Abdul Moiz Ahmed is a mechanical engineer from Karachi, Pakistan seeking a challenging role in health and safety. He has over 2 years of experience in plant maintenance, HSE, and training at Engro Polymer & Chemicals Ltd. His responsibilities there include troubleshooting pumps, maintenance and repairs, and performing preventive and corrective maintenance. He has experience with gas turbines, compressors, pumps, and other equipment. He also holds safety and risk management certificates.
1. Abdul Moiz Ahmed
Email: abdulmoizahmed07@gmail.com
Karachi, Pakistan.
C A R E E R O B J E C T I V E
To acquire a challenging, creative role to work on projects in the field of health & safety by learning new
standards & implement best practices for the betterment of my organization.
Career Summary
Around 02 Years’ experience in Plant Maintenance, HSE and Training. Presently, I am working with
Engro Polymer & Chemicals Ltd, the largest Petrochemical Complex of Pakistan.
W O R K E X P E R I E N C E
Jan 2016 Till To-Date |Engro Polymer& Chemicals Limited Pakistan|
Responsibilities:(asAssistantEngineer)
troubleshootingcentrifugal pumps
maintenance repair and overhaul of pumps
Alignment
Daily Surveillanceand monitoringof machines
Maintain documentation and checklist
Preventive and corrective maintenance
HOT GAS PATH INSPECTON (HGPI) with firststage nozzle and buckets replacement and bearingno 2
inspection of Hitachi Gas Turbine(H-25) 25 MW.
Jan 2014 Till Jan 2016 |Engro Polymer& Chemicals Limited Pakistan|
Responsibilities: Trade Apprentice (asTrainee Assistant Engineer)
Major overhaulingof aero derivativegas turbine
HOT GAS PATH INSPECTON (HGPI) with firststage nozzle and buckets replacement of Hitachi Gas Turbine
(H-25) 25 MW.
Packingand rider,Piston ringreplacement doubleactingreciprocatingfuel gas compressor.
Overhaulingof boiler feed water pump.
Centrifugal Pump overhauling
Coolingtower bladeadjustment and gear box overhauling.
Overhaulingof flooded type screw compressor.
Performed alignment of pumps and aero derivativegas turbine.
Maintain documentation and checklist
Preventive and corrective maintenance
Firewater pump test run
Diesel engine generator test run
Certificate Courses
Process Safety & Risk Management (PSRM)
Personal safety Management (PSM)
Work permit
Training Includes(Pak Swiss) :
Work on different projects monthly
2. Conventional Machines (e.g. Lathe, Milling,Shaper,Drilling,SurfaceGrinder,Cylindrical Grinder and Tool
& Cutter Grinder).
C.N.C Lathe, Milling and Wire Cut (Operating and programming).
Design and development of Tool, Dies & Mould (e.g. Press Tool).
Handling individual as well as group projects.
Personal & Computerskills
Leadership & Supervisory
Communication skills
SAP
Maximo
Auto-Card
Pro E 4.0
Microsoft Office
Academics
2016 Indus UniversityKarachi
B-Tec(Pass) inMechanical
2013 Pak Swiss Training CenterKarachi
4 yearsDiplomainMechanical Technology
2009 Al Farooq Secondary School
Science Group
References
Will befurnished upon request