Submit Search
Upload
a. SN1 and c. yellow to colorless .pdf
•
0 likes
•
3 views
A
apleathers
Follow
a. SN1 and c. yellow to colorless Solution a. SN1 and c. yellow to colorless.
Read less
Read more
Education
Report
Share
Report
Share
1 of 1
Download now
Download to read offline
Recommended
While a majority of the world\'s current electricity supply is generated from fossil fuels such as coal, oil and natural gas, these traditional energy sources face a number of challenges including rising prices, security concerns over dependence on imports from a limited number of countries which have significant fossil fuel supplies, and growing environmental concerns over the climate change risks associated with power generation using fossil fuels. As a result of these and other challenges facing traditional energy sources, governments, businesses and consumers are increasingly supporting the development of alternative energy sources and new technologies for electricity generation. Renewable energy sources such as solar, biomass, geothermal, hydroelectric and windpower generation have emerged as potential alternatives which address some of these concerns. As opposed to fossil fuels, which draw on finite resources that may eventually become too expensive to retrieve, renewable energy sources are generally unlimited in availability. Solar power generation has emerged as one of the most rapidly growing renewable sources of electricity. Solar power generation has several advantages over other forms of electricity generation: Reduced Dependence on Fossil Fuels. Solar energy production does not require fossil fuels and is therefore less dependent on this limited and expensive natural resource. Although there is variability in the amount and timing of sunlight over the day, season and year, a properly sized and configured system can be designed to be highly reliable while providing long-term, fixed price electricity supply. Environmental Advantages. Solar power production generates electricity with a limited impact on the environment as compared to other forms of electricity production. Matching Peak Time Output with Peak Time Demand. Solar energy can effectively supplement electricity supply from an electricity transmission grid, such as when electricity demand peaks in the summer Modularity and Scalability. As the size and generating capacity of a solar system are a function of the number of solar modules installed, applications of solar technology are readily scalable and versatile. Flexible Locations. Solar power production facilities can be installed at the customer site which reduces required investments in production and transportation infrastructure. Government Incentives. A growing number of countries have established incentive programs for the development of solar and other renewable energy sources, such as (i) net metering laws that allow on-grid end users to sell electricity back to the grid at retail prices, (ii) direct subsidies to end users to offset costs of photovoltaic equipment and installation charges, (iii) low interest loans for financing solar power systems and tax incentives; and (iv) government standards that mandate minimum usage levels of renewable energy sources. Despite the cost, an advantage of photovoltaic systems is.
While a majority of the worlds current electricity supply is gener.pdf
While a majority of the worlds current electricity supply is gener.pdf
apleathers
What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us Solution What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us.
What is broadbandWhat is the potential for broadband wireless syste.pdf
What is broadbandWhat is the potential for broadband wireless syste.pdf
apleathers
Water Solution Water.
WaterSolutionWater.pdf
WaterSolutionWater.pdf
apleathers
Thousands of repeating units called nephrons will form a kidney and these organs are useful in extracting the waste from blood and provides a balance in body fluids and same basic design of kidneys will be found in all vertebrate kidneys. It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle the problem of living in water as their body fluid is of high osmotic concentration. These kidneys helped them to prevent water from outside to inside and to prevent the solutes leaving the body. The nephrons in these animals use to absorb the ions across the nephron tubules. The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of tubules which was restricted to the trunk region of their body and each tubule was found to be opened medially into the mesomeral coelom and these will be joined the hypomeral coelom using a short canal. Later on these tubules curved posteriorly so that they can be united into a common duct called archinephric duct and it has opened in cloaca. The bulging of spherical cluster of capillaries in the nephrocoel of each segment was seen, in later stages the glomerulus, nephrocoel and tubule will joined together to from a functional unit known as archinephron-this is known as primitive vertebrate kidney. During the course of evolution the nephrocoel lost its connect with that of hypomeral coelom and slowly it became specialized as Bowman\'s capsule and like this bowman’s capsule was able to form a union between glomerulus and renal tubule-it formed a functional unit called nephron. Malpighian body was formed by the combination of glomerulus and Bowman\'s capsule and in vertebrates the excretory organs are derived from mesoderm and vertebrates got unique adaptation by having glomerulus which is water permeable capillaries and its suitability for free water clearance gave them extra advantage for vertebrates for the evolution radiation in the physiologically fresh water hostile environment. Solution Thousands of repeating units called nephrons will form a kidney and these organs are useful in extracting the waste from blood and provides a balance in body fluids and same basic design of kidneys will be found in all vertebrate kidneys. It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle the problem of living in water as their body fluid is of high osmotic concentration. These kidneys helped them to prevent water from outside to inside and to prevent the solutes leaving the body. The nephrons in these animals use to absorb the ions across the nephron tubules. The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of tubules which was restricted to the trunk region of their body and each tubule was found to be opened medially into the mesomeral coelom and these will be joined the hypomeral coelom using a short canal. Later on these tubules curved posteriorly so tha.
Thousands of repeating units called nephrons will form a kidney and .pdf
Thousands of repeating units called nephrons will form a kidney and .pdf
apleathers
To understand the complexicities of the issue at hand we must first look at what cause inland seas. According to the geographic descrptions,it was more than likely a result of tectonic plates shifting during the developement of our current landmass positions. When they shift,the land can either sinkor have its ocean basins fill with water from flooding.This is called Transgression.Either case causes a developement of a salty body of water with aquatic animals trapped inside.Being that is surrounded by a desert-like biome,itis more likely to be the result of the tectonic plates spreading, causing the land to sink and fill in with salt water.As this occurs, prey animals will thrive through a lack of predators, such as smaller fish.This enables the fishing industry to boom as it did. The fishing trade in this area is at risk of falling.when humans alter systems such as this one,their stabilty declines.For a while this was more than likely a self- sustaining environment.The implementation of irrigation systemshave first,affected the wildlife surrounding the inland sea, which was assisting its survival. Every animal plays a role in the ecosystem.When the industries were built around the body of water, the land ecosystem suffered.As a result, the fish in the corresponding water will eventually suffer.Being a self- sustaining system, it will keep water cycling by itself. When the system was built for local farmers, water supplies were being pulled from the natural made sea and into other locations. this is normally fine for areas,but in one such as this,without any natural made filtering system, it will begin losing water. the process will takea while due to the water cycle consistently adding some back,but will occur. As the water levels decrease,so will the fish.This is the cause of research number two. With an increasing salinity count,the pHof the water and soil will change as well. Adding salt to the soil as it is doing through wind patterns, slowly crops, which once thrived in the surrounding land,will begin todeplete.Not all plants require the same nutrient levels..If the farmer \'s crops are thriving now, with lower salinity counts and lower pH\'s then the same crops will not grow as well in higher salt concentrations and higher pH\'values .Another factor affecting local farmers as well as the fishermen is the pesticides and chemicals.These will not only affect the water\'s pH ,it will also affect the stability of the water for the fish to live in.As more chemicals and sewage are added to a body of water , the fish have no choice but to take in those hazardous wastes. At first, humans will grow sick of ill- prepared fish. Second,the fish will slowly begin to die off causing the fishermen to lose a source of income. The future of this environment is devasting. Local animals , which do use the sea as a source of food ,will inadvertently be affected as well . While these animals may be capable of migrating , they cannot move far into a desert w.
To understand the complexicities of the issue at hand we must first .pdf
To understand the complexicities of the issue at hand we must first .pdf
apleathers
The P is the present value of the cash flow stream P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3 = 207.36 Solution The P is the present value of the cash flow stream P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3 = 207.36.
The P is the present value of the cash flow streamP = 100 (1+10.pdf
The P is the present value of the cash flow streamP = 100 (1+10.pdf
apleathers
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the glycosidic linkage with the N 1 of the nitrogenous base. 14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the diphosphopyridine molecules, which having significant function in the cell. Functions of Mono nucleotides: Other functions used in molecular research studies like : Solution Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the glycosidic linkage with the N 1 of the nitrogenous base. 14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the diphosphopyridine molecules, which having significant function in the cell. Functions of Mono nucleotides: Other functions used in molecular research studies like :.
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
apleathers
Ques-1: Prenatal diagnosis has both positive and potentially negative consequences. While it is most often used to detect serious problems with the fetus, the technology can also be used potentially to select embryos based on sex, appearance, Where do you think we should draw the line in allowing parents to use prenatal diagnosis Answer: Genetic testing is performed for prenatal diagnosis to know any chromosomal or genetical - inherited abnormalities of implanted human embryo. It has positive consequence, as some couples would like to avoid getting a baby with genetic abnormalities. However, there are negative consequences such as various \"ethical and moral issues of prenatal diagnosis as explained below. Therefore, it is crucial to draw a line when conducting prenatal diagnosis finally a couple musty get legal permissions to undergo prenatal diagnosis. Screening tests for genetic issues can be performed in the first trimester, second trimester or both trimesters. Carrier testing is also an option performed prior to or during pregnancy. Carrier testing provides information as to whether one or both parents are carriers for certain inherited disorders. The results of these tests are used to determine an appropriate plan of care for the patient. Genetic testing of the fetus and the parents offers both opportunities and ethical challenges. As a Registered Nurse, you need to be aware of your own feelings in order to provide non-biased professional support. Implications of genetic testing: Genetic testing is the pre-implantation technology is now currently using in detecting and screening embryo in order to assess whether the resultant embryos from fertilization are normal or abnormal genotypically. A registered nurse must advice & support to a couple seeking guidance about the genetic testing because genetic screening has various ethical and moral aspects. The major rising ethical challenge is the connection between the pre-selection of embryos based on meticulous genetic analysis followed by rising discrimination of disabled people. This ethical problem is associated with selection of future children based on their low levels of disabilities and abnormalities. Ethical challenges with preimplantation of genetic testing or diagnosis (PGD): 1. PGD allows embryo selection after pregnancy or even before initiation of pregnancy. However, this procedure is very controversial and faces a variety of moral ethics that are completely relies upon moral status of embryo and prenatal diagnosis in selecting progeny without the use of abortion (medical issue). 2. The major rising ethical challenge is the connection between the pre-selection of embryos based on meticulous genetic analysis followed by rising discrimination of disabled people, a psychological moral issue. This ethical problem is associated with selection of future children based on their low levels of disabilities and abnormalities. A clinic should have license primarily to perform preimplantatio.
