Presentation EC "Vostok"

2. First success
Engineering company LLC "Vostok" – is a young company. We work more
than four years, but, despite of this, we have already become one of the most
advanced engineering companies in Ukraine and are participants in international
projects in the field of locomotive constructing. In September 2014 the company
was an exhibitor of the international railway exhibition InnoTrans in Berlin.
We invite you to visit our stand in September 2016 Hall A Stand № 226
2

3. Brief description of the company
3
General description Answer Note
Amount of
workers/engineers
15/12
Perhaps the staff increase of
engineers for more than 30 people
Engaging of freelancers depending on the amount of work
Organizational structure Management unit (3) Building
Design Division (9), supporting
services (3)
Services categories • Activities in the field of rail
transport engineering technical
consultations designer
accompaniment of prototypes
production samples and their
testing
• Reengineering
• Development of projects for
modernization of the rolling
stock
 complete design engineering package (3D models/2D drawings)
considering standards of ESKD, ISO, EN, DIN.
 execution of payments:
 Static linear;
 Static nonlinear;
 Dynamic;
 Thermal.
 Development of electronic products prototypes
 Creation of electronic archives of the design documentation
 Development of training and repair materials in a vision of electronic instructions and
illustrated catalogs of parts and assemblies
 Expertise of project and construction documentation in compliance with standards of ESKD
and norms of Ukraine and CIS
 Development of the project at the stage of thumbnail documents
 Work with technical documentation on three languages(rus/eng/deu)

4. Production
and projects:
1. Employees of the company have the experience from 10 to 30 years for
the development, putting on the production, testing and commissioning
of the rolling stock exploitation which produced at the company PJSC
"Luganskteplovoz" to 2012 :
Electro trains of alternating and direct current;
Diesel trains, with the introduction of asynchronous drive of Ukrainian
production;
Electric locomotives of AC and DC power adapted to the requirements and
standards of Ukraine in the area1520.
2. 2012-2013 - participation in the project of modernization of electric
career locomotive OPE1AM and organization of electronic archive of
design documentation for the Government Enterprise "Electric
Locomotive" in Dnepropetrovsk. (The head of works, Chief Designer Andrei
Yaroslavovich Grivnak)
Brief description of the company
4

5. Production
and projects:
3.2013–2016-participation in the existing project of
companies Bombardier Transportation GmbH (Steffen Gey, Head of Project
Portfolio 5, Project Management Locomotives REGION CENTRAL / EASTERN EUROPE
AND CIS (CEE) steffen.gey@ch.transport.bombardier.com )
and Voith Engineering Services GmbH – locomotive “Knyaz Vladimir“
Russian federation (carries out certification testing) - only a verbal
reference.(Alexander Wolf, Project engineer / Alexander.Wolf@Voith.com )
Brief description of the company
5

6. Production
and projects:
4. 2015 – 2016 work in the field of Systems Engineering (SysML) together with DB
Systemtechnik GmbH (Toralf Noack Engineering V-Lok (Leiter T.TVI47), Telephone +49 355 44-
3798 / Mobile telephone: +49 160 97434662 / toralf.noack@deutschebahn.com)
– formation knowledge base of locomotives through the development of the
structural, functional, service models of locomotives which exploited in Germany -
only a verbal reference.
5. 2016 – CZ LOKO, Czech Republic, the production and adaptation of European
drawings to the track standards 1520 (GOST), preparation of documentation for
certification of diesel locomotive in the CIS market. (Alexandr Volf, DiS
Deputy Commercial Director for Eastern Europe| E-mail: alexandr.volf@czloko.cz |
www.czloko.cz )
We carry out work in interests of our customers and are not able to disclose details
of the projects
Brief description of the company
6

7. Brief description of the company
The tools, Office,
telecommunicati
ons and the
Internet
Working stations by the
type:
DELL PRECISION T1650
DELL PRECISION T3600
Server DELL Power Edge T420
Tower 8xHDD 3.5:
H87/ i7-4770/ 24GB/ 128Gb/
1Tb/ Quadro K4000
Laptops:
DELL Vostro 3560.
Large-format plotter: Epson
SureColor SC-T7000 44"
Large-format scanner: OCE
CS4236
And other office gear.
 Windows 7 Professional
 Microsoft Word, Excel
 Program products of america company PTC,
versions Creo 2.0 и 3.0 (2014-2015) cover the
whole range of design and performing calculations
 nanoCAD the basic computer-aided design,
intended for the development and production of
technical documentation (2D drawings)
 and etc.
 Cameo SiSMl
7

8. Certificates
8
On 11th June 2013 Engineering company "Vostok" was
certified №UA2.043.07815-13 State Standard ISO 9001:
2009 (ISO 9001: 2008), is valid until 10 June 2018. This
certificate testifies that the quality management system
concerning the activities in the field of technical consulting
services, technical testing and research 74.20; 73.30; 74.84
(DK 016: 2010 71.12,74.90, 71.20) which are produced LLC
"IC" East "correspond to the requirements of State
Standard ISO 9001: 2009 (ISO 9001: 2008).
And other certificates which confirms of staff training to
work in the relevant software to perform design and
engineering work.

