ACE Energy Equipment Pvt Ltd manufactures a wide range of boilers and thermic fluid heaters with capacities ranging from 500 kg/hr to 25 lac kcal/hr. Their product lines include fully wet back 3 pass boilers, dry back 2 pass boilers, and thermic fluid heaters. They offer after-sales service such as spare parts supply and periodic servicing through service contracts. ACE Energy Equipment supplies boilers to various industries including textiles, pharmaceuticals, chemicals, rubber, metals, petroleum, construction, food, paper, printing, and minerals.
2. ACE ENERGY EQUIPMENT PVT LTD has a rich experience in energy field.
AEE in house Design and Manufacturing facility both Boiler and Thermic
Fluid Heater.AEE offers wide range of boilers that ful- fill the needs of
Industry.
Range
Capacity -1000 to 5000 Kg/hr
W.Pressure - 10.54 to 21 Kg/cm2
Fuel - Coal, Wood & Agro waste
Salient Features
• Centric tube arrangement is ensures
effective water circulation and better
heat transfer
• More steam space and water holding
ensures sturdy steam flow
• The optimum velocity of gases through
the convective tubes ensures high
coefficient of heat transfer and keeps
the tube clean for long periods.
FULLY WET BACK 3 PASS BOILER(ACETEC-FBW)
3. Range
Capacity - 500 to 1500 Kg/hr
W.Pressure - 10.54 to 17.5 Kg/cm2
Fuel - Coal,Wood & Agrowaste
Salient Features
• In built furnace hence less heat loss
• Higher great area more combustion
• Higher Heating Surface area
• Easy approach for all parts of the
boiler
• Convenient for O&M
DRY BACK 2 PASS BOILER(ACETEC-DB)
Range
Capacity - 2000 to 5000 Kg/hr
W.Pressure - 10.54 to 21 Kg/cm2
Fuel - Coal,& Husk/Agro waste
Salient Features
The Fuel firing is done directly inside the
boiler for pulverised fuel and the resultant
advantages of compactness higher efficiency
Completely automatic ,less man power and flexibility
in operation
Reduces waste of fuel while transporting
Minimum space requirement
FULLY WET BACK 3 PASS BOILER(ACETEC-FBH)
4. Range
Capacity - 1000 to 12000 Kg/hr
W.Pressure - 10.54 to 24 Kg/cm2
Fuel - HSD,LDO,FO & Gas
Salient Features
Eccentrical three pass with stiffened
furnace.
Fully water submerged reversing
chamber of furnace provides complete
fuel combustion and heat absorption
and with out flame impingement
yielding higher thermal efficiency.
Suitable for most of oil as well as gas
firing consistent performance
The burner assures precise control
over the air fuel ratio through out the
modulating range
The large furnace area ensure a low
furnace exit temperature and avoids
the risk of tube cranking and leakage.
More water –steam interface area is
ensures sturdy steam flow
FULLY WET BACK 3 PASS BOILER (ACETEC-FBO)
Range
Capacity - 3000 to 12000 Kg/hr
W.Pressure - 10.54 to 24 Kg/cm2
Fuel - Wood,Husk,Coal and Agro waste
Salient Features
• Higher free board space
• Ideal for more volatile content fuels
• Less refractory in furnace
• Evaporation of steam is fast
• Minimal radiation losses due to water
wall panelled radiant furnace.
• Flexibility to use different fuels with
minimum changes in the fuel feeding
system
• Minimum usage of refractory in furnace
hence lower maintenance& minimum air
leakage
MEMBRACE WATER WALL WITH SHELL TYPE BOILER
(ACETEC-MWS)
5. Range
Capacity -2 Lac to 25 Lac Kcal/hr
W.Temp - Up to 360 Deg C
Fuel - HSD,LDO,FO,Wood,Husk
Salient Features
Salient Features
• Designed according to DIN 4754 to
ensure longer life of heater and thermic
fluid.
• The combined radiant and convective
coil arrangement
• A equate furnace volume and heat
transfer surface ensure higher thermal
efficiency
• ASME Code compact Deaerator –cum-
Expansion Tank requiring less space,
• It comes with a buffer vessel to prevent
cooling of hot oil coming from the
process.
THERMIC FLUID HEATER (ACETEC-TFW)
ACE ENERGY EQUIPMENT PVT LTD.,
DP-5,SIDCO Industrial Estate,
KAKKALUR-602003,Thiruvallur(Dt),Tamil Nadu.
ph ;9884610050,044-26880263,9444001080
E-Mail-sales@aceenergyequipment.com,www.aceenergyequipment.com
AFTER-SALES-SERVICE APPLICATION
By adopting a dynamic and integrated
approach our experienced team of
engineers provide a truly and tested service
to the customers including supply of spare
parts. On request we do carry out periodical
service of our boilers on yearly service
contract.
We under take projects involved in our
products on turnkey basis which includes
design and supply of boiler, accessories,
stem and utility piping etc.,
Our wide range of boilers to the needs of
various Industries such as:
Textile
Pharmaceutical & Chemical
Rubber & Metal
Petroleum & Construction
Food
Paper and Printing
Mineral & Environmental