What is broadbandWhat is the potential for broadband wireless syste.pdf

•

0 likes•2 views

What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us Solution What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us.

Education

no it will catch on here in the us also because as the techology increases the needs also increases
so broadband will play a major role in day today life.according to us analysis the wireless
broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the
population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was
28.0% in the world.
so the above analysis is one of the proof for developing of wireless Broadband in us

Similar to What is broadbandWhat is the potential for broadband wireless syste.pdf

Ch#3.pptx

SalmanAli326159

Frontiers of Wireless and Mobile Communications

Sai Varrshini

5 g link budget

praveenkumar01

Cellular connectivity has provided impressive Internet growth in Africa over the past decade, but according to the ITU, in 2017, Africa only had 20% of the population using the Internet; a laggard compared to 40% in Asia & the Pacific and the 50% world average. We have connected the easy half of the population and connecting the next half of the world will require new innovative thinking. This presentation looks at the current challenges to overcome and building blocks that can help community owned networks grow. It studies radio infrastructure, spectrum sharing and localized services all underpinned by the right regulation and skills.

Community owned networks - connectivity solution for Africa

David Johnson

Future generations of cellular communications requires higher data rates and a more reliable transmission link with the growth of multimedia services, while keeping satisfactory quality of service, . MIMO antenna systems have been considered as an efficient approach to address these demands by offering significant multiplexing and diversity gains over single antenna systems without increasing bandwidth and power. Although MIMO systems can unfold their huge benefit in cellular base stations, but they may face limitations when it comes to their deployment in mobile handsets. To overcome this drawback, relays (fixed or mobile terminals) can cooperate to improve the overall system performance in cellular networks. Cooperative communications can efficiently combat the severity of fading and shadowing through the assistance of relays. It has been found that using relays the capacity and coverage of cellular networks can be extended without increasing mobile transmit power or demanding extra bandwidth.

A Review on Cooperative Communication Protocols in Wireless World

ijwmn

AWMCN-1.pptx

Hadeeb

17._CS-12-Networking-1_Evolution_of_Network_1.docx

KAMI643381

Networking Terminology

SabinDhakal13

Path-loss prediction of GSM signals in warri

onome okuma

Laser Broadband By Sumita Giri

Sumita Giri

Facebook Connectivity Lab

Dmitry Tseitlin

Ramudoc 140228112714-phpapp01

KolaShankar

A Master of ScienceProject Report Optical cmms-oaa516

Olufisayo Adekile

Chapter 1.pptx

sameernsn1

stratellite document

Nakka Ramu

1) What role does bandwidth play in the successful delivery of the Advanced Mobile Communications and Information System? 2) When does functionality transform the standard BlackBerry device into an Advanced Mobile Communications and Information System? 3)Describe three telecommunications and network technologies used to connect the BlackBerry with other devices. 4)At this stage in the process, what actions might Sandra and Josh take to reduce the overall costs of the Advanced Mobile Communications and Information System? Solution 1) Bandwidth is directly proprtional to speed of receiving abd sending data. More bandwidth means quicker data will be able to be sent and received through the network. A sufficient amount of bandwidth will be required to satisfy both synchronous and asynchronous forms of voice and text communications. In addition, to be able to provide two-way data communications for interacting with corporate information systems without interruption of buffering, it will require a decent amount of bandwidth. Therefore, they will need to have enough bandwidth that will satisfy all communications and data transfers through the network. 2) A standard Blackberry transforms to an Advanced Mobile Communications and Information System instantaneously. 3) BlackBerry will include 4) They first need to decide on how much they are willing to spend on the Advanced Mobile Communications and Information System (AMIS). After that they should discuss what functionalities they want the AMIS to have that is feasible involving the cost. Accordingly they should research on best provider of these in least cost..

