ITCO (Iranian Turbine Company) started writing his history in 2011 and was founded on knowledge-basis Company and is owned by IDRO with 49% and PADICO with 51% shares. ITCO activities area: Aviation, Oil, Gas, Petrochemical and Power Plant industries.

1. www.itcopower.com
ITCOSmall scale power plant executive
GetmoreempoweredwithITCO
ITCO

2. ITCO(IranianTurbineCompany)startedwritinghis
history in 2011 and was founded on knowledge-basis
Company which it has been approved by Presidency
of the Islamic Republic of Iran Vice-Presidency for
Science and Technology.
ITCO is owned by IDRO with 49% and PADICO
with 51% shares.
IDRO being the main hand of power for the indus-
try minister of Iran. IDRO concentrates on an over-
view of previous performance aiming to operational-
ize the development plans as well as to continue the
trend of industrial investment within the framework
of laws and regulations.
PADICO owns many aviation related companies and
is considered one of the few private aircraft manu-
facturing organizations in Iran.
ITCO is in vendor list of the National Iranian Oil
Company (OIL) and it has been announced that
ITCO is one of the first manufacturers of 1 to 5 MW
turbines and is the second largest and most reliable
company in the production of turbines.
ITCO INTRODUCTION

3. OPS-2500 portable power plant in the di-
mensions of a trailer, designed to the sup-
ply of electrical energy to units that are
far from the national electricity grid and
power supplies, or power supply to indus-
trial and residential units at the peak of
consumption or power failure and other
emergency cases.
Engineering
Consulting
S e r v i c e s
ITCO
Mobile
powerplant
ITCO, with experience in the construction of gas power plants (Reciprocat-
ing motors), provides the following services in the area of small scale power
generation licenses:
1- Preparation of the technical and financial justification of the power plant to be provided to
banks and financial institutions for obtaining loans and financing.
2- Preparation and presentation of a preliminary feasibility study for the installation of CHP at the same
time for heating and cooling utilizations.
3- Obtaining an agreement on the construction of Power Plant from Regional Distribution and Electricity Company.
4- Getting technical approval of the CHP project from the Technical Center for Small Scale Generators.
5- Preparation of power plant connection to power grid and obtaining network connection confirmation from Region-
al Distribution and Electricity Company.
6- Obtaining permit for the construction of a power plant, preparing and arranging a guaranteed power purchase
contract with Regional Distribution and Electricity Company.
7- Getting technical environmental approval.
ITCO, with experience in purchasing and constructing a complete 8 megawatt gas power plant (Reciprocating en-
gines), provides the following services in the field of equipment supply and power plant investment:
1- Advice on financing the project and obtaining domestic and foreign loans.
2- Procurement with the best price from the trusted Brands.
3- Investment and partnership in the field of power plant.
4- Getting financing and introducing financer.
8 MW Gas Power Plants - Esfahan

4. ITCO is a provider of the following services in the design, installation and commissioning of
gas generators (Gas Engine and Turbine):
• Internal design of the power plant.
• Design of power plant plan based on selective equipment.
• Architectural and structural design.
• Provide the final design of the heat recovery system.
• Consultation on the CHP piping system design.
• The final design of how to connect generators and transformers.
• Provide layout for generators and transformers and power boards.
• Design of low voltage compression cable (from generator to synchronous panel and transformer)
• Design of low-current cabling, control and protection.
• Synchronous panel design.
• Medium-current cable design.
• Design of Medium-current power boards.
• Design of busbar system and switch gear.
• Switching substation design, protective and measurement power boards.
• Provide a single-line diagram including protection system.
• Provide technical specifications for required relay protection.
• Provide conceptual model and determine the level of internal monitoring and control of the power plant.
• Provide SCADA conceptual model.
• Determine the main specifications of the equipment required by SCADA in
coordination with Regional Distribution and Electricity Company.
• Presentation of the control system and CHP accurate tools.
• Design of public and protection facilities.
• Designing a public electrification system.
• Designing an emergency power system.
• Fire system design.
• Design of gas supply system.
Technical and Engineering services ITCO

