 to EN1504-3.
Size: 25kg
Fastfill
Ultra high strength, rapid curing, single
component, polymer modified, Portland
cement based mortar giving fast return to
service. Shrinkage compensated and fibre
reinforced for use in heavy wear applications
including industrial floors, runways, roadways
and footpaths as well as areas subject to early
immersion. No primer required, simply mix
with water. Used from 5mm or up to 300mm
when bulked out with aggregate for filling
of large voids or for bedding applications.
DWI Reg 31 Approved for use in contact with
drinking water, compliant with Highways
Agency Standard BD27/86, BBA certified and CE
Marked Class R4 to EN1504-3.
Size: 25kg
Monolevel
Single component, polymer modified mortars
for rendering and reprofiling of in-situ and pre-
cast concrete and brickwork to produce a high
quality, decorative engineering finish. Mixed
with water on-site and applied by spray, trowel
or bag rubbing techniques. Uses include fairing
coats to fill minor voids and defects on new
and existing structures (Monolevel FC Class R2
EN1504-3), waterproofing of basements and
water tanks including drinking water structures
(Monolevel 844SP Class R4 to EN1504-3) and
waterproof external rendering of brick and
blockwork (Monolevel RM).
Size: 25kg
14. 14 Concrete Repair & Protection
Cementitous Coating 851
Twin component, polymer modified
cementitious coating which produces a
flexible, highly alkaline film for waterproofing
and protecting new and existing structures.
It is particularly effective at reinstating
concrete cover - 2mm is equal to 100mm of
concrete cover. It is fully waterproof against
positive and negative pressure, proven under
a 100 metre hydrostatic head and protects
concrete from the ingress of carbon dioxide
and chloride ions (including de-icing salts).
It has excellent freeze thaw resistance and
can also be used on brickwork and blockwork.
Spray or brush applied, uses include potable
water containment (DWI Reg 31 Approved),
basement waterproofing and chloride
protection for marine and highway structures.
BBA certified and CE Marked in compliance
with EN1504-2.
Other EN1504-2 certified cementitious coatings
include Cemprotec Elastic for cracked concrete,
Cemprotec E-Floor for high performance deck
protection and Cemprotec E942 in areas where
enhanced chemical resistance is required.
Size: 30kg
15. 15Concrete Repair & Protection
Monodex Range
Technically advanced, low VOC, weatherproof
anti-carbonation coatings which are
independently tested to confirm equivalent
protection to an extra 500mm of concrete
cover. Applied over Bond-Prime in two coats,
Monodex Ultra has a 10 year design life with
Monodex Smooth extending to 15 years.
Available in an attractive range of colours to
produce a durable, decorative finish which is
equally suited for repaired structures or in new
construction.
Flexcrete
Type Size Yield Coverage
Repair Mortars
Steel Reinforcement Protector 841 5kg 2.8 litres 45 linear metres of 10mm bar
Monolite 20kg 18.5 litres 1.85m2
@ 10mm thickness
Monomix 25kg 16.5 litres 1.65m2
@ 10mm thickness
Monomix HD 25kg 13.1 litres 1.31m2
@ 10mm thickness
Fastfill 25kg 13.3 litres 1.33m2
@ 10mm thickness
Fairing Coats and Renders
Monolevel FC 25kg 15 litres 5m2
@ 3mm thickness
Monolevel 844SP 25kg 15 litres 5m2
@ 3mm thickness
Monolevel RM 25kg 14 litres 1.4m2
@ 10mm thickness
Waterproofing Cementitious Coatings
Cementitious Coating 851 30kg 16.67 litres 8.33m2
/30kg @ 2mm thickness
Cemprotec Elastic 30kg 18.8 litres 9.4m2
@ 2mm thickness
Cemprotec E-942 30kg 16.2 litres 8.1m2
@ 2mm thickness
Waterproofing Floors
Cemprotec E-Floor 30kg 16.2 litres 8.1m2
@ 2mm thickness
Cemprotec E-Floor HB 30kg 15 litres 5m2
@ 3mm thickness
Cemprotec EF Primer 5, 25 litres 5, 25 litres 3-10m2
per litre
Surface Pre-treatments
Bond Prime 5, 25 litres 5, 25 litres 5m2
per litre
Anti-Carbonation Coatings
Monodex Ultra 15L 15 litres 37.5m2
per pack
Monodex Smooth 15L 15 litres 37.5m2
per pack
All single component Flexcrete mortars require only the addition of clean water. Packs can be split on site for
mixing by volume for economic use.
16. 16 Concrete Repair & Protection
Fosroc
Fosroc offers a comprehensive range of concrete repair products. The
range includes cementitious repair mortars, epoxy mortars, coatings and
crack injection systems. From small patch repairs to complete concrete
rehabilitation, Fosroc has the solution to suit any job.
Renderoc
Cementitious Repair Mortars
Fosroc’s cementitious repair systems include the world-renowned
Renderoc mortars. These are pre-bagged, single component products
available in various grades depending on the application.
Renderoc GP
General purpose concrete reinstatement mortar
which can also be used as a render as well
as all types of patch repairs. It can be applied
up to 20mm thick in overhead and 30mm
in vertical sections. In horizontal applications
100mm thickness can be obtained.
Size: 25kg
Renderoc HB
Single component lightweight fibre and
polymer modified concrete reinstatement
mortar for high build applications. Renderoc
HB can be applied up to 80mm thick in vertical
and 50mm in overhead work without the use
of formwork. Thicker sections can be achieved
by use of formwork or built up in layers.
Thickness range 10mm-50mm.
Size: 18kg
Renderoc S
Structural grade polymer modified concrete
reinstatement mortar. Used for repairs of
large areas of concrete and for localised patch
repairs. The application range is 5-10mm in
vertical and 5-100mm in horizontal situations.
Size: 25kg
17. 17Concrete Repair & Protection
Renderoc LA
Single component free-flowing low alkali micro-
concrete. The product is highly fluid and obviates
the need for compaction and vibration where
access is restricted or reinforcement congested.
Renderoc LA is ideal for the reinstatement of
large structural sections of concrete.
Size: 25kg
Renderoc LA55
Low alkali, high performance micro-concrete for
the reinstatement of large, structural sections
of concrete. Renderoc LA55 is BBA accredited,
cert no. 98/3461.
Size: 25kg
Renderoc DS
Polymer modified dry spray repair mortar. DS is
designed for large area repairs such as bridges,
tunnels, retaining walls, dams etc. Complies
with DTp specification series 1700.
Size: 25kg
Renderoc HB30
Renderoc HB30 has been specifically
engineered for vertical and overhead repair
work. It can be applied in sections up to 60mm
thickness in vertical locations and up to 40mm
thickness in overhead locations in a single
application and without the use of formwork.
Thicker sections can be achieved by the use
of formwork or can be built up in layers. Deep
pockets can sometimes be filled in a single
application dependent on the configuration
of the pocket and the volume of exposed
reinforcing steel. High performance fibre
reinforced lightweight concrete reinstatement
mortar conforming to the requirements of
BS EN1504-3 Class R3.
Size: 22kg
18. 18 Concrete Repair & Protection
Renderoc HB45
High performance fibre reinforced medium
weight concrete reinstatement mortar. For the
reinstatement of reinforced concrete where
low permeability characteristics are required
and where higher compressive strength is
a consideration. Renderoc HB45 has been
specifically developed for the repair of columns
and beams, but because of its medium fresh
wet density, is also suitable for soffit repairs.
Size: 25kg
Renderoc RP252
Cementitious mortar for re-profiling concrete
structures. It can be used either to produce a
fair-faced finish in preparation for a protective
coating (see Dekguard range) or as a protective
mortar layer. Renderoc RP252 can also be used
to render large sections of concrete. Renderoc
RP252 is BBA accredited, cert no. 98/3461.
Size: 3.4 litre & 20kg bag
Renderoc FC
Cementitious fairing coat for filling blowholes
prior to coating. It is designed for vertical and
overhead use to infill honeycombing and voids
up to 3mm deep in the surface of concrete.
Renderoc FC must be overcoated. Renderoc FC
is BBA accreditied, cert no. 98/3461.
Size: 25kg
Renderoc MB50
For the reinstatement of reinforced concrete where low permeability characteristics are required
and where high compressive strength is an important consideration. Renderoc MB50 has been
engineered for the repair of columns and beams but, because of its medium fresh wet density,
is also suitable for soffits and other overhead repair work. The mortar can also be used for small,
localised patch repairs.
Size: 25kg
19. 19Concrete Repair & Protection
Renderoc
Type Size Coverage (Approx)
Renderoc GP 25kg bag 1.6m2
@ 10mm thickness
Renderoc HB 18kg bag 1.5m2
@ 10mm thickness
Renderoc S 25kg bag 1.2m2
@ 10mm thickness
Renderoc LA 25kg bag 12 litres/25kg bag
Renderoc LA55 25kg bag 12 litres/25kg bag
Renderoc DS 25kg bag 2m2
@ 10mm thickness
Renderoc HB30 22kg bag 1.5m2
@ 10mm thickness
Renderoc HB45 25kg bag 1.4m2
@ 10mm thickness
Renderoc RP252 Kit 3.4 litre liquid + 20kg bag 2.4m2
@ 5mm thickness
Renderoc FC 25kg bag 5m2
@ 3mm thickness
Renderoc MB50 25kg bag 1.4m2
@ 10mm thickness
Renderoc Primer 4kg Part A, 1 litre Part B
20kg Part A, 5 litre Part B
2.5 litres - 5m2
13 litres - 26m2
Nitocote EP403
Nitocote EP403 is a damp-tolerant protective
coating for concrete and mild steel. The cured
film is corrosion, chemical and abrasion
resistant and is suitable for application
to sewage works, marine environments,
basements and tunnels. It is particularly useful
where concrete surfaces are damp and cannot
be dried out.
Size: 2.5kg
Nitocote EP405
Nitocote EP405 is a solvent-free epoxy resin
coating used for lining and waterproofing
potable water retaining structures and surfaces
subject to contact with foodstuffs. The cured
film is corrosion, chemical and abrasion
resistant and is suitable for application to
tanks, silos, reservoirs, water treatment
works, breweries, dairies and meat and food
processing plants. Nitocote EP 405 is a WRAS
approved product. Available in two colours, blue
and white.
Size: 2.5kg
20. 20 Concrete Repair & Protection
Nitocote EN901
Nitocote EN901 is a solvent-free epoxy resin coating with high chemical resistance. It is used
to protect to concrete and steel structures in aggressive chemical immersion conditions. The
material is particularly suitable for applications in process plants and sewage works.
Size: 4 Litres
Nitocote SN502
Nitocote SN502 is a high performance
silane-siloxane treatment for concrete and
masonry. It is used to protect concrete
structures from attack by chloride ions and
water. SN502 is suitable for all types of
structures, including those in coastal areas.
Size: 25 Litres, 200 Litres
Nitocote SN511
Nitocote SN511 is a high performance water repellent treatment specifically used for protecting
reinforced concrete roads and bridges. SN511 is DTp specified and protects concrete from water
and chloride ingress whilst still allowing it to breathe.
