See attached

1. Curriculum Vitae
Muhamed Shafiq Anjum Shafi
July’ 2015
Name/Surname : Muhamed Shafiq Anjum Shafi
Date of Birth : August 28, 1981
Nationality : Pakistani
Profession : Lead Inspection Engineer E&I / Commissioning Engineer
Educational Qualification : DAE Associate Engineering (Electrical) - PBTE/DAE/24611 Lahore, Pak
S.S.C (Matriculation) - PBISE/SSC/147670 Multan, Pak
Technical Certification /
Profile Glance
Achievement(s)
: CQE (ASQ-Certified Regst.# 65373091 / Cert.# A7481) - American Society for Quality, USA
CQE - Certified Quality Engineer - Franklin University, USA (Exam Passed, Awaited Certificate)
CQE - Certified Quality Engineer CQE-ASQ Body of Knowledge - CHICAGO Institute of
Technology, Abu Dhabi UAE
Certified QA/QC Engineer (ACAC Certified Reg.# ACAC803132) – The Accreditation Standard
Council, USA
Certified QA/QC Engineer (KHDA, Dubai Reg.# KHDA-1998-014-963) – Development Institute
for Science & Computer, Dubai UAE
ISO 9001-2008 QMS Internal Auditor (Cert.# OMCT-550619102/2015) - Orient MCT, Abu Dhabi
ISO 9001-2008 QMS Lead Auditor (IRCA Certified) London UK (Exam done, Awaited IRCA final
Result & Certificate)
Certification in Science & Power, Circuits (Royal Charter Certified Cert.# RC/ESCP/282173) -
City & Guilds of London Institute, Pak
AUTO CAD (P2A.C/VPR.2007) Professional (Reg. # PS/SD/P2A.C/1329) - Peak Solutions
Institute, Lahore Pak
Training Courses &
Seminars Attended
(QATAR, UAE, KSA)
:  OFF SHORE-SEA SURVIVAL & HUET (Helicopter under water Escape) Training 2014 from
(ETSDC) Emirates Tech Safety Development Centre, Abu Dhabi-UAE
 HSE Safety Induction Course (ADMA-Off Shore) ZIRKU, DAS Island Abu Dhabi-UAE
 H2S/BA Awareness - VGTC Centre, Qatar
 Hazard Effect Management Process (HEMP) KSA
 Safety Training Observation Program, Petrofac Abu Dhabi-UAE
Operational & Maintenance Training Courses for
 132KV, 33KV ‘’GIS’’ Type, HV Switchgears - Schneider Electric
 6.6KV ‘’Metal Clad’’, MV Switchgears – Schneider Electric
 LV Switch Board, MCC Motor Control Centre - ABB/Siemens/Schneider Electric
 DMS, DCS, HMI, PLC (SCADA) - ABB/Honeywell/Schneider Electric
 UPS 24Vdc, 110Vdc, 48Vdc & 240Vac) - AEG/Power Solution
 DCS “HMI” Modification 800XA System - ABB/Honeywell
Driving Licenses : Holding AE-2142409 Driving License Abu Dhabi - Validity up to Dec, 2023
Holding GTSC-62223 Desert Driving License - Validity up to August, 2016 (GTSC, Abu Dhabi)
Holding CVT-20267 Defensive Driving Course - Validity up to July, 2016 (CVT, Dubai-UAE)
Computer Skills : Ms Office, Adobe Photoshop, Internet
Window Xp, Window 98, Window 2000
Language(s) known : I can Speak English, Arabic, Urdu, Hindi frequently and Specking/Writing power is so good in
English, Urdu

2. DNVGL/CV/FORMAT/VER-2.0-07/2015/MSA 2
Summary of Experiences :
-
-
Having around 15.4 years experiences in Middle East Countries (UAE, KSA, Qatar and Pakistan)
in the field of Engineering, Construction, Quality and testing expertise being a client representative
as Company/TPI/PMC/PMT with well reputed clients, Gasco, Takreer, Adma-Opco, Aegean,
Zadco, Al Hosn Gas, Leighton, Gupco-Enppi, KJO, Dolphin Energy, Qatar Petroleum, Qatar Gas,
EDT QP Dukhan, PAPCO, OGDC, Lesco/Wapda Pak and Bechtel Arabia KSA.