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
apleathers
Recommended
While a majority of the world\'s current electricity supply is generated from fossil fuels such as coal, oil and natural gas, these traditional energy sources face a number of challenges including rising prices, security concerns over dependence on imports from a limited number of countries which have significant fossil fuel supplies, and growing environmental concerns over the climate change risks associated with power generation using fossil fuels. As a result of these and other challenges facing traditional energy sources, governments, businesses and consumers are increasingly supporting the development of alternative energy sources and new technologies for electricity generation. Renewable energy sources such as solar, biomass, geothermal, hydroelectric and windpower generation have emerged as potential alternatives which address some of these concerns. As opposed to fossil fuels, which draw on finite resources that may eventually become too expensive to retrieve, renewable energy sources are generally unlimited in availability. Solar power generation has emerged as one of the most rapidly growing renewable sources of electricity. Solar power generation has several advantages over other forms of electricity generation: Reduced Dependence on Fossil Fuels. Solar energy production does not require fossil fuels and is therefore less dependent on this limited and expensive natural resource. Although there is variability in the amount and timing of sunlight over the day, season and year, a properly sized and configured system can be designed to be highly reliable while providing long-term, fixed price electricity supply. Environmental Advantages. Solar power production generates electricity with a limited impact on the environment as compared to other forms of electricity production. Matching Peak Time Output with Peak Time Demand. Solar energy can effectively supplement electricity supply from an electricity transmission grid, such as when electricity demand peaks in the summer Modularity and Scalability. As the size and generating capacity of a solar system are a function of the number of solar modules installed, applications of solar technology are readily scalable and versatile. Flexible Locations. Solar power production facilities can be installed at the customer site which reduces required investments in production and transportation infrastructure. Government Incentives. A growing number of countries have established incentive programs for the development of solar and other renewable energy sources, such as (i) net metering laws that allow on-grid end users to sell electricity back to the grid at retail prices, (ii) direct subsidies to end users to offset costs of photovoltaic equipment and installation charges, (iii) low interest loans for financing solar power systems and tax incentives; and (iv) government standards that mandate minimum usage levels of renewable energy sources. Despite the cost, an advantage of photovoltaic systems is.
While a majority of the worlds current electricity supply is gener.pdf
While a majority of the worlds current electricity supply is gener.pdf
apleathers
What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us Solution What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us.
What is broadbandWhat is the potential for broadband wireless syste.pdf
What is broadbandWhat is the potential for broadband wireless syste.pdf
apleathers
Water Solution Water.
WaterSolutionWater.pdf
WaterSolutionWater.pdf
apleathers
Thousands of repeating units called nephrons will form a kidney and these organs are useful in extracting the waste from blood and provides a balance in body fluids and same basic design of kidneys will be found in all vertebrate kidneys. It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle the problem of living in water as their body fluid is of high osmotic concentration. These kidneys helped them to prevent water from outside to inside and to prevent the solutes leaving the body. The nephrons in these animals use to absorb the ions across the nephron tubules. The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of tubules which was restricted to the trunk region of their body and each tubule was found to be opened medially into the mesomeral coelom and these will be joined the hypomeral coelom using a short canal. Later on these tubules curved posteriorly so that they can be united into a common duct called archinephric duct and it has opened in cloaca. The bulging of spherical cluster of capillaries in the nephrocoel of each segment was seen, in later stages the glomerulus, nephrocoel and tubule will joined together to from a functional unit known as archinephron-this is known as primitive vertebrate kidney. During the course of evolution the nephrocoel lost its connect with that of hypomeral coelom and slowly it became specialized as Bowman\'s capsule and like this bowman’s capsule was able to form a union between glomerulus and renal tubule-it formed a functional unit called nephron. Malpighian body was formed by the combination of glomerulus and Bowman\'s capsule and in vertebrates the excretory organs are derived from mesoderm and vertebrates got unique adaptation by having glomerulus which is water permeable capillaries and its suitability for free water clearance gave them extra advantage for vertebrates for the evolution radiation in the physiologically fresh water hostile environment. Solution Thousands of repeating units called nephrons will form a kidney and these organs are useful in extracting the waste from blood and provides a balance in body fluids and same basic design of kidneys will be found in all vertebrate kidneys. It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle the problem of living in water as their body fluid is of high osmotic concentration. These kidneys helped them to prevent water from outside to inside and to prevent the solutes leaving the body. The nephrons in these animals use to absorb the ions across the nephron tubules. The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of tubules which was restricted to the trunk region of their body and each tubule was found to be opened medially into the mesomeral coelom and these will be joined the hypomeral coelom using a short canal. Later on these tubules curved posteriorly so tha.
Thousands of repeating units called nephrons will form a kidney and .pdf
Thousands of repeating units called nephrons will form a kidney and .pdf
apleathers
To understand the complexicities of the issue at hand we must first look at what cause inland seas. According to the geographic descrptions,it was more than likely a result of tectonic plates shifting during the developement of our current landmass positions. When they shift,the land can either sinkor have its ocean basins fill with water from flooding.This is called Transgression.Either case causes a developement of a salty body of water with aquatic animals trapped inside.Being that is surrounded by a desert-like biome,itis more likely to be the result of the tectonic plates spreading, causing the land to sink and fill in with salt water.As this occurs, prey animals will thrive through a lack of predators, such as smaller fish.This enables the fishing industry to boom as it did. The fishing trade in this area is at risk of falling.when humans alter systems such as this one,their stabilty declines.For a while this was more than likely a self- sustaining environment.The implementation of irrigation systemshave first,affected the wildlife surrounding the inland sea, which was assisting its survival. Every animal plays a role in the ecosystem.When the industries were built around the body of water, the land ecosystem suffered.As a result, the fish in the corresponding water will eventually suffer.Being a self- sustaining system, it will keep water cycling by itself. When the system was built for local farmers, water supplies were being pulled from the natural made sea and into other locations. this is normally fine for areas,but in one such as this,without any natural made filtering system, it will begin losing water. the process will takea while due to the water cycle consistently adding some back,but will occur. As the water levels decrease,so will the fish.This is the cause of research number two. With an increasing salinity count,the pHof the water and soil will change as well. Adding salt to the soil as it is doing through wind patterns, slowly crops, which once thrived in the surrounding land,will begin todeplete.Not all plants require the same nutrient levels..If the farmer \'s crops are thriving now, with lower salinity counts and lower pH\'s then the same crops will not grow as well in higher salt concentrations and higher pH\'values .Another factor affecting local farmers as well as the fishermen is the pesticides and chemicals.These will not only affect the water\'s pH ,it will also affect the stability of the water for the fish to live in.As more chemicals and sewage are added to a body of water , the fish have no choice but to take in those hazardous wastes. At first, humans will grow sick of ill- prepared fish. Second,the fish will slowly begin to die off causing the fishermen to lose a source of income. The future of this environment is devasting. Local animals , which do use the sea as a source of food ,will inadvertently be affected as well . While these animals may be capable of migrating , they cannot move far into a desert w.
To understand the complexicities of the issue at hand we must first .pdf
To understand the complexicities of the issue at hand we must first .pdf
apleathers
The P is the present value of the cash flow stream P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3 = 207.36 Solution The P is the present value of the cash flow stream P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3 = 207.36.
The P is the present value of the cash flow streamP = 100 (1+10.pdf
The P is the present value of the cash flow streamP = 100 (1+10.pdf
apleathers
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the glycosidic linkage with the N 1 of the nitrogenous base. 14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the diphosphopyridine molecules, which having significant function in the cell. Functions of Mono nucleotides: Other functions used in molecular research studies like : Solution Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the glycosidic linkage with the N 1 of the nitrogenous base. 14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the diphosphopyridine molecules, which having significant function in the cell. Functions of Mono nucleotides: Other functions used in molecular research studies like :.
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
apleathers
Ques-1: Prenatal diagnosis has both positive and potentially negative consequences. While it is most often used to detect serious problems with the fetus, the technology can also be used potentially to select embryos based on sex, appearance, Where do you think we should draw the line in allowing parents to use prenatal diagnosis Answer: Genetic testing is performed for prenatal diagnosis to know any chromosomal or genetical - inherited abnormalities of implanted human embryo. It has positive consequence, as some couples would like to avoid getting a baby with genetic abnormalities. However, there are negative consequences such as various \"ethical and moral issues of prenatal diagnosis as explained below. Therefore, it is crucial to draw a line when conducting prenatal diagnosis finally a couple musty get legal permissions to undergo prenatal diagnosis. Screening tests for genetic issues can be performed in the first trimester, second trimester or both trimesters. Carrier testing is also an option performed prior to or during pregnancy. Carrier testing provides information as to whether one or both parents are carriers for certain inherited disorders. The results of these tests are used to determine an appropriate plan of care for the patient. Genetic testing of the fetus and the parents offers both opportunities and ethical challenges. As a Registered Nurse, you need to be aware of your own feelings in order to provide non-biased professional support. Implications of genetic testing: Genetic testing is the pre-implantation technology is now currently using in detecting and screening embryo in order to assess whether the resultant embryos from fertilization are normal or abnormal genotypically. A registered nurse must advice & support to a couple seeking guidance about the genetic testing because genetic screening has various ethical and moral aspects. The major rising ethical challenge is the connection between the pre-selection of embryos based on meticulous genetic analysis followed by rising discrimination of disabled people. This ethical problem is associated with selection of future children based on their low levels of disabilities and abnormalities. Ethical challenges with preimplantation of genetic testing or diagnosis (PGD): 1. PGD allows embryo selection after pregnancy or even before initiation of pregnancy. However, this procedure is very controversial and faces a variety of moral ethics that are completely relies upon moral status of embryo and prenatal diagnosis in selecting progeny without the use of abortion (medical issue). 2. The major rising ethical challenge is the connection between the pre-selection of embryos based on meticulous genetic analysis followed by rising discrimination of disabled people, a psychological moral issue. This ethical problem is associated with selection of future children based on their low levels of disabilities and abnormalities. A clinic should have license primarily to perform preimplantatio.
