Simple logic... The reason is the radical interme.pdf
•
0 likes•2 views
Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene. Solution Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene..
Report
Share
Report
Share
Download to read offline
Recommended
While a majority of the worlds current electricity supply is gener.pdf
While a majority of the world\'s current electricity supply is generated from fossil fuels such as
coal, oil and natural gas, these traditional energy sources face a number of challenges including
rising prices, security concerns over dependence on imports from a limited number of countries
which have significant fossil fuel supplies, and growing environmental concerns over the climate
change risks associated with power generation using fossil fuels. As a result of these and other
challenges facing traditional energy sources, governments, businesses and consumers are
increasingly supporting the development of alternative energy sources and new technologies for
electricity generation. Renewable energy sources such as solar, biomass, geothermal,
hydroelectric and windpower generation have emerged as potential alternatives which address
some of these concerns. As opposed to fossil fuels, which draw on finite resources that may
eventually become too expensive to retrieve, renewable energy sources are generally unlimited
in availability.
Solar power generation has emerged as one of the most rapidly growing renewable sources of
electricity. Solar power generation has several advantages over other forms of electricity
generation:
Reduced Dependence on Fossil Fuels. Solar energy production does not require fossil fuels and
is therefore less dependent on this limited and expensive natural resource. Although there is
variability in the amount and timing of sunlight over the day, season and year, a properly sized
and configured system can be designed to be highly reliable while providing long-term, fixed
price electricity supply.
Environmental Advantages. Solar power production generates electricity with a limited impact
on the environment as compared to other forms of electricity production.
Matching Peak Time Output with Peak Time Demand. Solar energy can effectively supplement
electricity supply from an electricity transmission grid, such as when electricity demand peaks in
the summer
Modularity and Scalability. As the size and generating capacity of a solar system are a function
of the number of solar modules installed, applications of solar technology are readily scalable
and versatile.
Flexible Locations. Solar power production facilities can be installed at the customer site
which reduces required investments in production and transportation infrastructure.
Government Incentives. A growing number of countries have established incentive programs
for the development of solar and other renewable energy sources, such as (i) net metering laws
that allow on-grid end users to sell electricity back to the grid at retail prices, (ii) direct subsidies
to end users to offset costs of photovoltaic equipment and installation charges, (iii) low interest
loans for financing solar power systems and tax incentives; and (iv) government standards that
mandate minimum usage levels of renewable energy sources.
Despite the cost, an advantage of photovoltaic systems is.
What is broadbandWhat is the potential for broadband wireless syste.pdf
What is broadband?What is the potential for broadband wireless systems?Do you think it will
ever really catch on here in the US?
sol:
Broadband is a transmission technique with high capcaticy using wide range of frequency for
data transmission
and communication.it has an capability of sending multiple singnals through different medium
like optical fiber,coaxial fiber.
potential for broadband wireless systems:
1)wireless broadband network has potencial of data rates which is equal to wired networks
2)it supports both symmetric (it means same data rates in both the direction)and asymmetric
3)it has also capable of sending high data rates and communicate with satellite systems
4)it has a wide range of signal strength upto 50 km
Do you think it will ever really catch on here in the US?:
no it will catch on here in the us also because as the techology increases the needs also increases
so broadband will play a major role in day today life.according to us analysis the wireless
broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the
population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was
28.0% in the world.
so the above analysis is one of the proof for developing of wireless Broadband in us
Solution
What is broadband?What is the potential for broadband wireless systems?Do you think it will
ever really catch on here in the US?
sol:
Broadband is a transmission technique with high capcaticy using wide range of frequency for
data transmission
and communication.it has an capability of sending multiple singnals through different medium
like optical fiber,coaxial fiber.
potential for broadband wireless systems:
1)wireless broadband network has potencial of data rates which is equal to wired networks
2)it supports both symmetric (it means same data rates in both the direction)and asymmetric
3)it has also capable of sending high data rates and communicate with satellite systems
4)it has a wide range of signal strength upto 50 km
Do you think it will ever really catch on here in the US?:
no it will catch on here in the us also because as the techology increases the needs also increases
so broadband will play a major role in day today life.according to us analysis the wireless
broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the
population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was
28.0% in the world.
so the above analysis is one of the proof for developing of wireless Broadband in us.
WaterSolutionWater.pdf
This very short document contains only one word repeated three times - "Water". It does not provide much context or information to summarize in 3 sentences or less. The document seems to focus on the subject of water but does not elaborate on any key details, topics, or ideas about water that could be condensed into a multi-sentence summary.
Thousands of repeating units called nephrons will form a kidney and .pdf
Thousands of repeating units called nephrons will form a kidney and these organs are useful in
extracting the waste from blood and provides a balance in body fluids and same basic design of
kidneys will be found in all vertebrate kidneys.
It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle
the problem of living in water as their body fluid is of high osmotic concentration. These kidneys
helped them to prevent water from outside to inside and to prevent the solutes leaving the body.
The nephrons in these animals use to absorb the ions across the nephron tubules.
The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of
tubules which was restricted to the trunk region of their body and each tubule was found to be
opened medially into the mesomeral coelom and these will be joined the hypomeral coelom
using a short canal. Later on these tubules curved posteriorly so that they can be united into a
common duct called archinephric duct and it has opened in cloaca.
The bulging of spherical cluster of capillaries in the nephrocoel of each segment was seen, in
later stages the glomerulus, nephrocoel and tubule will joined together to from a functional unit
known as archinephron-this is known as primitive vertebrate kidney.
During the course of evolution the nephrocoel lost its connect with that of hypomeral coelom and
slowly it became specialized as Bowman\'s capsule and like this bowman’s capsule was able to
form a union between glomerulus and renal tubule-it formed a functional unit called nephron.
Malpighian body was formed by the combination of glomerulus and Bowman\'s capsule and in
vertebrates the excretory organs are derived from mesoderm and vertebrates got unique
adaptation by having glomerulus which is water permeable capillaries and its suitability for free
water clearance gave them extra advantage for vertebrates for the evolution radiation in the
physiologically fresh water hostile environment.
Solution
Thousands of repeating units called nephrons will form a kidney and these organs are useful in
extracting the waste from blood and provides a balance in body fluids and same basic design of
kidneys will be found in all vertebrate kidneys.
It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle
the problem of living in water as their body fluid is of high osmotic concentration. These kidneys
helped them to prevent water from outside to inside and to prevent the solutes leaving the body.
The nephrons in these animals use to absorb the ions across the nephron tubules.
The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of
tubules which was restricted to the trunk region of their body and each tubule was found to be
opened medially into the mesomeral coelom and these will be joined the hypomeral coelom
using a short canal. Later on these tubules curved posteriorly so tha.
To understand the complexicities of the issue at hand we must first .pdf
To understand the complexicities of the issue at hand we must first look at what cause inland
seas. According to the geographic descrptions,it was more than likely a result of tectonic plates
shifting during the developement of our current landmass positions. When they shift,the land can
either sinkor have its ocean basins fill with water from flooding.This is called
Transgression.Either case causes a developement of a salty body of water with aquatic animals
trapped inside.Being that is surrounded by a desert-like biome,itis more likely to be the result of
the tectonic plates spreading, causing the land to sink and fill in with salt water.As this occurs,
prey animals will thrive through a lack of predators, such as smaller fish.This enables the fishing
industry to boom as it did. The fishing trade in this area is at risk of falling.when humans alter
systems such as this one,their stabilty declines.For a while this was more than likely a self-
sustaining environment.The implementation of irrigation systemshave first,affected the wildlife
surrounding the inland sea, which was assisting its survival. Every animal plays a role in the
ecosystem.When the industries were built around the body of water, the land ecosystem
suffered.As a result, the fish in the corresponding water will eventually suffer.Being a self-
sustaining system, it will keep water cycling by itself. When the system was built for local
farmers, water supplies were being pulled from the natural made sea and into other locations. this
is normally fine for areas,but in one such as this,without any natural made filtering system, it will
begin losing water. the process will takea while due to the water cycle consistently adding some
back,but will occur. As the water levels decrease,so will the fish.This is the cause of research
number two. With an increasing salinity count,the pHof the water and soil will change as well.
Adding salt to the soil as it is doing through wind patterns, slowly crops, which once thrived in
the surrounding land,will begin todeplete.Not all plants require the same nutrient levels..If the
farmer \'s crops are thriving now, with lower salinity counts and lower pH\'s then the same crops
will not grow as well in higher salt concentrations and higher pH\'values .Another factor
affecting local farmers as well as the fishermen is the pesticides and chemicals.These will not
only affect the water\'s pH ,it will also affect the stability of the water for the fish to live in.As
more chemicals and sewage are added to a body of water , the fish have no choice but to take in
those hazardous wastes. At first, humans will grow sick of ill- prepared fish. Second,the fish will
slowly begin to die off causing the fishermen to lose a source of income. The future of this
environment is devasting. Local animals , which do use the sea as a source of food ,will
inadvertently be affected as well . While these animals may be capable of migrating , they cannot
move far into a desert w.