Size: 25 Litres
Fosroc Nitocote
Type Size Coverage
Nitocote EP403 2.5kg packs (1.5 litres) 3m2
per kg per coat (5m2
per litre)
Nitocote EP405 2.5kg packs (1.5 litres) 3m2
per kg per coat (5m2
per litre)
Nitocote EN901 4 litres 10m2
Nitocote SN502 25, 200 litres 5m2
per litre per coat
Nitocote SN511 25 litres 0.3 litres/m2
per coat (minimum)
21. 21Concrete Repair & Protection
Galvafroid
Galvafroid is an anti-rust coating for iron and
steel. It is cold-applied by brush or roller and is
used for the protection of structural steelwork,
agricultural and construction plant, gates,
railings, iron pipework and in-situ weldings.
Galvafroid is grey in colour and can be used as
a self-finish or as a durable anti-rust coating
beneath selected top coats.
Type Size Coverage
Galvafroid 400ml, 800ml, 1.9 litre 16m2
/litre when used as a primer
8m2
/litre when used as a self-finish
Paveroc
Reinstatement Mortar for large area repairs
of concrete pavements and floors to avoid
the total replacement of bays. Can be used
internally or externally in thicknesses between
12mm and 100mm in a single application.
Primer for Paveroc is Nitobond EP.
Type Size Coverage
Paveroc 25kg 0.9m2
@ 12mm
thickness
Nitobond EP 2.5, 4.5kg 2m2
per kg
Patchroc GP
Emergency fast setting repair mortar for
concrete pavements and floors can accept
traffic in 2hrs. For use at depths from 12mm
to 100mm in a single application and a
maximum bay size of 4m2
. Needs priming
with Nitobond AR for pedestrian traffic, and
Nitobond EP for vehicular traffic.
Type Size Coverage
Patchroc GP 25kg 1m2
@ 12mm
thickness
Nitobond AR 1, 5, 25 litre 6.8m2
per litre
Nitobond EP 2.5, 4.5kg 2m2
per kg
22. 22 Concrete Repair & Protection
Nitomortar Resin Repair Mortars
Fosroc has a range of epoxy and polyester reinstatement mortars for jobs
where high strength is required quickly. These include:
Nitomortar HB
Lightweight chemical resistant epoxy mortar for
vertical and overhead applications, thickness
range 10mm-50mm.
Size: 2.9kg, 9.3kg
Nitomortar S
High strength, chemical resistant epoxy mortar,
ideal for industrial floors, tanks and sea walls,
thickness range 5mm-50mm.
Size: 5kg, 16kg
Nitomortar FC
Epoxy fairing coat for filling blowholes and surface preparation. Chemical resistant.
Size: 1kg
Nitomortar PE and PE Concrete
Multi-purpose, rapid setting polyester mortar for
precast units and universal repair, particularly
kerbs. Nitomortar PE is the standard material
for general purpose use and Nitomortar PE
Concrete is a special grade allowing users to
add suitable aggregate, thereby substantially
reducing the cost of infilling larger voids. Both
grades are chemical resistant.
Size: PE 14kg, PE Concrete 11kg
23. 23Concrete Repair & Protection
Nitoprime 25
Suitable for priming concrete surfaces prior
to the application of any of the Nitoflor
SL2000/4000, TS / TF range of resin based floor
toppings, Nitocote range of protective coatings
or Nitomortar range of epoxy repair mortars.
Sizes: 1 Litre, 4 Litres
Fosroc Nitomortar
Type Size Coverage
Nitomortar HB 2.9, 9.3kg 2.5, 8 litres
Nitomortar S 5, 16kg 2.5, 8 litres
Nitomortar FC 1kg 0.6 litres
Nitomortar PE 14kg 7.5 litres
Nitomortar PE Concrete 11kg 15 to 27.5 litres
Nitroprime 25 1 litre, 4 litres 5.5 - 6.5m2
/ltr
24. 24 Concrete Repair & Protection
Nitokit Crack Injection
Fosroc supplies crack injection systems for minor concrete repairs, ideal for
in-situ or precast concrete. These are available as pre-packaged kits for fast
and easy application or as standalone injection grouts for bespoke repair.
Nitokit LV/TH
Pre-packaged, thixotropic epoxy crack injection
resin, suitable for open-ended cracks where
depth and quantity needs to be controlled.
The Nitokit systems are ideal for small scale
repairs on and are also suitable for the insitu or
precast concrete elements.
Nitokit LV/TH
Contents
12 cartridges - 0.25 litre of mixed resin
30 injection nipples
6 hoses
4 air release pins
6 mixing rods*
*Supplied in Nitokit TH only
Accessory pack
Contents
1 injection gun
1 plastic bucket
10 pairs disposable gloves
2 pairs goggles
1 x 5 .5 litre pack Nitokit Surface Sealant
25. 25Concrete Repair & Protection
Nitofil LV
Low viscosity epoxy resin injection grout for
cracks between 0.25mm and 9mm where both
sides of the crack can be sealed against resin
drainage.
Size: 3 Litres
Nitofil TH
Thixotropic epoxy resin injection grout for
cracks between 0.5mm and 9mm where both
sides of the crack cannot be completely sealed.
Size: 1 Litre
26. 26 Concrete Repair & Protection
Fosroc Primers and Bonding Agents
Nitobond AR
Curing membrane for Renderoc system and
primer for Renderoc S and Patchroc GP.
Size: 5 Litres, 25 Litres
Nitobond HAR
Concrete bonding agent, used as primer for
Renderoc HB, HB25, HB40 and GP.
Size: 5 Litres, 25 Litres
Nitobond SBR
Additive for improving mortars for
waterproofing repairs. Also used as a bonding
agent for slip bricks, ceramic tiles etc.
Size: 5 Litres, 25 Litres, 210 Litres
Nitobond EP Standard
Used for bonding old to new concrete. Also
primer for Patchroc / Paveroc and Renderoc
cementitious systems.
Size: 2.5kg, 4.5kg
27. 27Concrete Repair & Protection
Nitoprime Zincrich Plus
Epoxy zinc primer used as anti-corrosion
coating for exposed steel reinforcement in
concrete repairs.
Size: 800ml, 1.9 Litres
Fosroc Primers and Bonding Agents
Type Size Coverage
Nitobond AR 5, 25 litre drums 4-6m2
/litre*
Nitobond HAR 5, 25 litre drums 4-6m2
/litre*
Nitobond SBR 5, 25, 210 litre drums
Nitobond EP Standard 2.5, 4.5kg packs 5m2
, 10m2
Nitoprime Zincrich Plus 800ml, 1.9 litre 7.4m2
per litre
*HAR/AR as primers, usage varies in other applications.
Fosroc Coatings
Fosroc’s durable and attractive
coatings are designed to perform
in harsh environments and are
chemical, abrasion and carbonation
resistant.
Dekguard W
Dekguard W water-based coloured coating
protects exposed reinforced concrete structures,
cementitious substrates and masonry from
aggressive elements, weathering and rain. It
is suitable for use on all types of structures,
including those in coastal environments.
Available in a wide range of colours. Dekguard
W is BBA accredited, cert no. 98/3461.
Size: 10 Litres
28. 28 Concrete Repair & Protection
Dekguard S
Dekguard S is a high performance coating for exposed concrete and masonry that provides
outstanding resistance to aggressive elements, UV light and rain. Available in a wide range of
colours. Dekguard S is BBA accredited, cert no. 98/3461.
Size: 10 Litres
Dekguard Elastic
Dekguard Elastic is a water-based coloured
elastomeric coating for exposed concrete
and masonry. It provides excellent elongation
and recovery, low dirt pickup, resistance
to aggressive elements, UV light and rain.
Available in a wide range of colours. Dekguard
Elastic is BBA accredited, cert no. 98/3461.
Size: 10 Litres
Dekguard Textured
Dekguard Textured is a textured weather-resistant coating for exposed concrete and masonry. It
provides low dirt pick-up, resistance to aggressive elements, UV light and rain. Available in a wide
range of colours.
Size: 10 Litres
Dekguard E2000
Crack-accommodating elastomeric protective coating for reinforced concrete structures.
To protect atmospherically exposed reinforced concrete structures from attack by acid gases,
chloride ions, oxygen and water, especially where there is a danger of subsequent cracks
appearing within the substrate. Dekguard E2000 is suitable for use on all types of structures,
including those in coastal environments.
The Dekguard E2000 system comprises a single component penetrating primer and a single
component elastomeric pigmented coating, both ready for immediate site use.
Size: 10 Litres
Dekguard Primer
A reactive silane-siloxane treatment for use with Dekguard products.
Size: 25 Litres
29. 29Concrete Repair & Protection
Nitoprime DG
Primer specifically for use with Dekguard Elastic.
Size: 25 Litres
Fosroc Coatings
Type Size Coverage
Dekguard W 10 litres 2.75m2
/litre
Dekguard S 10 litres 3m2
/litre
Dekguard Elastic 10 litres 1.25m2
/litre
Dekguard Textured 10 litres 2m2
/litre
Dekguard E2000 10 litres 2.5m2
/litre
Dekguard Primer 25 litres 2.5m2
/litre
Nitoprime DG 25 litres 2.5m2
/litre
Lisochem
LisoTop OWRTM
Anti Graffiti Coating
A high performance water-based
Silane-Siloxane Fluorinated polymer designed
to give superior oil and water repellence with
anti-graffiti properties to all interior and exterior
concrete and masonry surfaces (i.e. bricks,
natural stone, etc).
Solvent Free.
LisoTop CTM
Surface Protection
A high performance product dedicated to
concrete & alkali surfaces. This water based
formula provides a durable transparent
protection against water, oil, grease, etc.
Solvent Free.
30. 30 Concrete Repair & Protection
Ronacrete
RonaBond Concrete Cover 150
RonaBond Concrete Cover 150 is an
enhancement barrier and coating system for
concrete. Two coats creates an equivalent
concrete thickness of 150mm to protect
reinforcing steel and extend the life of
reinforced concrete.
Size: 19kg
RonaBond pre-packed concrete repair mortar
RonaBond Concrete Repair Mortar is a general
purpose British Board of Agrement approved
prepacked concrete repair mortar for repairing
concrete and protecting reinforcing steel. The
repair mortar will have “at least the life of the
surrounding concrete” (BBA Cert. 90/2421), is
suitable for structural repairs and is waterproof,
frost proof and very durable.
Size: 25kg
RonaBond HB40/HB25
RonaBond HB40 is a pre-packed high build,
high strength concrete repair mortar for
repairing concrete and protecting reinforcing
steel. It is used to repair concrete on vertical
surfaces and is particularly suited to the repair
of overhead concrete where ease of application
is as important as high strength. It can be
applied in thick-section layers up to 75mm on
walls and soffits, without shuttering.
Size: 13 Litres
31. 31Concrete Repair & Protection
RonaBond HB25
RonaBond HB25 is a pre-packed mortar used
for repairing concrete on vertical and overhead
surfaces where ease of application is as
important as high strength. It can be applied in
relatively thick section to walls and soffits and
depending on the nature of the repair, in layers
up to 75mm deep in pocket repairs. RonaBond
Lightweight Repair Mortar is supplied pre-
packed requiring only the addition of water.
Size: 18kg
RonaBond Concrete Repair Mortar
RonaBond Concrete Repair Mortar is a general
purpose British Board of Agrement approved
pre-packed concrete repair mortar for repairing
concrete and protecting reinforcing steel. The
repair mortar will have “at least the life of the
surrounding concrete” (BBA Cert. 90/2421), is
suitable for structural repairs and is waterproof,
frost proof and very durable.