1) What role does bandwidth play in the successful delivery of the A.pdf

aminbijal86

Physical transmission media Presentation slides

Punjab University

PPT-DC.pptx

KrishnaveniManickam3

Presentation1.pptx

ssuser356d4d

These slides discuss how improvements in the data rates of wireline and wireless systems have and continue to occur. For wireline systems, these improvements are driven by the use of better glass fiber, lasers, amplifiers, and wavelength division multiplexing and there appears to be few limits to these improvements. For wireless systems, these improvements are primarily driven by the use of better ICs. As long as these improvements in ICs continue to occur, improvements in data rates along with improvements in the use of the frequency spectrum continue to be possible. Improvements in both wireless and wireline systems will also make new forms of Internet content possible. Furthermore, these improvements in ICs along with the improvements in MEMS that are discussed in a related set of slides are gradually making cognitive radio economically feasible. All of these improvements are creating various kinds of entrepreneurial opportunities. These slides are based on a forthcoming book entitled “Technology Change and the Rise of New Industries and they are the sixth session in a course entitled “Analyzing Hi-Tech Opportunities.”

Telecommunication Systems: How is Technology Change Creating New Opportunitie...

Jeffrey Funk

Similar to What is broadbandWhat is the potential for broadband wireless syste.pdf (20)

Ch#3.pptx

Frontiers of Wireless and Mobile Communications

5 g link budget

Community owned networks - connectivity solution for Africa

A Review on Cooperative Communication Protocols in Wireless World

AWMCN-1.pptx

17._CS-12-Networking-1_Evolution_of_Network_1.docx

Networking Terminology

Path-loss prediction of GSM signals in warri

Laser Broadband By Sumita Giri

Facebook Connectivity Lab

Ramudoc 140228112714-phpapp01

A Master of ScienceProject Report Optical cmms-oaa516

Chapter 1.pptx

stratellite document

1) What role does bandwidth play in the successful delivery of the A.pdf

Physical transmission media Presentation slides

PPT-DC.pptx

Presentation1.pptx

Telecommunication Systems: How is Technology Change Creating New Opportunitie...

More from apleathers

While a majority of the world\'s current electricity supply is generated from fossil fuels such as coal, oil and natural gas, these traditional energy sources face a number of challenges including rising prices, security concerns over dependence on imports from a limited number of countries which have significant fossil fuel supplies, and growing environmental concerns over the climate change risks associated with power generation using fossil fuels. As a result of these and other challenges facing traditional energy sources, governments, businesses and consumers are increasingly supporting the development of alternative energy sources and new technologies for electricity generation. Renewable energy sources such as solar, biomass, geothermal, hydroelectric and windpower generation have emerged as potential alternatives which address some of these concerns. As opposed to fossil fuels, which draw on finite resources that may eventually become too expensive to retrieve, renewable energy sources are generally unlimited in availability. Solar power generation has emerged as one of the most rapidly growing renewable sources of electricity. Solar power generation has several advantages over other forms of electricity generation: Reduced Dependence on Fossil Fuels. Solar energy production does not require fossil fuels and is therefore less dependent on this limited and expensive natural resource. Although there is variability in the amount and timing of sunlight over the day, season and year, a properly sized and configured system can be designed to be highly reliable while providing long-term, fixed price electricity supply. Environmental Advantages. Solar power production generates electricity with a limited impact on the environment as compared to other forms of electricity production. Matching Peak Time Output with Peak Time Demand. Solar energy can effectively supplement electricity supply from an electricity transmission grid, such as when electricity demand peaks in the summer Modularity and Scalability. As the size and generating capacity of a solar system are a function of the number of solar modules installed, applications of solar technology are readily scalable and versatile. Flexible Locations. Solar power production facilities can be installed at the customer site which reduces required investments in production and transportation infrastructure. Government Incentives. A growing number of countries have established incentive programs for the development of solar and other renewable energy sources, such as (i) net metering laws that allow on-grid end users to sell electricity back to the grid at retail prices, (ii) direct subsidies to end users to offset costs of photovoltaic equipment and installation charges, (iii) low interest loans for financing solar power systems and tax incentives; and (iv) government standards that mandate minimum usage levels of renewable energy sources. Despite the cost, an advantage of photovoltaic systems is.

