1. Paul Ageh
2381 E Calle Lena Verde
Tucson, Arizona 85706
Kingag24@yahoo.com (520) 891-4064
Objective:
To serve as an Aviation Technician in a leading Maintenance company
where I can show my skills and wellbeing for the organization.
Summary of Qualification & Skills:
Communication with co-worker, working well under pressure, reading and
understanding manuals and various forms of technical data. Towing aircraft and
forklift use. CRJ-200 Gen FAM Certified and experience signing logbooks for
Endeavor.
Work Experience:
AAR (Duluth) as Contractor: December 2014- Present
Work duties: I worked as interior mechanic performing H-checks on Airbus
A319, A320 and A321For Air Canada. H-check included a removal, Inspection, cleaning,
repairing, and installing of all removed items and components. Items I have removed
And installed included galleys, lavatory’s, floorboards ,carpet, sidewall panels, celling
panels, passage seats, and overhead bin. I have also done some basic sheet metal
work such as removal and installing of faster, rivets, hi loks and some repairs to thrust
reverser. I also did some A&P work including removing varies fairings, remove and
replacing cockpit windows and sling windows, sheet metal repairs to the thrust reverser,
installing and removing varies components, and op’s check to the oxygen system.
TImco Aviation (CVG) as Contractor: September 2014-November-2014
2. Work duties : Performed interior mod on CRJ-200 which included removal
of seat, windscreen, and dado panels, side wall panels, lavatory basically a complete
interior removal and refurbished. Some C check experience on CRJ-900 Included
varies task such as installing and removing flight controls ,interior , fuel panels wing and
body faring , varies op’s check and some troubleshooting. Also performed detailed seat
removal, inspection, and installation of cabin seat assembly.
.
Kingman Airline Services: September- 2013 –September
2014
Work duties: Performed ( RTS) return to services on CJR-200 and ERJ 135,145
RTS tasks included various ops checks and troubleshooting on components and
systems. Complete inspection and Analysis of A/C and its condition. Lubrication on
various items including, doors, landing gear, HSA etc., Installations of Avionics, Taking
fuel samples, Changing and servicing all fluids. Prepping Aircraft for flight up to
airworthiness standard via A/C MM .Other duties performed at Kingman Airlines
Services: QEC of engines on CF34-1B and Roll Royce 3007 A1, Also performed
removal and instillation of those engines. Storage and inductions on duties on ERJ 135,
140, 145, 170, 190, CRJ-200 and C-130
Strom Aviation, contracted at Marana Aerospace: October-2011-Septmeber 2013
Responsibilities: Performed tear down duties on commercial jets B737, B747, B
757, B767, DC-10, DC-9, A320. Removed, flight controls hydraulic parts, tires, brakes,
avionics parts, and fairings. Removed hazardous material from aircraft, defueling fuel
tank and bleeding hydraulic reservoir, used the IPC to look up part numbers and AMM
for removal of parts.
Tucson Residence Foundation: February 2011 – October-2011
Responsibilities: To assist in long term care and support residential locations owned or
leased by the Agency to provide all individuals opportunities to learn and use skills
which allow them to increase more independence, community integration, and personal
3. fulfillment by providing direct service support. Transportation is provided to ensure
access to the community.
University of Arizona Student: August 2005 –January 2012
Responsibilities: Student Union Worker – Catering & Redington
Restaurant Responsibilities: To perform duties required to serve to consumers at
various events and restaurant settings. Waiter, food prep, catering, special event staff,
clean-up, stocking, & inventory.
Education: Sahuaro High School – Graduate
Pima Community College - Aviation Technology program- Graduate
License: Airframe & Power plant