Size: 25kg
32. 32 Concrete Repair & Protection
RonaBond Easy Skim FC
RonaBond Easy Skim FC is a pre-packed
polymer modified mortar which is applied as a
skim coat in thicknesses up to 3mm to provide
a smooth, hard finish to damaged, blemished
and repaired concrete surfaces. RonaBond Easy
Skim FC is also used as a levelling mortar prior
to the application of protective coatings and
paints. It can also be used to give a “harder
than plaster” finish to walls. The material can
be mixed by hand or machine.
Size: 25kg
Ronacrete
Type Size Coverage
RonaBond Concrete Cover 150 19kg 7.6kg per m² for 2 coats
RonaBond pre-packed concrete repair mortar 25kg Yield - 90 packs per m³
RonaBond HB40 13 litres 1m²@13mm
RonaBond Lightweight Repair Mortar 18kg 1m²@15.5mm
RonaBond Concrete Repair Mortar 25kg 1m²@11mm
RonaBond Easy Skim FC 25kg 6.5m²@2mm
Ronacrete Standard Primer 2kg, 10kg 2kg 3-4m² per coat/10kg 15-20m² per coat
Ronafix Pre-packed Bedding Mortar
Ronafix Pre-packed Bedding Mortar is a high
strength pre-packed polymer modified mortar
for bedding brick slips and bonding copings
and other building components to concrete and
suitable building surfaces. It is strong, durable
and resistant to water and frost attack.
Size: 25kg
Type Size Coverage
Ronafix Pre-packed Bedding Mortar 25kg -
Ronacrete Standard Primer 2, 10kg 2kg 3-4m2
per coat/10kg 15-20m2
per coat
33. 33Concrete Repair & Protection
RonaRoad Manhole Mortar
A zero VOC pre-packed ready to use mortar. It
achieves a compressive strength in excess of
the Highways Authority Specification just 1
hour after mixing can be applied at low and
sub-zero temperatures down to –10°C.
• Bedding mortar for manhole frames and
brickwork
• Open to traffic in 1 hour
• Performs below freezing and down to –10°C
• Compressive Strength @ 1 hour 30N/mm²
• Compressive Strength @ 24 hours 48N/mm²
• Compressive Strength @ 28 days 70N/mm²
• Working time 10 minutes Initial set 13
minutes
• Density 2,400kg per m³
Size: 25kg
RonaRoad Manhole Concrete
A zero VOC pre-packed ready to use concrete.
It achieves a compressive strength in excess
of the Highways Authority Specification just 2
hours after mixing, can be mixed and applied
at low and sub-zero temperatures down to
–10°C.
• Bedding and haunching concrete for
manholes
• Open to traffic after only 2 hours
• Suitable for rapid raising and bedding of
manhole covers and ironwork
• Compressive Strength @ 2 hours 23N/mm²
• Compressive Strength @ 7 days 53N/mm²
• Compressive Strength @ 28 days 57N/mm²
• Working time 10 minutes Initial set 13
minutes
• Density 2,400kg per m³
Size: 25kg
34. 34 Concrete Repair & Protection
RonaFloor Repair 1 Hour 6-50mm
A prepacked rapid hardening polymer modified
mortar which reaches high early strength.
The repaired surface can be opened to heavy
vehicular traffic after 1 hour, can be used from
6-50mm and down to a temperature of –10°C.
• Emergency repairs to factory, warehouse
floors, ramps and aisles, runways, airport
pavements
• Rapid strength gain bedding mortar for bricks,
blocks, pavers, in early and emergency traffic
locations
• Roads, carriageways, hard standings,
platforms, stairs, bridges, tidal zone repairs
• Fast – can be trafficked after 1 hour @ 20ºC
• Waterproof and frost proof
• Water based low odour formulation
• Can be overlaid with impervious floor
coverings within 90 minutes
Size: 25kg
RonaRoad/ RonaFloor
Type Size Yield per Pack
RonaRoad Manhole Cover 25kg 11 Litres
RonaRoad Manhole Concrete 25kg 11 Litres
RonaFloor Repair 1 Hour 6-50mm 25kg 100 packs per m³
35. 35Concrete Repair & Protection
Ronafix Mix Design
Application Mix Thickness/notes
Floor screeds and screed repairs A 6mm - 50mm
Floor screeds and screed repairs A1 26mm+
Floor toppings and topping repairs B 15mm - 25mm
Floor toppings and topping repairs B1 26mm+
Floating floor screeds F 35mm+
Concrete repair D over reinforcing steel
Concrete repair A no reinforcing steel
Renders E watertight and tanking
Renders A waterproof
Bedding brick slips, copings C 6mm - 12mm typical
Fine concretes G 25mm+ typical
Slurry coats SC 1mm - 3mm typical
Mix Designs Cement Medium
sharp
sand
6-3mm
granite
chips
10-5mm
pea
shingle
10-5mm
granite
chips
Ronafix Water
(approx)
Yield m3
(approx)
Coverage
(approx)
A By weight 50kg 125kg - - - 9 litres 9 litres 0.1 10m2
@ 10mm
By volume 1 2 - - - 1:1 with water - - -
A1 By weight 50kg 150kg - - - 4.5 litres 14 litres 0.1 10m2
@ 10mm
By volume 1 2.5 - - - 1:3 with water - - -
B By weight 50kg 75kg 75kg - - 9 litres 9 litres 0.1 10m2
@ 10mm
By volume 1 1.25 1.25 - - 1:1 with water - - -
B1 By weight 50kg 75kg - - 75kg 4.5 litres 14 litres 0.1 7m2
@ 15mm
By volume 1 1.25 - - 1.25 1:3 with water - - -
C,D & E By weight 50 kg 125kg - - - 14 litres 4 litres 0.1 10m2
@ 10mm
By volume 1 2 - - - 3:1 with water - - -
F By weight 50kg 150kg - - - 4.5 litres 13.5 litres 0.1 10m2
@ 10mm
By volume 1 2.5 - - - 1:3 with water - - -
G By weight 50kg 100kg - 100kg - 4.5 litres 14 litres 0.14 5.6m2
@ 2.5mm
By volume 1 1.5 - 1.5 - 1:3 with water - - -
Slurry coat By weight 50kg 50kg - - - 35 litres - 0.1 105 - 122m2
By volume 1 1 - - - - - - -
36. 36 Concrete Repair & Protection
Sika
Sika MonoTop 610
A single-component polymer modified cementitious bonding bridge and steel reinforcement primer.
Size: 25kg
Sika MonoTop 612
A cement-based, one-component low-permeability repair microconcrete, containing silica fume
and polymer, thickness range 5mm-30mm.
Size: 25kg
Sika MonoTop 615
A one-component cement based polymer modified high-build repair and re-profiling mortar,
thickness range 3mm-30mm.
Size: 25kg
Sika MonoTop 620
A one-component cementitious polymer modified mortar, thickness range 1.5mm-5mm.
Size: 25kg
Sika MonoTop
Type Size Coverage
Sika Monotop 610 25kg 1.5 - 2kg/m2
/coat
Sika Monotop 612 25kg 2.11kg/m2
/mm
Sika Monotop 615 25kg 1.65kg/m2
/mm
Sika Monotop 620 25kg 2kg/m2
/mm
Sika FerroGard 903
Sika FerroGard 903 is a surface applied migratory corrosion inhibitor, designed for use in
impregnation of steel reinforced concrete.
Size: 25kg
Type Size Coverage
Sika FerroGard 903 25kg 0.5kg/m2
SikaGard 62
Sikagard 62 is a two-component solvent free, high-build coloured epoxy resin coating with high
chemical resistance and approved for use in contact with potable (drinking) water.
Size: 5kg
37. 37Concrete Repair & Protection
SikaGard 63N
A solvent free, two-part epoxy resin coating ideal for bund areas.
Size: 10kg
SikaGard
Type Size Coverage
SikaGard 62 5kg Approximately 0.2 - 0.4kg/m2
SikaGard 63N 10kg 0.3 - 1kg/m2
per coat, dependent on substrate condition and required
coating thickness
Sika Adhesives
Sikadur 31
Two-part epoxy thixotropic adhesive for
bonding building materials. Fast setting and
non-shrinking. For sticking brick slips, bedding
tiles, wood etc. NWC/NRC certified for contact
with potable water. Normal grade (N): for
5-30°C application, Rapid grade (R): for 0-15°C
application.
Size 1.2kg, 6kg
Sikadur 31 GB Rapid
Sikadur 31 GB Rapid is a solvent-free, moisture
tolerant, thixotropic, structural two-part
adhesive and repair mortar, based on epoxy
resins and special sillers, designed for use at
temperatures between +5°C and +20°C.
Size: 1.2kg, 6kg
Sikadur 32
Two-pack solvent free liquid epoxy bonding agent in 1 and 5 kilo packs. For bonding similar and
dissimilar materials, e.g. concrete, metal, stone, glass, wood and asbestos.
Size: 5kg
38. 38 Concrete Repair & Protection
Sikadur 33
Sikadur 33 is a two-component epoxy resin adhesive in a cartridge to fit normal skeleton gun.
Size: 250ml
Sika Adhesives
Type Size Coverage
Sikadur 31 Normal Grade 1.2kg, 6kg 1.65kg/m2
/mm
Sikadur 31 GB Rapid 1.2kg, 6kg 1.65kg/m2
/mm
Sikadur 32 5kg 0.7kg/m2
@ 0.5mm thickness
Sikadur 33 250ml
Sikatop Armatec 110
Anti-corrosive coating for steel reinforcement
prior to concrete repair. For protection against
corrosion.
Size: 20kg
Sikatop 121
Pre-packed ready for use. Adhesive mortar, two-part cementpolymer base used for cosmetic
repairs i.e. blow holes, etc. and also as a bonding bridge.
Size: 10kg, 25kg
SikaTop
Type Size Coverage
Sikatop Armatec 110 20kg 2kg/m2
/coat
Sikatop 121 10, 25kg 2kg/m2
per mm thickness
39. 39Concrete Repair & Protection
Sika Epoxy Mortars and Crack Repair
Sikadur 41CF
Trowel applied epoxy patching mortar in
concrete grey colour. For heavy duty repairs
in damaged and defective areas in concrete,
mortar, screeds, bridge bearings, etc.
Size: 10kg
Sikadur 52
Very low viscosity crack injection non-shrink, solvent-free epoxy, for repair by pouring or injection
into cracks in concrete, also for stabilising lifted screeds. Colour: clear.
Size: 1kg
Sika Epoxy Mortars and Crack Repair
Type Size Coverage
Sikadur 41CF Normal Grade 10kg 2kg/m2
per mm thickness
Sikadur 52 1kg 1.1kg/m2
per mm thickness
Sika Coatings
Sikagard 550 W Elastic
A one-part, elastomeric coating based on UV-curing acrylic dispersion with excellent crack-
bridging properties even at temperatures below 0°C.
Size: 15 Litres
Sikagard ElastoColour 675 W
A one-part, plasto-elastic water dispersed
coating based on a styrene acrylate dispersion
for the protection and enhancement of fair
faced concrete.