While a majority of the worlds current electricity supply is gener.pdf

apleathers

WaterSolutionWater.pdf

apleathers

Thousands of repeating units called nephrons will form a kidney and these organs are useful in extracting the waste from blood and provides a balance in body fluids and same basic design of kidneys will be found in all vertebrate kidneys. It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle the problem of living in water as their body fluid is of high osmotic concentration. These kidneys helped them to prevent water from outside to inside and to prevent the solutes leaving the body. The nephrons in these animals use to absorb the ions across the nephron tubules. The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of tubules which was restricted to the trunk region of their body and each tubule was found to be opened medially into the mesomeral coelom and these will be joined the hypomeral coelom using a short canal. Later on these tubules curved posteriorly so that they can be united into a common duct called archinephric duct and it has opened in cloaca. The bulging of spherical cluster of capillaries in the nephrocoel of each segment was seen, in later stages the glomerulus, nephrocoel and tubule will joined together to from a functional unit known as archinephron-this is known as primitive vertebrate kidney. During the course of evolution the nephrocoel lost its connect with that of hypomeral coelom and slowly it became specialized as Bowman\'s capsule and like this bowman’s capsule was able to form a union between glomerulus and renal tubule-it formed a functional unit called nephron. Malpighian body was formed by the combination of glomerulus and Bowman\'s capsule and in vertebrates the excretory organs are derived from mesoderm and vertebrates got unique adaptation by having glomerulus which is water permeable capillaries and its suitability for free water clearance gave them extra advantage for vertebrates for the evolution radiation in the physiologically fresh water hostile environment. Solution Thousands of repeating units called nephrons will form a kidney and these organs are useful in extracting the waste from blood and provides a balance in body fluids and same basic design of kidneys will be found in all vertebrate kidneys. It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle the problem of living in water as their body fluid is of high osmotic concentration. These kidneys helped them to prevent water from outside to inside and to prevent the solutes leaving the body. The nephrons in these animals use to absorb the ions across the nephron tubules. The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of tubules which was restricted to the trunk region of their body and each tubule was found to be opened medially into the mesomeral coelom and these will be joined the hypomeral coelom using a short canal. Later on these tubules curved posteriorly so tha.

Thousands of repeating units called nephrons will form a kidney and .pdf

apleathers

To understand the complexicities of the issue at hand we must first look at what cause inland seas. According to the geographic descrptions,it was more than likely a result of tectonic plates shifting during the developement of our current landmass positions. When they shift,the land can either sinkor have its ocean basins fill with water from flooding.This is called Transgression.Either case causes a developement of a salty body of water with aquatic animals trapped inside.Being that is surrounded by a desert-like biome,itis more likely to be the result of the tectonic plates spreading, causing the land to sink and fill in with salt water.As this occurs, prey animals will thrive through a lack of predators, such as smaller fish.This enables the fishing industry to boom as it did. The fishing trade in this area is at risk of falling.when humans alter systems such as this one,their stabilty declines.For a while this was more than likely a self- sustaining environment.The implementation of irrigation systemshave first,affected the wildlife surrounding the inland sea, which was assisting its survival. Every animal plays a role in the ecosystem.When the industries were built around the body of water, the land ecosystem suffered.As a result, the fish in the corresponding water will eventually suffer.Being a self- sustaining system, it will keep water cycling by itself. When the system was built for local farmers, water supplies were being pulled from the natural made sea and into other locations. this is normally fine for areas,but in one such as this,without any natural made filtering system, it will begin losing water. the process will takea while due to the water cycle consistently adding some back,but will occur. As the water levels decrease,so will the fish.This is the cause of research number two. With an increasing salinity count,the pHof the water and soil will change as well. Adding salt to the soil as it is doing through wind patterns, slowly crops, which once thrived in the surrounding land,will begin todeplete.Not all plants require the same nutrient levels..If the farmer \'s crops are thriving now, with lower salinity counts and lower pH\'s then the same crops will not grow as well in higher salt concentrations and higher pH\'values .Another factor affecting local farmers as well as the fishermen is the pesticides and chemicals.These will not only affect the water\'s pH ,it will also affect the stability of the water for the fish to live in.As more chemicals and sewage are added to a body of water , the fish have no choice but to take in those hazardous wastes. At first, humans will grow sick of ill- prepared fish. Second,the fish will slowly begin to die off causing the fishermen to lose a source of income. The future of this environment is devasting. Local animals , which do use the sea as a source of food ,will inadvertently be affected as well . While these animals may be capable of migrating , they cannot move far into a desert w.

