1. YOGENDRASINGH KUSHWAH
Certified Welding Inspector ( AWS ) Certificate No.: 08112781
Mobile: +62-8117722783, +91- 9879996770, +628 9651797675
E-mail: yskushwah16@gmail.com
Career objective
To apply my skills and competencies to gain professional expertise and to implement my practical aspects in
an organization by contributing to my share of efforts. I would like to aspire a professional career that will
provide me growth opportunities, acquiring knowledge and suitable reward to my skill.
Personal Details
Address : B/13, Nikita Park Society, Nr. Gebaldas Bus-stand, Isanpur-Vatva Road,
Isanpur, Ahmedabad – 382443.
Date of Birth : 16th
April, 1984
Sex : Male
Marital Status : Married
Languages : Hindi, English, Gujarati, Malay & Indonesian
Passport No. : H0226500
Phone no : +91-9879996770, +628 9651797675
Academic Credentials
DIPLOMA IN MECHANINCAL
OTHER PROFESSIONAL QUALIFICATIONS:
o Certified Welding Inspector (AWS ) ( valid till Nov 2017).
o ASNT NDT LEVEL – II IN ULTRASONIC TESTING.
o ASNT NDT LEVEL – II IN Magnetic Particle Testing.
o ASNT NDT LEVEL – II IN Radiography Testing.
o ASNT NDT LEVEL – II IN Dye Penetrant Testing.
EXAMS YEAR OF
PASSING
PERCENTAGE BOARD
DIPLOMA IN
MECHANICAL
MAY-2005 63.12% TECHINCAL EDUCATION
BOARD, GUJARAT
H.S.C. MARCH-2004 48.55% GUJART BOARD
S.S.C. MARCH-2000 78.57% GUJART BOARD
2. PROFESSIONAL EXPERIENCE:
1) Indian Oil Tanking Anwesha Engineering & Construction .(Designated as QA/QC Engineer
since May-14 to till the date )
Client : PT. Oil Tanking Indonesia.
Project Name : Oil Storage Tank Terminal At Karimun ( Tankage & Terminal Piping )
Contractor : IOT EPC Indonesia
Role As an QA/QC Engineer
o Coordinating with the welding inspectors (2 Nos.) and give them plan for the inspection as per
site requirement.
o Develop and take approval of different inspection report formats.
o Maintaining record of reports & keep tracking of all reported activities.
o Giving plan to NDT sub contractor as per site requirement.
o Interpretation of Radiography films of storage tank & terminal piping.
o Conduct welding procedure qualification & welder qualification test as per approved WPS.
o Read Isometric drawing & inspect welding execution work as per the drawing .
o Carry out daily inspection for weld joint fit-up, welding parameters, weld visual for tankage
and piping.
o Preparing fit-up, weld visual, welding parameter reports on daily basis and keep record of
them.
o Preparing welder performance record and keep informing the welder about their performance
and guiding them to improve their performance.
o Check peaking, bending, plumbness, circumference and radius of storage tank..
o Preparing Weld Traceability Sheet for Terminal Piping.
o Preparation of Hydro Test Pack and Mechanical clearance for final hydro testing.
o Coordinating with Auditors during internal & external audits.
2) Punj Lloyd oil & Gas ( Malaysia ) SDN. BHD.(Designated as QA/QC Engineer since Jan.-10
to March-2014 )
Client : Petronas Carigali Sdn. Bhd.
Project Name : 36”X14.23mm WT Gas Pipeline- Sabah to Sarawak Gas Pipeline Project
Inspection Agency : ABS ( American Bureau of Shipping )
Contractor : Punj Lloyd Malaysia Sdn. Bhd.
Role As an QA/QC Engineer
o Coordinating with the welding inspectors (10 Nos.) & coating inspectors (03 Nos.),
and give them plan for the inspection as per site requirement.
o Maintaining record of reports & keep tracking of all reported activities.
o Giving plan to NDT sub contractor as per site requirement.
o Interpretation of Radiography films of pipeline & station piping and prepare clearance for
the field joint coating / Painting.
o Carry out electrode qualification test & welding procedure qualification.
o Carry out welder qualification test as per approved WPS.
o Read Isometric drawing & inspect welding execution work as per the drawing .
o Carry out daily inspection for weld joint fit-up, welding parameters, weld visual for mainline
welding and tie-in welding.
o Preparing fit-up, weld visual, welding parameter reports on daily basis and keep record of
them.