The P is the present value of the cash flow streamP = 100 (1+10.pdf
The P is the present value of the cash flow stream
P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3
= 207.36
Solution
The P is the present value of the cash flow stream
P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3
= 207.36.
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and
RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure
which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the
glycosidic linkage with the N 1 of the nitrogenous base.
14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the
diphosphopyridine molecules, which having significant function in the cell.
Functions of Mono nucleotides:
Other functions used in molecular research studies like :
Solution
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and
RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure
which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the
glycosidic linkage with the N 1 of the nitrogenous base.
14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the
diphosphopyridine molecules, which having significant function in the cell.
Functions of Mono nucleotides:
Other functions used in molecular research studies like :.
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
Ques-1: Prenatal diagnosis has both positive and potentially negative consequences. While it is
most often used to detect serious problems with the fetus, the technology can also be used
potentially to select embryos based on sex, appearance, Where do you think we should draw the
line in allowing parents to use prenatal diagnosis
Answer:
Genetic testing is performed for prenatal diagnosis to know any chromosomal or genetical -
inherited abnormalities of implanted human embryo. It has positive consequence, as some
couples would like to avoid getting a baby with genetic abnormalities. However, there are
negative consequences such as various \"ethical and moral issues of prenatal diagnosis as
explained below. Therefore, it is crucial to draw a line when conducting prenatal diagnosis
finally a couple musty get legal permissions to undergo prenatal diagnosis.
Screening tests for genetic issues can be performed in the first trimester, second trimester or both
trimesters. Carrier testing is also an option performed prior to or during pregnancy. Carrier
testing provides information as to whether one or both parents are carriers for certain inherited
disorders. The results of these tests are used to determine an appropriate plan of care for the
patient. Genetic testing of the fetus and the parents offers both opportunities and ethical
challenges. As a Registered Nurse, you need to be aware of your own feelings in order to provide
non-biased professional support.
Implications of genetic testing:
Genetic testing is the pre-implantation technology is now currently using in detecting and
screening embryo in order to assess whether the resultant embryos from fertilization are normal
or abnormal genotypically. A registered nurse must advice & support to a couple seeking
guidance about the genetic testing because genetic screening has various ethical and moral
aspects. The major rising ethical challenge is the connection between the pre-selection of
embryos based on meticulous genetic analysis followed by rising discrimination of disabled
people. This ethical problem is associated with selection of future children based on their low
levels of disabilities and abnormalities.
Ethical challenges with preimplantation of genetic testing or diagnosis (PGD):
1. PGD allows embryo selection after pregnancy or even before initiation of pregnancy.
However, this procedure is very controversial and faces a variety of moral ethics that are
completely relies upon moral status of embryo and prenatal diagnosis in selecting progeny
without the use of abortion (medical issue).
2. The major rising ethical challenge is the connection between the pre-selection of embryos
based on meticulous genetic analysis followed by rising discrimination of disabled people, a
psychological moral issue. This ethical problem is associated with selection of future children
based on their low levels of disabilities and abnormalities. A clinic should have license primarily
to perform preimplantatio.
Recommended
While a majority of the worlds current electricity supply is gener.pdf
While a majority of the world\'s current electricity supply is generated from fossil fuels such as
coal, oil and natural gas, these traditional energy sources face a number of challenges including
rising prices, security concerns over dependence on imports from a limited number of countries
which have significant fossil fuel supplies, and growing environmental concerns over the climate
change risks associated with power generation using fossil fuels. As a result of these and other
challenges facing traditional energy sources, governments, businesses and consumers are
increasingly supporting the development of alternative energy sources and new technologies for
electricity generation. Renewable energy sources such as solar, biomass, geothermal,
hydroelectric and windpower generation have emerged as potential alternatives which address
some of these concerns. As opposed to fossil fuels, which draw on finite resources that may
eventually become too expensive to retrieve, renewable energy sources are generally unlimited
in availability.
Solar power generation has emerged as one of the most rapidly growing renewable sources of
electricity. Solar power generation has several advantages over other forms of electricity
generation:
Reduced Dependence on Fossil Fuels. Solar energy production does not require fossil fuels and
is therefore less dependent on this limited and expensive natural resource. Although there is
variability in the amount and timing of sunlight over the day, season and year, a properly sized
and configured system can be designed to be highly reliable while providing long-term, fixed
price electricity supply.
Environmental Advantages. Solar power production generates electricity with a limited impact
on the environment as compared to other forms of electricity production.
Matching Peak Time Output with Peak Time Demand. Solar energy can effectively supplement
electricity supply from an electricity transmission grid, such as when electricity demand peaks in
the summer
Modularity and Scalability. As the size and generating capacity of a solar system are a function
of the number of solar modules installed, applications of solar technology are readily scalable
and versatile.
Flexible Locations. Solar power production facilities can be installed at the customer site
which reduces required investments in production and transportation infrastructure.
Government Incentives. A growing number of countries have established incentive programs
for the development of solar and other renewable energy sources, such as (i) net metering laws
that allow on-grid end users to sell electricity back to the grid at retail prices, (ii) direct subsidies
to end users to offset costs of photovoltaic equipment and installation charges, (iii) low interest
loans for financing solar power systems and tax incentives; and (iv) government standards that
mandate minimum usage levels of renewable energy sources.
Despite the cost, an advantage of photovoltaic systems is.
What is broadbandWhat is the potential for broadband wireless syste.pdf
What is broadband?What is the potential for broadband wireless systems?Do you think it will
ever really catch on here in the US?
sol:
Broadband is a transmission technique with high capcaticy using wide range of frequency for
data transmission
and communication.it has an capability of sending multiple singnals through different medium
like optical fiber,coaxial fiber.
potential for broadband wireless systems:
1)wireless broadband network has potencial of data rates which is equal to wired networks
2)it supports both symmetric (it means same data rates in both the direction)and asymmetric
3)it has also capable of sending high data rates and communicate with satellite systems
4)it has a wide range of signal strength upto 50 km
Do you think it will ever really catch on here in the US?:
no it will catch on here in the us also because as the techology increases the needs also increases
so broadband will play a major role in day today life.according to us analysis the wireless
broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the
population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was
28.0% in the world.
so the above analysis is one of the proof for developing of wireless Broadband in us
Solution
What is broadband?What is the potential for broadband wireless systems?Do you think it will
ever really catch on here in the US?
sol:
Broadband is a transmission technique with high capcaticy using wide range of frequency for
data transmission
and communication.it has an capability of sending multiple singnals through different medium
like optical fiber,coaxial fiber.
potential for broadband wireless systems:
1)wireless broadband network has potencial of data rates which is equal to wired networks
2)it supports both symmetric (it means same data rates in both the direction)and asymmetric
3)it has also capable of sending high data rates and communicate with satellite systems
4)it has a wide range of signal strength upto 50 km
Do you think it will ever really catch on here in the US?:
no it will catch on here in the us also because as the techology increases the needs also increases
so broadband will play a major role in day today life.according to us analysis the wireless
broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the
population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was
28.0% in the world.
so the above analysis is one of the proof for developing of wireless Broadband in us.
WaterSolutionWater.pdf
This very short document contains only one word repeated three times - "Water". It does not provide much context or information to summarize in 3 sentences or less. The document seems to focus on the subject of water but does not elaborate on any key details, topics, or ideas about water that could be condensed into a multi-sentence summary.
Thousands of repeating units called nephrons will form a kidney and .pdf
Thousands of repeating units called nephrons will form a kidney and these organs are useful in
extracting the waste from blood and provides a balance in body fluids and same basic design of
kidneys will be found in all vertebrate kidneys.
It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle
the problem of living in water as their body fluid is of high osmotic concentration. These kidneys
helped them to prevent water from outside to inside and to prevent the solutes leaving the body.
The nephrons in these animals use to absorb the ions across the nephron tubules.
The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of
tubules which was restricted to the trunk region of their body and each tubule was found to be
opened medially into the mesomeral coelom and these will be joined the hypomeral coelom
using a short canal. Later on these tubules curved posteriorly so that they can be united into a
common duct called archinephric duct and it has opened in cloaca.
The bulging of spherical cluster of capillaries in the nephrocoel of each segment was seen, in
later stages the glomerulus, nephrocoel and tubule will joined together to from a functional unit
known as archinephron-this is known as primitive vertebrate kidney.
During the course of evolution the nephrocoel lost its connect with that of hypomeral coelom and
slowly it became specialized as Bowman\'s capsule and like this bowman’s capsule was able to
form a union between glomerulus and renal tubule-it formed a functional unit called nephron.
Malpighian body was formed by the combination of glomerulus and Bowman\'s capsule and in
vertebrates the excretory organs are derived from mesoderm and vertebrates got unique
adaptation by having glomerulus which is water permeable capillaries and its suitability for free
water clearance gave them extra advantage for vertebrates for the evolution radiation in the
physiologically fresh water hostile environment.
Solution
Thousands of repeating units called nephrons will form a kidney and these organs are useful in
extracting the waste from blood and provides a balance in body fluids and same basic design of
kidneys will be found in all vertebrate kidneys.