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
apleathers
Question: What are the elements of safe drinking water act? What are the aspect & provision for safe drinking water act? Solution : This act was passed in 2002. The main elements imposes in the act are providing the permissible limit of contaminants in drinking water i.e. drinking water standard, establishes the rule for operators of facilities, for drinking water systems, for laboratories that dealt with the drinking water parameter testing, training & certification to operators & there are many other elements that require for safe drinking purpose. Its main aspect is to ensure the safety of consumers by drinking the potable water (the water contain the contaminants up to prescribed limit given in the act. By consuming the potable water, the diseases associated due to drinking of polluted water are minimized. There are three parameters are described in the act. These are physical parameters, chemical parameters, & biological parameters. Physical parameter includes suspended solid, turbidity, dissolved solid, pH, hardness, acidity, alkanity etc. The chemical parameters include BOD, COD, ThOD, DO, etc. The biological parameter includes E.coli, B.Coli bacteria, pathogenic bacteria, disease causing bacteria. Amongst, three bacteria, it’s the biological parameters which are very objectionable. The upper limit of this parameters are prescribed in the act upto which the water are drinkable. Note: All pollutant water are contaminants but its not necessary that all contaminant are pollutant..
QuestionWhat are the elements of safe drinking water act What ar.pdf
QuestionWhat are the elements of safe drinking water act What ar.pdf
apleathers
Program: import java.util.*; import java.io.*; class FoodTruck { String truckName; double fuelintruck; int numberofemplyees; String menuItems[]=new String[5]; public void getData() { Scanner s=new Scanner(System.in); System.out.print(\"Enter TruckName\"); truckName=s.next(); System.out.print(\"Enter Fuel in Tank \"); fuelintruck=s.nextDouble(); System.out.print(\"Enter number of employess in truck\"); numberofemplyees=s.nextInt(); System.out.print(\"Enter Menu Items\"); for(int i=0;i<5;i++) menuItems[i]=s.next(); } public void ckeckfuel() { if(fuelintruck<2.5) System.out.println(\"Please refill your truck\"); else System.out.println(\"Fuel is enough\"); } public void displayMenu() { try { FileOutputStream fout=new FileOutputStream(\"Menu.txt\"); for(int i=0;i<5;i++) { byte b[]=menuItems[i].getBytes(); fout.write(b); System.out.println(menuItems[i]); } } catch(IOException e) { System.out.println(e.getMessage()); } } } public class MyTruck1 { public static void main(String ar[]) { FoodTruck ft=new FoodTruck(); ft.getData(); ft.ckeckfuel(); ft.displayMenu(); } } Output: Enter TruckNameFoodpanda Enter Fuel in Tank 25.4 Enter number of employess in truck5 Enter Menu Itemssabji dal papad noodels paneer Fuel is enough sabji dal papad noodels paneer Solution Program: import java.util.*; import java.io.*; class FoodTruck { String truckName; double fuelintruck; int numberofemplyees; String menuItems[]=new String[5]; public void getData() { Scanner s=new Scanner(System.in); System.out.print(\"Enter TruckName\"); truckName=s.next(); System.out.print(\"Enter Fuel in Tank \"); fuelintruck=s.nextDouble(); System.out.print(\"Enter number of employess in truck\"); numberofemplyees=s.nextInt(); System.out.print(\"Enter Menu Items\"); for(int i=0;i<5;i++) menuItems[i]=s.next(); } public void ckeckfuel() { if(fuelintruck<2.5) System.out.println(\"Please refill your truck\"); else System.out.println(\"Fuel is enough\"); } public void displayMenu() { try { FileOutputStream fout=new FileOutputStream(\"Menu.txt\"); for(int i=0;i<5;i++) { byte b[]=menuItems[i].getBytes(); fout.write(b); System.out.println(menuItems[i]); } } catch(IOException e) { System.out.println(e.getMessage()); } } } public class MyTruck1 { public static void main(String ar[]) { FoodTruck ft=new FoodTruck(); ft.getData(); ft.ckeckfuel(); ft.displayMenu(); } } Output: Enter TruckNameFoodpanda Enter Fuel in Tank 25.4 Enter number of employess in truck5 Enter Menu Itemssabji dal papad noodels paneer Fuel is enough sabji dal papad noodels paneer.
Programimport java.util.; import java.io.; class FoodTruck.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
apleathers
Please follow the data and description : Active Directory : In general the Active Directory is abbrevated as AD and is a directory service that Microsoft developed for Windows domain networks. It is included in most of the available Windows Server operating systems as a set of processes and services. Considerations for designing a Active Directory : Before moving on directly to the planning ang implementation of the Active Directory we just need to get some major factors and their considerations into account so as to handle them perfectly. When we are designing the Active Directory network, it is important to use the four divisions (forests, domains, organizational units, and sites) to their maximum potential. Some of the important factors/considerations are described below : a) Active Directory elements : When designing an Active Directory, we need to be completely clear of what each element or part actually means and how it fits into the overall design. b) Active Directory forest : In general, the forest, in terms of Active Directory, basically means every domain, organizational unit, and any other object stored within its database. The forest is the absolute top level of the Active Directory infrastructure. We can have more than one forest in a company, which actually represent the high level security boundaries, and can therefore improve security between different business units or companies belonging to a single organization. The point behind the forest is that we have all our domains and domain tree within the organization itself contained within it. It is designed so that we can have a transitive links between all of the trees within one forest. c) Active Directory tree : A tree with reference to the Active Directory basically refers to a domain and all of its objects that merge into a single DNS name. d) Organizational Units and the Leaf Objects : In an Active Directory, Organizational Units abbrevated as OUs, which are also called as the Containers, and the Leaf Objects, which are of non-containing objects such as computer accounts and user accounts, are directly related. We can access the OUs and other objects through the Microsoft Management Console (MMC) or through the Users and Computers tool in the Administrative Tools. e) Active Directory Sites : The Sites and Services of the MMC is a utility that a lot of Windows administrators, particularly in smaller organizations, completely overlook. This part of Active Directory, however, is one of the most crucial parts to understand and implement correctly. These Sites give us a very unique and well-designed approach to separate specific locations within the Active Directory. As the principle of an Active Directory domain is global-meaning that it is meant to be the same anywhere-it could present a problem for users who move from office to office, or for offices with network connections that are slow. Active Directory sites allow one to specify the IP address spaces or subnets used with.
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description Active Directory In gen.pdf
apleathers
package DataStructures; public class HelloWorld > { public HelloWorld( ) { root = null; } public void insert( AnyType x ) { root = insert( x, root ); } public void remove( AnyType x ) { root = remove( x, root ); } public AnyType findMin( ) { if( isEmpty( ) ) System.out.println(\"tree is empty\"); return findMin( root ).element; } public AnyType findMax( ) { if( isEmpty( ) ) System.out.println(\"tree is empty\"); return findMax( root ).element; } public boolean contains( AnyType x ) { return contains( x, root ); } public void makeEmpty( ) { root = null; } public boolean isEmpty( ) { return root == null; } public void printTree( ) { if( isEmpty( ) ) System.out.println( \"Empty tree\" ); else printTree( root ); } private BinaryNode insert( AnyType x, BinaryNode t ) { if( t == null ) return new BinaryNode( x, null, null ); int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) t.left = insert( x, t.left ); else if( compareResult > 0 ) t.right = insert( x, t.right ); else ; // Duplicate; do nothing return t; } private BinaryNode remove( AnyType x, BinaryNode t ) { if( t == null ) return t; // Item not found; do nothing int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) t.left = remove( x, t.left ); else if( compareResult > 0 ) t.right = remove( x, t.right ); else if( t.left != null && t.right != null ) // Two children { t.element = findMin( t.right ).element; t.right = remove( t.element, t.right ); } else t = ( t.left != null ) ? t.left : t.right; return t; } private BinaryNode findMin( BinaryNode t ) { if( t == null ) return null; else if( t.left == null ) return t; return findMin( t.left ); } private BinaryNode findMax( BinaryNode t ) { if( t != null ) while( t.right != null ) t = t.right; return t; } private boolean contains( AnyType x, BinaryNode t ) { if( t == null ) return false; int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) return contains( x, t.left ); else if( compareResult > 0 ) return contains( x, t.right ); else return true; // Match } private void printTree( BinaryNode t ) { if( t != null ) { printTree( t.left ); System.out.println( t.element ); printTree( t.right ); } } private int height( BinaryNode t ) { if( t == null ) return -1; else return 1 + Math.max( height( t.left ), height( t.right ) ); } // Basic node stored in unbalanced binary search trees private static class BinaryNode { // Constructors BinaryNode( AnyType theElement ) { this( theElement, null, null ); } BinaryNode( AnyType theElement, BinaryNode lt, BinaryNode rt ) { element = theElement; left = lt; right = rt; } AnyType element; // The data in the node BinaryNode left; // Left child BinaryNode right; // Right child } /** The tree root. */ private BinaryNode root; public static void main( String [ ] args ) { HelloWorld t = new HelloWorld( ); final int NUMS = 4000; final int GAP = 37; System.out.println( \"Checking... (no more output means success)\" ); for( int i = GAP; i != 0; i = ( i + GAP ) % NUMS ) t.insert.
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
apleathers
it always attacks oxygen.the image doesnot work Solution it always attacks oxygen.the image doesnot work.