Size: 15 Litres
40. 40 Concrete Repair & Protection
Sikagard 680 S Clear Glaze
Colourless material drying to a glossy coat,
suitable as refresher and protective coating for
exposed aggregate concrete.
Size: 20kg
Sikagard 680 S Cosmetic
A one-part solvent containing coating, based on methacrylic resins resistant to weathering,
alkalis and ageing. Sikagard 680 S protects concrete against aggressive atmospheric influences
and promotes a self-cleaning effect on the treated surfaces. It does not adversely influence the
characteristic texture of the concrete.
Size: 30kg
Sikagard 700 S
A one-part water repellent impregnation for absorbent cementitious substrates. It penetrates well
into the open pores of the substrate, providing a durable water repellency, while still allowing
water vapour diffusion in both directions.
Size: 20 Litres
Type Size Coverage
Sikagard 550 W Elastic 15 litres 0.25 - 0.35kg/m2
per coat
Sikagard ElastoColor 675 W 15 litres 0.2 - 0.25kg/m2
per coat
Sikagard 680 S Clear Glaze 20 litres 0.15kg/m2
Sikagard 680 S Cosmetic 30 litres 0.2kg/m2
Sikagard 700 S 20 litres 0.25 litre/m2
41. 41Concrete Repair & Protection
Sika Admixtures
Wintermix
A winter working admixture for concrete. Coverage/usage Approx: 125litres/25kg cement
Sizes: 5 Litres, 25 Litres
Accelerator
Chloride free Sika Accelerator cold weather and rapid hardening admixture for mortars and
concretes. Coverage/usage Approx: 1.5litres/25kg cement
Sizes: 5 Litres, 25 Litres
Weber
The weber.cem concrete repair system is a pre-bagged, multi-component
system based on polymer-modified Portland Cement mortars and
coatings based on acrylic resins.
weber.cem Bondcoat
A single-component polymer-modified,
cementitious bonding aid. It requires only the
addition of clean water to produce a bonding
slurry for weber.cem HB30, weber.cem HB40
and weber.cem lightweight mortars.
This product has been formulated to comply
with the requirements of BS EN1504-3 for a
bonding primer.
Size: 20kg
weber.cem Mortar
weber.cem mortar is a general purpose mortar
for the repair of concrete, to both horizontal
and vertical surfaces. Also available with
cathodic protection.
Size: 25kg
42. 42 Concrete Repair & Protection
weber.cem Lightweight
A polymer-modified cementitious mortar mix,
with specially selected lightweight fillers. It is
pre-blended, contains a polymer powder and
simply requires the addition of clean water to
produce a mortar suitable for both soffit and
vertical repairs in situations where high-build
replacement with conventional concrete is
impractical. High-build up to 75mm in soffit
patch repairs, without formwork.
Size: 20kg
weber.cem HB30 and HB40
Single-component, polymer-modified high
build mortars for replacing defective concrete
with 30N/mm2
and 40N/mm2
compressive
strength, thickness range up to 100mm
vertically and 75mm on soffits.
Size: 20kg
weber.cem Fairing Coat
A single-component, polymer-modified
levelling mortar used to prevent ghosting of
concrete repairs through decorative finishes.
Size: 25kg
43. 43Concrete Repair & Protection
weber.cem Spray DS
A ready-to-use, polymer-modified, cement-
based concrete mix. It contains inert limestone
aggregates and dust suppressants. The
formulation has been designed specially for
dry process spray application to give high
early strength, reduced rebound and maximise
application thickness.
Size: 25kg
weber.tec Bedding Mortar
A two-component, polyester-based mortar for
the bedding and fixing of manhole frames,
airport landing lights, duct frames and precast
concrete units. It has been formulated for
easy mixing and placement, even at low
temperatures, and when cured, provides a
durable, chemically resistant bedding and fixing
material with good bond strength.
Size: 1 resin and 1 hardener, 25kg
weber.cem Pyrapatch
Is a pre-packed product based on hydraulic
cements with specially graded non-reactive
aggregates. The product is polymer-modified
which when mixed with clean water produces a
fast setting repair concrete, suitable for patch or
full depth repairs up to 2m2
.
Size: 25kg
44. 44 Concrete Repair & Protection
weber.cem Pyratop
A rapid-strength gain repair concrete for
thin bond pavement repairs, which is a
pre-packed hydraulic cement-based product
with specially graded aggregates. It exhibits
high early strength, is dimensionally stable and
has excellent abrasion resistance.
Size: 25kg
weber.cem Pyrabed
A cementitious product containing a blend of
special cements and graded aggregates, which
when mixed with water produce fast-setting
bedding mortars for the rapid installation of
ironwork and highway furniture. They can
be applied to depth of 10–100mm in one
pass and the rapid strength development
characteristics allow the road to be opened to
traffic 60 minutes after placement, dependent
on the grade of product selected.
Size: 25kg
Five Star Repair Concrete
A pre-blended cementitious repair concrete
which fully complies with the Highways
Agency Specification for Highway Works and
Department of Transport specification BD
27/86 for a high strength flowing concrete. Also
available with cathodic protection.
Size: 25kg
45. 45Concrete Repair & Protection
weber.tec EP Structural Adhesive
A two-component, bisphenol epoxy resin and
polyamine hardener, highly moisture-tolerant
structural adhesive for structural jointing and
structural strengthening. Used for application
thicknesses of 2–10mm. Conforms with
BS EN1504-4.
Size: 5kg
weber.cem Brushcoat
Is a two-component, SBR Latex-modified,
flexible cementitious coating for brush, spray
or roller application. It is formulated as a
protective, levelling coating to cover non-
structural surface defects in new and old
concrete.
Size: 20kg (15kg bag powder, 5 litre bottle of
SBR latex)
Type Size Coverage
weber.cem brushcoat 20kg plastic bucket; 15kg bag of powder
(Component A)
A + B prduces a yield of 10.8 litres,
sufficient to cover 10m2 per 1mm coat
5 litre bottle of SBR Latex (Component B)
46. 46 Concrete Repair & Protection
weber.tec EP bonding aid
A high-build epoxy resin for priming epoxy
repair mortars for bonding to concrete and
masonry structures. Exceptional bond to
vertical and soffit applications for priming
lightweight repair mortars.
Size: 5.6kg
Weber
Type Size Coverage/Yield
weber.cem Bondcoat 20kg 16.5 litres per 20kg bag
weber.cem Mortar 25kg 1m2
@ 12mm thick - 12 litres
weber.cem Lightweight 20kg 1m2
@ 16mm thick - 16 litres
weber.cem HB30 and HB40 20kg 16 litres per 20kg bag or 6.5m2
per bag at
2mm thickness
weber.cem Fairing Coat 25kg 13 litres per 25kg or 6.5m2
per bag at 2m
thickness
weber.cem Spray DS 25kg approximately 11.5 litres per 25kg bag,
allowance must be made for rebound and
profiling
weber.tec Bedding Mortar 25kg 12 litres per 25kg pack
weber.cem Pyrapatch 25kg approximately 12 litres
weber.cem Pyratop 25kg approximately 12 litres
weber.cem Pyrabed 25kg 12.75 litres per 25kg bag
Five Star Repair Concrete 25kg 12.75 litres
weber.tec EP Structural Adhesive 5 kg 2.9 litres coverage -
weber.cem Brushcoat 20kg Bucket, 15kg Bag plus
5 litre bottle
10.8 litres per 20kg
weber.tec EP bonding aid 5.6kg 1.2m2
- 2.5m2
/kg
47. 47Concrete Repair & Protection
weber.tec EP Mortar
A three-component bulk pack or as a two
component handy pack, consisting of epoxy
resin, hardener and selected graded aggregates
(filler) which when mixed produce a high
strength, impermeable and chemically
resistant mortar.
Size: 26kg
weber.tec Mortar
A three-component bulk pack or as a
two-component handy pack, consisting of
polyester resin, hardener and selected graded
aggregates (filler) which when mixed produce
a high strength, impermeable and chemically
resistant mortar.
Size: 25kg
Weber Resin Repair Mortars
Type Size/Contents Coverage
weber.tec EP Mortar 26kg approx 12.5 litres
weber.tec Mortar 25kg approx 12.5 litres
48. 48 Concrete Repair & Protection
weber.cote coatings
Single-component, acrylic anti-carbonation coatings for the long term
protection of existing concrete and new repairs. Available in clear,
pigmented smooth, flexible and elastomeric versions. weber.cote
coatings are applied by brush, roller or airless spray in two coats.
If stabilisation of the concrete is required prior to application, the
surface should be treated using weber.cote primer (was sealercoat).
The coverage of weber.cote coatings will vary depending on the type of
substrate and the surface porosity. The following is a guide for brush or
roller application two coats on to smooth surfaces.
weber.tec Guard MCI
Is a clear surface-applied corrosion inhibitor
designed to migrate through reinforced
concrete and preserve steel reinforcing bars
embedded in concrete. It forms a mono-
molecular protective layer around the steel
within a week of treatment depending on
the permeability and moisture content of the
concrete.
Size: 20 Litres
weber.cote smooth
External decorative anti-carbonation coating in
a smooth finish.
Size: 15 Litres
49. 49Concrete Repair & Protection
weber.cote EC
Elastomeric flexible anti-carbonation coating
for concrete.
Size: 15 Litres
weber.cote primer
Stabilises and seals substrate prior to
the application of Weber.cote smooth or
Elastomeric.
Size: 5 Litres
Type Size Coverage
weber.tec Guard MCI 20 litres 0.25 litre/m2
weber.cote smooth 15 litres 3 - 6m2
/litre in 2 coats
weber.cote EC 15 litres 1 - 2m2
/litre in 2 coats
weber.cote primer 5 litres 10 - 12m2
/litre
50. 50 Flooring & Tiling
Flooring Treatments
From the simplest floor levelling
compounds to very specialist MMA
products we can offer advice and
support for your project. We supply
products from the leading quality
manufacturers and carry large stocks
for both commercial and industrial
flooring products, to include:
• High early strength and fast drying
cementitious screeds (for both pump and
hand application), levelling compounds, tile
adhesives and screed additives.
• Fast curing, high strength, pre-batched
cementitious and resin based repair mortars.
• Synthetic resin flooring, based on epoxy,
polyurethane and methacrylate systems to
provide sealers/coatings, high build coatings,
multi-layer quartz broadcast systems, flow
applied (self-smoothing) flooring, trowel
applied screed and heavy duty systems.
• Fully compatible surface DPM and bonding
agents for concrete, screeds and resin flooring;
along with surface hardeners, specialist
impregnation and priming systems.
Tiling
Our Tiling products range is based
round the leader in innovation Ardex
UK. Ardex supply everything that the
professional tiler would need.
PRODUCTS PAGE
Flooring & Tiling
Ardex 51
Everbuild 67
Fosroc 68
Instarmac 71
Ronacrete 73
Sika 74
Weber 76
Landscape Products
Everbuild 76
Instarmac 77
RonaDeck 79
Sika 81
51. 51Flooring & Tiling
Ardex
Tile Adhesives
Ardex X 7
Extremely versatile adhesive for internal/
external applications, swimming pools, etc.,
suitable for walls and floors.