It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle
the problem of living in water as their body fluid is of high osmotic concentration. These kidneys
helped them to prevent water from outside to inside and to prevent the solutes leaving the body.
The nephrons in these animals use to absorb the ions across the nephron tubules.
The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of
tubules which was restricted to the trunk region of their body and each tubule was found to be
opened medially into the mesomeral coelom and these will be joined the hypomeral coelom
using a short canal. Later on these tubules curved posteriorly so tha.
To understand the complexicities of the issue at hand we must first .pdf
To understand the complexicities of the issue at hand we must first look at what cause inland
seas. According to the geographic descrptions,it was more than likely a result of tectonic plates
shifting during the developement of our current landmass positions. When they shift,the land can
either sinkor have its ocean basins fill with water from flooding.This is called
Transgression.Either case causes a developement of a salty body of water with aquatic animals
trapped inside.Being that is surrounded by a desert-like biome,itis more likely to be the result of
the tectonic plates spreading, causing the land to sink and fill in with salt water.As this occurs,
prey animals will thrive through a lack of predators, such as smaller fish.This enables the fishing
industry to boom as it did. The fishing trade in this area is at risk of falling.when humans alter
systems such as this one,their stabilty declines.For a while this was more than likely a self-
sustaining environment.The implementation of irrigation systemshave first,affected the wildlife
surrounding the inland sea, which was assisting its survival. Every animal plays a role in the
ecosystem.When the industries were built around the body of water, the land ecosystem
suffered.As a result, the fish in the corresponding water will eventually suffer.Being a self-
sustaining system, it will keep water cycling by itself. When the system was built for local
farmers, water supplies were being pulled from the natural made sea and into other locations. this
is normally fine for areas,but in one such as this,without any natural made filtering system, it will
begin losing water. the process will takea while due to the water cycle consistently adding some
back,but will occur. As the water levels decrease,so will the fish.This is the cause of research
number two. With an increasing salinity count,the pHof the water and soil will change as well.
Adding salt to the soil as it is doing through wind patterns, slowly crops, which once thrived in
the surrounding land,will begin todeplete.Not all plants require the same nutrient levels..If the
farmer \'s crops are thriving now, with lower salinity counts and lower pH\'s then the same crops
will not grow as well in higher salt concentrations and higher pH\'values .Another factor
affecting local farmers as well as the fishermen is the pesticides and chemicals.These will not
only affect the water\'s pH ,it will also affect the stability of the water for the fish to live in.As
more chemicals and sewage are added to a body of water , the fish have no choice but to take in
those hazardous wastes. At first, humans will grow sick of ill- prepared fish. Second,the fish will
slowly begin to die off causing the fishermen to lose a source of income. The future of this
environment is devasting. Local animals , which do use the sea as a source of food ,will
inadvertently be affected as well . While these animals may be capable of migrating , they cannot
move far into a desert w.
The P is the present value of the cash flow streamP = 100 (1+10.pdf
The P is the present value of the cash flow stream
P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3
= 207.36
Solution
The P is the present value of the cash flow stream
P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3
= 207.36.
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and
RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure
which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the
glycosidic linkage with the N 1 of the nitrogenous base.
14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the
diphosphopyridine molecules, which having significant function in the cell.
Functions of Mono nucleotides:
Other functions used in molecular research studies like :
Solution
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and
RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure
which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the
glycosidic linkage with the N 1 of the nitrogenous base.
14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the
diphosphopyridine molecules, which having significant function in the cell.
Functions of Mono nucleotides:
Other functions used in molecular research studies like :.
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
Ques-1: Prenatal diagnosis has both positive and potentially negative consequences. While it is
most often used to detect serious problems with the fetus, the technology can also be used
potentially to select embryos based on sex, appearance, Where do you think we should draw the
line in allowing parents to use prenatal diagnosis
Answer:
Genetic testing is performed for prenatal diagnosis to know any chromosomal or genetical -
inherited abnormalities of implanted human embryo. It has positive consequence, as some
couples would like to avoid getting a baby with genetic abnormalities. However, there are
negative consequences such as various \"ethical and moral issues of prenatal diagnosis as
explained below. Therefore, it is crucial to draw a line when conducting prenatal diagnosis
finally a couple musty get legal permissions to undergo prenatal diagnosis.
Screening tests for genetic issues can be performed in the first trimester, second trimester or both
trimesters. Carrier testing is also an option performed prior to or during pregnancy. Carrier
testing provides information as to whether one or both parents are carriers for certain inherited
disorders. The results of these tests are used to determine an appropriate plan of care for the
patient. Genetic testing of the fetus and the parents offers both opportunities and ethical
challenges. As a Registered Nurse, you need to be aware of your own feelings in order to provide
non-biased professional support.
Implications of genetic testing:
Genetic testing is the pre-implantation technology is now currently using in detecting and
screening embryo in order to assess whether the resultant embryos from fertilization are normal
or abnormal genotypically. A registered nurse must advice & support to a couple seeking
guidance about the genetic testing because genetic screening has various ethical and moral
aspects. The major rising ethical challenge is the connection between the pre-selection of
embryos based on meticulous genetic analysis followed by rising discrimination of disabled
people. This ethical problem is associated with selection of future children based on their low
levels of disabilities and abnormalities.
Ethical challenges with preimplantation of genetic testing or diagnosis (PGD):
1. PGD allows embryo selection after pregnancy or even before initiation of pregnancy.
However, this procedure is very controversial and faces a variety of moral ethics that are
completely relies upon moral status of embryo and prenatal diagnosis in selecting progeny
without the use of abortion (medical issue).
2. The major rising ethical challenge is the connection between the pre-selection of embryos
based on meticulous genetic analysis followed by rising discrimination of disabled people, a
psychological moral issue. This ethical problem is associated with selection of future children
based on their low levels of disabilities and abnormalities. A clinic should have license primarily
to perform preimplantatio.
QuestionWhat are the elements of safe drinking water act What ar.pdf
Question:
What are the elements of safe drinking water act? What are the aspect & provision for safe
drinking water act?
Solution
:
This act was passed in 2002. The main elements imposes in the act are providing the permissible
limit of contaminants in drinking water i.e. drinking water standard, establishes the rule for
operators of facilities, for drinking water systems, for laboratories that dealt with the drinking
water parameter testing, training & certification to operators & there are many other elements
that require for safe drinking purpose.
Its main aspect is to ensure the safety of consumers by drinking the potable water (the water
contain the contaminants up to prescribed limit given in the act. By consuming the potable water,
the diseases associated due to drinking of polluted water are minimized.
There are three parameters are described in the act. These are physical parameters, chemical
parameters, & biological parameters. Physical parameter includes suspended solid, turbidity,
dissolved solid, pH, hardness, acidity, alkanity etc. The chemical parameters include BOD,
COD, ThOD, DO, etc. The biological parameter includes E.coli, B.Coli bacteria, pathogenic
bacteria, disease causing bacteria. Amongst, three bacteria, it’s the biological parameters which
are very objectionable. The upper limit of this parameters are prescribed in the act upto which
the water are drinkable.
Note: All pollutant water are contaminants but its not necessary that all contaminant are
pollutant..
Programimport java.util.; import java.io.; class FoodTruck.pdf
Program:
import java.util.*;
import java.io.*;
class FoodTruck
{
String truckName;
double fuelintruck;
int numberofemplyees;
String menuItems[]=new String[5];
public void getData()
{
Scanner s=new Scanner(System.in);
System.out.print(\"Enter TruckName\");
truckName=s.next();
System.out.print(\"Enter Fuel in Tank \");
fuelintruck=s.nextDouble();
System.out.print(\"Enter number of employess in truck\");
numberofemplyees=s.nextInt();
System.out.print(\"Enter Menu Items\");
for(int i=0;i<5;i++)
menuItems[i]=s.next();
}
public void ckeckfuel()
{
if(fuelintruck<2.5)
System.out.println(\"Please refill your truck\");
else
System.out.println(\"Fuel is enough\");
}
public void displayMenu()
{
try
{
FileOutputStream fout=new FileOutputStream(\"Menu.txt\");
for(int i=0;i<5;i++)
{
byte b[]=menuItems[i].getBytes();
fout.write(b);
System.out.println(menuItems[i]);
}
}
catch(IOException e)
{
System.out.println(e.getMessage());
}
}
}
public class MyTruck1
{
public static void main(String ar[])
{
FoodTruck ft=new FoodTruck();
ft.getData();
ft.ckeckfuel();
ft.displayMenu();
}
}
Output:
Enter TruckNameFoodpanda
Enter Fuel in Tank 25.4
Enter number of employess in truck5
Enter Menu Itemssabji dal papad noodels paneer
Fuel is enough
sabji
dal
papad
noodels
paneer
Solution
Program:
import java.util.*;
import java.io.*;
class FoodTruck
{
String truckName;
double fuelintruck;
int numberofemplyees;
String menuItems[]=new String[5];
public void getData()
{
Scanner s=new Scanner(System.in);
System.out.print(\"Enter TruckName\");
truckName=s.next();
System.out.print(\"Enter Fuel in Tank \");
fuelintruck=s.nextDouble();
System.out.print(\"Enter number of employess in truck\");
numberofemplyees=s.nextInt();
System.out.print(\"Enter Menu Items\");
for(int i=0;i<5;i++)
menuItems[i]=s.next();
}
public void ckeckfuel()
{
if(fuelintruck<2.5)
System.out.println(\"Please refill your truck\");
else
System.out.println(\"Fuel is enough\");
}
public void displayMenu()
{
try
{
FileOutputStream fout=new FileOutputStream(\"Menu.txt\");
for(int i=0;i<5;i++)
{
byte b[]=menuItems[i].getBytes();
fout.write(b);
System.out.println(menuItems[i]);
}
}
catch(IOException e)
{
System.out.println(e.getMessage());
}
}
}
public class MyTruck1
{
public static void main(String ar[])
{
FoodTruck ft=new FoodTruck();
ft.getData();
ft.ckeckfuel();
ft.displayMenu();
}
}
Output:
Enter TruckNameFoodpanda
Enter Fuel in Tank 25.4
Enter number of employess in truck5
Enter Menu Itemssabji dal papad noodels paneer
Fuel is enough
sabji
dal
papad
noodels
paneer.