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
apleathers
import java.util.Scanner; public class Fraction { /** * instance variable */ private int numerator; /** * instance variable */ private int denominator; /** * param args */ public static void main(String[] args) { // TODO Auto-generated method stub final Fraction f1 = new Fraction(); final Fraction f2 = new Fraction(10, 15); final Fraction f3 = new Fraction(); Fraction f4 = new Fraction(); Fraction f5; f3.setNumerator(14); f3.setDenominator(16); f1.print(); f2.print(); f3.print(); // f1.get(); // f1.print(); f4.assign(12, 50); f4.print(); f5 = Fraction.multiply(f2, f4); f5.print(); System.out.println(\"\ f2: \"); f2.print(); f2.multiply(f4); System.out.println(\"\ f2: \"); f2.print(); } /** * default constructor * initlizing numerator with 0 and denominator with 1 */ public Fraction() { // System.out.println(\"In default construction\"); numerator = 0; denominator = 1; } /** * param n * param d */ public Fraction(final int n, final int d) { // System.out.println(\"In Parameter construction\"); numerator = n; denominator = d; } /** * return numerator */ public int getNumerator() { return numerator; } /** * param numerator */ public void setNumerator(final int numerator) { this.numerator = numerator; } /** * return denominator */ public int getDenominator() { return denominator; } /** * param denominator */ public void setDenominator(final int denominator) { this.denominator = denominator; } /** * print fraction */ public void print() { System.out.print(numerator + \"/\" + denominator + \" \"); } /** * */ public void get() { final Scanner kb = new Scanner(System.in); System.out.print(\"\ Enter numerator: \"); numerator = kb.nextInt(); System.out.print(\"Enter denominator: \"); denominator = kb.nextInt(); kb.close(); } /** * param n * param d */ public void assign(final int n, final int d) { if (d == 0) { throw new IllegalArgumentException(\"denominator can not be 0\"); } if (n < 0 || d < 0) { throw new IllegalArgumentException(\"values must be positive\"); } numerator = n; denominator = d; reduce(); } /** * it reduce numerator and denominator by GCD of numerator and denominator */ private void reduce() { int min = numerator; int gcd; if (numerator > denominator) { min = denominator; } for (gcd = min; gcd > 1; gcd--) { if (numerator % gcd == 0 && denominator % gcd == 0) { break; } } numerator = numerator / gcd; denominator = denominator / gcd; } /** * param f1 * param f2 * return f */ public static Fraction multiply(Fraction f1, Fraction f2) { Fraction f = new Fraction(); int num; int den; num = f1.getNumerator() * f2.getNumerator(); den = f1.getNumerator() * f2.getDenominator(); f.assign(num, den); f.reduce(); return f; } /** * param f */ public void multiply(Fraction f) { this.numerator = this.numerator * f.getNumerator(); this.denominator = this.denominator * f.getDenominator(); this.reduce(); return; } } Solution import java.util.Scanner; public class Fraction { /** * instance variable */ private int numerator; /** * instance variable */ priv.
import java.util.Scanner;public class Fraction { instan.pdf
import java.util.Scanner;public class Fraction { instan.pdf
apleathers
Hi, Please find the Ansswer below. //PLAYLIST.h #include #include #include #include using namespace std; class Playlist { private: string uniqueID; string songName; string artistName; int songLength; public: Playlist() { uniqueID = \"\", songName = \"\", artistName = \"\", songLength = 0; }; Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength); void InsertAfter(); void SetNext(); string GetID(); string GetSongName(); string GetArtistName(); int GetSongLength(); string GetNext(); void PrintPlaylistNode(); }; //PLAYLIST.CPP #include \"Playlist.h\" Playlist::Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength) { uniqueID = auniqueId; songName = asongName; artistName = aArtistName; songLength = aSongLength; } string Playlist::GetArtistName() { return artistName; } string Playlist::GetID() { return uniqueID; } string Playlist::GetSongName() { return songName; } int Playlist::GetSongLength() { return songLength; } void Playlist::SetNext() { } string Playlist::GetNext() { return \"\"; } void Playlist::InsertAfter() { } void Playlist::PrintPlaylistNode() { cout << \"Unique ID:\" << uniqueID << endl ; cout << \"Song Name:\" << songName << endl; cout << \"Artist Name:\" << artistName << endl; cout << \"Song Length (in seconds):\" << songLength << endl; } //PLAYSLITSNODE.h #pragma once #include \"Playlist.h\" #include class PlaylistNode { private: std::list library; Playlist get(list _list, int _i); void PrintPlaylist(Playlist aPlayList); public: void Addsong(Playlist aPlayslist); void Removesong(string aUnwiid); void Changeposition(int oldPostion, int anewPostion); void PrintSongByartist(string aAstist); void PrintSongtotalLen(); void PrintFullPlayList(); }; //PLAYLIST.CPP #include \"PlaylistNode.h\" void PlaylistNode::Addsong(Playlist aPlaylist) { library.push_back(aPlaylist); } void PlaylistNode::Removesong(string aUnwiid) { if (library.size > 0) { for (it = library.begin(); it != library.end(); ++it) { if (it->GetID() == aUnwiid) { cout << it->GetSongName() << endl; library.remove(*it); break; } } } } Playlist PlaylistNode::get(list _list, int _i) { list::iterator it = _list.begin(); for (int i = 0; i<_i; i++) { ++it; } return *it; } std::list::iterator it; void PlaylistNode::PrintFullPlayList() { for (it = library.begin(); it != library.end(); ++it) { PrintPlaylist(*it); } } void PlaylistNode::PrintSongByartist(string aartiename) { for (it = library.begin(); it != library.end(); ++it) { if(it->GetArtistName() == aartiename) PrintPlaylist(*it); } } void PlaylistNode::PrintSongtotalLen() { int TotalSonglengst = 0; for (it = library.begin(); it != library.end(); ++it) { TotalSonglengst += it->GetSongLength(); } cout << \"Total songs Length (in seconds):\" << TotalSonglengst << endl; } void PlaylistNode::PrintPlaylist(Playlist aPlayList) { cout << \"Unique ID:\" << aPlayList.GetID() << endl; cout << \"Song Name:\" << aPlayList.GetSongName() << endl; cout << \"Artist Name:\" << aPlayList.GetArtis.
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
apleathers
Family as a Social Institution: A family can be defined as group of two or more people living in a household and connected to each other by blood or adoption or marriage. Family as social constitution serves to create and maintain the family life in correct ways which are considered good by a society. It is not an objective institution as it serves to give shape to feeling and emotions of family memberns in fundamental ways. Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its members. These small families are supported by increasingly reducing sized homes and are easier to relocate. Further, small sized nuclear families can support the expensive education, medication and other services to their children in a much better way as compared to the large sized joint families. Existence and characteristics of family structures: Some of the common family structures with their characteristic features are as follows: 1: Nuclear family: The family with two generations i.e. parents and their children 2: Extended family: The family with three generations i.e. grandparents, parents and their children constitutes an extended family. 3: Single parent family: The family in which one parent and children are residing in same household is called as single parent family. 4: Reconstituted family: The family in which either or both of the parents have children from their previous marriage living together are called as reconstituted family. Characters of a family: A family is established by mating relation between man and woman through marriage institution. Marriage is foundation of family irrespetive of mating relationship without marriage. A family always resides in a common household wherein each family member has his own name. Hence, marriage, common household, nomenclature of family members, mode of interaction and communication and an economic provision are some of the characteristics of a family. Solution Family as a Social Institution: A family can be defined as group of two or more people living in a household and connected to each other by blood or adoption or marriage. Family as social constitution serves to create and maintain the family life in correct ways which are considered good by a society. It is not an objective institution as it serves to give shape to feeling and emotions of family memberns in fundamental ways. Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its members. These small families are supported by increasingly reducing sized homes and are easier to relocate. Further, small sized nuclear families can support the expensive education, medication and other services to their children in a much better way as compared to the large sized joint families. Existence and characteristics of family structures: Some of the common family structures with their characteristic features are as follows: 1: Nuclear family: The family with two generations i.e. parents and t.
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution A family can be defined as group of .pdf
apleathers
D. The actual development of new standards and protocols for the Internet is carried out by working groups chartered by the IETF. Answers A, B, and C are incorrect. Solution D. The actual development of new standards and protocols for the Internet is carried out by working groups chartered by the IETF. Answers A, B, and C are incorrect..
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Int.pdf
apleathers
Dependent Variable. A variable that depends on one or more other variables The dependent variable responds to the independent variable. It is called dependent because it \"depends\" on the independent variable. So Answer Is D Solution Dependent Variable. A variable that depends on one or more other variables The dependent variable responds to the independent variable. It is called dependent because it \"depends\" on the independent variable. So Answer Is D.
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
apleathers
C is correct. While all Layer 2 devices split collision domains, switches create a separate collision domain for each port. A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into two collision domains. D is incorrect. Solution C is correct. While all Layer 2 devices split collision domains, switches create a separate collision domain for each port. A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into two collision domains. D is incorrect..
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
apleathers
Answer. The following organisms are present in pod. 1. Prokaryotes, eg. Bacteria 2. Eukaryotes a. Algae (plants) b. Protozoans 3. Protists (unicellular eukaryotes) Solution Answer. The following organisms are present in pod. 1. Prokaryotes, eg. Bacteria 2. Eukaryotes a. Algae (plants) b. Protozoans 3. Protists (unicellular eukaryotes).
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
apleathers
Answer: The mobile elements are the elerments move form one place to other place, where the particular element is deficient. The deficiency of mobile elements first appear in older leave whereas the deficency of the immobile elements first appear in the younger leaves The immobile elements are iron, calcium, manganese, zinc, copper and boron Solution Answer: The mobile elements are the elerments move form one place to other place, where the particular element is deficient. The deficiency of mobile elements first appear in older leave whereas the deficency of the immobile elements first appear in the younger leaves The immobile elements are iron, calcium, manganese, zinc, copper and boron.
AnswerThe mobile elements are the elerments move form one place t.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
apleathers
Answer- high PCO2 Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions by carbonic acid auses a drop in pH. Solution Answer- high PCO2 Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions by carbonic acid auses a drop in pH..
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
apleathers
Ans: C These are like private addresses in IPv4b in that they are not meant to be routed Solution Ans: C These are like private addresses in IPv4b in that they are not meant to be routed.
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Ans CThese are like private addresses in IPv4b in that they are n.pdf
apleathers
Adherence to the geocentric model stemmed largely from several important observations. First of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should change considerably over the course of a year. If they did not appear to move, the stars are either much further away than the Sun and the planets than previously conceived, making their motion undetectable, or in reality they are not moving at all. Because the stars were actually much further away than Greek astronomers postulated (making movement extremely subtle), stellar parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the two explanations. The lack of any observable parallax was considered a fatal flaw in any non- geocentric theory. Another observation used in favor of the geocentric model at the time was the apparent consistency of Venus\' luminosity, which implies that it is usually about the same distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In reality, that is because the loss of light caused by Venus\' phases compensates for the increase in apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the natural tendency of terrestrial bodies to come to rest as near as possible to the center of the earth, and barring the opportunity to fall closer the center, not to move unless forced by an outside object, or transformed to a different element by heat or moisture. Solution Adherence to the geocentric model stemmed largely from several important observations. First of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should change considerably over the course of a year. If they did not appear to move, the stars are either much further away than the Sun and the planets than previously conceived, making their motion undetectable, or in reality they are not moving at all. Because the stars were actually much further away than Greek astronomers postulated (making movement extremely subtle), stellar parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the two explanations. The lack of any observable parallax was considered a fatal flaw in any non- geocentric theory. Another observation used in favor of the geocentric model at the time was the apparent consistency of Venus\' luminosity, which implies that it is usually about the same distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In reality, that is because the loss of light caused by Venus\' phases compensates for the increase in apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the natural tendency of terrestrial bodi.