Size: 20kg
Ardex X 7 G Plus
Ardex X 7 G Plus is specifically formulated to
have a very high yield per bag (Ceram Research
has confirmed approximately 20% more
coverage per kg compared to traditional tile
adhesives) along with enhanced properties of
adhesion and flexibility. Ideal for fixing fully
vitrified or porcelain tiles (internal areas only)
and other tiles with low porosity as well as
glass and porcelain mosaics without the need
for an admixture.
Size: 18kg
Ardex X 7 R / X 7 R W
Use with all tile types including fully vitrified,
porcelain and mosaics. For internal and
external applications including swimming
pools, etc. Suitable for walls and floors, with
built-in admix. Tiles can be grouted and
trafficked only 2 hours after fixing.
Available in white and grey.
Size: 20kg
52. 52 Flooring & Tiling
Ardex S 16 / S16 W
White or grey rapid hardening and drying wall
and floor adhesive for fixing ceramic and natural
stone tiles, glass mosaics, porcelain and fully
vitrified tiles in internal dry or intermittently
damp locations. Can be grouted or trafficked 2-3
hours after fixing. Ardex S 16 W is ideal for fixing
translucent marble and glass mosaics.
Available in white and grey.
Size: 20kg
Ardex S 20 and S 20 W
Ardex S 20 “fast setting cementitious
adhesive” is classified as C0 F and ARDEX
S 20 W is classified as C2 F “improved fast
setting cementitious adhesive with additional
characteristics” in accordance with BS EN
12004. Ardex S 20 is a special rapid hardening
and drying, cement-based adhesive for fixing
uncalibrated natural stone floor and wall tiles
in internal situations. Tiles fixed with ARDEX S
20 can be grouted and subjected to foot traffic
3 hours after fixing at normal temperatures.
Available in white and grey.
Size: 22kg
Ardex X 32
Natural Stone Adhesive is classified as C2
FTE S1 “improved fast setting cementitious
adhesive with additional characteristics plus
reduced slip and extended open time” in
accordance with BS EN 12004. Ardex X 32
Natural Stone Adhesive is a special rapid
hardening and drying, cement-based adhesive
for fixing natural stone floor and wall tiles and
uncalibrated natural stone floor tiles. It may
also be used for concrete slabs and ceramic
tiles including porcelain tiles in internal and
external situations.
Size: 20kg
53. 53Flooring & Tiling
Ardex X 77 / X 77 W
Exceptionally long open time. Heavier, larger tiles
can be used without slipping. Fibre reinforced,
flexible tile adhesive for internal/external use,
swimming pools, etc., use with all tile types
including fully vitrified, porcelain and mosaics.
Suitable for walls and floors, with built-in admix.
Available in white or grey.
Size: 20kg
Ardex X 77 S / X 77 W S
Fibre reinforced rapid setting adhesive. Tiles
can be grouted and trafficked only 90 minutes
after fixing. Use with all tile types including fully
vitrified, porcelain and mosaics. For internal and
external applications including swimming pools,
etc. Suitable for walls and floors, with built-in
admix.
Available in white or grey.
Size: 20kg
Ardex X 78
A grey MICROTEC fibre reinforced cement based
floor tile adhesive with an extended open time
of up to 60 minutes. It is specifically formulated
to have enhanced properties of adhesion
and flexibility, and its unique semi-pourable
consistency makes it ideal for fixing large
format floor tiles.
Size: 20kg
Ardex X 78 S/ X 78 W S
Fibre reinforced rapid setting floor tile adhesive.
Tiles can be grouted and trafficked 90 minutes
after fixing. For fixing all types of ceramic floor
tiles, mosaics, etc. Its enhanced adhesion
properties and easily workable consistency
make it ideal for solid bedding fully vitrified
and porcelain large format tiles. For internal/
external applications.
Available in white or grey.
Size: 20kg
54. 54 Flooring & Tiling
Ardex X 7001 / X 7001 W
Fibre reinforced pourable adhesive. Specifically
designed for fixing all types of floor tiles,
including porcelain, to various surfaces
including wood-based sheets and boards. Tiles
can be grouted and trafficked 2 hours after
fixing. Ardex X 7001 W white is ideal for fixing
light and translucent marble and limestone.
Available in white and grey.
Size: 20kg
Ardex S 21
For large format tiles. Pourable consistency.
May be used to smooth rough bases and
make up screed levels. For internal/external
applications including swimming pools. Tiles
can be grouted and trafficked 3 hours after
fixing.
Size: 22kg
Ardex D 15
Ardex D 15 is an easy to apply, ready mixed
wall tile adhesive with excellent slump
resistant properties. Used for fixing ceramic
tiles and mosaics to gypsum plaster,
paperfaced plasterboards, concrete cement and
sand renders, as well as for fixing porous bodied
tiles to existing ceramic tiles. Suitable for use
in dry internal locations, as well as in domestic
showers and bathrooms.
Size: 10 Litres
55. 55Flooring & Tiling
Ardex D 20
Ardex D 20 is a ready mixed adhesive for fixing
ceramic tiles and mosaics to all internal walls
in dry or intermittently wet locations, e.g.
domestic showers, kitchens and bathrooms. No
primer required, easy to apply with excellent
slump resistance and offers up to 20 minutes
open time and 40 minutes tile adjustability.
Tremendous adhesion strength and reliability
Sizes: 5 Litre, 10 Litres
Ardex D 30
Ardex D 30 is classified as a D2 TE adhesive to
BS EN 12004. It is a water resistant, non-slip,
ready-mixed wall tile adhesive with an extended
open time. The additional characteristics of
Ardex D 30 are high adhesion strength after
water immersion and high adhesion strength
after exposure to elevated temperatures making
this product ideal for use in commercial and
domestic showers, kitchens and bathrooms.
Size: 10 Litres
Ardex Tile Adhesives
Type Size Coverage
Ardex X 7 20kg 1.3kg/m²/mm of bed thickness
Aredex X 7 G Plus 18kg 1kg/m²/mm of bed thickness
Ardex X 7 R / X 7 RW 20kg 1.4kg/m²/mm of bed thickness
Ardex S 16 / S 16 W 20kg 1.35kg/m²/mm of bed thickness
Ardex S 20 and S 20 W 22kg 1.2kg/m²/mm of bed thickness
Ardex X 32 20kg 1.2kg/m²/mm of bed thickness
Ardex X 77 / X 77 W 20kg 1kg/m²/mm of bed thickness
Ardex X 77 S / X 77 W S 20kg 1.2kg/m²/mm of bed thickness
Ardex X 78 20kg 1.2kg/m²/mm of bed thickness
Ardex X 78 S / X 78 W S 20kg 1.2kg/m²/mm of bed thickness
Ardex X 7001 / X 7001 W 20kg 1.4kg/m²/mm of bed thickness
Ardex S 21 22kg 1.8kg/m²/mm of bed thickness
Ardex D 15 10 Litres (1 Litre per m²) 3mm x 3mm
Ardex D 20 5, 10 Litres 10m² / 10 Litres for 1mm bed thickness
Ardex D 30 10 Litres (1 Litre per m²) 3mm x 3mm
56. 56 Flooring & Tiling
Grouts
Ardex C 2
For joint widths from 2mm upwards, suitable
for wall and floor tiling in internal/external
locations, swimming pools, etc. Available in
6 colours: grey, white, limestone, sandstone,
beige or anthracite.
Sizes: 5kg, 11kg
Ardex-Flex FL
For wall and floor tile joints from 3-15mm
wide in internal/external locations, including
swimming pools. With built-in admix. Available
in 32 colours.
Sizes: 2.5kg, 10kg
Ardex-Flex FS
Water repellent and dirt resistant flexible tile
grout for tile joints up to 4mm wide. Easy
to apply and clean off, suitable for use in
internal/external locations, swimming pools,
etc. Suitable for walls and floors. With built-in
admix. Available in 32 colours.
Size: 2.5kg, 10kg
57. 57Flooring & Tiling
Ardex MG
Ardex MG is suitable for grouting natural stone
or marble wall or floor tile joints up to 8mm
wide. The Ardex MG powder, when mixed with
water, produces a soft, creamy, easily worked
mortar with good filling properties, enabling
deep joints to be filled in one operation. The
hardened grout is suitable for internal use in
intermittently wet conditions. The surface of
the hardened grout has a textured finish and is
not impervious. Available in five colours: light
grey, dark grey, white, limestone and sandstone.
Size: 11kg
Ardex Grouts
Type Size Coverage*
Ardex C 2 5, 11kg 0.25 - 2kg/m2
Ardex-Flex FL 2.5, 10kg 0.4 - 2.2kg/m2
Ardex-Flex FS 2.5, 10kg 0.25 - 2kg/m2
Ardex MG 11kg 0.3 - 14kg/m2
*Depending on tile size and joint width
58. 58 Flooring & Tiling
Sub Floor Smoothing
Ardex K 11
With Ardex K 11, floorcoverings can be applied
the next day, and its rapid hardening properties
mean that it is walkable in 2½ hours. Ardex K 11
is suitable for use over traces of adhesive residues,
and can be applied from 1.5mm-10mm.
Size: 22kg
Ardex K 15
Especially useful where the installation time
of the floor finish must be kept to a minimum.
Ardex K 15 can be applied up to 35mm thick
with the inclusion of Ardex Coarse Aggregate.
Ardex K 15 is rapid hardening, walkable after
2 hours, and regardless of thickness, floor
coverings can be applied the next day. Suitable
for floors with under floor heating.
Size: 22kg
Ardex K 15-HB
Rapid hardening and drying pump or hand
applied levelling mortar which can be tiled on
4 hours after application. Ideal for interior, fast
track tiling.
Suitable thickness 5mm-35mm in one
application.
Size: 25kg
Ardex A 55
Ardex A 55 is extremely quick drying which
makes it ideal for areas that require rapid repair
and renovation work i.e. hospital wards that
need to remain open. The sub-floor is ready to
receive floor coverings after only 1½ hours and
the adhesive can be applied whilst Ardex A 55
is still damp.
Suitable thickness up to 10mm in one
application.
Size 22kg
59. 59Flooring & Tiling
Arditex
For over 40 years Arditex has offered
unbeatable performance. Partially self-
smoothing, floor coverings can be applied after
4 hours and it is suitable for use over most old
adhesive residues, and under DPMs.
Arditex can be applied up to 30mm with the
inclusion of Ardex Coarse Aggregate.
Suitable thickness up to 12mm in one
application.
Sizes: 4.8kg Bottle, 22kg Powder
Arditex NA
Arditex NA is a self-smoothing, protein free,
low odour latex levelling compound. It is
used for the preparation of cement/sand and
concrete screeds, metal, quarry tiles, asphalt
flooring (grade 1), granolithic or terrazzo floors,
prior to applying the floor tiles. May also be
used for pre-smoothing timber floors prior to
oversheeting with plywood and can be used
under a damp proof membrane, such as Ardex
DPM. Also used to encapsulate under-tile
heating cables to concrete, screeds and thermal
tilebacking boards.
Suitable thicknesses up to 12mm in one
application.
Sizes: 4.85kg Bottle, 20kg Powder
60. 60 Flooring & Tiling
Arditex RS Plus
A cost effective, self-smoothing latex levelling
compound with excellent properties of
adhesion and water resistance. It is designed
for use on sub-floors such as concrete, cement
and sand screeds, terrazzo and quarry tiles, etc.