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description :
Active Directory :
In general the Active Directory is abbrevated as AD and is a directory service that Microsoft
developed for Windows domain networks. It is included in most of the available Windows
Server operating systems as a set of processes and services.
Considerations for designing a Active Directory :
Before moving on directly to the planning ang implementation of the Active Directory we just
need to get some major factors and their considerations into account so as to handle them
perfectly. When we are designing the Active Directory network, it is important to use the four
divisions (forests, domains, organizational units, and sites) to their maximum potential. Some of
the important factors/considerations are described below :
a) Active Directory elements :
When designing an Active Directory, we need to be completely clear of what each element or
part actually means and how it fits into the overall design.
b) Active Directory forest :
In general, the forest, in terms of Active Directory, basically means every domain, organizational
unit, and any other object stored within its database. The forest is the absolute top level of the
Active Directory infrastructure. We can have more than one forest in a company, which actually
represent the high level security boundaries, and can therefore improve security between
different business units or companies belonging to a single organization. The point behind the
forest is that we have all our domains and domain tree within the organization itself contained
within it. It is designed so that we can have a transitive links between all of the trees within one
forest.
c) Active Directory tree :
A tree with reference to the Active Directory basically refers to a domain and all of its objects
that merge into a single DNS name.
d) Organizational Units and the Leaf Objects :
In an Active Directory, Organizational Units abbrevated as OUs, which are also called as the
Containers, and the Leaf Objects, which are of non-containing objects such as computer accounts
and user accounts, are directly related. We can access the OUs and other objects through the
Microsoft Management Console (MMC) or through the Users and Computers tool in the
Administrative Tools.
e) Active Directory Sites :
The Sites and Services of the MMC is a utility that a lot of Windows administrators, particularly
in smaller organizations, completely overlook. This part of Active Directory, however, is one of
the most crucial parts to understand and implement correctly. These Sites give us a very unique
and well-designed approach to separate specific locations within the Active Directory. As the
principle of an Active Directory domain is global-meaning that it is meant to be the same
anywhere-it could present a problem for users who move from office to office, or for offices with
network connections that are slow. Active Directory sites allow one to specify the IP address
spaces or subnets used with.
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures;
public class HelloWorld >
{
public HelloWorld( )
{
root = null;
}
public void insert( AnyType x )
{
root = insert( x, root );
}
public void remove( AnyType x )
{
root = remove( x, root );
}
public AnyType findMin( )
{
if( isEmpty( ) )
System.out.println(\"tree is empty\");
return findMin( root ).element;
}
public AnyType findMax( )
{
if( isEmpty( ) )
System.out.println(\"tree is empty\");
return findMax( root ).element;
}
public boolean contains( AnyType x )
{
return contains( x, root );
}
public void makeEmpty( )
{
root = null;
}
public boolean isEmpty( )
{
return root == null;
}
public void printTree( )
{
if( isEmpty( ) )
System.out.println( \"Empty tree\" );
else
printTree( root );
}
private BinaryNode insert( AnyType x, BinaryNode t )
{
if( t == null )
return new BinaryNode( x, null, null );
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
t.left = insert( x, t.left );
else if( compareResult > 0 )
t.right = insert( x, t.right );
else
; // Duplicate; do nothing
return t;
}
private BinaryNode remove( AnyType x, BinaryNode t )
{
if( t == null )
return t; // Item not found; do nothing
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
t.left = remove( x, t.left );
else if( compareResult > 0 )
t.right = remove( x, t.right );
else if( t.left != null && t.right != null ) // Two children
{
t.element = findMin( t.right ).element;
t.right = remove( t.element, t.right );
}
else
t = ( t.left != null ) ? t.left : t.right;
return t;
}
private BinaryNode findMin( BinaryNode t )
{
if( t == null )
return null;
else if( t.left == null )
return t;
return findMin( t.left );
}
private BinaryNode findMax( BinaryNode t )
{
if( t != null )
while( t.right != null )
t = t.right;
return t;
}
private boolean contains( AnyType x, BinaryNode t )
{
if( t == null )
return false;
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
return contains( x, t.left );
else if( compareResult > 0 )
return contains( x, t.right );
else
return true; // Match
}
private void printTree( BinaryNode t )
{
if( t != null )
{
printTree( t.left );
System.out.println( t.element );
printTree( t.right );
}
}
private int height( BinaryNode t )
{
if( t == null )
return -1;
else
return 1 + Math.max( height( t.left ), height( t.right ) );
}
// Basic node stored in unbalanced binary search trees
private static class BinaryNode
{
// Constructors
BinaryNode( AnyType theElement )
{
this( theElement, null, null );
}
BinaryNode( AnyType theElement, BinaryNode lt, BinaryNode rt )
{
element = theElement;
left = lt;
right = rt;
}
AnyType element; // The data in the node
BinaryNode left; // Left child
BinaryNode right; // Right child
}
/** The tree root. */
private BinaryNode root;
public static void main( String [ ] args )
{
HelloWorld t = new HelloWorld( );
final int NUMS = 4000;
final int GAP = 37;
System.out.println( \"Checking... (no more output means success)\" );
for( int i = GAP; i != 0; i = ( i + GAP ) % NUMS )
t.insert.
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot work
Solution
it always attacks oxygen.the image doesnot work.
import java.util.Scanner;public class Fraction { instan.pdf
The document defines a Fraction class with methods to represent fractions, multiply fractions, and reduce fractions to their lowest terms. It includes constructors to initialize fractions to default or custom values, getter and setter methods, and a main method that demonstrates creating and manipulating Fraction objects.
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,
Please find the Ansswer below.
//PLAYLIST.h
#include
#include
#include
#include
using namespace std;
class Playlist
{
private:
string uniqueID;
string songName;
string artistName;
int songLength;
public:
Playlist() { uniqueID = \"\", songName = \"\", artistName = \"\", songLength = 0; };
Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength);
void InsertAfter();
void SetNext();
string GetID();
string GetSongName();
string GetArtistName();
int GetSongLength();
string GetNext();
void PrintPlaylistNode();
};
//PLAYLIST.CPP
#include \"Playlist.h\"
Playlist::Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength)
{
uniqueID = auniqueId;
songName = asongName;
artistName = aArtistName;
songLength = aSongLength;
}
string Playlist::GetArtistName()
{
return artistName;
}
string Playlist::GetID()
{
return uniqueID;
}
string Playlist::GetSongName()
{
return songName;
}
int Playlist::GetSongLength()
{
return songLength;
}
void Playlist::SetNext()
{
}
string Playlist::GetNext()
{
return \"\";
}
void Playlist::InsertAfter() {
}
void Playlist::PrintPlaylistNode()
{
cout << \"Unique ID:\" << uniqueID << endl ;
cout << \"Song Name:\" << songName << endl;
cout << \"Artist Name:\" << artistName << endl;
cout << \"Song Length (in seconds):\" << songLength << endl;
}
//PLAYSLITSNODE.h
#pragma once
#include \"Playlist.h\"
#include
class PlaylistNode
{
private:
std::list library;
Playlist get(list _list, int _i);
void PrintPlaylist(Playlist aPlayList);
public:
void Addsong(Playlist aPlayslist);
void Removesong(string aUnwiid);
void Changeposition(int oldPostion, int anewPostion);
void PrintSongByartist(string aAstist);
void PrintSongtotalLen();
void PrintFullPlayList();
};
//PLAYLIST.CPP
#include \"PlaylistNode.h\"
void PlaylistNode::Addsong(Playlist aPlaylist)
{
library.push_back(aPlaylist);
}
void PlaylistNode::Removesong(string aUnwiid)
{
if (library.size > 0)
{
for (it = library.begin(); it != library.end(); ++it)
{
if (it->GetID() == aUnwiid)
{
cout << it->GetSongName() << endl;
library.remove(*it);
break;
}
}
}
}
Playlist PlaylistNode::get(list _list, int _i) {
list::iterator it = _list.begin();
for (int i = 0; i<_i; i++) {
++it;
}
return *it;
}
std::list::iterator it;
void PlaylistNode::PrintFullPlayList()
{
for (it = library.begin(); it != library.end(); ++it)
{
PrintPlaylist(*it);
}
}
void PlaylistNode::PrintSongByartist(string aartiename)
{
for (it = library.begin(); it != library.end(); ++it)
{
if(it->GetArtistName() == aartiename)
PrintPlaylist(*it);
}
}
void PlaylistNode::PrintSongtotalLen()
{
int TotalSonglengst = 0;
for (it = library.begin(); it != library.end(); ++it)
{
TotalSonglengst += it->GetSongLength();
}
cout << \"Total songs Length (in seconds):\" << TotalSonglengst << endl;
}
void PlaylistNode::PrintPlaylist(Playlist aPlayList)
{
cout << \"Unique ID:\" << aPlayList.GetID() << endl;
cout << \"Song Name:\" << aPlayList.GetSongName() << endl;
cout << \"Artist Name:\" << aPlayList.GetArtis.