5. With the expertise and technical
knowledge of skilled and experienced
personnel, ITCO is ready to provide services
in the field of licensing, design and construction
of solar, wind power plants and new energies (biomass,
geothermal, heat losses recovery, etc.).
1- Initial design and obtaining permission for the initial construc-
tion of the wind and solar power plant.
2- Implement and prepare a plan for connecting the solar and wind power
network and obtaining a connection to the network.
3- Provision of a contract for the purchase of solar and wind power.
4- Design and installation of solar and wind power plants, including:
4-1- wind power plant
• The study of the principles of wind power plants and technology of wind turbines.
•Preliminary study of wind regime in windy areas and performing micrositing using Sana wind data and
preparation of feasibility reports.
•Supervising the installation and commissioning of anemometer towers in information stations and analyzing them
on a daily basis.
•Wind power micrositing and providing final reports on economic feasibility.
4-2- solar power plant
•Elementary modeling and general architecture of a solar power plant and characteristic of voltage-current of the cell
undertemperatureandvariableradiationintensity.
•Training how to arrange and connect series / parallel arrays according to the characteristics of the inverter and the
types of arrangements available to select inverters.
•Modeling of Solar Cells and Inverters in DIgSILENT and PV Syst power flow and Short Circuit Studies.
•How to protect and select the Circuit breaker / relay / fuse on both sides of the DC and AC and to make the protec-
tion settings and coordinate between them.
•Performing harmonic measurements and providing a practical solution for reducing harmonics and losses.
•Ground system studies and all sorts of groupings for Trans solar power plant and its optimal selection.
•ModelingofvarioustypesofshadingmodesonpanelsandphenomenasuchasPIDandLIDandtheirreductionstrategy.
•Panel efficiency by taking shadow and hotspot shadow effects, calculating PID and LID, and physical design.
•Calculate the dimensions and number of stacker panels and how to install.
•Calculate the type and number of trackers for panels if needed.
•Calculate and determine the final price of solar equipment, installation and commissioning costs.

6. Presence in the Oil, Gas and Petrochemical Industries
Based on the experience and technical knowledge of our experienced and skilled personnel, ITCO is ready to
provide the following services.
Engineering consulting and construction in the fields of oil, gas and petrochemical industries, design and
implementation of transmission lines and structures, including technical and economic studies, designing and
detailed engineering, procurement services, construction, surveillance services workshop on installation and
building, superior supervision, inspection of installations and machinery, export and import of allowable goods,
are the following activities:
• Designing air conditioning systems (HVAC) of Oil platforms, refineries, petrochemicals, power plants and office
complexes.
• Design of pipelines with stress analysis and support of Oil, Petrochemicals and industrial installations.
• Designing all the accurate tools systems for Oil, Gas, Petrochemical and power plants.
• Design of all electrical systems in the field of Oil, Gas, Petroc hemical and power plants.
• Design of all structural systems in the field of Oil, Gas, Petrochemical and power plants.
• Design of gas pressure boost station projects.
• Preparation of technical proposal in Oil, Gas and Petrochemicals projects.
• Engineering services in the fields of plumbing, mechanics, electricity, safety accurate instruments.

7. M
AN
Catterpillar
W
artsila
M
TU
D
eutzM
W
M
D
IgSILEN
T
Th
erm
o
Flow
PV
Syst
Etap
Catia
PD
M
S
SolidW
ork
Jenbacher
ITCO, based on the scientific ca-
pabilities of its experts and wide-
spread technical, engineering and
financial capabilities, has been
able to directly and effectively
communicate with the most pres-
tigious international companies
producing gas engine motors and
couplers, with obtaining Memo-
randums of Mutual Cooperation
and direct support from these
companies in the country and the
Middle East.
International Network
Engineering Software
ITCO is active in the design,
technical production and quali-
ty control services and uses spe-
cialized software for consulting,
design, installation and com-
missioning projects.
Chrism
arine

8. (‫)دانش بنیان‬
IRANIANPOWERDEVELOPMENT
TURBINE COMPANY (PJS)
ITCO
IRANIANPOWERDEVELOPMENT
TURBINE COMPANY (PJS)
ITCO
Info@itcopower.com
www.itcopower.com
Contact us
5th floor Ario ekbatan
building, Nafisi Blv,
Ekbatan Town, Tehran
+ 9 8 - 2 1 - 4 4 6 9 9 1 2 0 - 2
+ 9 8 - 2 1 - 4 4 6 9 5 0 5 4
Designer:NafiseShahbazi@yahoo.com