1. Curriculum Vitae
Name: S.Kalimuthu
MOBILE:+91 8939476018
E-Mail: kalimuthube@rediffmail.com
Sykpe ID: kalimuthu.selvaraj
Address
No – 1/20, Mettu street,
Seneer Kuppam,
Poonamalli
Chennai-600056,
Tamil Nadu, India.
Carrier abridgement
Welding Engineer over 10 years of experience in Quality Management, Welding Engineering & NDT.
Have good knowledge in DIN EN ISO, ASME and AWS welding standards.
EDUCATIONAL QUALIFICATION
• B.E Mechanical. From Anna university, Chennai. Year of Pass: May -2005.
• P.G Diploma in Welding Engineering and Technology, From Annamalai University,
• International Welding Technologist (IWT) Diploma from IIW, Certificate Number: IN/IWT/51400728
• CSWIP 3.1 -Welding Inspector from The welding Institute. U.K. Certificate Number:84941,
• Currently doing International Welding Engineer (IWE) in IIW.
• Level II in VT, PT, UT, PT, & RT as per ASNT SNT TC 1A. ( Having good practical knowledge in this
NDT methods)
FAMILIAR INTERNATIONAL STANDARDS
• ASME sec II-A, B, C , Sec VIII Div 1, Sec IX and ASME B 31.1, 31.3, B 16.5, B16.10, B16.11. Etc.
• ISO 3834-2, ISO 15614-1, ISO 15613, ISO 9606-1, ISO 14732, ISO 5817, ISO 17637, ISO 17636, ISO
17640, ISO 23277, ISO 10675, ISO 11666, etc.
• AWS D1.1, AWS D1.2, AWS D1.3, AWS D1.6.
• Australian Standard- AS/NZS 1554.1, 1554.
2. INTERNATIONAL VISITS
• Visited M/s Terex Fuchs- Germany. For studying manufacturing process and welding requirements
of boom & Jib. Duration : 02.03.11 to 09.03.11
• Visited M/s Peiner Smag Lifting technology - Germany. For studying manufacturing process and
welding requirements of Graps. Duration : 02.08.14 to 21.08.14
ACHIEVEMENTS
• As a In charge I Developed, Implemented and passed audit of ASME U Stamp certification for M/s
United Motors and Heavy Equipment Pvt Ltd, in the year of 2011.
• As a In charge I Developed, Implemented and passed audit of ISO 3834-2, ISO 1090-2 for M/s Peiner
Smag Machinery (India) Private Limited. In the year of 2014.Award received from the
company for this achievement.
• Between the year 2008 to 2009 I have been recruited, trained and qualified over 100 for M/s United
Motors and Heavy Equipment Pvt Ltd. This company started from green field.
• I have been conducted welder qualification test for more than 400 welders as per national standards
ASME Sec IX, AWS D1.1, WAS D1.3, ISO 9606-1, ISO 14732
• Maintaining high level of weld quality and documentation in our shop. This was appreciated by ISO
auditors, and our customers SANDVIK Finland, JCB India, etc.
• I have prepared, tested and certified 70 WPS for low carbon steel, low alloy steel, Q&T steel,
Stainless steel, Duplex steel, Hard facing welding and Sheet metal welding. And 8 WPS for Automatic
Process (Robotic welding) based on national standards ASME sec IX, WAS D1.1, AWS D1.3, ISO 15614,
ISO 15613. Process details as follows.
Welding process Base materials Filler materials
MMA SA516 Gr 70, SA 106 Gr B, A 36,
SAILMA 350HI, SAILMA 450HI, A36,
S355J2+N, BISALLOY-80, S690QL,
• E7018
• E8018-B2, E8018-G
• E11018-M
TIG SA516 Gr 70, SA 106 Gr B , IS 2062 E
350, SA790 Gr S2205,
SA240 TP 304, 316L.
• ER70S-2
• ER2209
• ER316L
GMAW SA516 Gr 70, SA 106 Gr B, A 36, A240
TP 304, 316L. SAILMA 350HI, A36,
S355J2+N, BISALLOY-80, S690QL,
HARDOX 400, IS 2062 E350.
• ER70S-6
• ER309-L
FCAW SAILMA 350HI, A36, S355J2+N,
BISALLOY-80, S690QL, HARDOX
400BISALLOY-80, S690QL, HARDOX
400
• E111T1-K3MJH4
• E71T-1
SAW S355J2+N, HARDOX 400 • EN ISO 14171-A-S 2
(WAS A 5.17 :EM12)
3. 30.06.13 TO Till date: PEINER SMAG MACHINERY (INDIA) PRIVATE LIMITED. Ranipet - India.