To understand the complexicities of the issue at hand we must first .pdf

apleathers

The P is the present value of the cash flow streamP = 100 (1+10.pdf

apleathers

Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the glycosidic linkage with the N 1 of the nitrogenous base. 14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the diphosphopyridine molecules, which having significant function in the cell. Functions of Mono nucleotides: Other functions used in molecular research studies like : Solution Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the glycosidic linkage with the N 1 of the nitrogenous base. 14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the diphosphopyridine molecules, which having significant function in the cell. Functions of Mono nucleotides: Other functions used in molecular research studies like :.

Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf

apleathers

Ques-1: Prenatal diagnosis has both positive and potentially negative consequences. While it is most often used to detect serious problems with the fetus, the technology can also be used potentially to select embryos based on sex, appearance, Where do you think we should draw the line in allowing parents to use prenatal diagnosis Answer: Genetic testing is performed for prenatal diagnosis to know any chromosomal or genetical - inherited abnormalities of implanted human embryo. It has positive consequence, as some couples would like to avoid getting a baby with genetic abnormalities. However, there are negative consequences such as various \"ethical and moral issues of prenatal diagnosis as explained below. Therefore, it is crucial to draw a line when conducting prenatal diagnosis finally a couple musty get legal permissions to undergo prenatal diagnosis. Screening tests for genetic issues can be performed in the first trimester, second trimester or both trimesters. Carrier testing is also an option performed prior to or during pregnancy. Carrier testing provides information as to whether one or both parents are carriers for certain inherited disorders. The results of these tests are used to determine an appropriate plan of care for the patient. Genetic testing of the fetus and the parents offers both opportunities and ethical challenges. As a Registered Nurse, you need to be aware of your own feelings in order to provide non-biased professional support. Implications of genetic testing: Genetic testing is the pre-implantation technology is now currently using in detecting and screening embryo in order to assess whether the resultant embryos from fertilization are normal or abnormal genotypically. A registered nurse must advice & support to a couple seeking guidance about the genetic testing because genetic screening has various ethical and moral aspects. The major rising ethical challenge is the connection between the pre-selection of embryos based on meticulous genetic analysis followed by rising discrimination of disabled people. This ethical problem is associated with selection of future children based on their low levels of disabilities and abnormalities. Ethical challenges with preimplantation of genetic testing or diagnosis (PGD): 1. PGD allows embryo selection after pregnancy or even before initiation of pregnancy. However, this procedure is very controversial and faces a variety of moral ethics that are completely relies upon moral status of embryo and prenatal diagnosis in selecting progeny without the use of abortion (medical issue). 2. The major rising ethical challenge is the connection between the pre-selection of embryos based on meticulous genetic analysis followed by rising discrimination of disabled people, a psychological moral issue. This ethical problem is associated with selection of future children based on their low levels of disabilities and abnormalities. A clinic should have license primarily to perform preimplantatio.

Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf

apleathers

Question: What are the elements of safe drinking water act? What are the aspect & provision for safe drinking water act? Solution : This act was passed in 2002. The main elements imposes in the act are providing the permissible limit of contaminants in drinking water i.e. drinking water standard, establishes the rule for operators of facilities, for drinking water systems, for laboratories that dealt with the drinking water parameter testing, training & certification to operators & there are many other elements that require for safe drinking purpose. Its main aspect is to ensure the safety of consumers by drinking the potable water (the water contain the contaminants up to prescribed limit given in the act. By consuming the potable water, the diseases associated due to drinking of polluted water are minimized. There are three parameters are described in the act. These are physical parameters, chemical parameters, & biological parameters. Physical parameter includes suspended solid, turbidity, dissolved solid, pH, hardness, acidity, alkanity etc. The chemical parameters include BOD, COD, ThOD, DO, etc. The biological parameter includes E.coli, B.Coli bacteria, pathogenic bacteria, disease causing bacteria. Amongst, three bacteria, it’s the biological parameters which are very objectionable. The upper limit of this parameters are prescribed in the act upto which the water are drinkable. Note: All pollutant water are contaminants but its not necessary that all contaminant are pollutant..

QuestionWhat are the elements of safe drinking water act What ar.pdf

apleathers

Programimport java.util.; import java.io.; class FoodTruck.pdf

apleathers

Please follow the data and description : Active Directory : In general the Active Directory is abbrevated as AD and is a directory service that Microsoft developed for Windows domain networks. It is included in most of the available Windows Server operating systems as a set of processes and services. Considerations for designing a Active Directory : Before moving on directly to the planning ang implementation of the Active Directory we just need to get some major factors and their considerations into account so as to handle them perfectly. When we are designing the Active Directory network, it is important to use the four divisions (forests, domains, organizational units, and sites) to their maximum potential. Some of the important factors/considerations are described below : a) Active Directory elements : When designing an Active Directory, we need to be completely clear of what each element or part actually means and how it fits into the overall design. b) Active Directory forest : In general, the forest, in terms of Active Directory, basically means every domain, organizational unit, and any other object stored within its database. The forest is the absolute top level of the Active Directory infrastructure. We can have more than one forest in a company, which actually represent the high level security boundaries, and can therefore improve security between different business units or companies belonging to a single organization. The point behind the forest is that we have all our domains and domain tree within the organization itself contained within it. It is designed so that we can have a transitive links between all of the trees within one forest. c) Active Directory tree : A tree with reference to the Active Directory basically refers to a domain and all of its objects that merge into a single DNS name. d) Organizational Units and the Leaf Objects : In an Active Directory, Organizational Units abbrevated as OUs, which are also called as the Containers, and the Leaf Objects, which are of non-containing objects such as computer accounts and user accounts, are directly related. We can access the OUs and other objects through the Microsoft Management Console (MMC) or through the Users and Computers tool in the Administrative Tools. e) Active Directory Sites : The Sites and Services of the MMC is a utility that a lot of Windows administrators, particularly in smaller organizations, completely overlook. This part of Active Directory, however, is one of the most crucial parts to understand and implement correctly. These Sites give us a very unique and well-designed approach to separate specific locations within the Active Directory. As the principle of an Active Directory domain is global-meaning that it is meant to be the same anywhere-it could present a problem for users who move from office to office, or for offices with network connections that are slow. Active Directory sites allow one to specify the IP address spaces or subnets used with.