Adherence to the geocentric model stemmed largely from several impo.pdf
Adherence to the geocentric model stemmed largely from several impo.pdf
apleathers
1. This situation can exist because companies vary as to whether they are using an implicit or ex- plicit set of assumptions when interest rates are disclosed. In the implicit approach, two or more assumptions do not individually represent the best estimate of the plan’s future experience with respect to these assumptions, but the aggregate effect of their combined use is presumed to be approximately the same as that of an explicit approach. In the explicit approach, each significant assumption reflecting the best estimate of the plan’s future experience solely with respect to that assumption must be stated. As a result, some companies are presently using an implicit approach, others an explicit approach. IAI19requires the use of explicit assumptions. As a result, this large variance in interest rates will probably disappear to some extent. However, it should be noted that companies will have some leeway in establishing discount rates. In addition, the expected return on assets will also be different among companies. 2. This situation will occur because of the pension liability required to be reported. That is, companies are required to report as a liability the excess of their defined benefit obligation over the fair value of plan assets and adjusted for unrecognized PSC and unexpected gains and losses. In the past, the basic liability companies reported was the excess of the amount expensed over the amount funded. 3. This statement is questionable. If a financial measure purports to represent a phenomenon that is volatile, the measure must show that volatility or it will not be representation ally faithful. Never-theless, many argue that volatility is inappropriate when dealing with such long-term measures as pensions. A good example of where dampening might be useful is the recognition of gains and losses. If assumptions prove to be accurate estimates of experience over a number of years, gains or losses in one year will be offset by losses or gains in subsequent periods, and amorti-zation of unrecognized gains and losses would be unnecessary. The main point is that volatility per se should not be considered undesirable when establishing accounting principles. Although some managements may consider volatility bad, this belief should not influence standard-setting. However, it is clear from some of the compromises made in IAS19that certain procedures were provided to dampen the volatility effect. 4. (a) In a defined contribution plan, the amount contributed is the amount expensed. No significant reporting problems exist here. On the other hand, defined benefit plans involve many difficult reporting issues which may lead to additional expense and liability recognition. Significant amendments will generally increase past service cost which may lead to significant adjustments to pension expense in the future. (b) Plan participants are of importance, because the expected future years of service com- putation can have an impact on the amortizati.
1.This situation can exist because companies vary as to whether th.pdf
1.This situation can exist because companies vary as to whether th.pdf
apleathers
1.) Which second degree polynomial function has a leading coefficient of Solution 1.) Which second degree polynomial function has a leading coefficient of.
1.) Which second degree polynomial function has a leading coefficien.pdf
1.) Which second degree polynomial function has a leading coefficien.pdf
apleathers
1. Alanine has molecular formula: C3H7NO2 Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00 = 89.1 g/mol 2. Arginine has molecular formula: C6H14N4O2 Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x atomic mass of O = 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00 = 174.2 g/mol 3. Phenylalanine has molecular formula: C9H11NO2 Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 = 165.2 g/mol 4. Tryptophan has molecular formula: C11H12N2O2 Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2 x atomic mass of O = 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00 = 204.2 g/mol 5. Methionine has molecular formula: C5H11NO2S Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O + 1 x atomic mass of S = 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07 = 149.2 g/mol Solution 1. Alanine has molecular formula: C3H7NO2 Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00 = 89.1 g/mol 2. Arginine has molecular formula: C6H14N4O2 Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x atomic mass of O = 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00 = 174.2 g/mol 3. Phenylalanine has molecular formula: C9H11NO2 Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 = 165.2 g/mol 4. Tryptophan has molecular formula: C11H12N2O2 Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2 x atomic mass of O = 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00 = 204.2 g/mol 5. Methionine has molecular formula: C5H11NO2S Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O + 1 x atomic mass of S = 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07 = 149.2 g/mol.
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
apleathers
Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene. Solution Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene..
Simple logic... The reason is the radical interme.pdf
Simple logic... The reason is the radical interme.pdf
apleathers
APM webinar hosted by the Scotland Network on 14 May 2024. Speakers: Chris Drysdale and Peter Huggett An interactive session discussing how Project Managers can identify mental health symptoms, provide tools to help themselves and others, plus also increase the capabilities of the Project Management function. This webinar was held on 14 May 2024. The covid-19 pandemic led to concerns about a worsening of mental health & wellbeing across the world and increased awareness in both society and the workplace. This webinar looks to advise the benefits of having a Mental Health First Aid function in the workplace whilst also providing tools and techniques that can be readily used and applied to yourself and colleagues. Additionally, there are wider benefits to Project Management which will be proposed and discussed.
Including Mental Health Support in Project Delivery, 14 May.pdf
Including Mental Health Support in Project Delivery, 14 May.pdf
Association for Project Management
Ancient Education-Modern Education-True Indian Education
AIM of Education-Teachers Training-2024.ppt
AIM of Education-Teachers Training-2024.ppt
Nishitharanjan Rout
More Related Content
More from apleathers
Question: What are the elements of safe drinking water act? What are the aspect & provision for safe drinking water act? Solution : This act was passed in 2002. The main elements imposes in the act are providing the permissible limit of contaminants in drinking water i.e. drinking water standard, establishes the rule for operators of facilities, for drinking water systems, for laboratories that dealt with the drinking water parameter testing, training & certification to operators & there are many other elements that require for safe drinking purpose. Its main aspect is to ensure the safety of consumers by drinking the potable water (the water contain the contaminants up to prescribed limit given in the act. By consuming the potable water, the diseases associated due to drinking of polluted water are minimized. There are three parameters are described in the act. These are physical parameters, chemical parameters, & biological parameters. Physical parameter includes suspended solid, turbidity, dissolved solid, pH, hardness, acidity, alkanity etc. The chemical parameters include BOD, COD, ThOD, DO, etc. The biological parameter includes E.coli, B.Coli bacteria, pathogenic bacteria, disease causing bacteria. Amongst, three bacteria, it’s the biological parameters which are very objectionable. The upper limit of this parameters are prescribed in the act upto which the water are drinkable. Note: All pollutant water are contaminants but its not necessary that all contaminant are pollutant..
QuestionWhat are the elements of safe drinking water act What ar.pdf
QuestionWhat are the elements of safe drinking water act What ar.pdf
apleathers
Program: import java.util.*; import java.io.*; class FoodTruck { String truckName; double fuelintruck; int numberofemplyees; String menuItems[]=new String[5]; public void getData() { Scanner s=new Scanner(System.in); System.out.print(\"Enter TruckName\"); truckName=s.next(); System.out.print(\"Enter Fuel in Tank \"); fuelintruck=s.nextDouble(); System.out.print(\"Enter number of employess in truck\"); numberofemplyees=s.nextInt(); System.out.print(\"Enter Menu Items\"); for(int i=0;i<5;i++) menuItems[i]=s.next(); } public void ckeckfuel() { if(fuelintruck<2.5) System.out.println(\"Please refill your truck\"); else System.out.println(\"Fuel is enough\"); } public void displayMenu() { try { FileOutputStream fout=new FileOutputStream(\"Menu.txt\"); for(int i=0;i<5;i++) { byte b[]=menuItems[i].getBytes(); fout.write(b); System.out.println(menuItems[i]); } } catch(IOException e) { System.out.println(e.getMessage()); } } } public class MyTruck1 { public static void main(String ar[]) { FoodTruck ft=new FoodTruck(); ft.getData(); ft.ckeckfuel(); ft.displayMenu(); } } Output: Enter TruckNameFoodpanda Enter Fuel in Tank 25.4 Enter number of employess in truck5 Enter Menu Itemssabji dal papad noodels paneer Fuel is enough sabji dal papad noodels paneer Solution Program: import java.util.*; import java.io.*; class FoodTruck { String truckName; double fuelintruck; int numberofemplyees; String menuItems[]=new String[5]; public void getData() { Scanner s=new Scanner(System.in); System.out.print(\"Enter TruckName\"); truckName=s.next(); System.out.print(\"Enter Fuel in Tank \"); fuelintruck=s.nextDouble(); System.out.print(\"Enter number of employess in truck\"); numberofemplyees=s.nextInt(); System.out.print(\"Enter Menu Items\"); for(int i=0;i<5;i++) menuItems[i]=s.next(); } public void ckeckfuel() { if(fuelintruck<2.5) System.out.println(\"Please refill your truck\"); else System.out.println(\"Fuel is enough\"); } public void displayMenu() { try { FileOutputStream fout=new FileOutputStream(\"Menu.txt\"); for(int i=0;i<5;i++) { byte b[]=menuItems[i].getBytes(); fout.write(b); System.out.println(menuItems[i]); } } catch(IOException e) { System.out.println(e.getMessage()); } } } public class MyTruck1 { public static void main(String ar[]) { FoodTruck ft=new FoodTruck(); ft.getData(); ft.ckeckfuel(); ft.displayMenu(); } } Output: Enter TruckNameFoodpanda Enter Fuel in Tank 25.4 Enter number of employess in truck5 Enter Menu Itemssabji dal papad noodels paneer Fuel is enough sabji dal papad noodels paneer.
Programimport java.util.; import java.io.; class FoodTruck.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
apleathers
Please follow the data and description : Active Directory : In general the Active Directory is abbrevated as AD and is a directory service that Microsoft developed for Windows domain networks. It is included in most of the available Windows Server operating systems as a set of processes and services. Considerations for designing a Active Directory : Before moving on directly to the planning ang implementation of the Active Directory we just need to get some major factors and their considerations into account so as to handle them perfectly. When we are designing the Active Directory network, it is important to use the four divisions (forests, domains, organizational units, and sites) to their maximum potential. Some of the important factors/considerations are described below : a) Active Directory elements : When designing an Active Directory, we need to be completely clear of what each element or part actually means and how it fits into the overall design. b) Active Directory forest : In general, the forest, in terms of Active Directory, basically means every domain, organizational unit, and any other object stored within its database. The forest is the absolute top level of the Active Directory infrastructure. We can have more than one forest in a company, which actually represent the high level security boundaries, and can therefore improve security between different business units or companies belonging to a single organization. The point behind the forest is that we have all our domains and domain tree within the organization itself contained within it. It is designed so that we can have a transitive links between all of the trees within one forest. c) Active Directory tree : A tree with reference to the Active Directory basically refers to a domain and all of its objects that merge into a single DNS name. d) Organizational Units and the Leaf Objects : In an Active Directory, Organizational Units abbrevated as OUs, which are also called as the Containers, and the Leaf Objects, which are of non-containing objects such as computer accounts and user accounts, are directly related. We can access the OUs and other objects through the Microsoft Management Console (MMC) or through the Users and Computers tool in the Administrative Tools. e) Active Directory Sites : The Sites and Services of the MMC is a utility that a lot of Windows administrators, particularly in smaller organizations, completely overlook. This part of Active Directory, however, is one of the most crucial parts to understand and implement correctly. These Sites give us a very unique and well-designed approach to separate specific locations within the Active Directory. As the principle of an Active Directory domain is global-meaning that it is meant to be the same anywhere-it could present a problem for users who move from office to office, or for offices with network connections that are slow. Active Directory sites allow one to specify the IP address spaces or subnets used with.
