StressNg.pptx
•Download as PPTX, PDF•
0 likes•12 views
Stress-ng is a tool that generates CPU, memory, network, and storage load but does not expose remote control or configuration. It allows running predefined loads for a set time but not time-varying loads. The document proposes adding time-varying and load-varying capabilities to Stress-ng by implementing time and load variation profiles, containerizing Stress-ng, and monitoring performance with Collectd to detect differences from the configuration.
Report
Share
Report
Share
Recommended
Linux Performance Tools
This document provides an overview of performance analysis tools for Linux systems. It describes Brendan Gregg's background and work analyzing performance at Netflix. It then discusses different types of tools, including observability tools to monitor systems, benchmarking tools to test performance, and tuning tools to optimize systems. A number of command line monitoring tools are outlined, such as vmstat, iostat, mpstat, and netstat, as well as more advanced tools like strace and tcpdump.
Linux Performance Tools 2014
LinuxCon Europe, 2014. Video: https://www.youtube.com/watch?v=SN7Z0eCn0VY . There are many performance tools nowadays for Linux, but how do they all fit together, and when do we use them? This talk summarizes the three types of performance tools: observability, benchmarking, and tuning, providing a tour of what exists and why they exist. Advanced tools including those based on tracepoints, kprobes, and uprobes are also included: perf_events, ktap, SystemTap, LTTng, and sysdig. You'll gain a good understanding of the performance tools landscape, knowing what to reach for to get the most out of your systems.
Velocity 2015 linux perf tools
Video: https://www.youtube.com/watch?v=FJW8nGV4jxY and https://www.youtube.com/watch?v=zrr2nUln9Kk . Tutorial slides for O'Reilly Velocity SC 2015, by Brendan Gregg.
There are many performance tools nowadays for Linux, but how do they all fit together, and when do we use them? This tutorial explains methodologies for using these tools, and provides a tour of four tool types: observability, benchmarking, tuning, and static tuning. Many tools will be discussed, including top, iostat, tcpdump, sar, perf_events, ftrace, SystemTap, sysdig, and others, as well observability frameworks in the Linux kernel: PMCs, tracepoints, kprobes, and uprobes.
This tutorial is updated and extended on an earlier talk that summarizes the Linux performance tool landscape. The value of this tutorial is not just learning that these tools exist and what they do, but hearing when and how they are used by a performance engineer to solve real world problems — important context that is typically not included in the standard documentation.
Strategic autovacuum
The document discusses strategic autovacuum configuration and monitoring in PostgreSQL. It begins by explaining the ACID properties and how MVCC and transactions work. It then discusses how to monitor workloads for heavily updated tables, adjust per-table autovacuum thresholds to prioritize those tables, monitor autovacuum behavior over time using logs and queries, and tune the autovacuum throttle settings based on that monitoring to optimize autovacuum performance. The key steps are to start with defaults, monitor workload changes, adjust settings for busy tables, continue monitoring, and refine settings as needed.
JavaOne 2010: Top 10 Causes for Java Issues in Production and What to Do When...
Top 10 Causes for Java Issues in Production and What to Do When Things Go Wrong
JavaOne 2010.
Abstract: It's Friday evening and you hear the first rumble . . . one java node has become slightly unresponsive. You lookup the process, get a thread dump, and for good measure restart it at 8 p.m. Saturday afternoon is when you realize that other nodes have caught the flu and you get the ugly call from the customer. In a matter of hours, you're on that conference bridge with support groups of different packages and Java vendors and one of your uberarchitects. Yes, production instances are up and down, and restarting like there's no tomorrow. Here's an accumulated compendium of the op 10 things that can cause Java production heartburn and what to do when your Java production is on fire. And yes, please have your tools belt on.
Speaker(s):
Cliff Click, Azul Systems, Distinguished Engineer
SriSatish Ambati, Azul Systems, Performance Engineer
Process scheduling
Introduction to various Linux kernel CPU schedulers, wait queue, thread creation and kernel preemption.
Broken Performance Tools
Video and slides synchronized, mp3 and slide download available at URL http://bit.ly/1N4GN6z.
Brendan Gregg focuses on broken tools and metrics instead of the working ones. Metrics can be misleading, and counters can be counter-intuitive. Gregg includes advice and methodologies for verifying new performance tools, understanding how they work, and using them successfully. Filmed at qconsf.com.
