1. Page 1 of 3
Resume
Asuthosh Babu Velsuri B.Tech.,
E-Mail: asuthoshbabu@yahoo.com
Mobile: +91 - 9036464304
Objective
To explore and exploit all my potentials in Product service & Testing of Power Electronics, static
converters, Drives products, & systems that extensively uses electrical & automation engineering
and, to grow with the company and lift it to pinnacle of success.
Experience Summary
I am an associate with ABB INDIA Ltd.-LV Drives Division for the last 4 years, prior 2.7 years with
PARKER HANNIFIN INDIA PVT. LTD- SSD Drives Division and 4 more years for SIEMENS Ltd.
My main area of experience has been in AC, DC, SERVO Drives, Static converters, inverters & Power
electronic products.
ORGANISATION : ABB INDIA Ltd.,
DESIGNATION : Testing Manager
Period : from December-2010 to Till Date
Company Profile
ABB is a leader in power and automation technologies that enable utility and industry customers
to improve performance while lowering environmental impact. The ABB formed in 1988 merger
of Swiss and Swedish engineering companies operates in around 100 countries and employs
about 130,000 people. (www.abb.co.in)
Working Responsibilities
Monitoring of Functionality testing of ACS 800, ACS850, ACS 550, ACS M1, Soft starters, DSU, TSU,
ISU, DCS 800 Drives panels.
Conducting functional tests, No load and load tests (Combined full load tests), Short
circuit tests, Heat run tests, Earth fault tests on the drive panels and Megger (IR) tests,
HV Tests on the panels.
Preparing of necessary arrangements for special type tests.
Preparing of daily work schedule as per the work load.
Monitoring of customer inspections.
Ensuring the complete testing process in line with IEC61800-2.
Communicating and controlling of AC & DC drives with PC by using DRIVE WINDOW
and DRIVE WINDOW LIGHT, DRIVE STUDIO, DRIVE AP, software and PLC.
Communication through PROFIBUS, MODBUS and Co De sys (Ver2.3) and Control
Builder 2.2.0V Software.
Preparing of Routine test process instruction for new products and components.
Preparing of Quality approved plan, Factory acceptance test procedures based on the customer requirement
furnished in PO.
Coordinating with Planning and Production dept. in Preparing of monthly revenue draft plan.
Monthly review of COPQ, MOMA, CCRP and FMEA with Quality dept.
2. Conducting internal audits, SOT audits, vendor audit & document preparation for ISO
Page 2 of 3
9001:2008.
Auditing and approving the new vendors and components.
Conducting tests at CPRI, ETDC for different type test approvals like ACBs, Insulators, Busbars, IP
Protection classes etc...
FPY(First Pass Yield) review with subcontractor , Production, Electrical & Mechanical design teams.
Line rejection analysis and corrective action.
Warranty claiming and tracking of faulty modules, failed during testing.
Scheduling of Calibration for various measuring equipment and tools.
Monitoring of employee skill matrix, preparing of Training matrix schedule.
Monitoring of 5S and Safety at LV Drives test field.
Issuing of Routine test certificates and Guarantee certificates.
Achievements & Recognitions
Completed 4Q project (Reducing of panel testing time).
Completed so many CIPs, mostly with waste management.
Member in the interview panel for the campus EDTs recruitment program.
ORGANISATION : PARKER HANNIFIN INDIA Ltd.,
DESIGNATION : Sr. Engineer for Customer service
Period : from MAY-2008 to Till Date
Company Profile
Parker Hannifin India Pvt Ltd, Automation-Group –SSD Drives Division (formerly
Eurotherm Drives Ltd) is a part of automation group of Parker Hannifin Corporation, USA,
who are the global leader in motion and control technologies and systems, it’s one of the Fortune
500 companies with annual sales exceeding $20 billion and having presence in more than 46
countries around the world . (www.parker.com)
Role : Sr. Engineer for Service & commissioning of A.C. & D.C. Drives.
Working Responsibilities
On site servicing of the Higher Rating Drives.
Sub-Assembly level servicing in A.C. & D.C. Drives.
Components level servicing in A.C. & D.C. Drives.
Evaluating of faulty products.
Analyzing of failed product.
Circuit tracing with the help of Circuit Diagrams.
Material Planning for Servicing.
Intending Purchase Orders for Spares.
Invoicing of repair revenues.
Technical assistance for Field Engineers and Customers over phone.
Global technical contact for principal and group companies.
Interaction with global principal’s conformance & design dept for Product updates &
repair issues.
3. Page 3 of 3
Achievements & Recognitions
Received an award of “Best Service Engineer” for the Failure analysis report on MRF
Ltd., Tiruvottiyur in June 2009.
Assisted in the design of First localized 110 & 160KW AC drives, validated in the year
2009.
ORGANISATION : for SIEMENS Ltd.,
DESIGNATION : Customer Support Engineer
Period : from OCTOBER-2003 to APRIL-2008
Maintenance and trouble shooting of 180 kva SIEMENS make static converters fitted in 25kv AC
Locomotives (WAG-5, WAG-7, and WAP-1&WAP-4).
Maintenance and trouble shooting of 25 kva SIEMENS make inverters fitted in railway AC
Coaches.
Modification of 3 ph sine filter, 3ph cooling fan & DC choke.
Commissioning and installations of both 180kva & 25kva converters.
Collection of summary statements from various depots.
Preparation of Measurement book for final billing.
Education & Training
1999-2003
B.Tech in Electronics & Communications Engineering BAPATLA Engineering college-
NAGARJUNA University, BAPATLA, Andhra Pradesh .
2003
Under gone training on 180kva and 25kva Static converters held at SIEMENS factory in Nasik.
2008
Under gone training in MUMBAI on Large rating AC drive Design & localization.
Personal Details
Date of Birth : 14.06.1981
Marital Status : Married
Nationality : Indian
Languages Known : English, Telugu, Tamil, Kannada and Hindi
Contact Address : G-310, Premier Gruhalakshmi Apartments, S.M Road
Jalahalli West, Bengaluru-560015
Disclaimer
I hereby declare that the above mentioned information is true to the best of my knowledge.
Date:
Place: Bengaluru ASUTHOSH BABU VELSURI