Experienced in various Mega projects in Oil & Gas Industry, Plant Processing Facilities, Oil & Gas
Pipeline, Refineries, Water Transmission Pipeline, Infrastructure, Submarine Composite Cables
Inspection, Power Transmission lines includes Sub Stations 11/0.433KV to 132KV Systems.
Experience and expertise in supervision of Erection, Installation, Pre-Commissioning,
Commissioning, Quality Control and Vendor Inspections of LV/MV Electrical & Instrumentation
systems includes SCADA Integration, Electronic Control System (ESD/DCS/PLC/ACS/RTU), Port
Special Systems, Telecom, LAN, WAN, TNMS, PAGA, CCTV, F&G, FOC and Cathodic Protection
systems adept in Engineering standard, Project specification (DGS, DEL, QGPS, TOTAL) and
other IEE, IEC, SABIC, QPES, BS Standards.
Testing Expertise :
-
-
-
-
-
-
-
-
-
-
-
-
Proficient and well knowledge about Logic, methodology of operational, functional test for following
System/Sub Systems, (FAT, IFAT, ISAT, SAT) & PRE COMM., COMMISSIONING
Power Transformers (Up to 120MVA) IR test, Winding Resistance (HV-G, LV-G, HV-LV),
Polarization Index test, CT test, Voltage Ratio test, Vector Group test, Magnetizing Current test,
BDV test for Oil, Neutral, bushing CT, Mechanical Protection & RTCC Operation tests.
HV, MV, LV Switchboard (132kv, 33kv, 11kv, 6.6kv, 3.3kv, 0.433kv) Mechanical Operation test,
functional test of HV/LV in Service & test position, Bus Bar Hi Pot, IR, Continuity test, Contact
Resistance (µΩ) test, Primary Injection for Ammeter, Voltmeter, Incomer Logic test, Interlocking
with AQT, ATS, NCS and DCS system.
CT's & VT's test (Metering & Protection) CT test (IR/Winding Resistance/Ratio/Class/
Burden/Polarity/Excitation), VT test (Ratio/Burden/Polarity) by Current and Voltage Injection.
Protection Relays test Relay setting, configuration, testing of Electro-mechanical and
Microprocessor relays (RD148, MIM200/300, REF630/615, RET, REM, RED) with relay functions
of 25, 27, 46, 49, 50, 51, 67, 81, 87 etc.
Numerical relays and protection relay system of Sepam Series (20, 40, 80), Differential protection
relays" & "MIB30" HID (High Impedance Differential Module), MRL1 Lockout relay, TCP Micro
logic relay Series 5.0A & 6.0A and "SR-745" GE TR Management relay, MR Tap Changer
"TAPCON 240"
HV/LV Circuit Breakers test Breaker Analyzer test, IR test, Contact Resistance, Tripping and
closing time test of HV/LV circuit breakers.
Hi Pot test for Bus bar, Bus Duct & Cables: DC Hi Pot test of HV cables (3.3kv, 6.6kv, 11kv,
33kv) and AC Hi Pot test, Insulation Resistance test, DC resistance measurement test, Metallic
Screen DC resistance test, Capacitance Measurement test and Contact Resistance test of MV/LV
Bus bars/Bus duct.
Submarine Composite Cables 6.6/11kv Material Receiving & Witnessed test: Non Electric
tests; Overall dimension check, Conductor Screen, Inner Layer and Outer Sheath thickness and
Serving check, Water Blocking Tape check, Conductor Sheath and Anti-Corrosion Sheath check,
Anti-Teredo Protection Test (No of copper tape, copper tape thickness and overlapping check),
Inner Sheath / Bedding, Bitumen check, Armour Check and Binder Tape check, Filler, Insulated
steel fillers, diameter check over the insulation, steel rope and no of wire check.
Electrical test; Power Frequency voltage test withstand 23KV/5minuts, Insulation resistance test
after and before of HV test, Conductor DC resistance measurement test, measured the resistance
corrected to at temperature @ 20degC, Metallic Screen DC resistance test, Capacitance
Measurement test
Fibber Optic Cable Test; Non Electric Test, Visual check, overall dimension check, outer
Insulation thickness check.
