Victor Groves has over 40 years of experience in piping system design and plant layout for petrochemical, refining, nuclear, and offshore industries. He has extensive experience conceptualizing plot plans, orienting equipment like towers and drums, and manually designing and drafting piping plans and isometrics. Some of his project experiences include work on refineries, chemical plants, LNG facilities, and offshore oil rigs. He is proficient in 3D CAD programs and plant design software and has experience supervising teams and managing projects.
1. Victor Groves
6315 Thornton Dr. Missouri City, TX 77459
832-387-2571 groves_victor@yahoo.com
Piping System Design/Plant Layout
A Recognized Expert in Petrochemical, Refining, Nuclear, and Offshore Industries,
Experienced in All Aspects of Piping System Design
Over 40 years of comprehensive experience in the layout and design of piping systems for the
Petrochemical, refining, nuclear, and offshore industries seeking increased efficiency, service levels and
performance. Internationally seasoned and experienced with conceptual plot plan development and
plant layouts. Experience with the layout and orientation of multi-tray and packed towers, reactors,
drums, flare stacks, and storage tanks. Proficient with the manual design and drafting for all types of
plants including plans and isometrics. Career projects include refinery, chemical, ammonia, LNG,
nuclear reprocessing, ethylene, olefins, oilrigs, and FPSO’s.
CORE COMPETENCIES
3D CAD Programs Smart Plant Design Plant Design Management System Plant Design System
Team Management Solutions Advice Cost Reduction Resource Management Leadership
Isometrics Stress Calculations Expander Compressor Communication Client Reviews
Staff Recruitment and Training Opportunity Identification Subcontractor Management
Loss Assessment EPA Regulations Field Verification & Routing
EXPERIENCES AND ACHIEVEMENTS
TECHNIP, Houston, TX. 2013 – Current
Principal Piping Designer
Sasol North America Inc. Ethane cracker unit.
Responsible for the plant layout of the Ethane Cracker unit (refrigeration section) including
tower and drum orientation, simple stress calculations and pipe support systems. Operated equipment
and associated systems for the following primary equipment, expander, compressor, demethanizer,
cold box structure, C2 splitter.
Bechtel, Houston, TX. 2010 – 2013
Design Supervisor
Chevron Wheatstone project. LNG plant (Train 1).
Supervised plant layout for six modules of the Cryo rack (Train 1) including all air coolers,
relief valves, and depressurizing systems from various sections within the train, the entire fuel gas and
defrost gas supply for the train. Included 30% to 90% client reviews.
Chevron Base oil project.
Completed and finalized the position of all equipment including pumps and exchangers.
Routed all associated piping.
Identified the plant layout and orientation of IDW and HSF reactors, trayed vessels and drums
using PDS.
Shaw Stone & Webster, Houston, TX. 2006 – 2010
Area Lead
Marathon IRD project (MSAT2 Unit). Benzene removal.
Responsible for the plant layout and orientation several multi-tray towers and drums using
PDS and Microstation for equipment orientations. Finalized positions of equipment including pumps and
exchangers. Routed all associated piping including supports associated with the splitter tower area,
splitter re-boiler heater, split cell heater, air coolers the splitter section, air coolers for the recovery
section, and the Benzene tower area. Also.
2. Victor Groves Resume, Page 2
Marathon GME project. HCU unit.
Supervised the Marathon GME project HCU unit fractionation area, heavy Naphtha guard
beds, reactor feed train one and two, North and South pipe rack, feed and distribution for reactors,
charge and feed furnaces, feed trains, and air coolers along the East and West pipe rack.
Bechtel, Houston, TX. 2005 – 2006
Senior Designer
Reliance Jamnagar Export Refinery project. Clean fuels unit.
Plant layout and orientation of several towers and drums using PDS, Microstation and
drawing manager. Routed all associated piping systems including supports associated with LCO
fractionation area, heavy Naphtha guard beds, hot oil furnaces, HP recycled gas compressor, LP
recycled gas compressor, scan fining feeds sections, and DHDS feed surge section.
t Supervised equipment orientations and the finalization of positions for pumps, exchangers,
filters, and compressors.
Shaw Stone & Webster, Houston, TX. 2005 – 2005
Senior Designer
Valero Unicracker sat gas plant.
Plant layout and orientation for various trayed vessels, drums, finalization of positions of
all equipment, pumps, exchangers for the Deethanizer area. Routed all associated piping including
supports. Extracted all isometrics for stress and checking purposes. Laid out the utility level of the
North and South pipe rack. Input all of the above into PDS. Checked the Hydrogen reciprocating
compressor and all associated equipment and piping for the Marathon DHT diesel hydrotreater.
t Familiar with piping specifications administrative and technical practices, design instructions,
plot plans, flow diagrams and interpreting vendor information.
Parsons E&C, London, England. 2004 – 2005
Senior Designer
Agip KCO overall onshore processing facility.
Plant layout and design of the LPG bullets and associated LPG transfer export pumps.
Input information into PDS. Draw and update material and stress sketches. Communicated and
interfaced with other engineering disciplines. Knowledge of industry, regulatory codes and standards.
t Conducted the layout of the receiver traps for the offshore oil and gas export pipelines and
launcher traps for the oil and gas export pipelines.
KBR, Houston, TX. 2003 – 2004
Area Lead
ExxonMobil Cerro Negro Upgrader project and the Debottleneck of Delayed Coker Complex.
Plant layout and design of equipment and piping systems.
Chevron/Texaco Benguela/Belize project compliant tower.
Responsible for plant layout and input into PDMS of all equipment, piping and pipe
supports for the North Production module.
t Responsible for six designers, client reviews and acted as the liaison with other departments for
vessel orientation and problems caused during the design and release of isometrics.
Alliance Engineering, Houston, TX. 2002 – 2003
Senior Piping Designer
Conoco Ocean Energy Magnolia tension leg platform.
Responsible for the plant layout and input into PDMS for the export gas compressors,
primary generators, oil and gas pig receivers, and associated sales gas meters. Conceptualized plans,
details and sections to accurately convey construction and fabrication requirements. Checked and back
checked computer models and piping drawings. Ensured compliance with approved design standards to
provide quality design.
t Conceptualized plans, details and sections to accurately convey fabrication requirements.
3. Victor Groves Resume, Page 3
EDUCATION
Part I City & Guilds.
Ordinary National Certificate. (With Distinctions).
Higher National Certificate – Mechanical Engineering, South Thames Technical College, London, England.
Responsibilities prior to 2002 available upon request