Brendan Gregg is a senior performance architect at Netflix, where he does large scale computer performance design, analysis, and tuning. He is the author of multiple technical books including Systems Performance published by Prentice Hall, and received the USENIX LISA Award for Outstanding Achievement in System Administration.
Building a Gateway Server
A gateway server is a server through which the computers in a LAN access the Internet. This is
usually done through NAT. It should also provide firewall protection for the LAN and it can also serve
as a DNS and DHCPD server for the LAN. Some years ago I have been involved in a project for building gateway servers like this, using
slackware on old PCs. In this article I will try to explain the things that I have done on this project and
how I did them.
Recommended
Linux Performance Tools
This document provides an overview of performance analysis tools for Linux systems. It describes Brendan Gregg's background and work analyzing performance at Netflix. It then discusses different types of tools, including observability tools to monitor systems, benchmarking tools to test performance, and tuning tools to optimize systems. A number of command line monitoring tools are outlined, such as vmstat, iostat, mpstat, and netstat, as well as more advanced tools like strace and tcpdump.
Linux Performance Tools 2014
LinuxCon Europe, 2014. Video: https://www.youtube.com/watch?v=SN7Z0eCn0VY . There are many performance tools nowadays for Linux, but how do they all fit together, and when do we use them? This talk summarizes the three types of performance tools: observability, benchmarking, and tuning, providing a tour of what exists and why they exist. Advanced tools including those based on tracepoints, kprobes, and uprobes are also included: perf_events, ktap, SystemTap, LTTng, and sysdig. You'll gain a good understanding of the performance tools landscape, knowing what to reach for to get the most out of your systems.
Velocity 2015 linux perf tools
Video: https://www.youtube.com/watch?v=FJW8nGV4jxY and https://www.youtube.com/watch?v=zrr2nUln9Kk . Tutorial slides for O'Reilly Velocity SC 2015, by Brendan Gregg.
There are many performance tools nowadays for Linux, but how do they all fit together, and when do we use them? This tutorial explains methodologies for using these tools, and provides a tour of four tool types: observability, benchmarking, tuning, and static tuning. Many tools will be discussed, including top, iostat, tcpdump, sar, perf_events, ftrace, SystemTap, sysdig, and others, as well observability frameworks in the Linux kernel: PMCs, tracepoints, kprobes, and uprobes.
This tutorial is updated and extended on an earlier talk that summarizes the Linux performance tool landscape. The value of this tutorial is not just learning that these tools exist and what they do, but hearing when and how they are used by a performance engineer to solve real world problems — important context that is typically not included in the standard documentation.
Strategic autovacuum
The document discusses strategic autovacuum configuration and monitoring in PostgreSQL. It begins by explaining the ACID properties and how MVCC and transactions work. It then discusses how to monitor workloads for heavily updated tables, adjust per-table autovacuum thresholds to prioritize those tables, monitor autovacuum behavior over time using logs and queries, and tune the autovacuum throttle settings based on that monitoring to optimize autovacuum performance. The key steps are to start with defaults, monitor workload changes, adjust settings for busy tables, continue monitoring, and refine settings as needed.
JavaOne 2010: Top 10 Causes for Java Issues in Production and What to Do When...
Top 10 Causes for Java Issues in Production and What to Do When Things Go Wrong
JavaOne 2010.
Abstract: It's Friday evening and you hear the first rumble . . . one java node has become slightly unresponsive. You lookup the process, get a thread dump, and for good measure restart it at 8 p.m. Saturday afternoon is when you realize that other nodes have caught the flu and you get the ugly call from the customer. In a matter of hours, you're on that conference bridge with support groups of different packages and Java vendors and one of your uberarchitects. Yes, production instances are up and down, and restarting like there's no tomorrow. Here's an accumulated compendium of the op 10 things that can cause Java production heartburn and what to do when your Java production is on fire. And yes, please have your tools belt on.
Speaker(s):
Cliff Click, Azul Systems, Distinguished Engineer
SriSatish Ambati, Azul Systems, Performance Engineer
Process scheduling
Introduction to various Linux kernel CPU schedulers, wait queue, thread creation and kernel preemption.
Broken Performance Tools
Video and slides synchronized, mp3 and slide download available at URL http://bit.ly/1N4GN6z.
Brendan Gregg focuses on broken tools and metrics instead of the working ones. Metrics can be misleading, and counters can be counter-intuitive. Gregg includes advice and methodologies for verifying new performance tools, understanding how they work, and using them successfully. Filmed at qconsf.com.