Electrical Test; Attenuation @ 1310nm and 1550nm, OTDR (Optical time domain reflector) test,
end to end test and Splicing with fusion arc splicer.
Sub Stations Energization Stability test of Power transformers and Bus bar; Line differential,
Transformer differential protection, End to End test up stream to downstream, Energization of

3. DNVGL/CV/FORMAT/VER-2.0-07/2015/MSA 3
-
-
-
-
-
-
-
-
-
power transformers, MV and LV switchboards.
Diesel Generator Sets (5.5kva up to 2500kva) On load/Off load vibration measurements, Alarm
& trip logic checks for protection, Transient response load test (0-25% to 100-0%), Noise level
Measurement (Alternator & Engine), Alarms & Shutdowns on Engine (Emergency Stop/Diagnostic,
Over Speed, Low oil pressure, High coolant temperature test), Painting DFT checks, winding
Insulation resistance checks and full load test.
UPS’s & "TPR" Invertors and Battery Charger Batteries Charging & Dis-charging test of
24VDC, 110VDC, 48VDC & 240VAC and Invertors protection test (Float charging, Low level, earth
Fault, Temperature Limit) etc.
Cathodic Protection Controller test, Pipe to Soil, potential measurement swing test, AC
interference test & line current measurement at EBB points for U/G, A/G Oil & Gas pipeline.
TELECOM/LAN/WAN/TNMS System; System PING test, system Redundancy test, system
Interface test, system Optical Signal level test (Optical TX Power & Receive Sensitivity check)
CCTV System test; Monitoring test from Operator monitor, Operator Live Viewing Test, Calling
Cameras test using digital sentry, Video Playback & Recording Test, Pan / Tilt test.
Telephone System; Answering calls test, making calls test, automatic Redialling test, Voice
Clarity check test.
PA/UHF Radio System; Transmit Power & Frequency Measurement Test, UHF Duplexer test,
Radio Voice functionality test, Interface to LAN, TNMS system, Interface to Voice Recording /
Dispatcher System, F&G system Interface test.
PDH Multiplexer, Ethernet Switches, Media Converter; DM2+ Bit Error Rate Measurement test,
Ethernet interface Unit End-To-End test, EPSA Alarm test, Configuration and Traffic verification
test, Through-Put test, LC Transceiver Transmit Power, Receiver Sensitivity test.
WORKING EXPERIENCE / EMPLOYMENT SCAN
Period:
April 2013 to
till date
Company : DNV GL, ABU DHABI UAE
Position : Lead Inspection Engineer E&I

4. DNVGL/CV/FORMAT/VER-2.0-07/2015/MSA 4
Projects : Major Projects, Oil & Gas Middle East
ADMA-OPCO:
a) SARB Island Package-6 Project, EPC Work For Drills Camp and Associated Utilities
b) +100 MBD Das Island Project (Off Shore)
c) Nasr Umm Lulu (Brown & Green Fields) Projects
d) Flares Modification Revamp Project, Das Island (Off Shore)
e) Crude Oil Loading Facilities Project
f) ZWIUP Project (Off Shore)
g) DE mothballing Project
h) Zakum West Super Complex (GGII) Project
i) CTU Treatment Unit Modification Project
ZADCO:
a) Satah Full Field Development (STFFD) Project
b) Thammama ll-Wad Phase-1 Gas Injection Project
c) EPC of work for black Powder Filtration System Project
d) Upper Zakum 750k, Accommodation & Utilities Project
GASCO:
a) HABSHAN-5 Sulphur Granulation Plant
b) 4TH NGL Train & IGD Tank-Ages Project
DOLPHIN ENERGY:
a) Export Gas Compression Facilities Upgrade Project
b) 48’’ Taweelah to Fujairah Down Stream Gas Pipeline Project
c) Third Party Gas Interconnecting Faculties Upgrade, Qatar
d) Ras Laffan Treatment Plant Unit 131 Diesel Train, Qatar
AL HOSN GAS:
a) EPC Package SGD-11 Project
b) EPC Package SGD NP-10 Project
MALAYSIA/LEIGHTON:
a) S432, South Oil Sea line Project
ENPPI/GUPCO KSA:
a) GUPCO Rehabilitation Project
KOC/KUWAIT OIL COMPANY:
a) EPC of Supply, Erection, Operation, Maintenance of Gas Turbine to Up Grade Power
Capacity At Sabia & Az Zour Power Plant Projects
b) EPC of Effluent Water Disposal System at GC-15 ,GC-25 and Injection pump at CIPF/N
