SlideShare a Scribd company logo
1 of 5
SENIOR PROCESS OPERATOR
Chemical Engineering Senior Technician
Lakhdar Mekki
48 years’ old
Married 4 kids
Algerian
Doha, Qatar
Cell: +974 33649144
E-mail: khemistimekki@yahoo.fr
Objective
Challenging and rewarding position as a panel operator or supervisor, with an
opportunity for challenge and personal growth.
Summary of Achievements
 Senior process Operator is my job,
 I work in LNG train (QATARGAS 1).
 Assisted shut down, start up for the LNG plant.
 Assisted commissioning and start up for first LPG plant in Algeria with DCS.
 Assisted commissioning and star up for condensate recovery unit (condensate
storage).
 Excellent analytical, communication, and abilities to work in a multinational
environment with wide exposure to various cultures and customs.
 Computer literate, familiar with MS Office (Word, Excel, Power point & outlook
express.)
 Well versed with Permit to Work (PTW) system, Standard Operating Procedures
(SOP), Job Safety and Job Hazard Analysis followed in the International Project
Sites.
 Knowledge procedures in LPG production (commissioning, shut down, startup)
 Knowledge procedures in Condensate Storage (commissioning, shut down,
startup)
 Knowledge procedures in LNG production (shut down, startup)
 Large practical experience in safety rules and prevention in industrial
environment
Competence
 Cryogenic Process
 LNG Train start-up & shut-down
 LPG Plant star-up & shut-down
Experience
 From 1997-2004 rover operator in LPG plant. “Sonatrach” Algeria
 2004 – 2009 Senior Operator LPG plant “Sonatrach” Algeria
 From 2009 to 2010 panel operator in LPG plant “Sonatrach” Algeria
 Since 2010 up to2013 rover Operator LNG process “Qatar gas” Qatar.
 Since 2013 up to date senior operator
i
During this period as a senior operator my job was:
-General check in the plant
-Check the quality of the work done by the maintenance team
-Coordinate with supervisor and panel operator
-Prepare and coordinate with rover operators for any shut down for maintenance
-Daily report for Supervisor
 1997 – 2004 Rover Operator LPG plant “Sonatrach” Algeria.
During this period my job was following and checking different part of plant such as:
-Pumps suction and discharge pressure
-Vessels and column level gage and manometers (PG, TG)
-Compressor auxiliary pumps, pressure differential of oil filter.
-Check inside MARK V if is there any alarms
-Waiting call from control room for special task
-Log sheet parameters each two ours
Work and responsibility
Safety Management
 Understand, operate and comply with the Company’s Safe Work Permit and Safe
working practices.
 Ensure that all process and related equipment available for operational use
complies with the Company’s Safety policy
 Safe and efficient operation of safety devices, gas detection systems, process
control systems, Gas meters, alarm systems, communication systems, safety
systems, fire suppression systems.
 Conversant on the safe work permit system for activities in the plant and ensure
strict enforcement of rules as described in the safe work permit procedures and
protocol.
 Second or third signatory on all types of work permits being responsible for listing
all safety and Environmental precautions and monitoring progress of work.
Process
 Monitors and coordinates the designated operation from Control Panel, ensuring
safe and efficient operations.
 Monitors the process alarms, the operation of the designated area and
coordinates process activities according to instructions received and production
requirements.
 Includes continuous monitoring of instruments and equipment, making field
adjustments according to process parameters as required
 Maintains continuous radio contact with Senior and Panel Operator to keep them
informed of operating conditions to request manual adjustments of equipment, to
carry out on-site readings and convey instructions given by Shift Supervisor.
 Maintains continuous liaison with Panel Operator to coordinate the required
supplies according to production conditions, alters operating conditions or
product flows to allow prior isolation of equipment for maintenance and re-start
operations according to procedures, following completion of maintenance.
 keeps aware of ongoing maintenance work by reviewing permit to work
records/logbooks.
 Communicates with the Panel Operator of other areas to coordinate operations
that may affect the operation and/or production of any unit within the Plant.
Includes informing each other of changes and synchronizing activities to
minimize loss of production.
 Determines developing trends in operating conditions, reporting significant
changes and initiating action as required.
 Adept in controlling and monitoring of Plant Process Operations over Distributed
Control System DCS (EMERSSON, YOKOGAWA) & UCP Control Panels.
 Handling of Emergencies of different natures like power failures, utility failures,
fire accidents, Equipment break down etc.
 Execute good troubleshooting skills during plant’s upsets and shutdowns
 Operates and controls: High pressure Gas Compressors, Expanders, Pumps,
Gas turbines, Heaters and Coolers.
 Oversee and assist in start-up of the Gas processing plant after planned and
unplanned shutdowns.
 Isolation/De-Isolation of mechanical rotating machine to make them available for
maintenance work. Lock-out/ Rack-Out of plants equipment’s for preventive
maintenance.
 Prepare equipment for maintenance as per safe work agreements
 Log all relevant data relating to the production of hydrocarbons and prepares
daily reports during shutdown
 Coordinate with maintenance department for efficient and timely scheduling of
work and ensure the work is carried out safely in accordance with work permit.
 Ensures smooth hand over/take over in shift end.
 Assisted in functional operability test for all rotating equipment’s & checking
emergency shutdown systems with shutdown panel.
Emergency Response Team
 Execute company’s Emergency Response procedures and their application in an
emergency as defined in the company’s Emergency Response Manual.
 Execute proper procedure and response during Poisonous / Hazardous gas
leakage, gas alarms, gas detection, fire and emergency shutdown.
 Actively involved in the site emergency exercises with the objective of containing
situations based on the priorities of people, assets, environment and production
Area of Responsibilities (Handle and Operate)
 Natural Gas Liquefaction Process.
 Acide Gas Removal Unit
 Gas Dehydration Unit
 LPG Recovery Unit
 NGL Extraction & Fractionation Unit
 Propane Refrigeration Unit
 LPG Sour Gas Treating Unit (Shell's Technology)
 Regeneration Systems for sulfinol
 Condensate Recovery Unit
 Utilities, Flare and Drain System
 FOPAM (Field operator monitoring) workshop
Rotary & static equipment’s handled
 Centrifugal Compressor driven by Gas-Turbine (Nuevo pignone & GE).
 Compander, Turbo Expander /Compressor (Mafi trench).
 Centrifugal and Axial Pumps.
 Cryogenic & Hot pumps.
 hydraulicTurbine.
 Furnace
 Distillation Columns.
Education & Certificates
 Senior Technician “Chemical Engineering option LNG” Algerian Petroleum
Institute
Technical Knowledge’s
 Firefighting, Fire Prevention & First aid.
 IIF “incident and injury free”.
 Permit to Work, AGTand Confined space entry.
 GE gas turbine training.
 AP-C3MR LNG liquefaction.
 Vibration Monitoring Training.
 CCC and ccc++ controller’s
 APCI training
 Breathing Apparatus & H2S escape.
 Defensive Driving.
 Handling Material.
 First aid.
 Waste Management.
 Hazard Recognition Tool
 Isolation & De-isolation of low voltage electrical motor.
 Computer skills “MS office (word, excel, power point) & outlook”
Languages
Good knowledge for English, French and Arabic “both written and spoken”
Interests
Travel, Sport & Contemporary History.