Brendan Gregg is a senior performance architect at Netflix, where he does large scale computer performance design, analysis, and tuning. He is the author of multiple technical books including Systems Performance published by Prentice Hall, and received the USENIX LISA Award for Outstanding Achievement in System Administration.
Building a Gateway Server
A gateway server is a server through which the computers in a LAN access the Internet. This is
usually done through NAT. It should also provide firewall protection for the LAN and it can also serve
as a DNS and DHCPD server for the LAN. Some years ago I have been involved in a project for building gateway servers like this, using
slackware on old PCs. In this article I will try to explain the things that I have done on this project and
how I did them.
MeetBSD2014 Performance Analysis
MeetBSDCA 2014 Performance Analysis for BSD, by Brendan Gregg. A tour of five relevant topics: observability tools, methodologies, benchmarking, profiling, and tracing. Tools summarized include pmcstat and DTrace.
HPC Examples
The document provides instructions for interacting with and submitting jobs to a high performance computing (HPC) system. It begins by demonstrating how to log in to the system using SSH and describes the information displayed upon login. It then shows how to create and edit files using nano, run code interactively on a node using idev, and submit batch jobs using SLURM. The user creates Python scripts to print "Hello World" sequentially and in parallel, runs them interactively, and submits the parallel version as a batch job to demonstrate these workflows. Monitoring and management commands like squeue and scancel are also introduced.
LSA2 - 02 Control Groups
This document summarizes Linux control groups (cgroups) and their capabilities for limiting and accounting for CPU, memory, block I/O, networking, and freezing processes. It describes the general cgroup structure and available controllers for CPU, CPU accounting, CPU scheduling, memory limits and accounting, block I/O statistics and limiting, network classification and prioritization, freezing processes, and checkpoint/restore with CRIU. Examples are given for configuring CPU and memory limits on cgroups.
SiteGround Tech TeamBuilding
The document describes Linux containerization and virtualization technologies including containers, control groups (cgroups), namespaces, and backups. It discusses:
1) How cgroups isolate and limit system resources for containers through mechanisms like cpuset, cpuacct, cpu, memory, blkio, and freezer.
2) How namespaces isolate processes by ID, mounting, networking, IPC, and other resources to separate environments for containers.
3) The new backup system which uses thin provisioning and snapshotting to efficiently backup container environments to backup servers and restore individual accounts or full servers as needed.
Optimizing Linux Servers
This document discusses optimizing Linux servers. It covers monitoring server performance using tools like top, vmstat and iostat to identify bottlenecks. It also discusses optimizing hardware, software, databases, disk I/O, memory, and network performance. The document provides tips for tuning Linux kernels, Apache, MySQL, OpenLDAP and other software. It emphasizes starting with monitoring to identify issues, making one change at a time, and using benchmark tools to test performance.
Process Scheduler and Balancer in Linux Kernel
The document discusses process scheduling in the Linux kernel. It begins with an introduction to schedulers and outlines Linux scheduler history, including round-robin, O(N), O(1), and Completely Fair schedulers. It then provides more details on the Completely Fair Scheduler's use of virtual runtime to determine process execution order and maintain fairness. The document also briefly discusses the real-time scheduler and key data structures used for scheduling like task_struct and sched_domain. It concludes with an overview of the CFS load balancer's hierarchical design and methods used to balance tasks among CPU cores.
OS scheduling and The anatomy of a context switch
A general overview and some in depth about how operation systems schedule tasks and how much does it really cost?
CPN302 your-linux-ami-optimization-and-performance
This document discusses optimizing Linux AMIs for performance at Netflix. It begins by providing background on Netflix and explaining why tuning the AMI is important given Netflix runs tens of thousands of instances globally with varying workloads. It then outlines some of the key tools and techniques used to bake performance optimizations into the base AMI, including kernel tuning to improve efficiency and identify ideal instance types. Specific examples of CFS scheduler, page cache, block layer, memory allocation, and network stack tuning are also covered. The document concludes by discussing future tuning plans and an appendix on profiling tools like perf and SystemTap.
The origin: Init (compact version)
The document discusses different methods for managing services and daemons at system startup. It begins by explaining that traditional init systems launched processes in a specific order, but that event-driven systems are now more common. It then provides examples of init systems including launchd, upstart, and systemd. Launchd configurations in macOS are defined through XML property list files that can start daemons, sockets, periodic jobs, and monitor directories for changes.
