1. CURRICULUM VITAE
CHANDRASHETTY Email:chandrashetty2008@gmail.com
MTech.(PDM) B.E.(Mech) Contact No: +91-9844249669
CAREER OBJECTIVES:
 To pursue a challenging career, this utilizes my knowledge to the maximum extent in an
organization that can exploit my present skills and provide a platform for my career growth as
well as help me in contributing my best to the development of the company.
BEHAVIOURAL SKILLS:
• Good communication skill.
• Self-motivated and good team player.
• Good analytical and problem solving skill.
• Flexibility with an attitude to learn new technologies.
• Confident of my ability to work independently & as a team member.
PROFESSIONAL SUMMARY:
• Presently working for DIEHL AIRCABIN Gmbh. from Cyient Ltd. as Senior Design engineer
closely coordinating with clients for A-350 Cabin interiors projects.
• 6 months exp. in ODS Offshore Design Solutions Pvt Ltd.as Technical Design engineer
• 1 year experience in Tantra Infosolutions Pvt Ltd.as Design engineer
• 1 year experience in Actualize Consulting Engineers (India) Pvt Ltd .as Design engineer.
EXPERIENCE SUMMARY:
• Good exposure to Surface, Part & Sheet metal Modeling, Detailing & development.
• Good exposure to ATA25 & Aerospace Interior Products.
• Good Exposer to Tubing (Piping) Design.
• Good experience in Aerospace, Locomotive & Oil & Gas fields.
• Good exposure to CNC Programming & Operations.
• Good knowledge on GD&T Symbols & their applications.
• Good knowledge on Stack up Analysis and DFMA.
ACADEMIC QUALIFICATION:
• MTech., in Product Design and Manufacturing(Part time), from B.M.S. College of Engineering
Bengaluru, Visveswaraiah Technological University (V.T.U), Belgaum – (2011-Pursuing
Project).
• B.E., MECHANICAL ENGINEERING, from N.M.A.M. Institute of Technology Nitte Karkala,
Visveswaraiah Technological University (V.T.U), Belgaum – (2005-08).
• D.M.E., from D.A.C.G. Polytechnic Chikmagalore, B.T.E, Karnataka – (2000-04).
• S.S.L.C., from Board of Secondary Education, Karnataka – (1997-98).

2. TECHNICAL SKILLS:
• CAD Tools: CATIAV5 R18, Enovia(DMA2.2 & DMA2.3), TEAM CENTER, AUTODESK
INVENTER Professional-11,2009, 2010 & 2011, Solid Works, AUTO CAD 2004 – 2011 &
Analysis Tool like Ansys.
• Packages: Ms-Office, Ms Word, Ms Excel, Power point etc.
• Operating Systems: Windows NT/2000, Windows XP, Windows 07,UNIX(AIX) etc.
PROJECT WORKS:
Project 1:
Project Name: INL-101040.
Client: ATLAS COPCO PUNE.
Description: INL-101040 is a dynamic air compressor used for compressing & storing of air. This is
a type of axial air compressor sucks air axially & compresses dynamically with the help of axially
arranged turbine blades. It is used in power plants, Drill Rigs etc.
Role: Team member.
• Sheet metal, Structural, piping and solid modeling.
• Carried out various manufacturing drawings & their standards.
Responsibilities:
• Modeling of components like base frame, cooler, motor, piping, Cabin interiors etc & their
drawings.
• Check for the interference and assembly.
• Check for Manufacturability, Applying GD&T, Stack up Analysis, Etc,,,
Software used:
CATIA V5 R17, Inventor-2011 & AUTO CAD.
Project 2:
Project Name: FWI(Air Caraïbes) S2FL & S2FR STOWAGES DESIGN -A350.
Client: Diehl Aircabin GmbH, Laupheim.
Description: Stowage is the amount of room available for stowing materials aboard an airplane.
Stowages are an essential part of air travel, catering for passenger's personal possessions in a safe
and contained way. Passengers want to carry more on to the aircraft, so the aircrafts wants add extra
spaciousness to the cabin and the large overhead stowage bins to match growing cabin baggage
volume requirements.
Role: Team member.
• Check & analyze the environment parts & assemblies in the cabin area to perform the design of
specified stowage.
• Create each part or sub-assembly or assembly, according to the functional requirements using
master geometries.
• Adding all the required Inserts and other standard parts used in line with the requirement.
• Creation of respective detail drawings, assembly drawings, installation drawings as per the
scope of project.
• Creation of BOM in Team Center, Comparison of BOMs, Releasing process in PLM TOOL(Team
Center).

