1. Randy G Meyer
13401 Crocus Ave NW
Hartville, Ohio 44632
419-699-9630
RANDYMEYEROFMBL@NETZERO.COM
Goal : To obtain Safety Manager or Supervisory Position. Have current OSHA 500, 20
years management experience, and2 Journeyman Cards. I am a highly motivatedself-
starter withastrong work ethic. I am highly adaptable and have a broad based skill
set. Team building and leadershipare my strongest assets. Willing totravel.
WK Industrial Services Safety Manager 2/14 –1/15
Was Site Safety Manager at Alcoa Tennessee Automotive Project, installing equipment for the
production of the aluminum body panels for the Ford F 150. Conducted Safety and Site Orientation
training prior to employees going on site. Conducted daily tool box safety meetings and daily safety
field audits. Was responsible for all Site Safety Compliance for 60 to 70 man crew and supervising my
Associate Safety Manager. Reported to EPCM/CCC Site Safety Manager. Attended Daily Group Safety
Meetings with Safety Managers of all 22 Contractors on Site to coordinate daily activities and identify
conflicts.
W K Industrial Services ToolCrib Manager/Machinist 8/13 – 11/13
Ordered tooling and materials for Ocean Spray Project in Allentown PA. Maintained and
Inventoried tooling and materials to keep work flowing smoothly. Did fabrication work as
required to assist with installation of equipment as project progressed.
TradesmenInternational MillwrightLeader Alcoa Aluminum 3/13 --- 8/13
Installing and maintaining equipment in new Smelting Facility in Barberton Ohio Plant. Safety Manager
for all Millwright Crews on Project.
Tradesmen International Millwright Leader Alcoa Aluminum 6/12 -- 11/12
Installing new equipment in new Smelting Facility being built in Barberton Ohio Plant. Safety Manager
for all Millwright Crews on Project.
TradesmenInternational Machinery Builder S E S Engineering 3/12 --5/12
Worked with team building machinery for V M Star Steel’s new facility in Youngstown. Safety Manager
for all Machinery Builders on Project.

2. Aerotek Maintenance Supervisor GM Lordstown 11/11 – 2 /12
Supervised Millwrights, Tool Makers, and Pipefitters in General Assembly Area of Plant. Responsible for
ongoing safety training of crews. Personally conducted required Safety Training and supervised all
Confined Space Entries, Pick Plans for Aerial lifts in high risk areas, and tie off procedures.
Tradesmen International MillwrightLeader Alcoa Aluminum 4/11 – 11/11
Group Leader of Millwright Crew installing New Production Lines in Barberton Ohio Plant. Safety
Manager for all Millwright Crews on Project.
T E Ibberson Millwright/Multi Craft Foreman 4/10--8/10
Led Millwright Crews doing Plant Shutdowns in New Orleans area for Cargill and ADM facilities. Leader
of Site Safety Team. Did Safety Training and Orientation of all Millwrights. Performed daily Tool Box
Safety Meetings and ongoing Safety Field Audits on allMillwright Crews.Reported to Site Safety Manager
Audit Results and Areas requiring improvements.
T E Ibberson Millwright/Multi CraftForeman 4/09 – 10/09
Led Millwright Crews installing conveyor and dust systems at Destrehan Grain Export Project.
Involved with allaspects of “ Start Up “ activities bringing plant on line. Leader of Site Safety Team, which
involved ongoing Safety Field Audits and reviewing with Site Safety Manager recommended
improvements.
TIC The Industrial Company Lead Millwright of StartUp Team 12/07--4/08
Led Millwright Crews bringing all equipment at Coshocton Ethanol Plant on line. As equipment was “Run
In”, I was responsible to identify problems and correct them. Completed maintenance manuals and
tagged equipment to turn over to plant operating personnel. Member of Site Safety Team. Did Safety
Field Audits on all members of Start Up Team and reported to Site Safety Manager on Audit Results.
T E Ibberson Millwright Crew Leader 3/07 – 12/07
Involved in all aspects of construction of Coshocton Ethanol Plant. Installed all conveyor systems on
overhead trusses and in tunnel systems with grain hoppers. Member of Site Safety Team.
Pro Maintenance Services Millwright/Machinist 11/06 – 3/07
Worked as millwright on mobile maintenance crew at AK Steel. Transferred to machine shop as precision
grinder. Operated OD Grinder grinding finish surfaces on rolls used to roll sheet steel.
FordMaumee Stamping Machinist/Foreman/Superintendent 3/77 – 9/06
Built, installed, and serviced welding fixtures used in the assembly of sheet metal parts in automotive
assemblies. Installed production lines, robotics, and conveyor systems used in conjunction with welding
fixtures. Supervised all skilled tradesman of various crafts and departments. Was responsible to develop
and implement Safety Program for All Skilled Tradesman in conjunction with Plant Safety Manager.

3. Doehler Jarvis Machinist/Machine Repairman 8/72 –3/77
Served 8,000 hour apprenticeship as Machinist and Machine Repairman. Worked in machine shop to
build new manufacturing equipment for die cast plant from blueprints to tolerances of 0.001”. Installed
and repaired equipment in production areas of plant. Have Certificate of Completion as Journeyman
Machinist and UAW Journeyman Card as Machine Repairman.