Arditex RS Plus may also be applied to dense
impervious surfaces such as ceramic tiles
and steel sub floors that have been primed
with ARDEX P 82 Primer. Arditex RS Plus can
be laid from a feather edge up to 6mm thick
and to greater thicknesses by incorporating
ARDEX Aggregate. The rapid setting properties
mean a 3mm layer will be ready to receive
floorcoverings after only 6 hours at 20°C.
Sizes: 4.8kg Bottle, 20kg Powder
Ardex Feather Finish
Ardex Feather Finish drys rapidly and provides
a high bond to concrete, plywood, cement/
sand screeds, existing sub-floor smoothing
compounds and even existing ceramic tiles
without the use of primers. Use Ardex Feather
Finish for patching, filling and feather finishing,
daywork joints, ridges, gouges, depressions,
uneven trowel marks, etc., in the sub-floor,
and as smoothing joints between staggered
plywood sheets.
Sizes: 5kg, 11kg Powder
Ardex Subfloor Smoothing
Type Size Coverage
Ardex K 11 22kg bag 1.6kg/m2
/mm
Ardex K 15 22kg bag 1.5kg/m2
/mm
Ardex K 15 HB 25kg bag 1.84kg/m2
/mm
Ardex A 55 22kg bag 1.5kg/m2
/mm
Arditex 4.8kg bottles, 22kg powder 1.9kg of powder/m2
/mm
Arditex NA 4.85kg bottles, 20kg powder 1.7kg of powder/m2
/mm
Arditex RS Plus 4.8kg bottles, 20kg powder 1.7kg of powder/m2
/mm
Ardex Feather Finish 5kg, 11kg bag 50m2
coverage per 11kg bag
61. 61Flooring & Tiling
Fast Track Floor Screeding
Ardex A 35
Used in place of Portland Cement in cement/
sand screeds, Ardex A 35 produces a floor
screed that can be walked on after 3 hours
and is dry enough to receive tiling after 24
hours regardless of thickness. After 1 day the
compressive and tensile strengths of an Ardex
A 35 screed exceed the acceptable minimum
attained by a conventional screed after 28 days.
Size: 25kg
Ardex A 35 Mix
Unique ready-for-use, rapid drying, pre-blended,
screeding and screed repair mortar that just
requires water to produce a screeding mortar
with rapid strength development for receiving
tiling after 24 hours, regardless of thickness.
Size: 25kg
Ardex A 23
A special cement for producing a rapid
hardening floor screed for internal use which
allows ceramic tiles to be fixed after 48 hours,
natural stone after 72 hours, and resilient floor
coverings after 6 days.
Size: 20kg
62. 62 Flooring & Tiling
Ardex A 38
A special cement for producing a rapid
setting, rapid hardening and rapid drying floor
screed. For internal and external use including
swimming pools, allowing ceramic tiles or
stone to be fixed after only 4 hours even on
unbonding floating screeds.
Size: 25kg
Ardex PSRS
A two component epoxy resin designed for
strengthening and restoring poorly compacted
and low strength cement/sand screeds. Ensure
Ardex PSRS is always keyed with Ardex Fine
Aggregate.
Size: 10kg two component tin.
Ardex Fast Track Floor Screeding
Type Size Coverage
Ardex A 35 25kg approx 2.3m2
per 25kg bag for 30mm 1:4 screed
Ardex A 35 Mix 25kg approx 1.85kg/m2
/mm
Ardex A 23 20kg 1:7 mix = 0.27kg/m2
/mm
Ardex A 38 25kg 1:5 mix = 0.31kg/m2
/mm
Ardex PSRS 10kg two component tin Dependent on porosity and depth of the screed
63. 63Flooring & Tiling
Fast Track Industrial Topping
Ardex K 80
Ardex K 80 is a cement based compound for
resurfacing and levelling existing concrete
floors to give a hard, smooth, flat wearing
surface, or as a base. It is suitable for paint and
resin coatings.
Size: 25kg
Ardex SD-T B
Ardex SD-T B is pre-blended with graded
aggregate which gives significant cost savings
on floors that require greater application
thicknesses, and is designed to pre-level
concrete surfaces prior to applying Ardex K 80.
Size: 25kg
Ardex Fast Track Industrial Topping/Wearing
Surface
Type Size Coverage
Ardex K 80 25kg 1.65kg/m2
/mm
Ardex SD-T B 25kg 1.87kg/m2
/mm
Renovation
Ardex K 301
A fast setting cost effective solution for
smoothing rough or damaged concrete or
cement/sand screeds and is suitable for
internal and external applications prior to tiling.
Ardex K 301 is walkable after 2-3 hours and
can be tiled onto after 24 hours. Use to level
uneven surfaces, such as paths and patios.
Type Size Coverage
Ardex K 301 25kg 1.6kg/m2
/mm
64. 64 Flooring & Tiling
Tiling Renders
Ardex AM 100
Specially formulated pre-blended cement/sand
render, requiring only the addition of water to
produce a slump free mortar which can be
applied 2 -20mm and is ready to receive wall
tiling only 2 hours after application.
Type Size Coverage
Ardex AM 100 25kg approx 3.2m2
@ 6mm thick
Primers & Admixtures
Ardex P 4
Ardex P 4 Primer is a ready mixed, rapid drying,
solvent free primer, it’s consistency has been
optimised so that dripping and splashes are
virtually eliminated. It can be used on internal
and external walls, ceilings and floors. It can
also be used prior to the installation of floor
levelling compounds.
Size: 8kg
Ardex P 51
Ideal for a wide range of applications, Ardex
P 51 seals and primes gypsum based plasters
and screeds and minimises air bubbles rising
through levelling compounds and porous
surfaces. Ardex P 51 provides up to 160m2
per
unit and can also be used with Ardex A 35 to
produce a bonding slurry. Usually brush applied.
Size: 15kg, 25kg
Ardex P 82
For use on all dense impervious surfaces,
including hard flooring grade asphalt, ceramic
and quarry tiles and rigid metal sub-floors.
Apply by roller or squeegee.
Size: 2kg, 6kg
65. 65Flooring & Tiling
Ardex E 90
Mortar admix for use with Ardex cement-based
adhesives. Gives elastic and water repellent
properties plus enhanced adhesive strength if
fixing to smooth or glazed surfaces.
Size: 2kg
Ardex E 101
Grout admix for Ardex C 2, F 4 and GK cement-
based grouts and normal cement/sand grout
mortars. For elastic and water repellent tile
joints.
Size: 15kg
Aggregate
A dry, pre-packed 3mm graded aggregate for use with Ardex sub-floor smoothing compounds
where thick applications are required.
Size: 25kg
Ardex Primers & Admixes
Type Size Coverage
Ardex P 4 8kg 40m2
per unit on most typical substrates
Ardex P 51 15, 25kg up to 100m2
per 5kg bottle diluted 1:3
Ardex P 82 2, 6kg approx 30-60m2
per 6kg
Ardex E 90 2kg 3.6kg per 22kg bag of Ardex X 7 / S 16
Ardex E 101 15kg 1kg per 11kg bag of Ardex grout
Course Aggregate / Fine Aggregate 25kg 1m2
@ 20mm thick
66. 66 Flooring & Tiling
Waterproofing
Ardex WPC
A flexible two-component waterproof coating
for use prior to tiling in commercial shower
situations. Also ideal for use on moisture
sensitive backgrounds prior to tiling. Tiles can
be applied just 90 minutes after application of
the second coat.
Size: 5kg Bottle, 5kg Powder
Ardex DPM
A two coat, colour coded, fast curing product
ideal for use on very porous substrates
to prevent pinholing. Can accommodate
Hygrometer readings up to 98% RH.
Size: 6kg, 10kg, 25kg
Ardex DPM 1 C
Provides a surface damp proof membrane
and barrier to rising ground moisture. Easy to
apply, one coat application that guarantees
the early laying of all floor coverings and can
accommodate Hygrometer readings up to
98% RH and has excellent resistance to water,
grease, oil, etc.
Size: 6kg, 10kg, 25kg
67. 67Flooring & Tiling
Ardex DPM 1 C Rapid
A rapid drying, one coat DPM that can be
overcoated after 4 hours making it ideal for
fast track installations. Ardex DPM 1 C R can
accommodate Hygrometer readings up to
98% RH and has excellent resistance to water,
grease, oil, etc.
Size: 6kg, 10kg
Ardex Waterproofing
Type Size Coverage
Ardex WPC Liquid 5kg bottle, Powder 5kg bag 6.6m2
per pack, giving 0.8mm coating (2 coats)
Ardex DPM 6, 10, 25kg 4m2
per kg
Ardex DPM 1 C 6, 10, 25kg 1.8m2
per kg
Ardex DPM 1 C Rapid 6, 10kg 2.5m2
/kg at 250 microns, 1.8m2
/kg at 350 microns
Everbuild
SBR Bond
Bonding and waterproofing admixture to add to
screeds, renders and repair mortar mixes.
Size: 5 Litres, 25 Litres
68. 68 Flooring & Tiling
Fosroc
Floor Coatings & Dryshakes
Nitoflor FC130
High performance water dispersed epoxy
resin floor coating for use where resistance
to oils and liquids is required. Suitable for use
on walls and floors in warehouses, garages,
light industrial and food processing areas,
kitchens and other areas of pedestrian and light
vehiclular traffic.
Size: 5kg
Nitoflor FC140
High performance solvent based epoxy resin floor
coating for use where high chemical resistance is
required. Suitable for use in production assembly
areas, workshops, dairies, soft drinks and bottling
plants, breweries, kitchens, plating shops,
processing plants, dye works, etc.
A fine textured non-slip finish can be achieved
with the addition of nonslip grains to FC 130/140.
Size: 5kg
Nitoflor Lithurin
Hardener and dustproofing compound for
concrete surfaces. Typical applications include
industrial floors, light engineering works,
warehouses, abbatoirs, car parks, dams,
reservoirs, tanks, silos and flues. Nitoflor
Lithurin is a white, soluble, crystalline powder.
When mixed with water and applied to the
floor, the solution penetrates the concrete
reacting with lime and other soluble particles
to form granite hard crystals, leaving a
permanent, hard wearing and dust free surface.
Size: 15kg
69. 69Flooring & Tiling
Nitoflor Hardtop S
‘Dry-shake’ floor hardener for new concrete floors. Nitoflor Hardtop S is a ready-to-use factory
blended powder that is easily trowelled into fresh concrete and cures to provide a dense,
non-porous surface which is extremely hard wearing and abrasion resistant. ideal for industrial
areas with heavy traffic, e.g. power stations, agricultural buildings, warehouses and loading bays.
Size: 25kg
Fosroc Nitoflor
Type Size Coverage
Nitoflor FC130 5kg 35-40m2
pack per coat
Nitoflor FC140 5kg 35-40m2
pack per coat
with nonslip grains - 24-30m2
pack per coat
Nitoflor Lithurin 15kg 1 coat application 200m2
2 coats 150m2
Nitoflor Hardtop S 25kg 5kg/m2
Levelling Compounds
Cemtop S
A self-smoothing cementitious underlayment
for a wide variety of floor finishes, e.g. tiles,
carpets and vinyl sheeting. Suitable for
residential and commercial buildings, for new
construction or refurbishment projects.