3. Responsibilities:
• Creation of Parametric Modeling of components & their drawings.
• Check for the interference and assembly.
• Check for Manufacturability, BOM, Applying GD&T, Etc,,,
• Updating the Closing points after the Review done by Customer.
Software used:
CATIA V5 R20, Enovia(VPM) & Team Center 10.
Project 3:
Project Name: 2216-18 CTS system.
Client: KEPPEL FELS.
Description: The Conductor Tensioning System is a cassette style tensioning system. The CTS is a
platform that from with-in itself, will apply a tension of 600 kips to the conductor. This CTS is
designed for Jack-up installation below the drill floor. The system is designed to locate the BOP in any
position 15’ port & 17’ STBD from the centerline, along the same plane.
The CTS consists of a Conductor Tensioning Unit (CTU), Conductor Tensioning Platform (CTP),
Conductor Tensioning Frame (CTF), Conductor Tensioning Rails (CTR), Sliding Floor Section (SFC),
Storage Cassette to House Floor Sections, Hydraulic Power Unit (HPU), Accumulators and Control
Package.
Role: Team member.
• Creation of General Arrangement Drawing, concept generation, concept modeling etc.
• Structural and solid modeling etc.
• Carried out various manufacturing drawings & their standards.
Responsibilities:
• Structural Modeling & Analysis of CTU, CTP, CTF, CTR, SFC & their drawings.
• Check for the interference and assembly.
Software used:
Inventor-2011,PDM Tool Vault, Ansys & AUTO CAD.
Project 4:
Project Name: XCC ENNO cabin interior trims.
Client: ALSTOM Transport - Reichshoffen, France.
Description: The XCC Enno project is a set of regional trains for RGB client.
The XCC Enno is a train that is produced by Alstom Germany and definition of XCC S5-S8 may serve
as a model for certain fixtures.
Role: Single point contact.
• Check & analyze the environment parts & assemblies in the cabin area to perform the design of
specified real parts.
• Create each part or sub-assembly or assembly, according to the functional, manufacturability
requirements.
• Creation of all the required fasteners and other standard parts used in line with the
requirement.
• Creation of installation in PSN under cabin paneling to have various concepts,
• Creation of respective detail drawings, assembly drawings, installation drawings with BOM as
per the scope of project.

4. Responsibilities:
• Creation of parts, Sub-assemblies, Assemblies & their drawings.
• Creation of Ditto's(Standard parts Product), Creation of PSN Structure.
• Check for the interference and assembly.
• Check for Manufacturability, Applying GD&T, Stack up Analysis, Etc,,,
Softwares used:
CATIA V5 R18 & Enovia(DMA2.2&DMA2.3) .
PERSONAL PROFILE:
Father’s Name : Sagana Shetty
Date of Birth : 11th March 1984
Marital Status : Married
Nationality : Indian
Languages Known : English, Hindi, & Kannada.
Residence Address : #74/2, 2nd
cross, 4th
Block, Thyagaraja nagara,
Bangalore-560028.
Permanent Address : Doddabyadagere, Hebbal post, Belur tq, Hassan dst,
Karnataka.
ACHIEVEMENTS & HOBBIES:
• Won prize in District level Quiz competition.
• Won prizes in various sports (Volley ball, Cricket, Kokko Etc).
• Playing Cricket and Carom.
DECLARATION:
I hereby declare that the information given above is true and correct to the best of my knowledge
and belief.
DATE: / /2016
PLACE: Bengaluru (ChandraShetty)