1. 1 | P a g e
ZaHIDBashir
S/o Bashir Ahmed
OBJECTIVE:
 To work in a stimulating environment where I can apply & enhance my knowledge, skill to serve the
firm to the best of my efforts.
ACADEMIC RECORD:
 Diploma of Associate Engineer (Mechanical) in 2011with 80% marks from PBTE Lahore.
 Metric (Science) in 2008 with 77% marks from BISE Bahawalpur.
PROFESINAL TRAINING:
 Two years Apprenticeship as a Mechanical Technician from may 2013 to may 2015 in Fauji
Fertilizer Co. Ltd. (FFC)
 Complete theoretical study and workshop practical about all rotary and stationary equipments.
WORK EXPERIENCE (04+ YEARS):
 Fatima FertilizerCompany (FFCL)
One year experience as a millwright technician at FFCL since 2012 to 2013
 Fauji FertilizerCompany(FFC)(03years )
since April 2013 topresent
Currently I have been working in Fauji Fertilizer Company Mirpur Mathello at Ammonia & Urea
Plants as a Mechanical technician in maintenance department.
Postal address : House No.15/D, Block Y, Street No. 3
Sattelite town, Sadiqabad.
Cell # : +923027658922
E-mail Address : zahidbashir38@gmail.com
Domicile : Punjab (Rahim yar khan)
Marital Status : Married
Religion : Islam
CNIC # : 31304-2704787-3
Passport no : CC3847871

2. 2 | P a g e
Current Responsibilities
 My responsibilities are to assist my engineers and supervisors in order to accomplish the specific tasks
of maintenance of rotary equipments like Pumps, Compressors, turbines, blowers etc completely
 Routine checking and condition monitoring of plant running machines on daily and weekly basis is also
in my responsibilities.
 Trouble shooting of Turbines for routine maintenance and corrective, predictive maintenance.
 I also handle the contractor`s and daily wages man power under me according to the nature of job.
 Issuance and arrangement of spare parts using in maintenance activity and arrangements of special
tools using in job like rigging, pulling, jacking tools are also my responsibilities
 Inspection of all new spares of machines like Rotors, shafts, bearings, bearing housings, its also my
responsibilities
 Making the job reports and history cards of jobs is also my responsibilities
 Doing work by taking safety measures and safety gadgets by following the HSE and IMS policies of FFC
is also my responsibilities.
KEY SKILLS
Detail of my overall hand on experience on different equipments is discussed below.
Centrifugal Compressors
 Centrifugal compressorpreventive maintenance,completeoverhauling(NuovoPignone,Borosig)
 Co2 Gas Compressor2 BCL 306A (.NuovoPignone).
 AirCompressorMCL type (Borsig).
(Horizontal split & vertical split both design compressor’s overhauling and trouble shooting
Centrifugal Pumps
 Centrifugal Pumps preventive maintenance & complete overhauling.
 Fitting of Mechanical seal.
 Single Stage (over hang) Pump, Pompe Gabbonita Italy, Labor.
 Multi Stage & Single Stage, sub mersible pump, KSB. Syndine
 Single Stage double suction, Sun strand Corp USA, Worthington.
 Over hauling of High pressure multi stage.
Positive Displacement Compressor
 Complete overhauling of Natural Gas Compressor(Novo Pignone)
 Complete overhauling of “Y” type double acting double stage PD Air Compressor (Worthington)
 Routine monitoring, troubleshooting, Preventive maintenance and periodic inspection of gas end and
power end of heavy duty natural gas booster compressor of Novo Pignone (Type 2He,)
 Complete overhauling of small vertical air compressor for engine carburetor supply.
 Currently I worked on complete installation and erection of a heavy duty natural gas booster
compressor of Novo pignon ( Type 4HE/2,)
Positive Displacement Pumps
 Overhauling of high pressure positive displacement pump.
 Uraca PD pumps (25-250Kg/cm2). Type KD 827, Stroke 270 mm.
 Peroni pump.
 Worked on number of screw type pumps,gear pumps. (Make Allwieller, Pompe Guinard).

3. 3 | P a g e
Steam Turbine
 Complete overhauling of steam turbine V32 of Aeg Kanis and new electronic Governor installation
 Complete overhauling of Nuovo Pignone steamturbine
 Complete overhauling of v25 turbine of Aeg Kanis (Power 8Mw)
 And many small impulse type steamturbines of Worthington France, CoupsUSA
 Maintenance of ESV, Control valve, Servo motor and Governing system
 Reclamation of Bearings
Power Transmission Machines
 Complete overhauling of cooling tower fan double reduction gearbox.
 Overhauling of Torque Converter use to drive the P.D. pump (Uraca 250kg/cm2).
 Work has done on Induction and Reduction gearboxes.
 Complete overhauling of Fluid Couplings.
ID & FD Fans
 Complete overhauling of ID & FD fans of cooling tower and boiler preheaters with respectively.
 Complete overhauling of Furnace Blowers.
Valves Maintenance
All Types of valves including pressure seal valves, their passing problem rectification, pressure seal gasket
problem, leakage attend (gland, bonnet, and body) by clamping or welding box-up or sealant injection
Heat Exchangers
 Tube pulling, changing, rolling, plugging
 Shell & Tube type, Plate type, Fins Type
 Hydraulic test and SFT
 H.P jetting and scrapping
Tank &vessel
 All stationary equipment repair/maintenance by cutting, grinding and welding.
 Column, vessels, tanks, and silencer
Certificate & awards
 Antifriction Bearing training by SKF.
 First Aid Training Cardio pulmonary resuscitation by a doctor.
 Successful and Safe Erection / commissioning of gas turbine and HRSG.
 Training course about vibration monitoring system.
 Fire Fighting Certificat Annual competition arranged by safety unit.
 English Langage course by leader langage center.
Safety trainings:
Attend many trainings about plant safety and hazard analysis in technical training center at FFC Mirpur
Mathelo & FFC Goth Machi.
 Fire fighting training.
 Skill improvement course depend on Risk assessment & determining control.
 Emergency Response.
 Personal Protective Equipment.
 SCABA training.
Hose handlings.
 Fire extinguisher.
 Ammonia Dry run.

4. 4 | P a g e
 Work permit procedure.