Size: 25kg
70. 70 Flooring & Tiling
Cemtop GP30
A general purpose cementitious floor levelling
compound/underlayment for the preparation
of floor surfaces before the application of tiles,
carpet, vinyl, etc.
Size: 25kg
Cemtop GP12
A medium-duty cementitious floor surfacing
system suitable for use in areas which will
be subject to foot traffic or light commercial
use. Also suitable for use as a heavy duty
underlayment for the preparation of floor
surfaces before the application of tiles, carpet,
vinyl, etc.
Size: 25kg
Cemtop XD
A heavy-duty highly abrasion resistant
cementitious floor surfacing system for the
reinstatement of industrial floor surfaces.
Size: 25kg
Fosroc Cemtop
Type Size Coverage
Cemtop S 25kg 1.7kg/m2
/mm thick
Cemtop GP30 25kg 1.7kg/m2
/mm thick
Cemtop GP12 25kg 1.7kg/m2
/mm thick
Cemtop XD 25kg 1.7kg/m2
/mm thick
71. 71Flooring & Tiling
Instarmac
Level IT one HDB: Single-Part Levelling Compound
Level IT one HDB is a single-part cementitious
floor leveller, containing a blend of specially
graded fillers, fine cements and polymers for
smoothing and levelling internal floors with
irregular substrates. Open time 20-30 minutes,
set time 2-3 hours.
Size: 25kg
Level IT two: Latex Levelling Compound
Level IT two is a two-part self-levelling floor
compound that combines excellent flow
characteristics with strong adhesion properties
through the inclusion of a synthetic latex liquid
component.
Level IT two levelling compound is suitable for
use over cementitious floor substrates, hard
adhesives residues, asphalt and timber, and
can also be used under Ultra Floor Damp Proof
Membranes. Open time 20-30 minutes, set
time 2.5 hours.
Size: 25kg Bag plus 5 Litre Bottle
Level IT three: Dual-Component Levelling Compound
An innovative multi-component bag & bottle
system that allows you the choice of Super Dry
or Super Bond characteristics.
Mix with Liquid A for enhanced drying and
2-12mm thickness. Suitable for overlay in just
8-12 hours and ideal for use with underfloor
heating. Mix with Liquid B for these same
features, with the added benefits of improved
flexibility and enhanced adhesion. This mix
will allow laying over old adhesive residues,
and plywood and asphalt.
Size: 20kg Bag plus 5 Litre Bottle
72. 72 Flooring & Tiling
Level IT super30: Self Levelling Compound
Level IT super30 is a two-part rapid setting
self-levelling floor compound designed for
irregular floor substrates. It will allow foot traffic
after only 30 minutes and is ready to receive a
decorative floor covering after 3 hours. Suitable
for use over most rigid and stable cement
based sub-floors.
Open time 5-10 minutes, set time 30 minutes.
Size: 20kg Bag plus 5 Litre Bottle
Level IT HD Top: Self Levelling Topping
Level IT HD Top is a cementitious self-levelling
floor topping designed for warehouse and
industrial floors when rapid strength and
durability are a high priority. It can be pumped
up to 2000m² per day with an application
depth of 5-15mm, providing a highly durable
floor covering that is quick and cost-effective to
apply. Suitable as an open wear layer.
Foot traffic after 2-3 hours, forklift traffic after
36 hours.
Size: 25kg
SmoothFlow: Flowable Levelling Compound
Ultra Floor Level IT SmoothFlow is a
single-part concrete floor levelling compound
which contains a blend of specially graded
fillers, fine cements and polymers for
smoothing and levelling uneven internal floors
prior to the application of decorative floor
coverings.
Level IT SmoothFlow has superior flow
properties which aid fast and easy application.
Suitable for use over most rigid and stable
mineral based sub-floors.
Size: 25kg
73. 73Flooring & Tiling
Ronacrete
Ronafix
A floor screed admixture for thin levelling and
heavy duty wearing screeds and floor repairs.
BBA Approved. For sizes and mix designs refer
to Mix Design table on page 137.
Size: 5 Litres, 25 Litres, 220 Litres
RonaFloor HB200
RonaFloor HB200 is a solvent free high build
epoxy resin floor coating for use on concrete,
screeded and granolithic floors. It provides
excellent abrasion and chemical resistance
for floors subject to constant traffic. Two coats
will provide an easy to clean gloss finish and
achieve a dry film thickness of 400 microns.
RonaFloor EWB
RonaFloor EWB is a water based epoxy resin
coating for use on concrete, screeded and
granolithic floors. It has good adhesion to a
wide variety of substrate to produce a tough,
hard wearing floor finish in a range of colours.
RonaFloor
Type Size Coverage
RonaFloor HB200 5kg, 10kg, 20kg 15m2
per pack per coat - norm 2 coat application
RonaFloor EWB 5kg, 10kg, 20kg 15m2
per pack per coat - norm 2 coat application
74. 74 Flooring & Tiling
Sika
Dryshakes & Resin Flooring
SikaCem 810
SikaCem 810 is a patented one-component water based acrylate bonding agent and integral
mortar admixture. When diluted it produces a gauging solution for improving cementitious mixes.
It should be added to water then mixed with cement and sand/aggregate to produce: Bond coat/
slurry, Pourable micro concrete, renders, screeds with enhanced mechanical properties.
Size: 25 litres.
Sika Dryshakes
Sikafloor-1 MetalTop
One-component ultra tough metallic alloy dry shake hardener for concrete floors, formally
Armorex SuperTop.
Sikafloor-2 SynTop
One-component synthetic aggregate based dry shake hardener for concrete floors formally
Armorex Armorshield.
Type Size Yield per pack
Sikafloor-1 MetalTop 25kg 3.6m2
Sikafloor-2 SynTop 25kg 5m2
Some dry shakes can also be obtained in 1500kg bags.
Sikafloor-156
Sikafloor-156 is a two-part, low viscosity, solvent free epoxy resin for priming concrete substrates,
cement screeds and epoxy mortars.
Type Size Coverage
Sikafloor-156 2.5, 10kg 0.3-0.4kg/m2
Sikafloor-264
Sikafloor-264 is a two-part multi purpose
binder based on epoxy resin. Due to its low
viscosity, highly filled self-smoothing and
broadcast systems as well as textured coatings,
mortar screeds and seal coats can be produced.
75. 75Flooring & Tiling
Sikafloor-2530W
Sikafloor-2530W is a two-part solvent free
coloured water dispersed easily applied epoxy
coating. Can be subjected to normal up to
medium heavy mechanical and chemical
loading.
Sikafloor-81 EpoCem
Sikafloor-81 EpoCem is a three-part, epoxy
modified cementitious, fine textured mortar
for self smoothing floor screeds in thin layers
of 1.5 to 3mm. Use 2mm as a damp proof
membrane or for fast track floor application
onto newer concrete, use primer Sikafloor
155W.
Sikafloor
Type Size Coverage
Sikafloor-264 10kg Roller coat 0.3kg/m2
/coat
Sikafloor-2530W 6, 18kg 0.2-0.3kg/m2
/mm
Sikafloor-81 EpoCem 23kg 2.25kg/m2
/mm
Adhesives
SikaBond T2
High performance one-part elastic bonding
polyurerthane adhesive for the 'Liquid battern'
system of fixing solid wood flooring.
Size: 300ml
76. 76 Flooring & Tiling
SikaBond T54
High build one-part trowel grade polyurethane elastic timber flooring adhesive for bonding solid
wood flooring application by notched trowel.
Size: 13kg
SikaBond
Type Size Coverage
SikaBond T2 310ml 1 x 310cc cartridge per m2
SikaBond T54 13kg minimum 0.6-1kg per m2
Weber
weber.tec acrylic sealer
weber.tec acrylic sealer is a low-viscosity,
colourless, penetrating sealer. The product
is based on a pure acrylic resin in aromatic
solvents. The concept is to achieve an in-
surface seal with no material build up. For
severely exposed surfaces, one coat of weber.
tec aquapel WR prior to two coats of weber.tec
acrylic sealer is recommended.
Type Size Coverage
weber.tec acrylic sealer 5, 25, 200 litre non-returnable drums 4-8m2
per litre in 2 coats
Landscape Products
Everbuild
Geofix
Used for the permanent filling of wide joints
(>5mm) in external paving and stone surfaces.
Available in Buff and Mid-Grey.
Type Size Usage
Geofix 10, 20kg Usage depends on joint size
77. 77Flooring & Tiling
Instarmac
Pro-Bed HS - Fine Bedding Mortar for Paving
A fine bedding mortar manufactured to meet
and exceed the strict requirements of BS 7533.
Meeting these requirements is no easy feat,
which is why Ultrascape provide full current
independent test data from a UKAS accredited
laboratory, to show full compliance. Easy to
use: mix solely with water, and lay at depths of
10-75mm. Its fast strength gain sets it apart
from its counterparts, meaning the area can be
foot trafficked after just 12 hours.
Size: 25kg
Pro-Bed HS ECO - Fine Bedding Mortar for Paving
A fine bedding mortar contianig 20% recycled
glass, manufactured to meet and exceed the
strict requirements of BS 7533. Offering all the
benefits of standard Pro-Bed HS, ECO helps to
significantly reduce the consumption of virgin
aggregate. It is ideal for schemes looking to
achieve an 'excellent' CEEQUAL award, or where
a BREEAM assesment is to be conducted.
Size: 25kg
Flowpoint
A rapid setting flowable grout that exceeds the
requriements of BS 7533. With a proven track
record spanning over 25 years, Flowpoint has
met demands in both heavily trafficked and
domestic paving environments long before the
British Standard was introduced. It is fast and
efficient to apply, affording the ability to grout
large areas of of paving quickly and cleanly,
meaning areas can be open to foot traffic after
just 1 hour.
Size: 25kg
78. 78 Flooring & Tiling
Flowpoint ECO
A rapid setting flowable grout containing
20% recycled glass, that exceeds the strict
requirements of BS 7533. With a proven track
record, Flowpoint ECO has met demands in
both heavily trafficked and domestic paving
environments long before the British Standard
was introduced. It is fast and efficient to apply,
affording the ability to grout large areas of
paving quickly and cleanly, meaning areas can
be open to foot traffic in just 1 hour.
Size: 25kg
Flowpoint Smooth
Flowpoint Smooth is the 3rd variation of
our award-winning flowable grout. Its finish
is ideally suited to smooth paving stones
and slabs providing a seamless surface to
your construction. What's more the product
boasts all the features and benefits of regular
Flowpoint.
Size: 25kg
Cempoint
A gun injected mortar that provides a quick and
clean method of jointing both horizontal and
vertical surfaces (such as cladding). Combines
the benefits of meeting the requirements of
the exacting standards of BS 7533, with the
convenience of being installed using a hand-
held Cempoint Mortar Gun. Please contact
Ultrascape sales on 01827 871871 for gun
enquiries.
Size: 20kg
79. 79Flooring & Tiling
RonaDeck Resin Bonded
RonaDeck Resin Bonded
The RonaDeck system combines a fast curing
resin with natural aggregates to give the look
and feel of loose stones and gravel but without
the inherent mess. The applied surface is safe,
slip resistant "non-slip" and decorative. Can be
used for pedestrian, industrial and traffic areas
giving excellent grip in a variety of colours and
texture.
