1. CURRICULUM VITAE
of
AL M. SIBUG
Present address - Banaba West, Batangas City, Philippines
Mobile. 0063 908 749 1535
E-mail address - al_sibug@yahoo.com
POSITION DESIRED Electrical Technician
CAREER PROFILE
Over 25 years of experience in the field of electrical maintenance, operation, troubleshooting, installation, construction,
start-up and commissioning.
Competent in fault-finding, testing and repairing malfunctions of motor control center, ups, switchgears, protection relays,
gas turbines and generator control panel, electrical equipments / machineries and control systems in major oil and gas
industry.
Good knowledge and understanding of electrical equipment usage in hazardous environments, permit to work (PTW)
system, LO/TO and maintenance management system.
Good interpersonal and communication skills and the ability to work successfully as part of a team.
OTHER SKILLS
1. Driving of any light vehicle
2. Operates manlift truck, forklift, telehandler, scissor lift and wheel loader
EMPLOYMENT RECORD
Name of company : Marathon Oil Company
Malabo, Equatorial Guinea, West Africa
Nature of Business : Oil and Gas Exploration and Production (onshore/offshore)
Sponsor : Wood Group Equatorial Guinea
Date : August 2008 up to July 2016
Position : Electrical Technician
Job Descriptions and Responsibilities
Performs preventive and corrective maintenance of motors, motor control, diesel and gas generators, HV/LV switchgears,
ups system, battery chargers, transformers, frequency converters(VFD), pumps and overhead compressors.
Troubleshooting, repairs and modification of control system. Verifies lockout / tag out execution. Performs insulation test,
polarity test, vacuum circuit breaker integrity test, secondary / current injection, transformer oil dielectric test and ground
resistance test.
Startup, commissioning and testing of newly installed equipments.
Performs the same duties in offshore platforms Alba A, Alba B and Alba C.
Name of Company : Qatar Petroleum
Doha, State of Qatar
Nature of business : Oil and Gas Recovery and Refinery (onshore/offshore)
Date : October 1996 to December 2005
Position : Electrical Technician
Job Descriptions and Responsibilities
Performs preventive and corrective maintenance, troubleshooting and repair of ups, HV/LV switchgears, stand-by
generators, auto-transfer switch,VFDs (Hill-Graham Control), boilers, chillers, booster pumps, cooler fans, compressors,
gas turbines and it’s auxillaries, water treatment plant (RO unit), turbo expanders, solar panels, and motor controllers
such as GE Multilin motor manager 3, Siemens motor manager and P+B Goldstart. Modifies and rewires its control
circuits when needed for emergency operation.
Repairs HV/LV switchgears such as mechanical mechanism malfunctions, VT, CT, and limit switches replacement.
Performs testing overload relays using current injection machine.
Coordinates with the vendors and contractors for commissioning and testing of plants expansion projects for proper
operability.
-1-
2. Receive work orders, inspect machinery and decide in consultation with the supervisor the extent of work and any special
features to be considered. Prepares take-off from drawings for preparation of priority jobs.
Follow up and ensure repair and maintenance is carried out in accordance with established craft standards and
schedules. Provides technical assistance during the start-up and shutdown of critical equipments and systems.
Frequently contacts the production supervisors and technicians to coordinate and carry out work requirements and
recommend remedial measures to be carried out following damage.
May supervise the work of trainee / junior technicians and contract staff.
Name of Company : S0NARCO- Algeria
(A joint company of SONATRACH- Algeria and ARCO-USA)
Rhourde El Baguel,Algeria
Nature of business : Oil and Gas Recovery and Refinery
Date : June 06, 1992 to August1996
Position : Electrical Technician
Job Descriptions and Responsibilities
Performs the final quality functional checkout and operation of all electrical devices in the oil and gas expansion project.
Performs primary and secondary current injection test for protection relays in HV/LV switchgears and overload trips of
mcc.
Troubleshoots the control system and minor repairs of gas turbines and its auxiliaries,cooler fans, boilers, chillers, booster
pumps, RO plant, compressors, VFDs, GE multilin 3, Siemens motor manager 3 and ups (Gotor and Chloride) for proper
operability. Ensures compliance with codes and specifications.