Please follow the data and description Active Directory In gen.pdf

apleathers

package DataStructures; public class HelloWorld > { public HelloWorld( ) { root = null; } public void insert( AnyType x ) { root = insert( x, root ); } public void remove( AnyType x ) { root = remove( x, root ); } public AnyType findMin( ) { if( isEmpty( ) ) System.out.println(\"tree is empty\"); return findMin( root ).element; } public AnyType findMax( ) { if( isEmpty( ) ) System.out.println(\"tree is empty\"); return findMax( root ).element; } public boolean contains( AnyType x ) { return contains( x, root ); } public void makeEmpty( ) { root = null; } public boolean isEmpty( ) { return root == null; } public void printTree( ) { if( isEmpty( ) ) System.out.println( \"Empty tree\" ); else printTree( root ); } private BinaryNode insert( AnyType x, BinaryNode t ) { if( t == null ) return new BinaryNode( x, null, null ); int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) t.left = insert( x, t.left ); else if( compareResult > 0 ) t.right = insert( x, t.right ); else ; // Duplicate; do nothing return t; } private BinaryNode remove( AnyType x, BinaryNode t ) { if( t == null ) return t; // Item not found; do nothing int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) t.left = remove( x, t.left ); else if( compareResult > 0 ) t.right = remove( x, t.right ); else if( t.left != null && t.right != null ) // Two children { t.element = findMin( t.right ).element; t.right = remove( t.element, t.right ); } else t = ( t.left != null ) ? t.left : t.right; return t; } private BinaryNode findMin( BinaryNode t ) { if( t == null ) return null; else if( t.left == null ) return t; return findMin( t.left ); } private BinaryNode findMax( BinaryNode t ) { if( t != null ) while( t.right != null ) t = t.right; return t; } private boolean contains( AnyType x, BinaryNode t ) { if( t == null ) return false; int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) return contains( x, t.left ); else if( compareResult > 0 ) return contains( x, t.right ); else return true; // Match } private void printTree( BinaryNode t ) { if( t != null ) { printTree( t.left ); System.out.println( t.element ); printTree( t.right ); } } private int height( BinaryNode t ) { if( t == null ) return -1; else return 1 + Math.max( height( t.left ), height( t.right ) ); } // Basic node stored in unbalanced binary search trees private static class BinaryNode { // Constructors BinaryNode( AnyType theElement ) { this( theElement, null, null ); } BinaryNode( AnyType theElement, BinaryNode lt, BinaryNode rt ) { element = theElement; left = lt; right = rt; } AnyType element; // The data in the node BinaryNode left; // Left child BinaryNode right; // Right child } /** The tree root. */ private BinaryNode root; public static void main( String [ ] args ) { HelloWorld t = new HelloWorld( ); final int NUMS = 4000; final int GAP = 37; System.out.println( \"Checking... (no more output means success)\" ); for( int i = GAP; i != 0; i = ( i + GAP ) % NUMS ) t.insert.

package DataStructures; public class HelloWorld AnyType extends.pdf

apleathers

it always attacks oxygen.the image doesnot workSolutionit alwa.pdf

apleathers

import java.util.Scanner; public class Fraction { /** * instance variable */ private int numerator; /** * instance variable */ private int denominator; /** * param args */ public static void main(String[] args) { // TODO Auto-generated method stub final Fraction f1 = new Fraction(); final Fraction f2 = new Fraction(10, 15); final Fraction f3 = new Fraction(); Fraction f4 = new Fraction(); Fraction f5; f3.setNumerator(14); f3.setDenominator(16); f1.print(); f2.print(); f3.print(); // f1.get(); // f1.print(); f4.assign(12, 50); f4.print(); f5 = Fraction.multiply(f2, f4); f5.print(); System.out.println(\"\ f2: \"); f2.print(); f2.multiply(f4); System.out.println(\"\ f2: \"); f2.print(); } /** * default constructor * initlizing numerator with 0 and denominator with 1 */ public Fraction() { // System.out.println(\"In default construction\"); numerator = 0; denominator = 1; } /** * param n * param d */ public Fraction(final int n, final int d) { // System.out.println(\"In Parameter construction\"); numerator = n; denominator = d; } /** * return numerator */ public int getNumerator() { return numerator; } /** * param numerator */ public void setNumerator(final int numerator) { this.numerator = numerator; } /** * return denominator */ public int getDenominator() { return denominator; } /** * param denominator */ public void setDenominator(final int denominator) { this.denominator = denominator; } /** * print fraction */ public void print() { System.out.print(numerator + \"/\" + denominator + \" \"); } /** * */ public void get() { final Scanner kb = new Scanner(System.in); System.out.print(\"\ Enter numerator: \"); numerator = kb.nextInt(); System.out.print(\"Enter denominator: \"); denominator = kb.nextInt(); kb.close(); } /** * param n * param d */ public void assign(final int n, final int d) { if (d == 0) { throw new IllegalArgumentException(\"denominator can not be 0\"); } if (n < 0 || d < 0) { throw new IllegalArgumentException(\"values must be positive\"); } numerator = n; denominator = d; reduce(); } /** * it reduce numerator and denominator by GCD of numerator and denominator */ private void reduce() { int min = numerator; int gcd; if (numerator > denominator) { min = denominator; } for (gcd = min; gcd > 1; gcd--) { if (numerator % gcd == 0 && denominator % gcd == 0) { break; } } numerator = numerator / gcd; denominator = denominator / gcd; } /** * param f1 * param f2 * return f */ public static Fraction multiply(Fraction f1, Fraction f2) { Fraction f = new Fraction(); int num; int den; num = f1.getNumerator() * f2.getNumerator(); den = f1.getNumerator() * f2.getDenominator(); f.assign(num, den); f.reduce(); return f; } /** * param f */ public void multiply(Fraction f) { this.numerator = this.numerator * f.getNumerator(); this.denominator = this.denominator * f.getDenominator(); this.reduce(); return; } } Solution import java.util.Scanner; public class Fraction { /** * instance variable */ private int numerator; /** * instance variable */ priv.