3. o Preparing welder performance record and keep informing the welder about their performance
and guiding them to improve their performance.
o Witnessing manual ultrasonic test, magnetic particle test & dye penetrant test.
o Carry out coating inspection of HDPE heat shrink sleeve & Painting inspection for station
piping.
o Preparing pipe-book for pipeline & History sheet for Station Piping.
o Preparation of Hydro Test Pack and Mechanical clearance for final hydro testing.
o Coordinating with DOSH (Malaysian Government Authority) during Hydro Testing
Activity and to obtain PTO from DOSH.
o Coordinating with Auditors during internal & external audits.
o Reconciliation of line pipes and material.
o Compilation & handover of final documentation.
3) Metro Gas Inspection Services ( Manpower supplier to M/s. Germanischer Lloyds )
( Designated as Inspection Engineer since March-09 to Dec-09 )
Client : Cairn Energy India Ltd.
Project Name : 24”X10.6mm WT Crude oil Pipeline- Barmer to Salaya Pipeline
Inspection Agency : Germanischer Lloyds
Contractor : L & T
Role As an Inspection Engineer
o Witnessing electrode qualification test & welding procedure qualification test.
o Carry out welder qualification test as per approved WPS.
o Inspect the stringing & welding execution as per alignment sheet.
o Carry out daily inspection for weld joint fit-up, welding parameters, weld visual for mainline
welding and tie-in welding.
o Interpretation of radiography films.
o Witnessing manual ultrasonic test, magnetic particle test & dye penetrant test.
o Carry out coating inspection for HDPE sleeve welding ( PIH ) and for HDPE heat shrink sleeve.
o Carry out trench inspection as per alignment sheet.
o Witnessing lowering & holiday test.
o Reviewing & certifying documents.
o Maintaining record of daily progress.
4) NDT Services, Ahmedabad. (Designated as Inspection Engg. since Nov-08 to March-09 )
Client : Gujarat State fertilizers & Chemicals Ltd., Sikka Unit.
Project Name : 8”X8.18mm WT SS316L Phosphoric Acid Pipeline
Contractor : Gaytech Engineering Pvt. Ltd., Baroda.
ROLE AS INSPECTION ENGG:
o Carry out the inspection at different stages during fabrication and errection work of pipeline.
o Review of material test certificates & calibration certificates.
o Witnessing Filler wire qualification. Welding Procedure Qualification & Welder qualification.
o Carry out weld joint fit-up inspection & Weld Visual Inspection on daily basis.
o Witnessing & interpretation of Dye Penetrant Testing.
o Interpretation of Radiography films.
4. o Reviewing daily progress report.
o Maintaining record of daily work reports.
5) Reliance Engg. Asso. Ltd. (Designated as an Q.A./Q.C. Engineer since Jan-07 to Oct-08 )
Project name : East - West gas pipe line
Project nature : Connecting India’s East and West costal areas with a length of 1400 Km
and 48” in Dia. pipe, working pressure of 100 Bar, with a flow rate of 80
MMSCMPD.
Contractor : China Petroleum Pipe line Bureau (CPP)
ROLE AS QUALITY CONTROL ENGG:
Quality : Electrode Qualification, Welding Procedure Qualification, Welder qualification tests,
Manual Ultrasonic Flaw Detection & Advanced Automatic Ultrasonic Flaw Detection,
DPT, RT interpretation, Visual Inspection, Hydro testing, Holiday testing, Cold field
bend inspection, Review of Material Test Certificates, & Calibration certificates,
Maintaining Reports & Hand over of Documents.