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description Active Directory In gen.pdf
apleathers
package DataStructures; public class HelloWorld > { public HelloWorld( ) { root = null; } public void insert( AnyType x ) { root = insert( x, root ); } public void remove( AnyType x ) { root = remove( x, root ); } public AnyType findMin( ) { if( isEmpty( ) ) System.out.println(\"tree is empty\"); return findMin( root ).element; } public AnyType findMax( ) { if( isEmpty( ) ) System.out.println(\"tree is empty\"); return findMax( root ).element; } public boolean contains( AnyType x ) { return contains( x, root ); } public void makeEmpty( ) { root = null; } public boolean isEmpty( ) { return root == null; } public void printTree( ) { if( isEmpty( ) ) System.out.println( \"Empty tree\" ); else printTree( root ); } private BinaryNode insert( AnyType x, BinaryNode t ) { if( t == null ) return new BinaryNode( x, null, null ); int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) t.left = insert( x, t.left ); else if( compareResult > 0 ) t.right = insert( x, t.right ); else ; // Duplicate; do nothing return t; } private BinaryNode remove( AnyType x, BinaryNode t ) { if( t == null ) return t; // Item not found; do nothing int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) t.left = remove( x, t.left ); else if( compareResult > 0 ) t.right = remove( x, t.right ); else if( t.left != null && t.right != null ) // Two children { t.element = findMin( t.right ).element; t.right = remove( t.element, t.right ); } else t = ( t.left != null ) ? t.left : t.right; return t; } private BinaryNode findMin( BinaryNode t ) { if( t == null ) return null; else if( t.left == null ) return t; return findMin( t.left ); } private BinaryNode findMax( BinaryNode t ) { if( t != null ) while( t.right != null ) t = t.right; return t; } private boolean contains( AnyType x, BinaryNode t ) { if( t == null ) return false; int compareResult = x.compareTo( t.element ); if( compareResult < 0 ) return contains( x, t.left ); else if( compareResult > 0 ) return contains( x, t.right ); else return true; // Match } private void printTree( BinaryNode t ) { if( t != null ) { printTree( t.left ); System.out.println( t.element ); printTree( t.right ); } } private int height( BinaryNode t ) { if( t == null ) return -1; else return 1 + Math.max( height( t.left ), height( t.right ) ); } // Basic node stored in unbalanced binary search trees private static class BinaryNode { // Constructors BinaryNode( AnyType theElement ) { this( theElement, null, null ); } BinaryNode( AnyType theElement, BinaryNode lt, BinaryNode rt ) { element = theElement; left = lt; right = rt; } AnyType element; // The data in the node BinaryNode left; // Left child BinaryNode right; // Right child } /** The tree root. */ private BinaryNode root; public static void main( String [ ] args ) { HelloWorld t = new HelloWorld( ); final int NUMS = 4000; final int GAP = 37; System.out.println( \"Checking... (no more output means success)\" ); for( int i = GAP; i != 0; i = ( i + GAP ) % NUMS ) t.insert.
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
apleathers
it always attacks oxygen.the image doesnot work Solution it always attacks oxygen.the image doesnot work.
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
apleathers
import java.util.Scanner; public class Fraction { /** * instance variable */ private int numerator; /** * instance variable */ private int denominator; /** * param args */ public static void main(String[] args) { // TODO Auto-generated method stub final Fraction f1 = new Fraction(); final Fraction f2 = new Fraction(10, 15); final Fraction f3 = new Fraction(); Fraction f4 = new Fraction(); Fraction f5; f3.setNumerator(14); f3.setDenominator(16); f1.print(); f2.print(); f3.print(); // f1.get(); // f1.print(); f4.assign(12, 50); f4.print(); f5 = Fraction.multiply(f2, f4); f5.print(); System.out.println(\"\ f2: \"); f2.print(); f2.multiply(f4); System.out.println(\"\ f2: \"); f2.print(); } /** * default constructor * initlizing numerator with 0 and denominator with 1 */ public Fraction() { // System.out.println(\"In default construction\"); numerator = 0; denominator = 1; } /** * param n * param d */ public Fraction(final int n, final int d) { // System.out.println(\"In Parameter construction\"); numerator = n; denominator = d; } /** * return numerator */ public int getNumerator() { return numerator; } /** * param numerator */ public void setNumerator(final int numerator) { this.numerator = numerator; } /** * return denominator */ public int getDenominator() { return denominator; } /** * param denominator */ public void setDenominator(final int denominator) { this.denominator = denominator; } /** * print fraction */ public void print() { System.out.print(numerator + \"/\" + denominator + \" \"); } /** * */ public void get() { final Scanner kb = new Scanner(System.in); System.out.print(\"\ Enter numerator: \"); numerator = kb.nextInt(); System.out.print(\"Enter denominator: \"); denominator = kb.nextInt(); kb.close(); } /** * param n * param d */ public void assign(final int n, final int d) { if (d == 0) { throw new IllegalArgumentException(\"denominator can not be 0\"); } if (n < 0 || d < 0) { throw new IllegalArgumentException(\"values must be positive\"); } numerator = n; denominator = d; reduce(); } /** * it reduce numerator and denominator by GCD of numerator and denominator */ private void reduce() { int min = numerator; int gcd; if (numerator > denominator) { min = denominator; } for (gcd = min; gcd > 1; gcd--) { if (numerator % gcd == 0 && denominator % gcd == 0) { break; } } numerator = numerator / gcd; denominator = denominator / gcd; } /** * param f1 * param f2 * return f */ public static Fraction multiply(Fraction f1, Fraction f2) { Fraction f = new Fraction(); int num; int den; num = f1.getNumerator() * f2.getNumerator(); den = f1.getNumerator() * f2.getDenominator(); f.assign(num, den); f.reduce(); return f; } /** * param f */ public void multiply(Fraction f) { this.numerator = this.numerator * f.getNumerator(); this.denominator = this.denominator * f.getDenominator(); this.reduce(); return; } } Solution import java.util.Scanner; public class Fraction { /** * instance variable */ private int numerator; /** * instance variable */ priv.
import java.util.Scanner;public class Fraction { instan.pdf
import java.util.Scanner;public class Fraction { instan.pdf
apleathers
Hi, Please find the Ansswer below. //PLAYLIST.h #include #include #include #include using namespace std; class Playlist { private: string uniqueID; string songName; string artistName; int songLength; public: Playlist() { uniqueID = \"\", songName = \"\", artistName = \"\", songLength = 0; }; Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength); void InsertAfter(); void SetNext(); string GetID(); string GetSongName(); string GetArtistName(); int GetSongLength(); string GetNext(); void PrintPlaylistNode(); }; //PLAYLIST.CPP #include \"Playlist.h\" Playlist::Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength) { uniqueID = auniqueId; songName = asongName; artistName = aArtistName; songLength = aSongLength; } string Playlist::GetArtistName() { return artistName; } string Playlist::GetID() { return uniqueID; } string Playlist::GetSongName() { return songName; } int Playlist::GetSongLength() { return songLength; } void Playlist::SetNext() { } string Playlist::GetNext() { return \"\"; } void Playlist::InsertAfter() { } void Playlist::PrintPlaylistNode() { cout << \"Unique ID:\" << uniqueID << endl ; cout << \"Song Name:\" << songName << endl; cout << \"Artist Name:\" << artistName << endl; cout << \"Song Length (in seconds):\" << songLength << endl; } //PLAYSLITSNODE.h #pragma once #include \"Playlist.h\" #include class PlaylistNode { private: std::list library; Playlist get(list _list, int _i); void PrintPlaylist(Playlist aPlayList); public: void Addsong(Playlist aPlayslist); void Removesong(string aUnwiid); void Changeposition(int oldPostion, int anewPostion); void PrintSongByartist(string aAstist); void PrintSongtotalLen(); void PrintFullPlayList(); }; //PLAYLIST.CPP #include \"PlaylistNode.h\" void PlaylistNode::Addsong(Playlist aPlaylist) { library.push_back(aPlaylist); } void PlaylistNode::Removesong(string aUnwiid) { if (library.size > 0) { for (it = library.begin(); it != library.end(); ++it) { if (it->GetID() == aUnwiid) { cout << it->GetSongName() << endl; library.remove(*it); break; } } } } Playlist PlaylistNode::get(list _list, int _i) { list::iterator it = _list.begin(); for (int i = 0; i<_i; i++) { ++it; } return *it; } std::list::iterator it; void PlaylistNode::PrintFullPlayList() { for (it = library.begin(); it != library.end(); ++it) { PrintPlaylist(*it); } } void PlaylistNode::PrintSongByartist(string aartiename) { for (it = library.begin(); it != library.end(); ++it) { if(it->GetArtistName() == aartiename) PrintPlaylist(*it); } } void PlaylistNode::PrintSongtotalLen() { int TotalSonglengst = 0; for (it = library.begin(); it != library.end(); ++it) { TotalSonglengst += it->GetSongLength(); } cout << \"Total songs Length (in seconds):\" << TotalSonglengst << endl; } void PlaylistNode::PrintPlaylist(Playlist aPlayList) { cout << \"Unique ID:\" << aPlayList.GetID() << endl; cout << \"Song Name:\" << aPlayList.GetSongName() << endl; cout << \"Artist Name:\" << aPlayList.GetArtis.