Linux Systems Performance 2016
Talk for PerconaLive 2016 by Brendan Gregg. Video: https://www.youtube.com/watch?v=CbmEDXq7es0 . "Systems performance provides a different perspective for analysis and tuning, and can help you find performance wins for your databases, applications, and the kernel. However, most of us are not performance or kernel engineers, and have limited time to study this topic. This talk summarizes six important areas of Linux systems performance in 50 minutes: observability tools, methodologies, benchmarking, profiling, tracing, and tuning. Included are recipes for Linux performance analysis and tuning (using vmstat, mpstat, iostat, etc), overviews of complex areas including profiling (perf_events), static tracing (tracepoints), and dynamic tracing (kprobes, uprobes), and much advice about what is and isn't important to learn. This talk is aimed at everyone: DBAs, developers, operations, etc, and in any environment running Linux, bare-metal or the cloud."
Nine Circles of Inferno or Explaining the PostgreSQL Vacuum
The document describes the nine circles of the PostgreSQL vacuum process. Circle I discusses the postmaster process, which initializes shared memory and launches the autovacuum launcher and worker processes. Circle II focuses on the autovacuum launcher, which manages worker processes and determines when to initiate vacuuming for different databases. Circle III returns to the postmaster process and how it launches autovacuum workers. Circle IV discusses what occurs within an autovacuum worker process after it is launched, including initializing, signaling the launcher, scanning relations, and updating databases. Circle V delves into processing a single database by an autovacuum worker.
Colin-Ian-King-Mentorship-Stress-ng.pdf
Stress-ng is a tool for stress testing and crashing kernels by exercising memory, CPU, cache, devices, and file systems. It was originally developed to cause thermal overruns on laptops by making CPUs and memory run hot. It now contains over 280 stress tests ("stressors") that put pressure on system resources in order to find bugs and test hardware and software limits. Some examples of stressors include CPU, memory, I/O, storage, networking, and virtual memory stress tests.
Software Profiling: Java Performance, Profiling and Flamegraphs
Guest lecture at University of Colombo School of Computing on 30th May 2018
Covers following topics:
Software Profiling
Measuring Performance
Java Garbage Collection
Sampling vs Instrumentation
Java Profilers. Java Flight Recorder
Java Just-in-Time (JIT) compilation
Flame Graphs
Linux Profiling
Kafka to the Maxka - (Kafka Performance Tuning)
Kafka is becoming an ever more popular choice for users to help enable fast data and Streaming. Kafka provides a wide landscape of configuration to allow you to tweak its performance profile. Understanding the internals of Kafka is critical for picking your ideal configuration. Depending on your use case and data needs, different settings will perform very differently. Lets walk through performance essentials of Kafka. Let's talk about how your Consumer configuration, can speed up or slow down the flow of messages to Brokers. Lets talk about message keys, their implications and their impact on partition performance. Lets talk about how to figure out how many partitions and how many Brokers you should have. Let's discuss consumers and what effects their performance. How do you combine all of these choices and develop the best strategy moving forward? How do you test performance of Kafka? I will attempt a live demo with the help of Zeppelin to show in real time how to tune for performance.
Strategic Autovacuum
[Auto]Vacuum is a complex topic in PostgreSQL. All too often, we ignore tuning it and end up with big problems. Let's talk about how to be tune [Auto]Vacuum strategically.
Ch1 introduction os
The document discusses the evolution of operating systems from simple batch systems to modern systems. Early batch systems used control cards to run jobs sequentially while multiprogramming systems allowed multiple jobs to reside in memory simultaneously. Time-sharing systems provided interactive use through rapid switching between programs. Modern systems include personal computers, parallel and distributed systems, and specialized real-time systems.
jvm goes to big data
invited netflix talk: JVM issues in the age of scale! We take an under the hood look at java locking, memory model, overheads, serialization, uuid, gc tuning, CMS, ParallelGC, java.
CIS3110 Winter 2016CIS3110 (Operating Systems) Assig.docx
CIS*3110 Winter 2016
CIS*3110 (Operating Systems)
Assignment 2: CPU Simulation
Due Date: Sunday, March 6, 2016 at 23:59.