More Related Content

What's hot

RESUME new updated Aug. 2015
RESUME new updated Aug. 2015RESUME new updated Aug. 2015
RESUME new updated Aug. 2015Leo Magro
 
Pharmaceutical Company Facility Presentation
Pharmaceutical Company Facility PresentationPharmaceutical Company Facility Presentation
Pharmaceutical Company Facility PresentationPalash Das
 
Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...
Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...
Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...Flevy.com Best Practices
 
CF Regional Conference PPT template - Lillie
CF Regional Conference PPT template - LillieCF Regional Conference PPT template - Lillie
CF Regional Conference PPT template - LillieDoug Lillie, CIRO
 
Qualification of analytical instruments
Qualification of analytical instrumentsQualification of analytical instruments
Qualification of analytical instrumentsSanathoiba Singha
 
Duties & responsibility
Duties & responsibilityDuties & responsibility
Duties & responsibilityZaw Min
 
Continuos and batch process
Continuos and batch processContinuos and batch process
Continuos and batch processSadiq Rahim
 
Technology transfer from Research and development to production
Technology transfer from Research and development  to productionTechnology transfer from Research and development  to production
Technology transfer from Research and development to productionArchana Mandava
 
Pilot scaleuptechnique
Pilot scaleuptechniquePilot scaleuptechnique
Pilot scaleuptechniquejiten patel
 
LEAN Setup Reduction (SMED) training for welding by JULIAN KALAC
LEAN Setup Reduction (SMED) training for welding by JULIAN KALACLEAN Setup Reduction (SMED) training for welding by JULIAN KALAC
LEAN Setup Reduction (SMED) training for welding by JULIAN KALACJulian Kalac P.Eng
 