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution: A family can be defined as group of two or more people living in
a household and connected to each other by blood or adoption or marriage. Family as social
constitution serves to create and maintain the family life in correct ways which are considered
good by a society. It is not an objective institution as it serves to give shape to feeling and
emotions of family memberns in fundamental ways.
Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its
members. These small families are supported by increasingly reducing sized homes and are
easier to relocate. Further, small sized nuclear families can support the expensive education,
medication and other services to their children in a much better way as compared to the large
sized joint families.
Existence and characteristics of family structures: Some of the common family structures with
their characteristic features are as follows:
1: Nuclear family: The family with two generations i.e. parents and their children
2: Extended family: The family with three generations i.e. grandparents, parents and their
children constitutes an extended family.
3: Single parent family: The family in which one parent and children are residing in same
household is called as single parent family.
4: Reconstituted family: The family in which either or both of the parents have children from
their previous marriage living together are called as reconstituted family.
Characters of a family: A family is established by mating relation between man and woman
through marriage institution. Marriage is foundation of family irrespetive of mating relationship
without marriage. A family always resides in a common household wherein each family member
has his own name. Hence, marriage, common household, nomenclature of family members,
mode of interaction and communication and an economic provision are some of the
characteristics of a family.
Solution
Family as a Social Institution: A family can be defined as group of two or more people living in
a household and connected to each other by blood or adoption or marriage. Family as social
constitution serves to create and maintain the family life in correct ways which are considered
good by a society. It is not an objective institution as it serves to give shape to feeling and
emotions of family memberns in fundamental ways.
Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its
members. These small families are supported by increasingly reducing sized homes and are
easier to relocate. Further, small sized nuclear families can support the expensive education,
medication and other services to their children in a much better way as compared to the large
sized joint families.
Existence and characteristics of family structures: Some of the common family structures with
their characteristic features are as follows:
1: Nuclear family: The family with two generations i.e. parents and t.
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Internet is carried out by
working groups chartered by the IETF. Answers A, B, and C are incorrect.
Solution
D. The actual development of new standards and protocols for the Internet is carried out by
working groups chartered by the IETF. Answers A, B, and C are incorrect..
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other variables The dependent
variable responds to the independent variable. It is called dependent because it \"depends\" on
the independent variable. So Answer Is D
Solution
Dependent Variable. A variable that depends on one or more other variables The dependent
variable responds to the independent variable. It is called dependent because it \"depends\" on
the independent variable. So Answer Is D.
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, switches create a separate
collision domain for each port.
A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision
domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into
two collision domains. D is incorrect.
Solution
C is correct. While all Layer 2 devices split collision domains, switches create a separate
collision domain for each port.
A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision
domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into
two collision domains. D is incorrect..
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.
The following organisms are present in pod.
1. Prokaryotes, eg. Bacteria
2. Eukaryotes
a. Algae (plants)
b. Protozoans
3. Protists (unicellular eukaryotes)
Solution
Answer.
The following organisms are present in pod.
1. Prokaryotes, eg. Bacteria
2. Eukaryotes
a. Algae (plants)
b. Protozoans
3. Protists (unicellular eukaryotes).
AnswerThe mobile elements are the elerments move form one place t.pdf
Answer:
The mobile elements are the elerments move form one place to other place, where the particular
element is deficient.
The deficiency of mobile elements first appear in older leave whereas the deficency of the
immobile elements first appear in the younger leaves
The immobile elements are iron, calcium, manganese, zinc, copper and boron
Solution
Answer:
The mobile elements are the elerments move form one place to other place, where the particular
element is deficient.
The deficiency of mobile elements first appear in older leave whereas the deficency of the
immobile elements first appear in the younger leaves
The immobile elements are iron, calcium, manganese, zinc, copper and boron.
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Answer- high PCO2
Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions
by carbonic acid auses a drop in pH.
Solution
Answer- high PCO2
Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions
by carbonic acid auses a drop in pH..
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Ans: C
These are like private addresses in IPv4b in that they are not meant to be routed
Solution
Ans: C
These are like private addresses in IPv4b in that they are not meant to be routed.
Adherence to the geocentric model stemmed largely from several impo.pdf
Adherence to the geocentric model stemmed largely from several important observations. First
of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars
due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should
change considerably over the course of a year. If they did not appear to move, the stars are either
much further away than the Sun and the planets than previously conceived, making their motion
undetectable, or in reality they are not moving at all. Because the stars were actually much
further away than Greek astronomers postulated (making movement extremely subtle), stellar
parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the
two explanations. The lack of any observable parallax was considered a fatal flaw in any non-
geocentric theory. Another observation used in favor of the geocentric model at the time was the
apparent consistency of Venus\' luminosity, which implies that it is usually about the same
distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In
reality, that is because the loss of light caused by Venus\' phases compensates for the increase in
apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the
natural tendency of terrestrial bodies to come to rest as near as possible to the center of the earth,
and barring the opportunity to fall closer the center, not to move unless forced by an outside
object, or transformed to a different element by heat or moisture.
Solution
Adherence to the geocentric model stemmed largely from several important observations. First
of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars
due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should
change considerably over the course of a year. If they did not appear to move, the stars are either
much further away than the Sun and the planets than previously conceived, making their motion
undetectable, or in reality they are not moving at all. Because the stars were actually much
further away than Greek astronomers postulated (making movement extremely subtle), stellar
parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the
two explanations. The lack of any observable parallax was considered a fatal flaw in any non-
geocentric theory. Another observation used in favor of the geocentric model at the time was the
apparent consistency of Venus\' luminosity, which implies that it is usually about the same
distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In
reality, that is because the loss of light caused by Venus\' phases compensates for the increase in
apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the
natural tendency of terrestrial bodi.
1.This situation can exist because companies vary as to whether th.pdf
1.
This situation can exist because companies vary as to whether they are using an implicit or ex-
plicit set of assumptions when interest rates are disclosed. In the implicit approach, two or more
assumptions do not individually represent the best estimate of the plan’s future experience with
respect to these assumptions, but the aggregate effect of their combined use is presumed to be
approximately the same as that of an explicit approach. In the explicit approach, each significant
assumption reflecting the best estimate of the plan’s future experience solely with respect to that
assumption must be stated. As a result, some companies are presently using an implicit approach,
others an explicit approach. IAI19requires the use of explicit assumptions. As a result, this large
variance in interest rates will probably disappear to some extent. However, it should be noted
that companies will have some leeway in establishing discount rates. In addition, the expected
return on assets will also be different among companies.
2.
This situation will occur because of the pension liability required to be reported. That is,
companies are required to report as a liability the excess of their defined benefit obligation over
the fair value of plan assets and adjusted for unrecognized PSC and unexpected gains and losses.
In the past, the basic liability companies reported was the excess of the amount expensed over
the amount funded.
3.
This statement is questionable. If a financial measure purports to represent a phenomenon that is
volatile, the measure must show that volatility or it will not be representation ally faithful.
Never-theless, many argue that volatility is inappropriate when dealing with such long-term
measures as pensions. A good example of where dampening might be useful is the recognition of
gains and losses. If assumptions prove to be accurate estimates of experience over a number of
years, gains or losses in one year will be offset by losses or gains in subsequent periods, and
amorti-zation of unrecognized gains and losses would be unnecessary. The main point is that
volatility per se should not be considered undesirable when establishing accounting principles.
Although some managements may consider volatility bad, this belief should not influence
standard-setting. However, it is clear from some of the compromises made in IAS19that certain
procedures were provided to dampen the volatility effect.
4.
(a) In a defined contribution plan, the amount contributed is the amount expensed. No significant
reporting problems exist here. On the other hand, defined benefit plans involve many difficult
reporting issues which may lead to additional expense and liability recognition. Significant
amendments will generally increase past service cost which may lead to significant adjustments
to pension expense in the future.