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
apleathers
Family as a Social Institution: A family can be defined as group of two or more people living in a household and connected to each other by blood or adoption or marriage. Family as social constitution serves to create and maintain the family life in correct ways which are considered good by a society. It is not an objective institution as it serves to give shape to feeling and emotions of family memberns in fundamental ways. Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its members. These small families are supported by increasingly reducing sized homes and are easier to relocate. Further, small sized nuclear families can support the expensive education, medication and other services to their children in a much better way as compared to the large sized joint families. Existence and characteristics of family structures: Some of the common family structures with their characteristic features are as follows: 1: Nuclear family: The family with two generations i.e. parents and their children 2: Extended family: The family with three generations i.e. grandparents, parents and their children constitutes an extended family. 3: Single parent family: The family in which one parent and children are residing in same household is called as single parent family. 4: Reconstituted family: The family in which either or both of the parents have children from their previous marriage living together are called as reconstituted family. Characters of a family: A family is established by mating relation between man and woman through marriage institution. Marriage is foundation of family irrespetive of mating relationship without marriage. A family always resides in a common household wherein each family member has his own name. Hence, marriage, common household, nomenclature of family members, mode of interaction and communication and an economic provision are some of the characteristics of a family. Solution Family as a Social Institution: A family can be defined as group of two or more people living in a household and connected to each other by blood or adoption or marriage. Family as social constitution serves to create and maintain the family life in correct ways which are considered good by a society. It is not an objective institution as it serves to give shape to feeling and emotions of family memberns in fundamental ways. Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its members. These small families are supported by increasingly reducing sized homes and are easier to relocate. Further, small sized nuclear families can support the expensive education, medication and other services to their children in a much better way as compared to the large sized joint families. Existence and characteristics of family structures: Some of the common family structures with their characteristic features are as follows: 1: Nuclear family: The family with two generations i.e. parents and t.
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution A family can be defined as group of .pdf
apleathers
D. The actual development of new standards and protocols for the Internet is carried out by working groups chartered by the IETF. Answers A, B, and C are incorrect. Solution D. The actual development of new standards and protocols for the Internet is carried out by working groups chartered by the IETF. Answers A, B, and C are incorrect..
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Int.pdf
apleathers
Dependent Variable. A variable that depends on one or more other variables The dependent variable responds to the independent variable. It is called dependent because it \"depends\" on the independent variable. So Answer Is D Solution Dependent Variable. A variable that depends on one or more other variables The dependent variable responds to the independent variable. It is called dependent because it \"depends\" on the independent variable. So Answer Is D.
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
apleathers
C is correct. While all Layer 2 devices split collision domains, switches create a separate collision domain for each port. A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into two collision domains. D is incorrect. Solution C is correct. While all Layer 2 devices split collision domains, switches create a separate collision domain for each port. A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into two collision domains. D is incorrect..
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
apleathers
Answer. The following organisms are present in pod. 1. Prokaryotes, eg. Bacteria 2. Eukaryotes a. Algae (plants) b. Protozoans 3. Protists (unicellular eukaryotes) Solution Answer. The following organisms are present in pod. 1. Prokaryotes, eg. Bacteria 2. Eukaryotes a. Algae (plants) b. Protozoans 3. Protists (unicellular eukaryotes).
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
apleathers
Answer: The mobile elements are the elerments move form one place to other place, where the particular element is deficient. The deficiency of mobile elements first appear in older leave whereas the deficency of the immobile elements first appear in the younger leaves The immobile elements are iron, calcium, manganese, zinc, copper and boron Solution Answer: The mobile elements are the elerments move form one place to other place, where the particular element is deficient. The deficiency of mobile elements first appear in older leave whereas the deficency of the immobile elements first appear in the younger leaves The immobile elements are iron, calcium, manganese, zinc, copper and boron.
AnswerThe mobile elements are the elerments move form one place t.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
apleathers
Answer- high PCO2 Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions by carbonic acid auses a drop in pH. Solution Answer- high PCO2 Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions by carbonic acid auses a drop in pH..
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
apleathers
Ans: C These are like private addresses in IPv4b in that they are not meant to be routed Solution Ans: C These are like private addresses in IPv4b in that they are not meant to be routed.
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Ans CThese are like private addresses in IPv4b in that they are n.pdf
apleathers
Adherence to the geocentric model stemmed largely from several important observations. First of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should change considerably over the course of a year. If they did not appear to move, the stars are either much further away than the Sun and the planets than previously conceived, making their motion undetectable, or in reality they are not moving at all. Because the stars were actually much further away than Greek astronomers postulated (making movement extremely subtle), stellar parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the two explanations. The lack of any observable parallax was considered a fatal flaw in any non- geocentric theory. Another observation used in favor of the geocentric model at the time was the apparent consistency of Venus\' luminosity, which implies that it is usually about the same distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In reality, that is because the loss of light caused by Venus\' phases compensates for the increase in apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the natural tendency of terrestrial bodies to come to rest as near as possible to the center of the earth, and barring the opportunity to fall closer the center, not to move unless forced by an outside object, or transformed to a different element by heat or moisture. Solution Adherence to the geocentric model stemmed largely from several important observations. First of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should change considerably over the course of a year. If they did not appear to move, the stars are either much further away than the Sun and the planets than previously conceived, making their motion undetectable, or in reality they are not moving at all. Because the stars were actually much further away than Greek astronomers postulated (making movement extremely subtle), stellar parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the two explanations. The lack of any observable parallax was considered a fatal flaw in any non- geocentric theory. Another observation used in favor of the geocentric model at the time was the apparent consistency of Venus\' luminosity, which implies that it is usually about the same distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In reality, that is because the loss of light caused by Venus\' phases compensates for the increase in apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the natural tendency of terrestrial bodi.
Adherence to the geocentric model stemmed largely from several impo.pdf
Adherence to the geocentric model stemmed largely from several impo.pdf
apleathers
1. This situation can exist because companies vary as to whether they are using an implicit or ex- plicit set of assumptions when interest rates are disclosed. In the implicit approach, two or more assumptions do not individually represent the best estimate of the plan’s future experience with respect to these assumptions, but the aggregate effect of their combined use is presumed to be approximately the same as that of an explicit approach. In the explicit approach, each significant assumption reflecting the best estimate of the plan’s future experience solely with respect to that assumption must be stated. As a result, some companies are presently using an implicit approach, others an explicit approach. IAI19requires the use of explicit assumptions. As a result, this large variance in interest rates will probably disappear to some extent. However, it should be noted that companies will have some leeway in establishing discount rates. In addition, the expected return on assets will also be different among companies. 2. This situation will occur because of the pension liability required to be reported. That is, companies are required to report as a liability the excess of their defined benefit obligation over the fair value of plan assets and adjusted for unrecognized PSC and unexpected gains and losses. In the past, the basic liability companies reported was the excess of the amount expensed over the amount funded. 3. This statement is questionable. If a financial measure purports to represent a phenomenon that is volatile, the measure must show that volatility or it will not be representation ally faithful. Never-theless, many argue that volatility is inappropriate when dealing with such long-term measures as pensions. A good example of where dampening might be useful is the recognition of gains and losses. If assumptions prove to be accurate estimates of experience over a number of years, gains or losses in one year will be offset by losses or gains in subsequent periods, and amorti-zation of unrecognized gains and losses would be unnecessary. The main point is that volatility per se should not be considered undesirable when establishing accounting principles. Although some managements may consider volatility bad, this belief should not influence standard-setting. However, it is clear from some of the compromises made in IAS19that certain procedures were provided to dampen the volatility effect. 4. (a) In a defined contribution plan, the amount contributed is the amount expensed. No significant reporting problems exist here. On the other hand, defined benefit plans involve many difficult reporting issues which may lead to additional expense and liability recognition. Significant amendments will generally increase past service cost which may lead to significant adjustments to pension expense in the future. (b) Plan participants are of importance, because the expected future years of service com- putation can have an impact on the amortizati.
1.This situation can exist because companies vary as to whether th.pdf
1.This situation can exist because companies vary as to whether th.pdf
apleathers
1.) Which second degree polynomial function has a leading coefficient of Solution 1.) Which second degree polynomial function has a leading coefficient of.
1.) Which second degree polynomial function has a leading coefficien.pdf
1.) Which second degree polynomial function has a leading coefficien.pdf
apleathers
1. Alanine has molecular formula: C3H7NO2 Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00 = 89.1 g/mol 2. Arginine has molecular formula: C6H14N4O2 Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x atomic mass of O = 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00 = 174.2 g/mol 3. Phenylalanine has molecular formula: C9H11NO2 Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 = 165.2 g/mol 4. Tryptophan has molecular formula: C11H12N2O2 Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2 x atomic mass of O = 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00 = 204.2 g/mol 5. Methionine has molecular formula: C5H11NO2S Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O + 1 x atomic mass of S = 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07 = 149.2 g/mol Solution 1. Alanine has molecular formula: C3H7NO2 Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00 = 89.1 g/mol 2. Arginine has molecular formula: C6H14N4O2 Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x atomic mass of O = 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00 = 174.2 g/mol 3. Phenylalanine has molecular formula: C9H11NO2 Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O = 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 = 165.2 g/mol 4. Tryptophan has molecular formula: C11H12N2O2 Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2 x atomic mass of O = 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00 = 204.2 g/mol 5. Methionine has molecular formula: C5H11NO2S Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x atomic mass of O + 1 x atomic mass of S = 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07 = 149.2 g/mol.
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
apleathers
Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene. Solution Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene..
Simple logic... The reason is the radical interme.pdf
Simple logic... The reason is the radical interme.pdf
apleathers
More from apleathers
(20)
QuestionWhat are the elements of safe drinking water act What ar.pdf
QuestionWhat are the elements of safe drinking water act What ar.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description Active Directory In gen.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
import java.util.Scanner;public class Fraction { instan.pdf
import java.util.Scanner;public class Fraction { instan.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution A family can be defined as group of .pdf
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Int.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Adherence to the geocentric model stemmed largely from several impo.pdf
Adherence to the geocentric model stemmed largely from several impo.pdf
1.This situation can exist because companies vary as to whether th.pdf
1.This situation can exist because companies vary as to whether th.pdf
1.) Which second degree polynomial function has a leading coefficien.pdf
1.) Which second degree polynomial function has a leading coefficien.pdf
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
Simple logic... The reason is the radical interme.pdf
Simple logic... The reason is the radical interme.pdf
Recently uploaded
APM webinar hosted by the Scotland Network on 14 May 2024. Speakers: Chris Drysdale and Peter Huggett An interactive session discussing how Project Managers can identify mental health symptoms, provide tools to help themselves and others, plus also increase the capabilities of the Project Management function. This webinar was held on 14 May 2024. The covid-19 pandemic led to concerns about a worsening of mental health & wellbeing across the world and increased awareness in both society and the workplace. This webinar looks to advise the benefits of having a Mental Health First Aid function in the workplace whilst also providing tools and techniques that can be readily used and applied to yourself and colleagues. Additionally, there are wider benefits to Project Management which will be proposed and discussed.