QATAR PETROLEUM:
a) EPIC of 16” JET A1 Fuel Pipeline Project
b) Offshore National Security Shield, Qatar
c) QSTec Polysilicon Project Phase-1, Qatar
d) EPIC of New CIB 33/11kv PDS Halul Island Project (Off Shore)
e) EPIC of Anti surge & Turbine Controls Upgrade @ KN, KM, JDS & RG Project
f) EPIC of Integrated Chiller, Freezer, Laundry, Dining & Accommodation Facilities In Halul
g) EPIC of Online Condition Monitoring System for Rotating Equipment Dukhan fields, Qatar
h) EPIC for Gas Supply to Ras Abu Fontas (RAF) Power Station-W2, Qatar
i) EPIC for Forward Mounted Base (FMB, NSS) Qatar
j) Doha South Sewage Treatment Works 40 MID Expansion

5. DNVGL/CV/FORMAT/VER-2.0-07/2015/MSA 5
Job Responsibilities :  Review and develop QA/QC Procedures and Quality Inspection Plan for all E&I work activities
includes Vendor inspections, material visual Inspection, FAT, IFAT, Calibration checks,
Packing, Marking, Issuance of inspection report and shipping released etc.
 Do witnessing test of HV, LV, MV and Fiber Optic Cables, MV, LV Switchgears, DBs, JBs,
Fire Alarm Control Panels, Pressure Gauges and Transmitters Instruments including materials
as per approved ITP, FAT, IFAT procedure and QP Plans.
 Do witnessing the loop sale, Interlocks functional test and ensure that all requirements in
specified procedure and narratives are being established.
 Designing and developing new control systems and maintaining and modifying existing
systems to ensure that these systems and processes operate effectively and safely carry out
site acceptance testing and the commissioning.
 Review ITPs to verify that Execution Contractor is performing all required inspections and
witnessing hold points, review Company Inspectors deliverables, analysis, resolve issues and
problems emerging during the Quality control activity and ensure that all inspections and tests
witnessed by Company Inspectors are recorded and documented.
o FAT of “500KVA-120MVA” Power Transformers at Siemens/Brush/Emirates Transformer
o FAT of MV/LV Switchgears at ABB/Siemens/Schneider-Electric
o FAT of 415V LV Switchboards at ABB/Siemens/Eaton/Al-Dafir/Masseera
o FAT of HVAC Control panels at Prisma/Honeywell/York
o FAT of Variable Speed Drive System at Emerson/Siemens/Schneider Electric
o FAT of HG7-Passive Harmonic Filter System at L&T Automation FZE
o FAT of Drive-Applied Passive Harmonic Filter system at Proserv
o FAT of PFC (Power Factor Capacitor) and Active Harmonic Filter System at Eaton/Proserv
o FAT of MV, LV, Control & Instrument cables at MESC Rak/Ducab, Dubai/Musaffah
o IFAT of Control Systems (PLC/DCS/SCADA) at ABB/Yokogawa/Honeywell/Silvertech
o IFAT of DCS “HMI” Modification 800XA system at ABB/Silvertech/Honeywell
o IFAT of “PEMS” Predictive Emission Monitoring system at Yokogawa/Honeywell
o FAT of FACP, HSSD, VESDA F&G System and Detectors at TYCO/NAFCO/Zeener ZLC
o FAT of CCTV & Security Control System at TYCO/Honeywell/3W Network
o IFAT of LAN, WAN, PAGA, ACS, PA/UHF Radio and Telecom systems at ABB/3W Network
o FAT of Diesel Generator (Rated up to 2800kva) at Caterpillar-Al Bahar/FG Wilson/Perkins
o Cathodic Protection System Inspection at AEGIS/Bss-tech
o Inspection of Ex’e/Ex’d Explosion Proof JB & PJB at Weidmuller/Walsall/Cooper/Bartech
o FAT for Inergin System, Chemical Injection skid, Electro-Chlorination Skids, Condensate &
NGL Shipping Metering Skid Packages at Proserv/Tyco/MISWACO/FMC
o Safety Relief Valves, Hydrolytic/Pneumatic actuators visual, function test & Bench Calibration
test at Proserv/Emerson/Adyard/NPCC
o FAT of Wellhead Control Panel, Local Gauge Control Panel & Emergency Shutdown System
with combination of standard Pneumatic and Hydraulic/PLC based logic in a single integrated
solution such as Single/Multiple WHCP controls for both onshore and offshore applications at
Proserv/Versatech.
