1. Jaime E. Yanez
15732 DuPage Blvd, Taylor MI 48180
(810) 348-6762
JaimeYanez61@Gmail.com
Professional Summary:
 Extensive and diverse experience in data analysis, testing, and quality control within the
automotive industry.
 Hands on contributor with strong knowledge base in testing concepts and set up,
excellent problem solving ability, and a commitment to quality and achieving results.
 Proven leadership skills with a focus on customer service.
 Self-motivated and proactive in identifying opportunities to make a contribution.
Professional Experience:
Johnson Controls Inc.
01/21012 – Present
• H-Point, Aspect, 202a Dynamic, 202a Static Drops
• IIHS Dynamic, Whiplash and Euroncap Drops
• Laser Scanning using Faro arm and Polyworks 15.0 software
• Pressure Mapping using X Sensor mats
• Assist in the Noise and Vibration lab
RCO ENGINEERING, Plymouth, MI
10/2011 – 01/2012
Laser scan seats in and out of Vehicle using Faro arm and Polyworks software.
H-point drops using HPM1 (Oscar) and HPM 2 (Homer) Manikin's Set up.
Adroit Software & Consulting Inc., Milford, MI
01/2010 – 10/2011 Seat Performance Technician
• Perform Foam and Material Testing on GM vehicle seats using Zwick test stand.
• Laser scan seats in Vehicle coordinates using Faro arm and Polyworks software.
• H-point drops using HPM1 (Oscar) and HPM 2 (Homer) Manikin's Set up and perform
pressure mapping.
Ford Motor Company, Dearborn, MI
Product Test Instrumentation Technician
09/1990 - 01/2009
 Responsible for setting up test data recording devices ( accels,string pots,load cells,etc)
conducting crash tests, and collecting and analyzing data for all Ford product lines.

2.  Worked closely with safety and crash test engineers to resolve actual and potential
issues. Vehicle safety testing resulted in minimal delays in new model year vehicle car
launches.
 Achieved a greater than 98% quality data metrics per month by managing and analyzing
data and reports and troubleshooting any discrepancies.
 Provided key support in the implementation of the new Data Acquisition System
resulting in minimizing turnaround time per test. Converted systems, installing and
verifying functionality of new system with zero interruption of testing.
 Supported other testing labs(oops.servo sled,hyge sled) in meeting critical timelines,
resulting in minimized down time.
 Updated test logs and test set up procedures to keep test laboratories operating in an
efficient manner.
Anthropomorphic Technician, Product Development Safety Lab 1990-1999
 Calibrated test dummies to meet US Government safety testing standards.
 Facilitated daily meetings to analyze company wide safety testing requirement.
 Prioritized customer workloads by maintaining communications with requesting program
engineers to ensure that dummies were available for additional testing of all makes and
models.
 Member of team analyzing prototype dummy for use in side impact testing to determine
feasibility of bringing outsourced testing in-house.
United States Navy
1979 – 1990
Naval Security Patrolman, NAF Detroit, Mt. Clemens, MI 1989-1990
 Responsible for protecting naval personnel and property. Enforced Laws and
Regulations.
 Performed physical security surveys. Wrote and investigated complaint reports.
 Performed testing for the urine analysis drug testing program.
Aircraft Mechanic, NAS Point Mugu, CA / NAS North Island, CA 1979-1989
 Responsible for all Aircraft maintenance and trouble-shooting for the P-3 Aircraft and
SH-60 Helicopter.
 Assigned as Quality Assurance Inspector.
 Served as Ground Support Equipment Petty Officer, Tool Control and Test Equipment
Petty Officer.
 Set training schedules and ensured accuracy of training records for detachment while
serving as Training Petty Officer.
 Launched and recovered aircraft.
Education:
Western High School, Detroit, MI
 Graduate
Training:
 Ford Motor Company OJT
 EXCEL 4.0 INTRO
 Aviation Fundamentals School Millington, TN
 Aviation Machinist Mate School, Millington, TN

3.  Phase 1 Law Enforcement, Selfridge ANG, MI – Expert Medal for .45 caliber
semiautomatic pistol
 Naval Physical Security Course, Selfridge, ANG MI – Marksman Medal for 12 gauge
shotgun
Skills and Abilities:
 Set up and run the certification and test stands in the cert side of the lab.
 Starting with hybrid II dummies and transitioning to the hybrid III and different side
impact dummies E.G. Sid,SidiiS,Biosid,Eurosid,World sid,Biorid.
 Maintaining quality certified and non certified dummies for testing.
 Worked on the build side of the Lab building quality dummies to satisfy customer
request.
 Working with crash engineers to troubleshoot any dummy problems, Postion dummies in
crash vehicles in accordance with government standard A -Team Coordinator Run daily
scheduling meetings Act as representative to Hyge,Components, and Crash scheduling
meetings
Honors and Activities:
 Received Navy Battle E two-consecutive years.
 Received Navy Meritorious Unit commendation award for 1989 Completed SH-60
helicopter
 Familiarization course Completed SH-60 power plants and related systems course and
corrosion course
 Participated in upgrading the Maintenance Training program for SH-60 Sikorsky
Helicopter
 Nominated for Sailor of the Quarter in March of 1989 Qualified as Plane Captain and
Plane Captain qualifier for SH-60 Helicopter