(b) Plan participants are of importance, because the expected future years of service com-
putation can have an impact on the amortizati.
1.) Which second degree polynomial function has a leading coefficien.pdf
1.) Which second degree polynomial function has a leading coefficient of
Solution
1.) Which second degree polynomial function has a leading coefficient of.
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
1. Alanine has molecular formula: C3H7NO2
Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00
= 89.1 g/mol
2. Arginine has molecular formula: C6H14N4O2
Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x
atomic mass of O
= 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00
= 174.2 g/mol
3. Phenylalanine has molecular formula: C9H11NO2
Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00
= 165.2 g/mol
4. Tryptophan has molecular formula: C11H12N2O2
Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2
x atomic mass of O
= 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00
= 204.2 g/mol
5. Methionine has molecular formula: C5H11NO2S
Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O + 1 x atomic mass of S
= 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07
= 149.2 g/mol
Solution
1. Alanine has molecular formula: C3H7NO2
Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00
= 89.1 g/mol
2. Arginine has molecular formula: C6H14N4O2
Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x
atomic mass of O
= 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00
= 174.2 g/mol
3. Phenylalanine has molecular formula: C9H11NO2
Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00
= 165.2 g/mol
4. Tryptophan has molecular formula: C11H12N2O2
Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2
x atomic mass of O
= 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00
= 204.2 g/mol
5. Methionine has molecular formula: C5H11NO2S
Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O + 1 x atomic mass of S
= 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07
= 149.2 g/mol.
Yes. there are different types of H atoms in this.pdf
Yes. there are different types of H atoms in this molecule.
Solution
Yes. there are different types of H atoms in this molecule..
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
More Related Content
More from apleathers
QuestionWhat are the elements of safe drinking water act What ar.pdf
Question:
What are the elements of safe drinking water act? What are the aspect & provision for safe
drinking water act?
Solution
:
This act was passed in 2002. The main elements imposes in the act are providing the permissible
limit of contaminants in drinking water i.e. drinking water standard, establishes the rule for
operators of facilities, for drinking water systems, for laboratories that dealt with the drinking
water parameter testing, training & certification to operators & there are many other elements
that require for safe drinking purpose.
Its main aspect is to ensure the safety of consumers by drinking the potable water (the water
contain the contaminants up to prescribed limit given in the act. By consuming the potable water,
the diseases associated due to drinking of polluted water are minimized.
There are three parameters are described in the act. These are physical parameters, chemical
parameters, & biological parameters. Physical parameter includes suspended solid, turbidity,
dissolved solid, pH, hardness, acidity, alkanity etc. The chemical parameters include BOD,
COD, ThOD, DO, etc. The biological parameter includes E.coli, B.Coli bacteria, pathogenic
bacteria, disease causing bacteria. Amongst, three bacteria, it’s the biological parameters which
are very objectionable. The upper limit of this parameters are prescribed in the act upto which
the water are drinkable.
Note: All pollutant water are contaminants but its not necessary that all contaminant are
pollutant..
Programimport java.util.; import java.io.; class FoodTruck.pdf
Program:
import java.util.*;
import java.io.*;
class FoodTruck
{
String truckName;
double fuelintruck;
int numberofemplyees;
String menuItems[]=new String[5];
public void getData()
{
Scanner s=new Scanner(System.in);
System.out.print(\"Enter TruckName\");
truckName=s.next();
System.out.print(\"Enter Fuel in Tank \");
fuelintruck=s.nextDouble();
System.out.print(\"Enter number of employess in truck\");
numberofemplyees=s.nextInt();
System.out.print(\"Enter Menu Items\");
for(int i=0;i<5;i++)
menuItems[i]=s.next();
}
public void ckeckfuel()
{
if(fuelintruck<2.5)
System.out.println(\"Please refill your truck\");
else
System.out.println(\"Fuel is enough\");
}
public void displayMenu()
{
try
{
FileOutputStream fout=new FileOutputStream(\"Menu.txt\");
for(int i=0;i<5;i++)
{
byte b[]=menuItems[i].getBytes();
fout.write(b);
System.out.println(menuItems[i]);
}
}
catch(IOException e)
{
System.out.println(e.getMessage());
}
}
}
public class MyTruck1
{
public static void main(String ar[])
{
FoodTruck ft=new FoodTruck();
ft.getData();
ft.ckeckfuel();
ft.displayMenu();
}
}
Output:
Enter TruckNameFoodpanda
Enter Fuel in Tank 25.4
Enter number of employess in truck5
Enter Menu Itemssabji dal papad noodels paneer
Fuel is enough
sabji
dal
papad
noodels
paneer
Solution
Program:
import java.util.*;
import java.io.*;
class FoodTruck
{
String truckName;
double fuelintruck;
int numberofemplyees;
String menuItems[]=new String[5];
public void getData()
{
Scanner s=new Scanner(System.in);
System.out.print(\"Enter TruckName\");
truckName=s.next();
System.out.print(\"Enter Fuel in Tank \");
fuelintruck=s.nextDouble();
System.out.print(\"Enter number of employess in truck\");
numberofemplyees=s.nextInt();
System.out.print(\"Enter Menu Items\");
for(int i=0;i<5;i++)
menuItems[i]=s.next();
}
public void ckeckfuel()
{
if(fuelintruck<2.5)
System.out.println(\"Please refill your truck\");
else
System.out.println(\"Fuel is enough\");
}
public void displayMenu()
{
try
{
FileOutputStream fout=new FileOutputStream(\"Menu.txt\");
for(int i=0;i<5;i++)
{
byte b[]=menuItems[i].getBytes();
fout.write(b);
System.out.println(menuItems[i]);
}
}
catch(IOException e)
{
System.out.println(e.getMessage());
}
}
}
public class MyTruck1
{
public static void main(String ar[])
{
FoodTruck ft=new FoodTruck();
ft.getData();
ft.ckeckfuel();
ft.displayMenu();
}
}
Output:
Enter TruckNameFoodpanda
Enter Fuel in Tank 25.4
Enter number of employess in truck5
Enter Menu Itemssabji dal papad noodels paneer
Fuel is enough
sabji
dal
papad
noodels
paneer.
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description :
Active Directory :
In general the Active Directory is abbrevated as AD and is a directory service that Microsoft
developed for Windows domain networks. It is included in most of the available Windows
Server operating systems as a set of processes and services.
Considerations for designing a Active Directory :
Before moving on directly to the planning ang implementation of the Active Directory we just
need to get some major factors and their considerations into account so as to handle them
perfectly. When we are designing the Active Directory network, it is important to use the four
divisions (forests, domains, organizational units, and sites) to their maximum potential. Some of
the important factors/considerations are described below :
a) Active Directory elements :
When designing an Active Directory, we need to be completely clear of what each element or
part actually means and how it fits into the overall design.
b) Active Directory forest :
In general, the forest, in terms of Active Directory, basically means every domain, organizational
unit, and any other object stored within its database. The forest is the absolute top level of the
Active Directory infrastructure. We can have more than one forest in a company, which actually
represent the high level security boundaries, and can therefore improve security between
different business units or companies belonging to a single organization. The point behind the
forest is that we have all our domains and domain tree within the organization itself contained
within it. It is designed so that we can have a transitive links between all of the trees within one
forest.
c) Active Directory tree :
A tree with reference to the Active Directory basically refers to a domain and all of its objects
that merge into a single DNS name.
d) Organizational Units and the Leaf Objects :
In an Active Directory, Organizational Units abbrevated as OUs, which are also called as the
Containers, and the Leaf Objects, which are of non-containing objects such as computer accounts
and user accounts, are directly related. We can access the OUs and other objects through the
Microsoft Management Console (MMC) or through the Users and Computers tool in the
Administrative Tools.
e) Active Directory Sites :
The Sites and Services of the MMC is a utility that a lot of Windows administrators, particularly
in smaller organizations, completely overlook. This part of Active Directory, however, is one of
the most crucial parts to understand and implement correctly. These Sites give us a very unique
and well-designed approach to separate specific locations within the Active Directory. As the
principle of an Active Directory domain is global-meaning that it is meant to be the same
anywhere-it could present a problem for users who move from office to office, or for offices with
network connections that are slow. Active Directory sites allow one to specify the IP address
spaces or subnets used with.
