This is The Brushmate CAV-JET PRO. It is the world’s only powered paintbrush cleaning system that thoroughly cleans and rinses paintbrushes in 90 seconds. It makes everything about cleaning brushes, faster, easier and more efficient. This cleaning technology has been designed specifically for professional painting contractors and institutions. It saves time, money and eliminates premature brush disposal caused from improper manual cleaning.

2. PATENTED W/ OTHERS PENDING

4. WASTE-WATER HOSE
CONNECTOR
WATER SUPPLY HOSE
CONNECTOR
BRUSHLESS MOTOR
NEODYMIUM
MAGNETIC DRYING
STRIP
20V LITHIUM - ION
BATTERY
POWER SWITCH CLEANING CYCLE DRIVE VIEWING PORT

6. Competitive Advantage to Manual Cleaning
Consider the design and engineering of a professional quality paintbrush…it has a lot of densely packed bristles, which hold onto paint. You want these bristles to hold
onto paint, (even if the brush is inverted) until you are ready to apply it. No surprise then, that it isn’t easy to remove this paint when your job is done. When paint
begins to dry or “cure” in the brush, it becomes stiff and difficult to remove; exactly what you want on your painted surface, but not so good on a quality reusable
painting tool.
Manual cleaning of paintbrushes is a massive economic inefficiency in every painting firm’s daily operations. Manual cleaning is messy, tedious and time consuming.
It is generally done at the end of a long hard day when all personnel are least motivated and ready to go home. Attention to detail and efficiency have already left.
Simply put, the manual cleaning of paintbrushes is inefficient because it is imprecise and does not combine all of the essential processes simultaneously. That is why
most, if not all manual cleaning is only partially effective, resulting in new brushes needing to be purchased.
The Brushmate CAV-JET PRO is the first power tool to simultaneously combine and automate all the essential elements of a successful cleaning process, including,
the hydrodynamic power of cavitation.
Current Competing Products
Wire Brush
Steel –Toothed Comb
Spinner
To date the only method for cleaning paintbrushes is by hand. No product has ever successfully automated the process. In general, all painters clean brushes by
submerging them in water or under running water in a sink and stroke them with a wire bristle brush or steel-toothed comb and then dry them through the use of a
“spinner”.
The spinner is a hand actuated assembly. It is often used in conjunction with a bucket or other container partially filled with water. The device resembles a bicycle
pump. As the plunger is pushed back and forth, the brush (or roller) attached to the other end is rotated. The brush is dipped into the water, removed and
theoretically cleaned by spinning in an empty container. This process always causes the bristles to spread out and splay, they must then be combed back into shape
and the brush needs to be “re-formed”. This exercise basically removes moister from the brush. It cannot seriously be considered a brush cleaner.
The wire bristle brush, steel-toothed comb and spinner are all labor intensive and passive in their process; they cannot match The Brushmate CAV-JET PRO’s fast,
automated and forceful cleaning action. And they require a lot of time and are largely ineffective. (They chart below graphically illustrates the comparisons).

7. Environmental Impact
Brushes:
Eliminates “premature brush disposal”. Brushes last longer, reducing the amount of environmental waste in refuse and landfills. Simply, fewer brushes thrown away,
on a global scale.
Paint Waste Water/Water:
Instantly breaks down, dilutes and aerates paint waste, prior to its introduction into the treated waste-water system. Less demand on municipalities’ water treatment
facilities. Uses water more efficiently, therefore using less water per cleaning. Water use can be adjusted in water sensitive areas.
User Responsibility:
Directs the user/operator to dispose of paint waste responsibly. Incorporates an easy, convenient and flexible discharge hose into the treated system (sink, plumbed
drain or toilet) never in the gutter or ground soil.
Health and Safety:
The Brushmate CAV-JET PRO is a self-contained and a hands free cleaning system. Less physical contact with toxic chemicals that are present in all paints and primers.

9. EQUIPMENT ROUTINELY PURCHASED BY
CONTRACTORS AND INSTITUTIONS

10. PROFESSIONAL CONTRACTORS & INSTITUTIONS BURN THROUGH THOUSANDS OF DOLLARS
EVERY YEAR CLEANING PAINTBRUSHES BY HAND

12. COST TO CLEAN/ BRUSHMATE CJP -V- MANUAL @ $20 HR
BRUSHMATE CAV-JET PRO MANUAL CLEANING

13. BRUSHMATE CAV-JET PRO MANUAL CLEANING
COST TO CLEAN/ BRUSHMATE CJP -V- MANUAL @ $25 HR

15. CURRENT STAGE OF DEVELOPMENT

16. California Limited Liability Company
San Francisco, California/Queensland, Australia
Ted Brackett - President /CEO
seraphenterprises@bigpond.com
Mobile – (61) 431178814 (AU)
“CREATE/INNOVATE & DESIGN SO DYNAMICALLY...THAT PEOPLE THINK ALIENS MADE IT”
PRODUCT DEMO VIDEO - www.youtube.com/watch?v=0JLDjSskxgo&t=27s

17. LAY DOWN YOUR NEW COAT OF PROFIT