Company profile:
M/s Peiner Smag Machinery (India) Private limited is a Germany Based MNC. They are
the manufacturer of Material handling equipment’s, Like Grabs, Spreaders. They are ISO 1090-2, ISO
3834-2, and ISO 9001 Certified Company.
Designation : Senior Engineer- Welding & Fabrication Quality.
Responsibility: HOD welding department.
Details of Responsibility:
• Heading Welding & Fabrication Quality.
• Leading a team of Three Welding Supervisors, Two Welding Inspectors, and Two NDT inspectors.
• Responsible for Implementation and Maintaining ISO 3834-2 and ISO 1090-2 system.
16.06.08 TO 20.06.13: UNITED MOTORS & HEAVY EQUIPMENT PVT.LTD, Bangalore-India
Company profile:
M/s United Motors and Heavy Equipment is a ISO 9001, ISO 14001,ISO 18001 and ASME
U stamp Certified Company. They are the manufacturer of Mining & Earth moving Equipment’s,
Defence equipment’s, Pressure Vessels and piping components.
Designation : Senior Welding Engineer.
Details of Responsibility:
• Heading welding & NDT activities.
• Leading a team of six QC inspectors, two welding inspectors, and two NDT inspectors.
• Process Development of new components.
• Co-ordination for ISO 9001, ISO 14001, ISO 18001 audit, Customer audit and ASME U audit.
• Handling customer complaints, Maintaining NCR logs and preparing 8D reports, CAPA reports,
FMEA reports, Root cause analysis.
06.07.05 TO 11.06.08: VKN ENTERPRISES. Trichy-India
Company profile:
4. M/s VKN Enterprises is a Fabricator of conical towers to wind mills and all boiler
fabricated structures.
Designation : Quality control Engineer.
Details of Responsibility:
• Performing weld visual test, PT, MPT, UT and RTFI.
• Activities on Marking and repairing of RT, UT weld defects.
• Performing Welder Qualification test.
• Conducting PQR welding.
• Inspection of heavy beams, columns, light and medium structures, pipes, pipe supports based on
written procedures and project specifications.
• Participating Customers periodic audits.
• Performing surface preparation and painting inspection.
• Coordination for third party, Customer inspection.
• Monitoring electrode Baking Oven.
• Verification of Raw material TC.
• Review of Heat treatment Chart. Etc.
Personal Details:
Date of Birth & Age : 04.04.1984 & 31 years.
Marital status : Married
Language known : English, Hindi, Kannada, Tamil.
Passport No : G3044135
Current CTC : 9 LPA
Notice Period : 1 Months.
Declaration
I certify that the above particulars of my resume are true to the best of my knowledge.
Yours faithfully
S.KALIMUTHU
5. Resume Annexture-1
WORK EXPERIENCE
• Preparation of WPS, PQR, WPQ, and Weld plan, NDT Plan, etc.
• Selection of NDT method and Preparation of NDT procedures.
• Preparation of QAP, ITP, and PPAP documents, 8D reports, Quality procedures, Work
Instruction, Process flow diagram.
• Review of technical requirements for new projects.
• Design and development of welding positioners and fixtures.
• Preparation of welding sequence plan to reduce welding distortion, Planning of Temporary
stiffener.
• Controlling various welding defects by root cause analysis and preparing CAPA and welding
repair procedures.
• Training, Qualification Welders and welding operators
• Monitoring and controlling of Welders and welding operators’ performance.
• Maintaining welders continuity record. Preparation of welders skill matrix and assist HR for
appraisal
• Estimation of welding consumables and control of consumables.
• Selection, Testing and approval of welding consumables as per ASME Sec II Part C.
• Control and monitoring of Post-weld Heat Treatment activities.
• Raw material inspection & TC verification.
• Performing Visual Testing, DPT, MPT, UT and preparation on reports.
• RT film interpretation
• Conducting training programme for Welding supervisors, NDT inspectors, welders, Fitters
• Witness & Review of Bend test, Tensile Test, Impact Test, Hardness test, Chemical analysis and
Macro Examinations.
• Maintaining calibration certificates of welding machine, NDT equipment’s, Temperature
measuring instruments, Electrode baking oven, Gas flow meters and other measuring
equipment’s.
• Monitoring gas purity and Electrode Baking oven.