Construction : Pipe stringing, Main line welding, TIE-IN welding, Joint coating, Lowering, Crossings
such as River, Rail, Road, Canals, OFC Duct laying, Trenching, Station Piping
Planning : Schedule preparation, progress review with the contractor, coordinating with
Various contractors.
Safety : Ensuring proper safety while working at sites.
5) NDT Services, Ahmedabad. (Designated as an NDT Engineer since Oct-06 to January-07)
o Deployed as a Team Leader in ESSAR Refinery during the commissioning of Refinery to provide
base-line data of Refinery.
o Managing the NDT Technicians, to fulfill the UT, MPT, and DPT requirement.
o Planning the Inspection activities with concerned ESSAR Engineer and executes the inspection
as per plan.
o Boiler inspection at AEC, Ahmedabad.
o Maintaining daily work reports.
5. 6) Welspun Gujarat Stahl Rohren Ltd., Anjar. (Designated as an Asst. Engineering Q.A./Q.C.
Dept. since July-05 to October-06)
o Online Visual Inspection (Fit-up of joint, Rolling marks, Welding) of MS Pipe fabrication.
o Performing & Interpreting Automatic Ultrasonic Testing.
o Mechanical Testing of Steel-coil & welded pipes.
o Radiography Testing Interpretation.
o Performing & Interpreting MUT, MPI, DPT.
o Final Visual Inspection of pipes.
o 3LPE Factory Coating Inspection.
o Dealing with TPI Agencies like as Lloyds, BV, SGS, and IDEAS.
o Hot Bending Inspection.
o Preparing & maintaining daily reports.
7) NDT Services, Ahmedabad. (Designated as a Trainee NDT Engineer since March-05 to July-
05)
o Hands on experience in Ultrasonic Testing, Magnetic Particle Testing, Penetrant Testing,
Thickness & Hardness measurement.
o Have done Structure Inspection in Gujarat Insecticides Ltd., Ankleshwar.
o Have done UT, MPT, LPT, Hardness & Thickness measurement during plant shut-down at
IFFCO, Kalol.
o Have done UT & MPT in Ship-building work.
o Preparing daily work reports.
TECHNICAL SKILLS:
CODE KNOWLEDGE:
o ASME SEC –II, V , VIII DIV.I/II , IX
o ASTM
o API 5L, API 1104
o ASME B31.8, ASME B31.3
SOFTWARE SKILLS:
o AUTO CAD-2005 (2D)
o MS OFFICE-2003
YOGENDRASINGH KUSHWAH
6. 6) Welspun Gujarat Stahl Rohren Ltd., Anjar. (Designated as an Asst. Engineering Q.A./Q.C.
Dept. since July-05 to October-06)
o Online Visual Inspection (Fit-up of joint, Rolling marks, Welding) of MS Pipe fabrication.
o Performing & Interpreting Automatic Ultrasonic Testing.
o Mechanical Testing of Steel-coil & welded pipes.
o Radiography Testing Interpretation.
o Performing & Interpreting MUT, MPI, DPT.
o Final Visual Inspection of pipes.
o 3LPE Factory Coating Inspection.
o Dealing with TPI Agencies like as Lloyds, BV, SGS, and IDEAS.
o Hot Bending Inspection.
o Preparing & maintaining daily reports.
7) NDT Services, Ahmedabad. (Designated as a Trainee NDT Engineer since March-05 to July-
05)
o Hands on experience in Ultrasonic Testing, Magnetic Particle Testing, Penetrant Testing,
Thickness & Hardness measurement.
o Have done Structure Inspection in Gujarat Insecticides Ltd., Ankleshwar.
o Have done UT, MPT, LPT, Hardness & Thickness measurement during plant shut-down at
IFFCO, Kalol.
o Have done UT & MPT in Ship-building work.
o Preparing daily work reports.
TECHNICAL SKILLS:
CODE KNOWLEDGE:
o ASME SEC –II, V , VIII DIV.I/II , IX
o ASTM
o API 5L, API 1104
o ASME B31.8, ASME B31.3
SOFTWARE SKILLS:
o AUTO CAD-2005 (2D)
o MS OFFICE-2003
YOGENDRASINGH KUSHWAH