9. 1. Are tested with server technology NVIDIA GRID. The efficiency of the system was confirmed. Preparatory
works are underway by the introducing before the end of 2015.
2. Specialists are training to work in a software environment Cameo Systems Modeler based programming
languages, UML and SysML. (systems engineering) .
3. Also carried staff training conducting engineering and design work in the European standards (DIN, EN, ISO).
The benefits of implementing the technology NVIDIA GRID:
• remote control over the progress of work execution
• the guarantee of confidentiality and intellectual property rights of the Customer
• organization of joint work about the project by the contractors, design and scientific organizations
• high speed of information processing due to lack of need for its physical transmission on contractors server
• low requirements for computer equipment used by professionals which work remotely. All the computing
power and database focused on the server.
• The ability to use a single center of licensed software by several companies.
Program of development and efficiency
9

10. The injected structural and functional scheme of the company
10
Inside company Outside companyService Customer
Support
Allocated resources to the project
partners
Distance learning of students,
personnel retraining
Highlighted jobs for research-
intensive tasks of contracting
organizations
Service of external
technical support and
administration
The base of design, technical and
service documentation
The internal staff training and
personnel reserve
The base of company's knowledge
Working
places on
the server
platform

11. 1. DEVELOPMENT OF THE DOCUMENTATION:
• Project documentation for rolling stock (creation, modernization, re-engine, etc.)
• Development of design documentation mechanical engineering areas (hardware, equipment installation,
ventilation and air conditioning, electrical, pneumatic systems)
• Performing calculations:
-Static linear;
- Static nonlinear;
-Dynamic;
-Thermal.
• The development of operational documentation:
-Catalogs of parts and assemblies
- Manual
- Instructions for testing and tuning
- Statements of purchased items, specifications, spare parts, tools and accessories
* Development may be in the form of interactive documents for their subsequent publication on the local storage
media (CD, DVD, USB-stick) or server with providing of different access conditions.
How can we be useful in the projects?
11

12. 2. PROJECT OUTSOURCING AND ORGANIZATION OF REMOTE TECHNICAL SUPPORT PRODUCTION:
Prerequisites:
• CIS market makes it possible to attract a large number of skilled engineers
• Thanks to innovative approaches to the organization of jobs, we have the ability to attract a
large number of staff (determined by the production needs of the customer)
Opportunities:
• at the industrial enterprises there is no need to its own engineering departments (service,
department or bureau)
• no need to purchase or upgrade of software and computer equipment
• access to information via the web interface to access rights
• we can improve the efficiency and security of development projects, with a large component of
the Cooperation, by providing a single server platform renting or sharing of powerful remote of
workstations
We are ready for long-term cooperation in the area of remote engineering support and
development of new directions.
How can we be useful in the projects?
12

13. 3. MODEL-BASED SYSTEM DESIGN (MBSE)
• It allows to realize the relationship between:
- The architecture of the vehicle
- The technical requirements
- Vehicle systems
• Offer:
- The organization of joint training of specialists “LLC" Vostok "and the customer
- Development of methods of work
- Subcontracted for the integration of system models
- Development of system models on existing locomotives (products)
• The benefits of application:
- Reducing the time of design - Identification of problems in the process of constructing
- Improved communication between the different disciplines (systems)
- Diagnostics and simulation work systems and locomotive in general
- Controlled by complexity of the product
How can we be useful in the projects?
13

14. Why «LLC «Vostok»?
14
• Profile of Professionals – locomotive
• Are using specialized licensed software supporting all phases of the product
life cycle Software allows you to consolidate information from different CAD
systems (CATIA, NX, etc.)
• We have positive experience of cooperation with European companies
• Opened for innovations
• A flexible structure that can adapt to the tasks The high efficiency of Personnel
Management

15. We could be different:
What makes interest to us?
We can work as:
• project general contractor
• project subcontracting enterprise
• opponent and co-author on the engineering design at the level of ideas
15

17. Thank you for attention!
17