Requirements and Specifications
Objective
The goal of this assignment is to develop a CPU scheduling algorithm that will complete the
execution of a group of multi-threaded processes in an OS that understands threads (kernel
threads). Since a real implementation of your scheduling algorithm is not feasible, you will
implement a simulation of your CPU scheduling algorithm. Each process will have 1-50 threads;
each of the threads has its own CPU and I/O requirements. The simulated scheduling policy is on
the thread level. While your simulation will have access to all the details of the processes that need
to execute, your CPU scheduling algorithm CANNOT take advantage of future knowledge.
Specification
Given a set of processes to execute with CPU and I/O requirements, your CPU simulator will
simulate the execution of the threads based on your developed CPU scheduling policies (FCFS
and RR). Your simulation will collect the following statistics:
• the total time required to execute all the threads in all the processes
• the CPU utilization (NOT the CPU efficiency)
• the average turnaround time for all the processes
• the service time (or CPU time), I/O time and turnaround time for each individual thread
Your simulation structure should be a next event simulation. The next event approach to simulation
is the most common simulation model. At any given time, the simulation is in a single state. The
simulation state can only change at event times, where an event is defined as an occurrence that
may change the state of the system.
Events in this CPU simulation are the following:
• thread arrival
• the transition of a thread state (e.g. when an interrupt occurs due to a time slice, the thread
moves from running state to ready state).
Each event occurs at a specified time. Since the simulation state only changes at an event, the
clock can be advanced to the next most recently scheduled event (the meaning of next event
simulation model).
CIS*3110 Winter 2016
Events are scheduled via an event queue. The event queue is a sorted queue which contains
"future" events; the queue is sorted by the time of these "future" events. The event queue is
initialized to contain the arrival of all threads. The main loop of the simulation consists of processing
the next event, perhaps adding more future events in the queue as a result, advancing the clock,
and so on until all threads have terminated.
Simulation Execution
Your simulation program will be invoked as:
simcpu [-d] [-v] [-r quantum] < input_file
where
• -d stands for detailed information
• -v stands for verbose mode
• –r indicates Round Robin scheduling with the given quantum (an integer).
You can assume only these flags will be used with your program, and that they will appear in the
order listed. The output for the de ...
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Your AMI is one of the core foundations for running applications and services effectively on Amazon EC2. In this session, you'll learn how to optimize your AMI, including how you can measure and diagnose system performance and tune parameters for improved CPU and network performance. We'll cover application-specific examples from Netflix on how optimized AMIs can lead to improved performance.
Immutable infrastructure with Docker and containers (GlueCon 2015)
"Never upgrade a server again. Never update your code. Instead, create new servers, and throw away the old ones!"
That's the idea of immutable servers, or immutable infrastructure. This makes many things easier: rollbacks (you can always bring back the old servers), A/B testing (put old and new servers side by side), security (use the latest and safest base system at each deploy), and more.
However, throwing in a bunch of new servers at each one-line CSS change is going to be complicated, not to mention costly.
Containers to the rescue! Creating container "golden images" is easy, fast, dare I say painless. Replacing your old containers with new ones is also easy to do; much easier than virtual machines, let alone physical ones.
In this talk, we'll quickly recap the pros (and cons) of immutable servers; then explain how to implement that pattern with containers. We will use Docker as an example, but the technique can easily be adapted to Rocket or even plain LXC containers.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
More Related Content
Similar to StressNg.pptx
MeetBSD2014 Performance Analysis
MeetBSDCA 2014 Performance Analysis for BSD, by Brendan Gregg. A tour of five relevant topics: observability tools, methodologies, benchmarking, profiling, and tracing. Tools summarized include pmcstat and DTrace.
HPC Examples
The document provides instructions for interacting with and submitting jobs to a high performance computing (HPC) system. It begins by demonstrating how to log in to the system using SSH and describes the information displayed upon login. It then shows how to create and edit files using nano, run code interactively on a node using idev, and submit batch jobs using SLURM. The user creates Python scripts to print "Hello World" sequentially and in parallel, runs them interactively, and submits the parallel version as a batch job to demonstrate these workflows. Monitoring and management commands like squeue and scancel are also introduced.
LSA2 - 02 Control Groups
This document summarizes Linux control groups (cgroups) and their capabilities for limiting and accounting for CPU, memory, block I/O, networking, and freezing processes. It describes the general cgroup structure and available controllers for CPU, CPU accounting, CPU scheduling, memory limits and accounting, block I/O statistics and limiting, network classification and prioritization, freezing processes, and checkpoint/restore with CRIU. Examples are given for configuring CPU and memory limits on cgroups.