import java.util.Scanner;public class Fraction { instan.pdf

apleathers

Hi, Please find the Ansswer below. //PLAYLIST.h #include #include #include #include using namespace std; class Playlist { private: string uniqueID; string songName; string artistName; int songLength; public: Playlist() { uniqueID = \"\", songName = \"\", artistName = \"\", songLength = 0; }; Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength); void InsertAfter(); void SetNext(); string GetID(); string GetSongName(); string GetArtistName(); int GetSongLength(); string GetNext(); void PrintPlaylistNode(); }; //PLAYLIST.CPP #include \"Playlist.h\" Playlist::Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength) { uniqueID = auniqueId; songName = asongName; artistName = aArtistName; songLength = aSongLength; } string Playlist::GetArtistName() { return artistName; } string Playlist::GetID() { return uniqueID; } string Playlist::GetSongName() { return songName; } int Playlist::GetSongLength() { return songLength; } void Playlist::SetNext() { } string Playlist::GetNext() { return \"\"; } void Playlist::InsertAfter() { } void Playlist::PrintPlaylistNode() { cout << \"Unique ID:\" << uniqueID << endl ; cout << \"Song Name:\" << songName << endl; cout << \"Artist Name:\" << artistName << endl; cout << \"Song Length (in seconds):\" << songLength << endl; } //PLAYSLITSNODE.h #pragma once #include \"Playlist.h\" #include class PlaylistNode { private: std::list library; Playlist get(list _list, int _i); void PrintPlaylist(Playlist aPlayList); public: void Addsong(Playlist aPlayslist); void Removesong(string aUnwiid); void Changeposition(int oldPostion, int anewPostion); void PrintSongByartist(string aAstist); void PrintSongtotalLen(); void PrintFullPlayList(); }; //PLAYLIST.CPP #include \"PlaylistNode.h\" void PlaylistNode::Addsong(Playlist aPlaylist) { library.push_back(aPlaylist); } void PlaylistNode::Removesong(string aUnwiid) { if (library.size > 0) { for (it = library.begin(); it != library.end(); ++it) { if (it->GetID() == aUnwiid) { cout << it->GetSongName() << endl; library.remove(*it); break; } } } } Playlist PlaylistNode::get(list _list, int _i) { list::iterator it = _list.begin(); for (int i = 0; i<_i; i++) { ++it; } return *it; } std::list::iterator it; void PlaylistNode::PrintFullPlayList() { for (it = library.begin(); it != library.end(); ++it) { PrintPlaylist(*it); } } void PlaylistNode::PrintSongByartist(string aartiename) { for (it = library.begin(); it != library.end(); ++it) { if(it->GetArtistName() == aartiename) PrintPlaylist(*it); } } void PlaylistNode::PrintSongtotalLen() { int TotalSonglengst = 0; for (it = library.begin(); it != library.end(); ++it) { TotalSonglengst += it->GetSongLength(); } cout << \"Total songs Length (in seconds):\" << TotalSonglengst << endl; } void PlaylistNode::PrintPlaylist(Playlist aPlayList) { cout << \"Unique ID:\" << aPlayList.GetID() << endl; cout << \"Song Name:\" << aPlayList.GetSongName() << endl; cout << \"Artist Name:\" << aPlayList.GetArtis.

Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf

apleathers

Family as a Social Institution: A family can be defined as group of two or more people living in a household and connected to each other by blood or adoption or marriage. Family as social constitution serves to create and maintain the family life in correct ways which are considered good by a society. It is not an objective institution as it serves to give shape to feeling and emotions of family memberns in fundamental ways. Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its members. These small families are supported by increasingly reducing sized homes and are easier to relocate. Further, small sized nuclear families can support the expensive education, medication and other services to their children in a much better way as compared to the large sized joint families. Existence and characteristics of family structures: Some of the common family structures with their characteristic features are as follows: 1: Nuclear family: The family with two generations i.e. parents and their children 2: Extended family: The family with three generations i.e. grandparents, parents and their children constitutes an extended family. 3: Single parent family: The family in which one parent and children are residing in same household is called as single parent family. 4: Reconstituted family: The family in which either or both of the parents have children from their previous marriage living together are called as reconstituted family. Characters of a family: A family is established by mating relation between man and woman through marriage institution. Marriage is foundation of family irrespetive of mating relationship without marriage. A family always resides in a common household wherein each family member has his own name. Hence, marriage, common household, nomenclature of family members, mode of interaction and communication and an economic provision are some of the characteristics of a family. Solution Family as a Social Institution: A family can be defined as group of two or more people living in a household and connected to each other by blood or adoption or marriage. Family as social constitution serves to create and maintain the family life in correct ways which are considered good by a society. It is not an objective institution as it serves to give shape to feeling and emotions of family memberns in fundamental ways. Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its members. These small families are supported by increasingly reducing sized homes and are easier to relocate. Further, small sized nuclear families can support the expensive education, medication and other services to their children in a much better way as compared to the large sized joint families. Existence and characteristics of family structures: Some of the common family structures with their characteristic features are as follows: 1: Nuclear family: The family with two generations i.e. parents and t.

Family as a Social Institution A family can be defined as group of .pdf

apleathers

D. The actual development of new standards and protocols for the Int.pdf

apleathers

Dependent Variable. A variable that depends on one or more other variables The dependent variable responds to the independent variable. It is called dependent because it \"depends\" on the independent variable. So Answer Is D Solution Dependent Variable. A variable that depends on one or more other variables The dependent variable responds to the independent variable. It is called dependent because it \"depends\" on the independent variable. So Answer Is D.

Dependent Variable. A variable that depends on one or more other var.pdf

apleathers

C is correct. While all Layer 2 devices split collision domains, switches create a separate collision domain for each port. A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into two collision domains. D is incorrect. Solution C is correct. While all Layer 2 devices split collision domains, switches create a separate collision domain for each port. A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into two collision domains. D is incorrect..

C is correct. While all Layer 2 devices split collision domains, swi.pdf

apleathers

Answer.The following organisms are present in pod.1. Prokaryotes.pdf

apleathers

Answer: The mobile elements are the elerments move form one place to other place, where the particular element is deficient. The deficiency of mobile elements first appear in older leave whereas the deficency of the immobile elements first appear in the younger leaves The immobile elements are iron, calcium, manganese, zinc, copper and boron Solution Answer: The mobile elements are the elerments move form one place to other place, where the particular element is deficient. The deficiency of mobile elements first appear in older leave whereas the deficency of the immobile elements first appear in the younger leaves The immobile elements are iron, calcium, manganese, zinc, copper and boron.

AnswerThe mobile elements are the elerments move form one place t.pdf

apleathers

More from apleathers (20)