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures;
public class HelloWorld >
{
public HelloWorld( )
{
root = null;
}
public void insert( AnyType x )
{
root = insert( x, root );
}
public void remove( AnyType x )
{
root = remove( x, root );
}
public AnyType findMin( )
{
if( isEmpty( ) )
System.out.println(\"tree is empty\");
return findMin( root ).element;
}
public AnyType findMax( )
{
if( isEmpty( ) )
System.out.println(\"tree is empty\");
return findMax( root ).element;
}
public boolean contains( AnyType x )
{
return contains( x, root );
}
public void makeEmpty( )
{
root = null;
}
public boolean isEmpty( )
{
return root == null;
}
public void printTree( )
{
if( isEmpty( ) )
System.out.println( \"Empty tree\" );
else
printTree( root );
}
private BinaryNode insert( AnyType x, BinaryNode t )
{
if( t == null )
return new BinaryNode( x, null, null );
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
t.left = insert( x, t.left );
else if( compareResult > 0 )
t.right = insert( x, t.right );
else
; // Duplicate; do nothing
return t;
}
private BinaryNode remove( AnyType x, BinaryNode t )
{
if( t == null )
return t; // Item not found; do nothing
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
t.left = remove( x, t.left );
else if( compareResult > 0 )
t.right = remove( x, t.right );
else if( t.left != null && t.right != null ) // Two children
{
t.element = findMin( t.right ).element;
t.right = remove( t.element, t.right );
}
else
t = ( t.left != null ) ? t.left : t.right;
return t;
}
private BinaryNode findMin( BinaryNode t )
{
if( t == null )
return null;
else if( t.left == null )
return t;
return findMin( t.left );
}
private BinaryNode findMax( BinaryNode t )
{
if( t != null )
while( t.right != null )
t = t.right;
return t;
}
private boolean contains( AnyType x, BinaryNode t )
{
if( t == null )
return false;
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
return contains( x, t.left );
else if( compareResult > 0 )
return contains( x, t.right );
else
return true; // Match
}
private void printTree( BinaryNode t )
{
if( t != null )
{
printTree( t.left );
System.out.println( t.element );
printTree( t.right );
}
}
private int height( BinaryNode t )
{
if( t == null )
return -1;
else
return 1 + Math.max( height( t.left ), height( t.right ) );
}
// Basic node stored in unbalanced binary search trees
private static class BinaryNode
{
// Constructors
BinaryNode( AnyType theElement )
{
this( theElement, null, null );
}
BinaryNode( AnyType theElement, BinaryNode lt, BinaryNode rt )
{
element = theElement;
left = lt;
right = rt;
}
AnyType element; // The data in the node
BinaryNode left; // Left child
BinaryNode right; // Right child
}
/** The tree root. */
private BinaryNode root;
public static void main( String [ ] args )
{
HelloWorld t = new HelloWorld( );
final int NUMS = 4000;
final int GAP = 37;
System.out.println( \"Checking... (no more output means success)\" );
for( int i = GAP; i != 0; i = ( i + GAP ) % NUMS )
t.insert.
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot work
Solution
it always attacks oxygen.the image doesnot work.
import java.util.Scanner;public class Fraction { instan.pdf
The document defines a Fraction class with methods to represent fractions, multiply fractions, and reduce fractions to their lowest terms. It includes constructors to initialize fractions to default or custom values, getter and setter methods, and a main method that demonstrates creating and manipulating Fraction objects.
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,
Please find the Ansswer below.
//PLAYLIST.h
#include
#include
#include
#include
using namespace std;
class Playlist
{
private:
string uniqueID;
string songName;
string artistName;
int songLength;
public:
Playlist() { uniqueID = \"\", songName = \"\", artistName = \"\", songLength = 0; };
Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength);
void InsertAfter();
void SetNext();
string GetID();
string GetSongName();
string GetArtistName();
int GetSongLength();
string GetNext();
void PrintPlaylistNode();
};
//PLAYLIST.CPP
#include \"Playlist.h\"
Playlist::Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength)
{
uniqueID = auniqueId;
songName = asongName;
artistName = aArtistName;
songLength = aSongLength;
}
string Playlist::GetArtistName()
{
return artistName;
}
string Playlist::GetID()
{
return uniqueID;
}
string Playlist::GetSongName()
{
return songName;
}
int Playlist::GetSongLength()
{
return songLength;
}
void Playlist::SetNext()
{
}
string Playlist::GetNext()
{
return \"\";
}
void Playlist::InsertAfter() {
}
void Playlist::PrintPlaylistNode()
{
cout << \"Unique ID:\" << uniqueID << endl ;
cout << \"Song Name:\" << songName << endl;
cout << \"Artist Name:\" << artistName << endl;
cout << \"Song Length (in seconds):\" << songLength << endl;
}
//PLAYSLITSNODE.h
#pragma once
#include \"Playlist.h\"
#include
class PlaylistNode
{
private:
std::list library;
Playlist get(list _list, int _i);
void PrintPlaylist(Playlist aPlayList);
public:
void Addsong(Playlist aPlayslist);
void Removesong(string aUnwiid);
void Changeposition(int oldPostion, int anewPostion);
void PrintSongByartist(string aAstist);
void PrintSongtotalLen();
void PrintFullPlayList();
};
//PLAYLIST.CPP
#include \"PlaylistNode.h\"
void PlaylistNode::Addsong(Playlist aPlaylist)
{
library.push_back(aPlaylist);
}
void PlaylistNode::Removesong(string aUnwiid)
{
if (library.size > 0)
{
for (it = library.begin(); it != library.end(); ++it)
{
if (it->GetID() == aUnwiid)
{
cout << it->GetSongName() << endl;
library.remove(*it);
break;
}
}
}
}
Playlist PlaylistNode::get(list _list, int _i) {
list::iterator it = _list.begin();
for (int i = 0; i<_i; i++) {
++it;
}
return *it;
}
std::list::iterator it;
void PlaylistNode::PrintFullPlayList()
{
for (it = library.begin(); it != library.end(); ++it)
{
PrintPlaylist(*it);
}
}
void PlaylistNode::PrintSongByartist(string aartiename)
{
for (it = library.begin(); it != library.end(); ++it)
{
if(it->GetArtistName() == aartiename)
PrintPlaylist(*it);
}
}
void PlaylistNode::PrintSongtotalLen()
{
int TotalSonglengst = 0;
for (it = library.begin(); it != library.end(); ++it)
{
TotalSonglengst += it->GetSongLength();
}
cout << \"Total songs Length (in seconds):\" << TotalSonglengst << endl;
}
void PlaylistNode::PrintPlaylist(Playlist aPlayList)
{
cout << \"Unique ID:\" << aPlayList.GetID() << endl;
cout << \"Song Name:\" << aPlayList.GetSongName() << endl;
cout << \"Artist Name:\" << aPlayList.GetArtis.
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution: A family can be defined as group of two or more people living in
a household and connected to each other by blood or adoption or marriage. Family as social
constitution serves to create and maintain the family life in correct ways which are considered
good by a society. It is not an objective institution as it serves to give shape to feeling and
emotions of family memberns in fundamental ways.
Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its
members. These small families are supported by increasingly reducing sized homes and are
easier to relocate. Further, small sized nuclear families can support the expensive education,
medication and other services to their children in a much better way as compared to the large
sized joint families.
Existence and characteristics of family structures: Some of the common family structures with
their characteristic features are as follows:
1: Nuclear family: The family with two generations i.e. parents and their children
2: Extended family: The family with three generations i.e. grandparents, parents and their
children constitutes an extended family.
3: Single parent family: The family in which one parent and children are residing in same
household is called as single parent family.
4: Reconstituted family: The family in which either or both of the parents have children from
their previous marriage living together are called as reconstituted family.
Characters of a family: A family is established by mating relation between man and woman
through marriage institution. Marriage is foundation of family irrespetive of mating relationship
without marriage. A family always resides in a common household wherein each family member
has his own name. Hence, marriage, common household, nomenclature of family members,
mode of interaction and communication and an economic provision are some of the
characteristics of a family.
Solution
Family as a Social Institution: A family can be defined as group of two or more people living in
a household and connected to each other by blood or adoption or marriage. Family as social
constitution serves to create and maintain the family life in correct ways which are considered
good by a society. It is not an objective institution as it serves to give shape to feeling and
emotions of family memberns in fundamental ways.
Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its
members. These small families are supported by increasingly reducing sized homes and are
easier to relocate. Further, small sized nuclear families can support the expensive education,
medication and other services to their children in a much better way as compared to the large
sized joint families.
Existence and characteristics of family structures: Some of the common family structures with
their characteristic features are as follows:
1: Nuclear family: The family with two generations i.e. parents and t.
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Internet is carried out by
working groups chartered by the IETF. Answers A, B, and C are incorrect.
Solution
D. The actual development of new standards and protocols for the Internet is carried out by
working groups chartered by the IETF. Answers A, B, and C are incorrect..
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other variables The dependent
variable responds to the independent variable. It is called dependent because it \"depends\" on
the independent variable. So Answer Is D
Solution
Dependent Variable. A variable that depends on one or more other variables The dependent
variable responds to the independent variable. It is called dependent because it \"depends\" on
the independent variable. So Answer Is D.
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, switches create a separate
collision domain for each port.
A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision
domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into
two collision domains. D is incorrect.
Solution
C is correct. While all Layer 2 devices split collision domains, switches create a separate
collision domain for each port.
A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision
domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into
two collision domains. D is incorrect..
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.
The following organisms are present in pod.
1. Prokaryotes, eg. Bacteria
2. Eukaryotes
a. Algae (plants)
b. Protozoans
3. Protists (unicellular eukaryotes)
Solution
Answer.
The following organisms are present in pod.