Including Mental Health Support in Project Delivery, 14 May.pdf
Including Mental Health Support in Project Delivery, 14 May.pdf
Association for Project Management
Ancient Education-Modern Education-True Indian Education
AIM of Education-Teachers Training-2024.ppt
AIM of Education-Teachers Training-2024.ppt
Nishitharanjan Rout
Telehealth.org's slide deck for PSYPACT- Practicing Over State Lines LIVE event.
PSYPACT- Practicing Over State Lines May 2024.pptx
PSYPACT- Practicing Over State Lines May 2024.pptx
Marlene Maheu
This presentation was provided by William Mattingly of the Smithsonian Institution, during the fifth segment of the NISO training series "AI & Prompt Design." Session Five: Named Entity Recognition with LLMs, was held on May 2, 2024.
Mattingly "AI & Prompt Design: Named Entity Recognition"
Mattingly "AI & Prompt Design: Named Entity Recognition"
National Information Standards Organization (NISO)
Slides from the launch of the final report from our QAA Collaborative Enhancement project, 'When Quality Assurance Meets Innovation in Higher Education' 14 May 2024
When Quality Assurance Meets Innovation in Higher Education - Report launch w...
When Quality Assurance Meets Innovation in Higher Education - Report launch w...
Gary Wood
EADTU-EU Summit 2024
Personalisation of Education by AI and Big Data - Lourdes Guàrdia
Personalisation of Education by AI and Big Data - Lourdes Guàrdia
EADTU
Program code examples (known also as worked examples) play a crucial role in learning how to program. Instructors use examples extensively to demonstrate the semantics of the programming language being taught and to highlight the fundamental coding patterns. Programming textbooks allocate considerable space to present and explain code examples. To make the process of studying code examples more interactive, CS education researchers developed a range of tools to engage students in the study of code examples. These tools include codecasts (codemotion,codecast,elicasts), interactive example explorers (WebEx, PCEX), and tutoring systems (DeepTutor). An important component in all types of worked examples is code explanations associated with specific code lines or code chunks of an example. The explanations connect examples with general programming knowledge explaining the role and function of code fragments or their behavior. In textbooks, these explanations are usually presented as comments in the code or as explanations on the margins. The example explorer tools allow students to examine these explanations interactively. Tutoring systems, which engage students in explaining the code, use these model explanations to check student responses and provide scaffolding. In all these cases, to make a worked example re-usable beyond its presentation in a lecture, the explanations have to be authored by instructors or domain experts i.e., produced and integrated into a specific system. As the experience of the last 10 years demonstrated, these explanations are hard to obtain. Those already collected are usually “locked” in a specific example-focused system and can’t be reused. The purpose of this working group is to support broader re-used of worked examples augmented with explanations. Our current plan is to develop а standard approach to represent explained examples. This approach will enable an example created for any of the existing systems to be explored in a standard format and imported into any other example-focused system. We plan to follow a successful experience of the PEML working group focused on re-using programming exercises.
SPLICE Working Group:Reusable Code Examples
SPLICE Working Group:Reusable Code Examples
Peter Brusilovsky
This is a project report for Tata Motors and its marketing strategies
Major project report on Tata Motors and its marketing strategies
Major project report on Tata Motors and its marketing strategies
AmanpreetKaur157993
Odoo 17 Studio App introduces enhancements to its approval flow, empowering businesses to manage approvals effectively and boost productivity. This slide dives into these improvements and highlighting their benefits.
Improved Approval Flow in Odoo 17 Studio App
Improved Approval Flow in Odoo 17 Studio App
Celine George
The Department of Emergency Medicine at Carolinas Medical Center is passionate about education! Dr. Michael Gibbs is a world-renowned clinician and educator and has helped guide numerous young clinicians on the long path of Mastery of Emergency Medical Care. With his oversight, the EMGuideWire team aim to help augment our understanding of emergent imaging. You can follow along with the EMGuideWire.com team as they post these educational, self-guided radiology slides or you can also use this section to learn more in-depth about specific conditions and diseases. This Radiology Reading Room pertains to Sternal Fractures and Dislocations and is brought to you by Carrie Bissell, MD, Aaron Fox, MD, Kendrick Lim, MD, Stephanie Jensen, MD, and Olivia Rice, MD. It is has special guest editor: Sean Dieffenbaugher, MD and Laurence Kempton, MD
Sternal Fractures & Dislocations - EMGuidewire Radiology Reading Room
Sternal Fractures & Dislocations - EMGuidewire Radiology Reading Room
Sean M. Fox
https://app.box.com/s/m9ehjx5owsaox9ykvb9qg3csa8a0jnox
TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...
TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...
Nguyen Thanh Tu Collection
https://app.box.com/s/xplac2t6bphx6pe1mofyfj0fvrjx1f3i
24 ĐỀ THAM KHẢO KÌ THI TUYỂN SINH VÀO LỚP 10 MÔN TIẾNG ANH SỞ GIÁO DỤC HẢI DƯ...
24 ĐỀ THAM KHẢO KÌ THI TUYỂN SINH VÀO LỚP 10 MÔN TIẾNG ANH SỞ GIÁO DỤC HẢI DƯ...
Nguyen Thanh Tu Collection
Odoo Knowledge is a multipurpose productivity app that allows internal users to enrich their business knowledge base and provide individually or collaboratively gathered information.
An Overview of the Odoo 17 Knowledge App
An Overview of the Odoo 17 Knowledge App
Celine George
Supporting Newcomer Multilingual Learners
Supporting Newcomer Multilingual Learners
Supporting Newcomer Multilingual Learners
David Douglas School District
For more information about my speaking and training work, visit: https://www.pookyknightsmith.com/speaking/
Trauma-Informed Leadership - Five Practical Principles
Trauma-Informed Leadership - Five Practical Principles
Pooky Knightsmith
In the world of commerce, precision is paramount. Pro-Forma Invoices serve as the blueprint for these precise financial transactions. These documents encapsulate critical information such as quantity, transportation charges, value, weight, and the range of goods involved in a transaction.
How to Send Pro Forma Invoice to Your Customers in Odoo 17
How to Send Pro Forma Invoice to Your Customers in Odoo 17
Celine George
spellinga
Spellings Wk 4 and Wk 5 for Grade 4 at CAPS
Spellings Wk 4 and Wk 5 for Grade 4 at CAPS
AnaAcapella
THPT QUOC GIA TIENG ANH
Đề tieng anh thpt 2024 danh cho cac ban hoc sinh
Đề tieng anh thpt 2024 danh cho cac ban hoc sinh
leson0603
STL algorithm SWAP MAX MAX_ELEMENT SORT COUNT COUNT_IF
Stl Algorithms in C++ jjjjjjjjjjjjjjjjjj
Stl Algorithms in C++ jjjjjjjjjjjjjjjjjj
Mohammed Sikander
This presentation covers the essential parameters of Unit 2 Operations Processes of the subject Operations & Supply Chain Management. Topics Covered: Volume Variety and Flow. Types of Processes and Operations Systems - Continuous Flow system and intermittent flow systems.Job Production, Batch Production, Assembly line and Continuous Flow, Process and Product Layout. Design of Service Systems, Service Blueprinting.
OSCM Unit 2_Operations Processes & Systems
OSCM Unit 2_Operations Processes & Systems
Sandeep D Chaudhary
Recently uploaded
(20)
Including Mental Health Support in Project Delivery, 14 May.pdf
Including Mental Health Support in Project Delivery, 14 May.pdf
AIM of Education-Teachers Training-2024.ppt
AIM of Education-Teachers Training-2024.ppt
PSYPACT- Practicing Over State Lines May 2024.pptx
PSYPACT- Practicing Over State Lines May 2024.pptx
Mattingly "AI & Prompt Design: Named Entity Recognition"
Mattingly "AI & Prompt Design: Named Entity Recognition"
When Quality Assurance Meets Innovation in Higher Education - Report launch w...
When Quality Assurance Meets Innovation in Higher Education - Report launch w...
Personalisation of Education by AI and Big Data - Lourdes Guàrdia
Personalisation of Education by AI and Big Data - Lourdes Guàrdia
SPLICE Working Group:Reusable Code Examples
SPLICE Working Group:Reusable Code Examples
Major project report on Tata Motors and its marketing strategies
Major project report on Tata Motors and its marketing strategies
Improved Approval Flow in Odoo 17 Studio App
Improved Approval Flow in Odoo 17 Studio App
Sternal Fractures & Dislocations - EMGuidewire Radiology Reading Room
Sternal Fractures & Dislocations - EMGuidewire Radiology Reading Room
TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...
TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...
24 ĐỀ THAM KHẢO KÌ THI TUYỂN SINH VÀO LỚP 10 MÔN TIẾNG ANH SỞ GIÁO DỤC HẢI DƯ...
24 ĐỀ THAM KHẢO KÌ THI TUYỂN SINH VÀO LỚP 10 MÔN TIẾNG ANH SỞ GIÁO DỤC HẢI DƯ...
An Overview of the Odoo 17 Knowledge App
An Overview of the Odoo 17 Knowledge App
Supporting Newcomer Multilingual Learners
Supporting Newcomer Multilingual Learners
Trauma-Informed Leadership - Five Practical Principles
Trauma-Informed Leadership - Five Practical Principles
How to Send Pro Forma Invoice to Your Customers in Odoo 17
How to Send Pro Forma Invoice to Your Customers in Odoo 17
Spellings Wk 4 and Wk 5 for Grade 4 at CAPS
Spellings Wk 4 and Wk 5 for Grade 4 at CAPS
Đề tieng anh thpt 2024 danh cho cac ban hoc sinh
Đề tieng anh thpt 2024 danh cho cac ban hoc sinh
Stl Algorithms in C++ jjjjjjjjjjjjjjjjjj
Stl Algorithms in C++ jjjjjjjjjjjjjjjjjj
OSCM Unit 2_Operations Processes & Systems
OSCM Unit 2_Operations Processes & Systems
a. SN1 and c. yellow to colorless .pdf
1.
a. SN1 and
c. yellow to colorless Solution a. SN1 and c. yellow to colorless
Download now