o FAT of Modular Multi-Wellhead control system, PLC Based Wellhead control system, as
Instrumented Protective System (IPS) for Wellhead valves Open/Close sequence, Control,
Operation and shutdown safety requirements & to meet high degree of Reliability, functionality
Integrity of the system at Proserv/Silvertech/Versatech.
o FAT for Contacting/Retractable, pH Sensor/Total Chlorine Sensor and Analyzer system, ABB
Analyzer Houses/Shelters, Solar System, CPIC at AIMS/Emerson/Versatech.
Period:
May 2011 to
Feb 13
Company : MOODY INTERTEK, ABU DHABI UAE
Position : Electrical TPI/GASCO “PMT”
Project :
a). 4th NGL Train & IGD Tankages Project
b). SWI-3, Seawater Intake-3 Project

6. DNVGL/CV/FORMAT/VER-2.0-07/2015/MSA 6
Job Responsibilities :  Site job execution, Interacting with vendors, Coordination with inspectors, attending walk
downs for RFC, RFSU, Issuance, clearing punch points, pre mechanical completion of
systems and witness the HV, MV, LV power distribution systems functional test, supporting
pre-comm., commissioning and start up activities.
 Review construction drawings IFC, AFC, P&ID diagrams, hook-up, Interconnection diagram,
typical installation details, loop, logic diagram, Cause & effect and participate in the
demonstration handover and acceptance of the system with operations group.
 Responsible for installation inspections of equipment, Power Transformers (up to 20MVA) and
MV, LV Switchgears, SB & MCC control panels, HVAC (MCC) Unit, DCS System, RTU
System, NCS System cabinet, Junction Boxes, Marshalling boxes, Motors & Compressors,
UPS’s & "TPR" Battery chargers, Lighting & Small power system, Earthing, Heat Tracing &
Lightning system activities.
 Installation inspection and functional test for Diesel Generator sets (7.5kva upto 10kva).
 Installation, Inspection and functionality test for Modular Multi-Wellhead control system / PLC
Based Wellhead control system, as Instrumented Protective System (IPS) for Wellhead valves
OPEN/CLOSE sequence, Control, Operation and shutdown safety requirements.
 Installation, Inspection and Surveillance for all metallic equipment’s & Structures in seawater
“stop logs, Raking bar screens, travelling band screens, Pump body” and ensure that are
protected by impressed current Cathodic Protection system.
 Installation, Inspection and testing for electrode and ensure that each part of the zone shall be
monitored by reference electrode and shall be positioned such that all the surfaces are
covered within each structure and Test for MMO (Mixed Metal Oxide, Platinum) probe type
anodes, ensure the continuity with connector bars.
Period:
Aug 2010 to
May 2011
Company : VELOSI LLC, ABU DHABI UAE
Position : Sr. QC Inspector E&I - TPI/Dolphin Energy
Project : a). 48’’x243km, Taweelah to Fujairah down Stream Gas Pipeline
Job Responsibilities :  Ensured that all activities assigned compliance with DEL project Spec's and during
inspections follows the IFC, AFC, P&ID, hook-up, typical installation details, logic diagram,
Cause & effect diagrams and QC procedures, Inspection plans and carried out as per planned
schedule to achieve on target dates.