SiteGround Tech TeamBuilding
The document describes Linux containerization and virtualization technologies including containers, control groups (cgroups), namespaces, and backups. It discusses:
1) How cgroups isolate and limit system resources for containers through mechanisms like cpuset, cpuacct, cpu, memory, blkio, and freezer.
2) How namespaces isolate processes by ID, mounting, networking, IPC, and other resources to separate environments for containers.
3) The new backup system which uses thin provisioning and snapshotting to efficiently backup container environments to backup servers and restore individual accounts or full servers as needed.
Optimizing Linux Servers
This document discusses optimizing Linux servers. It covers monitoring server performance using tools like top, vmstat and iostat to identify bottlenecks. It also discusses optimizing hardware, software, databases, disk I/O, memory, and network performance. The document provides tips for tuning Linux kernels, Apache, MySQL, OpenLDAP and other software. It emphasizes starting with monitoring to identify issues, making one change at a time, and using benchmark tools to test performance.
Process Scheduler and Balancer in Linux Kernel
The document discusses process scheduling in the Linux kernel. It begins with an introduction to schedulers and outlines Linux scheduler history, including round-robin, O(N), O(1), and Completely Fair schedulers. It then provides more details on the Completely Fair Scheduler's use of virtual runtime to determine process execution order and maintain fairness. The document also briefly discusses the real-time scheduler and key data structures used for scheduling like task_struct and sched_domain. It concludes with an overview of the CFS load balancer's hierarchical design and methods used to balance tasks among CPU cores.
OS scheduling and The anatomy of a context switch
A general overview and some in depth about how operation systems schedule tasks and how much does it really cost?
CPN302 your-linux-ami-optimization-and-performance
This document discusses optimizing Linux AMIs for performance at Netflix. It begins by providing background on Netflix and explaining why tuning the AMI is important given Netflix runs tens of thousands of instances globally with varying workloads. It then outlines some of the key tools and techniques used to bake performance optimizations into the base AMI, including kernel tuning to improve efficiency and identify ideal instance types. Specific examples of CFS scheduler, page cache, block layer, memory allocation, and network stack tuning are also covered. The document concludes by discussing future tuning plans and an appendix on profiling tools like perf and SystemTap.
The origin: Init (compact version)
The document discusses different methods for managing services and daemons at system startup. It begins by explaining that traditional init systems launched processes in a specific order, but that event-driven systems are now more common. It then provides examples of init systems including launchd, upstart, and systemd. Launchd configurations in macOS are defined through XML property list files that can start daemons, sockets, periodic jobs, and monitor directories for changes.
Linux Systems Performance 2016
Talk for PerconaLive 2016 by Brendan Gregg. Video: https://www.youtube.com/watch?v=CbmEDXq7es0 . "Systems performance provides a different perspective for analysis and tuning, and can help you find performance wins for your databases, applications, and the kernel. However, most of us are not performance or kernel engineers, and have limited time to study this topic. This talk summarizes six important areas of Linux systems performance in 50 minutes: observability tools, methodologies, benchmarking, profiling, tracing, and tuning. Included are recipes for Linux performance analysis and tuning (using vmstat, mpstat, iostat, etc), overviews of complex areas including profiling (perf_events), static tracing (tracepoints), and dynamic tracing (kprobes, uprobes), and much advice about what is and isn't important to learn. This talk is aimed at everyone: DBAs, developers, operations, etc, and in any environment running Linux, bare-metal or the cloud."
Nine Circles of Inferno or Explaining the PostgreSQL Vacuum
The document describes the nine circles of the PostgreSQL vacuum process. Circle I discusses the postmaster process, which initializes shared memory and launches the autovacuum launcher and worker processes. Circle II focuses on the autovacuum launcher, which manages worker processes and determines when to initiate vacuuming for different databases. Circle III returns to the postmaster process and how it launches autovacuum workers. Circle IV discusses what occurs within an autovacuum worker process after it is launched, including initializing, signaling the launcher, scanning relations, and updating databases. Circle V delves into processing a single database by an autovacuum worker.
Colin-Ian-King-Mentorship-Stress-ng.pdf
Stress-ng is a tool for stress testing and crashing kernels by exercising memory, CPU, cache, devices, and file systems. It was originally developed to cause thermal overruns on laptops by making CPUs and memory run hot. It now contains over 280 stress tests ("stressors") that put pressure on system resources in order to find bugs and test hardware and software limits. Some examples of stressors include CPU, memory, I/O, storage, networking, and virtual memory stress tests.