RonaDeck Resin Bonded Surfacing Grade
RonaDeck Resin Bonded Surfacing Grade is a
fast curing resin bonded aggregate surfacing
systems for providing hardwearing slip resistant
decorative flooring for foot, vehicle and heavier
traffic. They create the look of natural aggregate
without the mess of loose gravel.
RonaDeck Resin Bonded Seal Coat UV
A coating giving increased chemical protection
and easier cleaning with UV light stability.
Size 2kg, 7.5kg, 31kg.
80. 80 Flooring & Tiling
RonaDeck Resin Bonded Steel Primer
A primer for metal substrates.
Size 2kg, 7.5kg, 31kg.
RonaDeck Aggregates
A range of coloured aggregates for the Fast Grip system.
RonaDeck Resin
Type Size Coverage*
Resin Bonded Standard Surfacing Resin 1.95, 7.5, 20kg 1.0-1.8kg/m2
*
Resin Bonded SSurfacing Winter Grade 7.5, 20kg 3.8-4m2
/litre
Resin Bonded Seal Coat UV 5, 25 litre 3-11m2
/litre/coat
Resin Bonded Seal Coat LS 2, 7.5, 31kg
Resin Bonded Steel Primer 5 litre 4-4.5m2
/litre
Resin Bonded XP5 Resin 1.97, 9.5, 19kg 0.8-1.5kg/m2
*
*Depending on aggregate
RonaDeck Eco Tree Pit
RonaDeck Eco Tree Pit System is a UV Stable,
clean, natural aggregate finish surround for
planted trees in public and private areas.
Tree pit aggregates available in various colours
in 25kg pack size, with RonaDeck Eco Tree Pit
Fine Aggregate in a 5kg pack size.
Type Size Yield
RonaDeck Eco
Tree Pit System
1.5, 6kg 0.33m2
@
50mm
81. 81Flooring & Tiling
Sika
Sika Block Paving Seal
Enhances the appearance and provides long
lasting protection for block paving, patio
slabs and concrete. Protects against weather
damage, prevents fungal growth and is oil and
fuel resistant. Normally requires 2 coats, 5 litre
covers 5-8m2
per coat.
Type Size Coverage
Sika Block
Paving Seal
5, 25 Litres 5-8m2
/Litre
Sika Pave Fix Plus
Sika Pave Fix Plus is a ready to use, one-
component self-setting jointing compound
that gives perfect pointing for paving, paths &
patios, and is suitable for wide joint paving and
block sets. Available in Buff and Grey.
Type Size Coverage
Pave Fix 7.5, 15kg
buckets
12.5m2
paving*
per 15kg
*Theoretical consumption based on 450mm x 450mm
slabs with the joints sea led on a ratio of 6mm wide x
25mm deep joints.
Sika Patio Seal
Sealer and appearance enhancer for new and
recently cleaned paving.
Type Size Coverage
Patio Seal 5 Litres 5-6m2
per litre
82. 82 Grouts & Anchors
Precision Grouting
SIG Construction Accessories supply
cementitious, polyester or epoxy
products for the alignment and
levelling and gap filling in the
following and many more applications:
Anchoring & Fixing
We offer products to aid the high
strength and corrosion resistant
anchoring of bolts and bars in concrete.
rock, masonry or brickwork particularly
where speed of installation and early
application of load is required.
Our range includes cementitious,
polyester, epoxy, cartridge systems and
capsules for use in:
• Crane rails
• Capstans
• Landing lights
• Under-rail pads
• Sleeper bearings
• Bridge bearings
• Balustrades
• Crash barriers
• Pump bases
• Sluice Gates
• Machine bedding
• Baseplates
• Anchoring of bolts
• Anchoring of rebar
• Anchoring of dowels
• Fixing of cavity
wall ties
• Fixing to soffits and
walls
• Fixing landing lights
• Fixing of threaded
studs
PRODUCTS PAGE
Cementitious Grouts 83
Epoxy Based Anchor Grouts 88
Cementitious Anchor Grouts 89
Polyester Anchor Grouts 90
Chemical Fixings 92
Steel Anchors 97
Lightweight Anchors 100
83. 83Grouts & Anchors
Cementitious Grouts
Five Star Grout
A standard cementitious grout developed for
applications where an economical grout with
good flow and strength is required. Five Star
Grouts are based on specially selected Portland
cements, graded aggregates and admixtures
including a special form of carbon. This special
formulation produces a grout that conforms
to ASTM C827 Early Volume Change of
Cementitious Mixtures. Does not contain iron,
aluminium or other additives which eliminates
any subsequent problems of dimensional
instability, corrosion or staining. Five Star Grout
is designed primarily as a flowing grout but
can also be used at a trowellable or dry pack
consistency. It can be applied in thicknesses
from 10 to 100mm.
Size: 25kg
Uses:
• Under stanchion plates and machinery
(static loads only)
• Grouting bearings, precast units, floors etc.
• Fixing anchor bolts, ballustrades, crash
barriers, starter bars
• Underpinning
• Void filling
Five Star Grout SP
Five Star Grout SP is a special performance,
higher flow version of the standard grout. It can
be applied in thicknesses from 10 to 50mm. It
has superior properties and complies with HA
Spec 2601.4 for use in bridge bearings.
Size: 25kg
84. 84 Grouts & Anchors
weber.cem Grout HF (High Flow)
weber.cem grout HF is a cementitious,
non-shrink grout developed for applications
where a cost efficient grout with high fluidity
and adequate compressive strength is required.
weber.cem grout HF is designed primarily as a
fluid grout but can also be used at a pourable
or dry pack consistency.
Size: 25kg
Type Size Yield / Coverage
Five Star Grout 25kg 14 litres at pourable consistency
Five Star Grout SP 25kg 14 litres at pourable consistency
weber.cem Construction Grout 25kg 13 litres at pourable consistency
weber.cem Grout HF 25kg 13 litres at pourable consistency
Conbextra GP
General purpose, non-shrink cementitious
grout for gap thicknesses 10 to 75mm.
Recommended applications at flowable
consistency include stanchion base plates,
bolt pockets and void filling. At trowellable
consistency it is recommended for bedding
load bearing components.
Size: 25kg
Yield: 25kg produces 12.5 litres.
weber.cem Construction Grout
weber.cem grout is a premixed non-shrink
cementitious grout developed for applications
where an effective grout with adequate flow
and strength is required. It is designed primarily
as a pourable grout but can also be used at a
plastic or dry pack consistency.
This grout can be pumped or poured and can
be applied in thicknesses ranging from 10mm
to 100mm. It cab be used for many general
purposes.
Size: 25kg
85. 85Grouts & Anchors
Conbextra HF
High flow, non-shrink, cementitious grout for
gap thicknesses 10 to 100mm. Recommended
applications include:
• Large stanchion baseplates
• Joints between pre-cast concrete panels
• Pumped grouting applications
• Grouting applications where pouring access is
restricted
Size: 25kg
Conbextra BB
Non-shrink cementitious bridge bearing grout. Used for grouting beneath bridge bearings, parapet
posts, flanged lighting columns.
Size: 25kg
Conbextra TS
Non-shrink cementitious grout for thick section
grouting of thicknesses 75-500mm. It is
ideally suited to thick section grouting as it
contains aggregates that reduce exothermic
heat generation and risk of thermal cracking
common with gap thicknesses in excess of
100mm.
Size: 25kg
Conbextra UW
Non-shrink cementitious grout for underwater applications.
Size: 25kg
86. 86 Grouts & Anchors
Cebex 100
Expanding and plasticising grout admixture
used with either neat cement or sand and
cement mixes. It is incompatible with High
Alumina Cement.
Size: 227g
Fosroc Cementitious Grouts
Type Size Yield
Conbextra GP 25kg Flowable: 13.25 litres
Conbextra HF 25kg Flowable: 13.25 litres
Conbextra BB 25kg Flowable: 13.5 litres
Conbextra TS 25kg Flowable: 12 litres
Conbextra UW 25kg Flowable: 14.5 litres
Cebex 100 227g 1-2 units per 50kg of cement
Masterflow 765
A ready to use, non-shrink construction grout
for effective contact and support. It can be used
from fluid to plastic consistencies for grouting
of equipment and machinery, bearing pads,
rails and anchoring.
• High early strength for rapid installation and
use of plant
• Durable, uniform dense structure
• Good workability for up to 1 hour at 20C
• Can be applied in thicknesses ranging from
10-75mm
Recommended for:
• Grouting bearing pads and plinths
• Grouting under machinery base plates,
stanchion bases and crane rails
• Anchoring bolts, reinforcing bars and rods
• Underpinning
87. 87Grouts & Anchors
Sika Grout 212
A high strength pre-packed non-shrink
cementitious grout. For grouting bolts, fittings,
anchor bolts, machine beds, chain bolts,
columns, bridge bearings, holes, cavities, etc.
for gap sizes 10 - 75mm.
Size: 25kg
Sika Armorex Construction Grout
A one-component, flowable, general purpose cementitious construction grout for gap sizes
10-100mm.
Size: 25kg
Sika Armorex L2 High Flow
A one-component, high strength, shrinkage compensated cementitious grout for gap sizes
10-100mm. Available in grey only.
Size: 25kg
Sika Cementitious Grouts
Type Size Coverage
Sika Grout 212 25kg 14 litres at pourable consistency
Sika Armorex Construction Grout 25kg 14.2 litres
Sika Armorex L2 High Flow 25kg 13.5 litres
88. 88 Grouts & Anchors
Epoxy Based Anchor Grouts
Epoxy resin grouts for use where
extremely high strength and/or
chemical resistance is required.
Uses include grouting in heavy ma-
chinery, crane and transporter rails,
high speed turbines, drop forges,
refineries, electroplating works and
chemical plants.
Conbextra EP10
Conbextra EP10 is for grouting gap thicknesses
from 0.25 to 10mm. It is an all-liquid system
consisting of a base and hardener.
Size: 3 Litres
Conbextra EPR
Conbextra EPR is for grouting gap thicknesses
from 10 to 120mm and is a three-component
system consisting of base resin, liquid hardener
and specially graded inert fillers.
Size: 8 Litres/ 16 Litres
89. 89Grouts & Anchors
weber.tec EP Pourable Grout
Specially formulated from epoxy resin and
graded aggregates producing materials with
exceptional tough characteristics.
• Capable of withstanding high dynamic loads
• High compressive and tensile strength
• Very good chemical resistance
• Cure within the temperature range 5°C to
35°C
• Negligible shrinkage factor allows use for
underplate or rail grouting.
• Grout remains in contact with the underside
• Can be placed in much thinner sections than
cementitious grouts resulting in cost savings,
chemical resistance, good flow characteristics
and negligible shrinkage
Size: 25kg
Sikadur 42
Pourable epoxy grout. Cures down to 5°C. Fast setting.
Size: 24kg
6 Litres per 12kg
Cementitious Anchor Grouts
BASF Masterflow 885
A non-shrink, metallic reinforced grout for grouting and precision bearing operations where
shrinkage must be eliminated to achieve full bedding and load transfer.
• Turbines, generators and compressors
• Rolling, stamping, drawing and finishing mills
• Paper machine soleplates
• Anchor bolts and rods
• Machinery and equipment requiring high strength maximum bearing
Size: 25kg