1. Prokaryotes, eg. Bacteria
2. Eukaryotes
a. Algae (plants)
b. Protozoans
3. Protists (unicellular eukaryotes).
AnswerThe mobile elements are the elerments move form one place t.pdf
Answer:
The mobile elements are the elerments move form one place to other place, where the particular
element is deficient.
The deficiency of mobile elements first appear in older leave whereas the deficency of the
immobile elements first appear in the younger leaves
The immobile elements are iron, calcium, manganese, zinc, copper and boron
Solution
Answer:
The mobile elements are the elerments move form one place to other place, where the particular
element is deficient.
The deficiency of mobile elements first appear in older leave whereas the deficency of the
immobile elements first appear in the younger leaves
The immobile elements are iron, calcium, manganese, zinc, copper and boron.
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Answer- high PCO2
Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions
by carbonic acid auses a drop in pH.
Solution
Answer- high PCO2
Explanation- CO2 combines with water to produce carbonic acid. The release of hydrogen ions
by carbonic acid auses a drop in pH..
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Ans: C
These are like private addresses in IPv4b in that they are not meant to be routed
Solution
Ans: C
These are like private addresses in IPv4b in that they are not meant to be routed.
Adherence to the geocentric model stemmed largely from several impo.pdf
Adherence to the geocentric model stemmed largely from several important observations. First
of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars
due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should
change considerably over the course of a year. If they did not appear to move, the stars are either
much further away than the Sun and the planets than previously conceived, making their motion
undetectable, or in reality they are not moving at all. Because the stars were actually much
further away than Greek astronomers postulated (making movement extremely subtle), stellar
parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the
two explanations. The lack of any observable parallax was considered a fatal flaw in any non-
geocentric theory. Another observation used in favor of the geocentric model at the time was the
apparent consistency of Venus\' luminosity, which implies that it is usually about the same
distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In
reality, that is because the loss of light caused by Venus\' phases compensates for the increase in
apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the
natural tendency of terrestrial bodies to come to rest as near as possible to the center of the earth,
and barring the opportunity to fall closer the center, not to move unless forced by an outside
object, or transformed to a different element by heat or moisture.
Solution
Adherence to the geocentric model stemmed largely from several important observations. First
of all, if the Earth did move, then one ought to be able to observe the shifting of the fixed stars
due to stellar parallax. In short, if the earth was moving, the shapes of the constellations should
change considerably over the course of a year. If they did not appear to move, the stars are either
much further away than the Sun and the planets than previously conceived, making their motion
undetectable, or in reality they are not moving at all. Because the stars were actually much
further away than Greek astronomers postulated (making movement extremely subtle), stellar
parallax was not detected until the 19th century. Therefore, the Greeks chose the simpler of the
two explanations. The lack of any observable parallax was considered a fatal flaw in any non-
geocentric theory. Another observation used in favor of the geocentric model at the time was the
apparent consistency of Venus\' luminosity, which implies that it is usually about the same
distance from Earth, which in turn is more consistent with geocentrism than heliocentrism. In
reality, that is because the loss of light caused by Venus\' phases compensates for the increase in
apparent size caused by its varying distance from Earth. Objections to heliocentrism utilized the
natural tendency of terrestrial bodi.
1.This situation can exist because companies vary as to whether th.pdf
1.
This situation can exist because companies vary as to whether they are using an implicit or ex-
plicit set of assumptions when interest rates are disclosed. In the implicit approach, two or more
assumptions do not individually represent the best estimate of the plan’s future experience with
respect to these assumptions, but the aggregate effect of their combined use is presumed to be
approximately the same as that of an explicit approach. In the explicit approach, each significant
assumption reflecting the best estimate of the plan’s future experience solely with respect to that
assumption must be stated. As a result, some companies are presently using an implicit approach,
others an explicit approach. IAI19requires the use of explicit assumptions. As a result, this large
variance in interest rates will probably disappear to some extent. However, it should be noted
that companies will have some leeway in establishing discount rates. In addition, the expected
return on assets will also be different among companies.
2.
This situation will occur because of the pension liability required to be reported. That is,
companies are required to report as a liability the excess of their defined benefit obligation over
the fair value of plan assets and adjusted for unrecognized PSC and unexpected gains and losses.
In the past, the basic liability companies reported was the excess of the amount expensed over
the amount funded.
3.
This statement is questionable. If a financial measure purports to represent a phenomenon that is
volatile, the measure must show that volatility or it will not be representation ally faithful.
Never-theless, many argue that volatility is inappropriate when dealing with such long-term
measures as pensions. A good example of where dampening might be useful is the recognition of
gains and losses. If assumptions prove to be accurate estimates of experience over a number of
years, gains or losses in one year will be offset by losses or gains in subsequent periods, and
amorti-zation of unrecognized gains and losses would be unnecessary. The main point is that
volatility per se should not be considered undesirable when establishing accounting principles.
Although some managements may consider volatility bad, this belief should not influence
standard-setting. However, it is clear from some of the compromises made in IAS19that certain
procedures were provided to dampen the volatility effect.
4.
(a) In a defined contribution plan, the amount contributed is the amount expensed. No significant
reporting problems exist here. On the other hand, defined benefit plans involve many difficult
reporting issues which may lead to additional expense and liability recognition. Significant
amendments will generally increase past service cost which may lead to significant adjustments
to pension expense in the future.
(b) Plan participants are of importance, because the expected future years of service com-
putation can have an impact on the amortizati.
1.) Which second degree polynomial function has a leading coefficien.pdf
1.) Which second degree polynomial function has a leading coefficient of
Solution
1.) Which second degree polynomial function has a leading coefficient of.
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
1. Alanine has molecular formula: C3H7NO2
Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00
= 89.1 g/mol
2. Arginine has molecular formula: C6H14N4O2
Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x
atomic mass of O
= 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00
= 174.2 g/mol
3. Phenylalanine has molecular formula: C9H11NO2
Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00
= 165.2 g/mol
4. Tryptophan has molecular formula: C11H12N2O2
Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2
x atomic mass of O
= 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00
= 204.2 g/mol
5. Methionine has molecular formula: C5H11NO2S
Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O + 1 x atomic mass of S
= 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07
= 149.2 g/mol
Solution
1. Alanine has molecular formula: C3H7NO2
Molecular weight = 3 x atomic mass of C + 7 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 3 x 12.01 + 7 x 1.008 + 1 x 14.01 + 2 x 16.00
= 89.1 g/mol
2. Arginine has molecular formula: C6H14N4O2
Molecular weight = 6 x atomic mass of C + 14 x atomic mass of H + 4 x atomic mass of N + 2 x
atomic mass of O
= 6 x 12.01 + 14 x 1.008 + 4 x 14.01 + 2 x 16.00
= 174.2 g/mol
3. Phenylalanine has molecular formula: C9H11NO2
Molecular weight = 9 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O
= 9 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00
= 165.2 g/mol
4. Tryptophan has molecular formula: C11H12N2O2
Molecular weight = 11 x atomic mass of C + 12 x atomic mass of H + 2 x atomic mass of N + 2
x atomic mass of O
= 11 x 12.01 + 12 x 1.008 + 2 x 14.01 + 2 x 16.00
= 204.2 g/mol
5. Methionine has molecular formula: C5H11NO2S
Molecular weight = 5 x atomic mass of C + 11 x atomic mass of H + 1 x atomic mass of N + 2 x
atomic mass of O + 1 x atomic mass of S
= 5 x 12.01 + 11 x 1.008 + 1 x 14.01 + 2 x 16.00 + 1 x 32.07
= 149.2 g/mol.
Yes. there are different types of H atoms in this.pdf
Yes. there are different types of H atoms in this molecule.
Solution
Yes. there are different types of H atoms in this molecule..
More from apleathers (20)
QuestionWhat are the elements of safe drinking water act What ar.pdf
QuestionWhat are the elements of safe drinking water act What ar.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description Active Directory In gen.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
import java.util.Scanner;public class Fraction { instan.pdf
import java.util.Scanner;public class Fraction { instan.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution A family can be defined as group of .pdf
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Int.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Answer- high PCO2Explanation- CO2 combines with water to produce c.pdf
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Ans CThese are like private addresses in IPv4b in that they are n.pdf
Adherence to the geocentric model stemmed largely from several impo.pdf
Adherence to the geocentric model stemmed largely from several impo.pdf
1.This situation can exist because companies vary as to whether th.pdf
1.This situation can exist because companies vary as to whether th.pdf
1.) Which second degree polynomial function has a leading coefficien.pdf
1.) Which second degree polynomial function has a leading coefficien.pdf
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
1. Alanine has molecular formula C3H7NO2Molecular weight = 3 x at.pdf
Yes. there are different types of H atoms in this.pdf
Yes. there are different types of H atoms in this.pdf
Recently uploaded
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
A Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.CACJapan - GROUP Presentation 1- Wk 4.pdf
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
Recently uploaded (20)
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
A Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance.pptx
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Simple logic... The reason is the radical interme.pdf
- 1. Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene. Solution Simple logic... The reason is the radical intermediate is more stable on the tertiary carbon of methyl butene where as it would be a secondary intermediate for pentene.