Mohd Mustaque Alam Instrument Supervisor..
Mohd Mustaque Alam Instrument Supervisor..Mohd Mustaque Alam Instrument Supervisor..
Mohd Mustaque Alam Instrument Supervisor..mohammed mustaque Alam
 

What's hot (19)

ralph
ralphralph
ralph
 
RESUME new updated Aug. 2015
RESUME new updated Aug. 2015RESUME new updated Aug. 2015
RESUME new updated Aug. 2015
 
Pharmaceutical Company Facility Presentation
Pharmaceutical Company Facility PresentationPharmaceutical Company Facility Presentation
Pharmaceutical Company Facility Presentation
 
4 validation jntu pharmacy
4 validation jntu pharmacy4 validation jntu pharmacy
4 validation jntu pharmacy
 
Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...
Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...
Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...
 
ROBERT RESUME
ROBERT RESUMEROBERT RESUME
ROBERT RESUME
 
M ZAIDI resume 2015
M ZAIDI resume 2015M ZAIDI resume 2015
M ZAIDI resume 2015
 
Smed simulation game_intro
Smed simulation game_introSmed simulation game_intro
Smed simulation game_intro
 
CF Regional Conference PPT template - Lillie
CF Regional Conference PPT template - LillieCF Regional Conference PPT template - Lillie
CF Regional Conference PPT template - Lillie
 
Qualification of analytical instruments
Qualification of analytical instrumentsQualification of analytical instruments
Qualification of analytical instruments
 
Duties & responsibility
Duties & responsibilityDuties & responsibility
Duties & responsibility
 
Osama's_CV
Osama's_CVOsama's_CV
Osama's_CV
 
Continuos and batch process
Continuos and batch processContinuos and batch process
Continuos and batch process
 
Technology transfer from Research and development to production
Technology transfer from Research and development  to productionTechnology transfer from Research and development  to production
Technology transfer from Research and development to production
 
Pilot scaleuptechnique
Pilot scaleuptechniquePilot scaleuptechnique
Pilot scaleuptechnique
 
010 bmw tpm management training
010 bmw tpm management training010 bmw tpm management training
010 bmw tpm management training
 
Spray equipment calibration pest & weed
Spray equipment calibration pest & weedSpray equipment calibration pest & weed
Spray equipment calibration pest & weed
 
LEAN Setup Reduction (SMED) training for welding by JULIAN KALAC
LEAN Setup Reduction (SMED) training for welding by JULIAN KALACLEAN Setup Reduction (SMED) training for welding by JULIAN KALAC
LEAN Setup Reduction (SMED) training for welding by JULIAN KALAC
 
Mohd Mustaque Alam Instrument Supervisor..
Mohd Mustaque Alam Instrument Supervisor..Mohd Mustaque Alam Instrument Supervisor..
Mohd Mustaque Alam Instrument Supervisor..
 

Viewers also liked

Viewers also liked (7)

Testimonial
TestimonialTestimonial
Testimonial
 
Media flowchart
Media flowchartMedia flowchart
Media flowchart
 
Certification of Employment_Edde Enovani Iwo
Certification of Employment_Edde Enovani IwoCertification of Employment_Edde Enovani Iwo
Certification of Employment_Edde Enovani Iwo
 
Cv ayman elkassaby 2016
Cv ayman elkassaby 2016Cv ayman elkassaby 2016
Cv ayman elkassaby 2016
 
Bio erleben 2009 bis 2013
Bio erleben 2009 bis 2013 Bio erleben 2009 bis 2013
Bio erleben 2009 bis 2013
 
Baskar_Resume
Baskar_ResumeBaskar_Resume
Baskar_Resume
 
Cv ayman elkassaby 2016
Cv ayman elkassaby 2016Cv ayman elkassaby 2016
Cv ayman elkassaby 2016
 

Similar to Senior Process Operator with 48 Years' Experience in LNG and LPG Plants

Similar to Senior Process Operator with 48 Years' Experience in LNG and LPG Plants (20)

afri-cv
afri-cvafri-cv
afri-cv
 
MANIKANDAN KOTHANDAN_original
MANIKANDAN KOTHANDAN_originalMANIKANDAN KOTHANDAN_original
MANIKANDAN KOTHANDAN_original
 
Chirag darji resume for production operator (oil & gas)
Chirag darji resume for production operator (oil & gas)Chirag darji resume for production operator (oil & gas)
Chirag darji resume for production operator (oil & gas)
 