Performs high potential test and insulation resistance test.Takes the polarization index of power transformer and high
voltage motors.
Assist the run test of turbo generator (Pignone and Solar), turbo compressors and high voltage motors. Checks and
proves the lockout and shutdown facilities for safe start up.
Coordinates with the vendors and contractors for commissioning and testing of plants expansion projects for proper
operability.
Supervises a composite crew of local and expatriate technicians to perform the services on the job training for the local
craftsmen.
Name of Company : Caltex Refinery (Philippines)
San Pascual, Batangas, Philippines
Nature of business : Oil and Gas Refinery / Petrochemical
Sponsor : CMI Consulting and Engineering Company
Date : February 1990 to March 1992
Position : Industrial Electrician
Job Descriptions and Responsibilities
Receive assignments from the senior technician and establish requirement for tools, parts, man-hours, plan layout and
procedures for repairs, modification or replacement.
Carry out under supervision maintenance checks on running / live equipment and machinery and collect equipment
readings on regular basis.
Carry out the wiring and installation of sketches by architects and engineers from which electrical plans can be performed
such as modifications, repairs and rewirings of all electrical controllers and protections.
Performed hi-pot test and megger test (pressure and insulation test) for large machines such as motors and transformers.
Repairs HV/LV switchgears such as mechanical mechanism malfunctions, VT, CT, and limit switches replacement .
Repairs and troubleshoots of control circuits of crude oil booster pump, compressors, boilers, chillers, cooling fans, stand-
by generators, ups, fire alarm system, ESD facilities, equipment settings and parameters.
Ensure that work is carried out in accordance with safety and fire regulations and good housekeeping practices.
Performs other electrical related jobs.
-2-
3. R E F E R E N C E S
1. David Phillips / Stephen Mitchell
Electrical and Instrument Supervisor
Marathon Oil Co.
Malabo, Equatorial Guinea
Tel no.001281 994 2100 extn 1229/1240
2. JAMES BRUCE BEARD
Electrical Engineer, Oil and Gas onshore / offshore operation and maintenance
Qatar Petroleum, State of Qatar
Tel.no. (+974) 471 7417
3. MIKE H. GORDON
Electrical Engineer, SONARCO Algeria
Rhourde El Baguel, Algeria
Tel.no. (1 972) 6336909
4. CARLOS M. ILAGAN
Manager, CMI Consulting and Engineering Company
Caltex Refinery
Sta Rita, Batangas City, Philippines
Tel.no. (+63) 43 727 2238
- 3-
4. P E R S O N A L D A T A
Name - AL M. SIBUG
Present address - Banaba West, Batangas City, Philippines
Mobile 0063 908749 1535 (roaming)
E–mail address - al_sibug@yahoo.com
Date of Birth - August 13, 1965
Place of Birth - Manila, Philippines
Height / Weight - 165 cm / 64 kg
Sex - Male
Status - Married
Nationality - Filipino
Passport number - EC1654283
Expiration date: - July 17, 2019
EDUCATIONAL ATTAINMENT / TRAINING
COLLEGE - Bachelor of Science in Electrical Engineering
Golden Gate Colleges
Batangas City, Philippines
Graduated 1989
TRAINING - Industrial Electricity
1990, Technical Education and Skill Development Authority
- AutoCAD (Release 14)
2000, Informatics - Autodesk
- Operation and Maintenance of Generators
2002, 2H Energy
- Electrical Maintenance (Gas Plant)
2002, Snamproggeti
- Basic Life Support
2004, Qatar Petroleum
- Permit to Work (level 1 & 2)
2004, Qatar Petroleum
- H2S and Breathing Apparatus
2005, Qatar Petroleum
- Health and Safety Awareness Training
2006, Absolute Health & Safety (AHS), Ireland
- Basic Programable Logic Control (PLC)
2007, Technical Education and Skill Development Authority (TESDA)
- Life Critical Procedure Training (Safety Excellence Program)
2010, Marathon E. G. Production Ltd., Equatorial Guinea
- Operation and Maintenance of UPS
2013, LTI Power System, Ohio, USA
- 4 -