 Responsible to review contractor submittals ITP, QCP, QCF, MST, related QC documents
and make ensure that all Inspections being carried out as per approved documents.
 Responsible for installation inspections, testing of LV Switchgear, 415V motor control center,
RMU units, power transformers, distribution boards, Solar system, power, control,
Instrumentation cables laying, glanding, termination, lighting system, HVAC & Earthing
system, Lightning protection system.
 Involved in swing potential test and Natural potential survey for underground gas pipeline.
 Supervised, witnessed CIP & DCVG (DC voltage gradient) Survey for 48’' U/G gas pipeline.
 Inspection for FOC laying in desert and mountain area using Blowing Method (with Jet
machine and Air compressor)
 Installation of MMO Piggy back anode, Mg Anode, Big Fink, CMTP, CTP, PCR, AJB, NJB,
STP, CPTR, EBB, Zinc ribbon anode, Surge Diverters, Pin Brazing welding.
 Material Receiving & Witnessed test for Submarine Composite Cables 6.6/11kv, Overall
dimension check, Conductor Screen, Inner Layer and Outer Sheath thickness and Serving
check, Water Blocking Tape check, Conductor Sheath and Anti-Corrosion Sheath check, Anti-
Teredo Protection Test (No of copper tape, copper tape thickness and overlapping check),
Inner Sheath / Bedding, Bitumen check, Armour Check and Binder Tape check, Filler,
Insulated steel fillers, diameter check over the insulation, steel rope and no of wire check.
 Performed and witnessed Power Frequency voltage test withstand 23KV/5minuts, Insulation
resistance test after and before of HV test, Conductor DC resistance measurement test,
measured the resistance corrected to at temperature @ 20degC, Metallic Screen DC
resistance test, Capacitance Measurement test
 Fibber Optic Cable Test; Non Electric Test, Visual check, overall dimension check, outer

7. DNVGL/CV/FORMAT/VER-2.0-07/2015/MSA 7
Insulation thickness check.
 Witnessed attenuation test 1310nm and 1550nm, OTDR (Optical time domain reflector) test,
end to end test and Splicing with fusion arc splicer.
Period:
May 2007 to
Aug 2010
Company : TEKFEN CONSTRUCTION Co. QATAR
Position : QA/QC Engineer E&I
Projects : a). (GTC06/190/ED) 20’’x81km, A/G Crude Oil pipeline Umm-bab to Um-Messaieed tank farm
b). GTC05/124/ED (24’’/20”x120km), U/G Ras Laffan to Messaieed Gas transmission line
c). GTC05/124/ED VTC#2 (6’’x32km), U/G LPG Messaieed Refinery to Doha bottling Plant
Job Responsibilities :  Responsible to conduct Installation inspections, surveillance, testing, mechanical completion
on following systems, power transformers (Up to 12.5/10 MVA), 33/11kv GIS (GM6), 6.6kv
(Metal Clad) Switchgears, SB, MCC control panels, JB, marshalling boxes, RCU, UCP,
Motors, Diesel Generator (Rated 10KVA), Nitrogen Generators (5.5kva), RTU system, Heat
tracing system, Ethane Gas compressors including lube Oil & Fin Fan coolers system, FOC &
telecom system, UPS’s & "TPR" Battery chargers, lighting, Earthing & Lightning.
 Control Valve, GLV, BFV, BD, MOV, ESD Valves and Magnetic Flow, Ultrasonic & Orifice
Flow meters, FT, PT, Transmitters, Gauges and Local Gauge Control panel as well as other
measuring Instruments.
 Responsible for Inspections field work according with ITP, generating punch lists, making final
inspection reports for various E & I works, loop folder preparation.
 Executes the specific, critical inspections on materials, equipment, construction, installation
activities on site, Inspection of Incoming materials, vendor package receiving
 Review of vender documents, test procedure, IRC certificates, operating manuals, design
book, engineering data book in accordance with the project design basis and specification.
Period:
Aug 2006 to
May 2007
Company : SAUDI BIN LADIN - PIC DIVISION, KSA
Position : QC Inspector Electrical
Project : a). PPLC; Product Pipe Line Corridor Phase-I
Job Responsibilities :  Contract job order review, preparation of Job quality plan and preparation of project specific
procedures, work instructions, QC procedures and method of statement, check lists,
calibration sheets and QC plans as required.