RASHID JALAL CV 1512
RASHID JALAL CV 1512RASHID JALAL CV 1512
RASHID JALAL CV 1512
 
Waleed CV
Waleed CVWaleed CV
Waleed CV
 
CV Oil and Gas Field Operator Nishanth P Joy
CV Oil and Gas Field Operator Nishanth P JoyCV Oil and Gas Field Operator Nishanth P Joy
CV Oil and Gas Field Operator Nishanth P Joy
 
Irfan Qamar Cv
Irfan Qamar CvIrfan Qamar Cv
Irfan Qamar Cv
 
Tankfarm terminal operator
Tankfarm  terminal operatorTankfarm  terminal operator
Tankfarm terminal operator
 
pavan_DCS
pavan_DCSpavan_DCS
pavan_DCS
 
ramshad process
ramshad processramshad process
ramshad process
 
Instrument Supervisor
Instrument SupervisorInstrument Supervisor
Instrument Supervisor
 
Elrique Mckay - CV 2016
Elrique Mckay - CV 2016Elrique Mckay - CV 2016
Elrique Mckay - CV 2016
 
Updated CV
Updated CVUpdated CV
Updated CV
 
sengu cv
sengu cvsengu cv
sengu cv
 
John Paulo S. Mallorca 1
John Paulo S. Mallorca 1John Paulo S. Mallorca 1
John Paulo S. Mallorca 1
 
Resume Rakesh Naik
Resume Rakesh NaikResume Rakesh Naik
Resume Rakesh Naik
 
M.Yesrub Iqbal
M.Yesrub IqbalM.Yesrub Iqbal
M.Yesrub Iqbal
 
CV (EVTL)
CV (EVTL)CV (EVTL)
CV (EVTL)
 
Matt Instr CV
Matt Instr CVMatt Instr CV
Matt Instr CV
 
Jean Claude MBOUNGOU ENGLISH CV
Jean Claude MBOUNGOU ENGLISH CVJean Claude MBOUNGOU ENGLISH CV
Jean Claude MBOUNGOU ENGLISH CV
 