Software Profiling: Java Performance, Profiling and Flamegraphs
Guest lecture at University of Colombo School of Computing on 30th May 2018
Covers following topics:
Software Profiling
Measuring Performance
Java Garbage Collection
Sampling vs Instrumentation
Java Profilers. Java Flight Recorder
Java Just-in-Time (JIT) compilation
Flame Graphs
Linux Profiling
Kafka to the Maxka - (Kafka Performance Tuning)
Kafka is becoming an ever more popular choice for users to help enable fast data and Streaming. Kafka provides a wide landscape of configuration to allow you to tweak its performance profile. Understanding the internals of Kafka is critical for picking your ideal configuration. Depending on your use case and data needs, different settings will perform very differently. Lets walk through performance essentials of Kafka. Let's talk about how your Consumer configuration, can speed up or slow down the flow of messages to Brokers. Lets talk about message keys, their implications and their impact on partition performance. Lets talk about how to figure out how many partitions and how many Brokers you should have. Let's discuss consumers and what effects their performance. How do you combine all of these choices and develop the best strategy moving forward? How do you test performance of Kafka? I will attempt a live demo with the help of Zeppelin to show in real time how to tune for performance.
Strategic Autovacuum
[Auto]Vacuum is a complex topic in PostgreSQL. All too often, we ignore tuning it and end up with big problems. Let's talk about how to be tune [Auto]Vacuum strategically.
Ch1 introduction os
The document discusses the evolution of operating systems from simple batch systems to modern systems. Early batch systems used control cards to run jobs sequentially while multiprogramming systems allowed multiple jobs to reside in memory simultaneously. Time-sharing systems provided interactive use through rapid switching between programs. Modern systems include personal computers, parallel and distributed systems, and specialized real-time systems.
jvm goes to big data
invited netflix talk: JVM issues in the age of scale! We take an under the hood look at java locking, memory model, overheads, serialization, uuid, gc tuning, CMS, ParallelGC, java.
CIS3110 Winter 2016CIS3110 (Operating Systems) Assig.docx
CIS*3110 Winter 2016
CIS*3110 (Operating Systems)
Assignment 2: CPU Simulation
Due Date: Sunday, March 6, 2016 at 23:59.
Requirements and Specifications
Objective
The goal of this assignment is to develop a CPU scheduling algorithm that will complete the
execution of a group of multi-threaded processes in an OS that understands threads (kernel
threads). Since a real implementation of your scheduling algorithm is not feasible, you will
implement a simulation of your CPU scheduling algorithm. Each process will have 1-50 threads;
each of the threads has its own CPU and I/O requirements. The simulated scheduling policy is on
the thread level. While your simulation will have access to all the details of the processes that need
to execute, your CPU scheduling algorithm CANNOT take advantage of future knowledge.
Specification
Given a set of processes to execute with CPU and I/O requirements, your CPU simulator will
simulate the execution of the threads based on your developed CPU scheduling policies (FCFS
and RR). Your simulation will collect the following statistics:
• the total time required to execute all the threads in all the processes
• the CPU utilization (NOT the CPU efficiency)
• the average turnaround time for all the processes
• the service time (or CPU time), I/O time and turnaround time for each individual thread
Your simulation structure should be a next event simulation. The next event approach to simulation
is the most common simulation model. At any given time, the simulation is in a single state. The
simulation state can only change at event times, where an event is defined as an occurrence that
may change the state of the system.
Events in this CPU simulation are the following:
• thread arrival
• the transition of a thread state (e.g. when an interrupt occurs due to a time slice, the thread
moves from running state to ready state).
Each event occurs at a specified time. Since the simulation state only changes at an event, the
clock can be advanced to the next most recently scheduled event (the meaning of next event
simulation model).
CIS*3110 Winter 2016
Events are scheduled via an event queue. The event queue is a sorted queue which contains
"future" events; the queue is sorted by the time of these "future" events. The event queue is
initialized to contain the arrival of all threads. The main loop of the simulation consists of processing
the next event, perhaps adding more future events in the queue as a result, advancing the clock,
and so on until all threads have terminated.
Simulation Execution
Your simulation program will be invoked as:
simcpu [-d] [-v] [-r quantum] < input_file
where
• -d stands for detailed information
• -v stands for verbose mode
• –r indicates Round Robin scheduling with the given quantum (an integer).