 Participated in creation, Implementation of project quality plans, procedures, work
Instructions, quality records, punch lists and compilation of test packs.
 Verified compliance of performance output, identification of non-conformances for corrective
action and issue of NCRs whenever required.
 Responsible for Inspections field work according with ITP, generating punch lists, making final
inspection reports for various E&I works, loop folder preparation.
 Equipment testing for LV & HV switchboards like CT, PT, MV drop, bus ducts and electro
mechanical relays, breakers, feeder differential and simulation tests.
Period:
Feb 2004 to
July 2006
Company : CPECC - TECHNO Consortium, PAK
Position : QC Inspector E&I
Project : a). 26” White Oil, 850 Km Pipeline+4 Pumping terminal Stations
b). OGDCL Project, Oil & Gas Development Sector-I
Job Responsibilities  Inspections, Installations and preparation of QCF test reports according with ITP for various
activities, loop folder preparation for daily loop checking.
 Installation & testing of F&G system including detectors GDT's, FDI's, HD, SD, HSSD, FACP,
Inergen and MCL alarming system according to cause & effect matrix.
 Worked on Communication systems (CCTV, PAGA, Data, Voice), Analyzers, Compressor
Skids, Pump Motor Controls, Machine Control Monitoring System (MCMS), Monitoring System
(CEMS), Catalyst & Spent Caustic treatment skids.
 Possesses sound command on Pneumatic & Electronic Instruments, Differential Pressure,
Level, Temperature, Flow Transmitters, Control Valves, Pressure, Temperature, Flow & Level
Switches, Turbine, Magnetic & Vortex flow meter.

8. DNVGL/CV/FORMAT/VER-2.0-07/2015/MSA 8
 Cathodic protection Controller test, potential measurement Swing test, line current
measurement for 26’’x850km U/G pipeline project.
 Command to work on PLC & DCS performed loop checking, Cause & Effect, Loop
modification and trouble shooting on PLC (Allen Bradley) and DCS (ABB Advent OCS,
Honeywell, ABB, Honeywell & Yokogawa Centum XL DCS) system instruments.
 Trouble shooting & Calibration of Temperature, Pressure, Magnetic Flow, Ultrasonic, Orifice
Flow meters, PT, Level Transmitters (Rosemount, Fisher, ABB, Honeywell)
 Control Valves, Shutdown, Shutoff Valves, BD Valves (Arca, Honeywell, Masolenan, Xomox,
Flow serve, Rotork)
Period:
Jan 2001 to
Dec 2003
Company : LESCO/WAPDA - (GSC) Division, PAK
Position : Line Superintendent Const. Grade-I
Project : a) 132/33/11kv Sub Stations, HT/LT Transmission lines & Electricity
Job Responsibilities :  Responsible for end to end line feeder planning and execution, Erection of HT/LT 132kv, 33kv
and 11kv transmission lines and distribution system works.
 Handling the project estimation, monitoring, execution of overhead, underground transmission
HT/LT line as per Project requirement.
 Marking the substation layout and foundation marking of Substation equipment’s like GA, LA,
Isolator, CVT, CT, breakers, post insulators, power transformer, and tower gantries, light
mask, cable trench, ear thing, lighting system etc.
 Responsible and supervision for laying, termination of HV, MV, LV and control cables from
SWGR, Control Panels end to field equipment’s like Power Transformers, Current
Transformers (CT’s), Voltage Transformers (VT’s), Motor Operated Isolators, Capacitor Bank,
Capacitor bank Reactors, Capacitor voltage Transformer and MCCB Breakers.
 Supervised Erection & Start up, Control Auxiliaries for Heavy-duty Gas Turbine Generators
(Rated 1.1 to 22.4MW), 13.8/11kv Vacuum, 33kv GIS, 6.6kv Metal Clad switchgear, 415V LV
MCC’s, PCC’s and power transformers.
 Responsible for replacing the old ASEA distance relays with new numerical line differential &
distance relays.
References : References will be furnished on demand