Senior Process Operator with 48 Years' Experience in LNG and LPG Plants

  • 1. SENIOR PROCESS OPERATOR Chemical Engineering Senior Technician Lakhdar Mekki 48 years’ old Married 4 kids Algerian Doha, Qatar Cell: +974 33649144 E-mail: khemistimekki@yahoo.fr Objective Challenging and rewarding position as a panel operator or supervisor, with an opportunity for challenge and personal growth. Summary of Achievements  Senior process Operator is my job,  I work in LNG train (QATARGAS 1).  Assisted shut down, start up for the LNG plant.  Assisted commissioning and start up for first LPG plant in Algeria with DCS.  Assisted commissioning and star up for condensate recovery unit (condensate storage).  Excellent analytical, communication, and abilities to work in a multinational environment with wide exposure to various cultures and customs.  Computer literate, familiar with MS Office (Word, Excel, Power point & outlook express.)  Well versed with Permit to Work (PTW) system, Standard Operating Procedures (SOP), Job Safety and Job Hazard Analysis followed in the International Project Sites.  Knowledge procedures in LPG production (commissioning, shut down, startup)  Knowledge procedures in Condensate Storage (commissioning, shut down, startup)  Knowledge procedures in LNG production (shut down, startup)  Large practical experience in safety rules and prevention in industrial environment Competence
  • 2.  Cryogenic Process  LNG Train start-up & shut-down  LPG Plant star-up & shut-down Experience  From 1997-2004 rover operator in LPG plant. “Sonatrach” Algeria  2004 – 2009 Senior Operator LPG plant “Sonatrach” Algeria  From 2009 to 2010 panel operator in LPG plant “Sonatrach” Algeria  Since 2010 up to2013 rover Operator LNG process “Qatar gas” Qatar.  Since 2013 up to date senior operator i During this period as a senior operator my job was: -General check in the plant -Check the quality of the work done by the maintenance team -Coordinate with supervisor and panel operator -Prepare and coordinate with rover operators for any shut down for maintenance -Daily report for Supervisor  1997 – 2004 Rover Operator LPG plant “Sonatrach” Algeria. During this period my job was following and checking different part of plant such as: -Pumps suction and discharge pressure -Vessels and column level gage and manometers (PG, TG) -Compressor auxiliary pumps, pressure differential of oil filter. -Check inside MARK V if is there any alarms -Waiting call from control room for special task -Log sheet parameters each two ours Work and responsibility Safety Management  Understand, operate and comply with the Company’s Safe Work Permit and Safe working practices.  Ensure that all process and related equipment available for operational use complies with the Company’s Safety policy  Safe and efficient operation of safety devices, gas detection systems, process control systems, Gas meters, alarm systems, communication systems, safety systems, fire suppression systems.
  • 3.  Conversant on the safe work permit system for activities in the plant and ensure strict enforcement of rules as described in the safe work permit procedures and protocol.  Second or third signatory on all types of work permits being responsible for listing all safety and Environmental precautions and monitoring progress of work. Process  Monitors and coordinates the designated operation from Control Panel, ensuring safe and efficient operations.  Monitors the process alarms, the operation of the designated area and coordinates process activities according to instructions received and production requirements.  Includes continuous monitoring of instruments and equipment, making field adjustments according to process parameters as required  Maintains continuous radio contact with Senior and Panel Operator to keep them informed of operating conditions to request manual adjustments of equipment, to carry out on-site readings and convey instructions given by Shift Supervisor.  Maintains continuous liaison with Panel Operator to coordinate the required supplies according to production conditions, alters operating conditions or product flows to allow prior isolation of equipment for maintenance and re-start operations according to procedures, following completion of maintenance.  keeps aware of ongoing maintenance work by reviewing permit to work records/logbooks.  Communicates with the Panel Operator of other areas to coordinate operations that may affect the operation and/or production of any unit within the Plant. Includes informing each other of changes and synchronizing activities to minimize loss of production.  Determines developing trends in operating conditions, reporting significant changes and initiating action as required.  Adept in controlling and monitoring of Plant Process Operations over Distributed Control System DCS (EMERSSON, YOKOGAWA) & UCP Control Panels.  Handling of Emergencies of different natures like power failures, utility failures, fire accidents, Equipment break down etc.  Execute good troubleshooting skills during plant’s upsets and shutdowns  Operates and controls: High pressure Gas Compressors, Expanders, Pumps, Gas turbines, Heaters and Coolers.  Oversee and assist in start-up of the Gas processing plant after planned and unplanned shutdowns.  Isolation/De-Isolation of mechanical rotating machine to make them available for maintenance work. Lock-out/ Rack-Out of plants equipment’s for preventive maintenance.  Prepare equipment for maintenance as per safe work agreements  Log all relevant data relating to the production of hydrocarbons and prepares daily reports during shutdown
  • 4.  Coordinate with maintenance department for efficient and timely scheduling of work and ensure the work is carried out safely in accordance with work permit.  Ensures smooth hand over/take over in shift end.  Assisted in functional operability test for all rotating equipment’s & checking emergency shutdown systems with shutdown panel. Emergency Response Team  Execute company’s Emergency Response procedures and their application in an emergency as defined in the company’s Emergency Response Manual.  Execute proper procedure and response during Poisonous / Hazardous gas leakage, gas alarms, gas detection, fire and emergency shutdown.  Actively involved in the site emergency exercises with the objective of containing situations based on the priorities of people, assets, environment and production Area of Responsibilities (Handle and Operate)  Natural Gas Liquefaction Process.  Acide Gas Removal Unit  Gas Dehydration Unit  LPG Recovery Unit  NGL Extraction & Fractionation Unit  Propane Refrigeration Unit  LPG Sour Gas Treating Unit (Shell's Technology)  Regeneration Systems for sulfinol  Condensate Recovery Unit  Utilities, Flare and Drain System  FOPAM (Field operator monitoring) workshop Rotary & static equipment’s handled  Centrifugal Compressor driven by Gas-Turbine (Nuevo pignone & GE).  Compander, Turbo Expander /Compressor (Mafi trench).  Centrifugal and Axial Pumps.  Cryogenic & Hot pumps.  hydraulicTurbine.  Furnace  Distillation Columns. Education & Certificates  Senior Technician “Chemical Engineering option LNG” Algerian Petroleum Institute
  • 5. Technical Knowledge’s  Firefighting, Fire Prevention & First aid.  IIF “incident and injury free”.  Permit to Work, AGTand Confined space entry.  GE gas turbine training.  AP-C3MR LNG liquefaction.  Vibration Monitoring Training.  CCC and ccc++ controller’s  APCI training  Breathing Apparatus & H2S escape.  Defensive Driving.  Handling Material.  First aid.  Waste Management.  Hazard Recognition Tool  Isolation & De-isolation of low voltage electrical motor.  Computer skills “MS office (word, excel, power point) & outlook” Languages Good knowledge for English, French and Arabic “both written and spoken” Interests Travel, Sport & Contemporary History.