4. HOUSE RULES
•Turn off your microphones.
* You can only turn on your microphones
when you are given the opportunity to recite
before the class.
•If you have questions, comment it on the
chatbox
5. • You are not allowed to broadcast or share any information of you or
your classmates, be it private, personal or sensitive to prevent us
from breaking the R.A. 10173 otherwise known as the data privacy
act.
• No bullying. R.A. 10627otherwise known as anti cyberbullying act.
• Make sure that you have with you your modules, a pen and paper.
• If you need to attend personal matters, just ask permission from the
facilitator through the chatbox
7. OBJECTIVES
•Identify components to be measured
•Select measuring tools in line with the job
requirement
•Perform calculation on resistance value of
resistors
12. GRADUATED CYLINDER
USE
-It is used in
measuring volumes of
liquid
APPLICATION
-Cooking or baking
-Chemical mixtures
-Volume of ferric chloride
to be used
-Exact mixtures of liquids
14. PULL-PUSH METER
USES
-It is used to measure
the length of an object
with a metallic
measuring instrument
rolled within a closure.
With the length of 3 m –
7.5 m.
APPLICATION
-Length of wood
-House area-Construction
purposes
-Road construction
20. MULTITESTER
USES
-It is used to measure
voltage, resistance and
milliammeter.
APPLICATION
-Used to check
electronic components
-Voltage checking
-Milliammeter check
26. VOLTMETER
USES
It is used to specifically measure
voltage
APPLICATION
-Battery voltage
-AC source voltage
-Power supply voltage
-Voltage checking on devices
28. PROTRACTOR
USE
-It is used to mark or measure the
angle of an object.
APPLICATION
-Angles of tables
-Angles of speaker box to
be made
-Projects requiring angles
29.
30. WHO ARE YOU GOING TO CALL?
Lapu- Lapu uses his huge blade to crack coconuts.
After so many times of using it, he is concerned
with the alignment of his blade. He wants to check
whether the blade and its handle is forming a 90-
degree angle. What measuring instrument should
Lapu- Lapu uses?
31. •Alpha is a cyborg and he wants measuring
device which can measure his resistance,
amperes and voltage at the same time. What
should he use?
32. Optimus prime can transform into a truck and has many
wires in his body. In order to perform better, the wires
must be checked for its resistance or continuity. What
measuring instrument must he pick and use?
36. COLOR MATTERS
Identify the colors of the following without
being distracted by the words. Tell the color
of the words as fast as you can.
37.
38. COLOR CODING
• The process of getting the value of the resistor by
the color embedded to the carbon resistor.
39.
40. PROCEDURE IN COLOR CODING THE VALUE
OF RESISTORS
• Identify which of the color is the first band of the
resistor. Take the resistor and see the color gold or silver
(tolerance). The tolerance must be at the right side of the
color set of the resistor when held. The most left color of
the resistor is the first band when the start of reading
takes place.
42. • Using the color-coding table, write down the
value found in resistor with the corresponding
color. The first band gives the first number, the
second band gives the second number, the third
band gives the multiplies or the number of
zeroes, the fourth one represents the tolerance.
48. STEPS IN GETTING THE TOLERANCE VALUE OF
RESISTOR
GET THE VALUE OF THE RESISTOR
GET THE TOLERANCE VALUE OF THE RESISTOR.
GET THE MINIMUM TOLERANCE VALUE OF THE RESISTOR
GET THE MAXIMUM TOLERANCE OF THE RESISTOR.
49. ASSESSMENT
Answer the following questions in 5 minutes.
1. What are the two types of testers?
2. Differentiate the types of testers.
3. What are the tolerance values of gold? Silver? No color?