You can assume only these flags will be used with your program, and that they will appear in the
order listed. The output for the de ...
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Your AMI is one of the core foundations for running applications and services effectively on Amazon EC2. In this session, you'll learn how to optimize your AMI, including how you can measure and diagnose system performance and tune parameters for improved CPU and network performance. We'll cover application-specific examples from Netflix on how optimized AMIs can lead to improved performance.
Immutable infrastructure with Docker and containers (GlueCon 2015)
"Never upgrade a server again. Never update your code. Instead, create new servers, and throw away the old ones!"
That's the idea of immutable servers, or immutable infrastructure. This makes many things easier: rollbacks (you can always bring back the old servers), A/B testing (put old and new servers side by side), security (use the latest and safest base system at each deploy), and more.
However, throwing in a bunch of new servers at each one-line CSS change is going to be complicated, not to mention costly.
Containers to the rescue! Creating container "golden images" is easy, fast, dare I say painless. Replacing your old containers with new ones is also easy to do; much easier than virtual machines, let alone physical ones.
In this talk, we'll quickly recap the pros (and cons) of immutable servers; then explain how to implement that pattern with containers. We will use Docker as an example, but the technique can easily be adapted to Rocket or even plain LXC containers.
Similar to StressNg.pptx (20)
CPN302 your-linux-ami-optimization-and-performance
CPN302 your-linux-ami-optimization-and-performance
Nine Circles of Inferno or Explaining the PostgreSQL Vacuum
Nine Circles of Inferno or Explaining the PostgreSQL Vacuum
Software Profiling: Java Performance, Profiling and Flamegraphs
Software Profiling: Java Performance, Profiling and Flamegraphs
CIS3110 Winter 2016CIS3110 (Operating Systems) Assig.docx
CIS3110 Winter 2016CIS3110 (Operating Systems) Assig.docx
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Your Linux AMI: Optimization and Performance (CPN302) | AWS re:Invent 2013
Immutable infrastructure with Docker and containers (GlueCon 2015)
Immutable infrastructure with Docker and containers (GlueCon 2015)
Recently uploaded
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Assistant Engineer (Chemical) Interview Questions.pdf
These are interview questions for the post of Assistant Engineer (Chemical)
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Height and depth gauge linear metrology.pdf
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Assistant Engineer (Chemical) Interview Questions.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques.ppt
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
StressNg.pptx
- 1. Load-Generator • stress-ng • https://github.com/ColinIanKing/stress-ng • cli-command. • It generates load – cpu, memory, network, storage. • Chaos tools also uses stress-ng: litmus, pumba, …. • It does not expose any remote control and configuration. • It doesn’t open a socket/rest-interface and behave accordingly. • Ex: I can run stress-ng and say run 60 secs, and consume 80% of CPU, and you do this by performing so and so operations. • I cannot do: Time-Varying this. First 5 secs you consume 20%, next 10 secs you consume 50, and next 40 secs you consume 80%.. And repeat this..
- 2. Stress-ng Time-Varying, Load-Varying – Stress-ng time variations ?? Load-Variation ??? Select pre-defined set of time/load variation Compute-Intensive Memory Intensive Network Intensive Storage Intensive Aggressive (combination of al --------------------- Firewall Media-Gateway --------------------- Rest Conf-File POST: URL: ip/v1/predef/ci POST: URL: p/v1/custom DATA: {Configuration/URL} start End
- 3. Option-1 (timeseries) • T1: 10 • L1: C: M: N: S: (Memory and storage: Read-Rate and Write Rate, Read-Size and Write Size) • T2: • L2: • T3: • TLs = List of Integers. • LVs = List of Dictionaries • Total duration = Integer/INF • INT: Sum of all TLS is less the total-duration, cycle it.. • INF: go forever.
- 4. Option-2 (step) • Start-load • Time-Step: 2 secs • Load-Step: C, N, S, M… util=5, read_rate=5, write_rate=5 • Start with start-load, and for every time-step increase the load by load-step
- 5. • Step1: Implement the time-and-load variation (previous 4 slides). • Step2: Containerize it. • Step3: Create a virtual machine with it. • We will have to add collectd tool too.
- 6. Stress-ng … configuration Actual Difference Problem(b) Update the configuration runtime Configura tion - Tree Register for any change in configuration Update workers (a3) (a2) (a1) Problem(a) (b1) Run with --vmstat --iostat (parse output (b2)) (compare with the configuration (b3))