1. JITENDRA P DHOLE
Address: 1376, Vighnaharta, Saraswatinagar, Near Sainik School, Vasumbe, Tehsil: Tasgaon, Dist:
Sangli. 416312, Maharashtra, India
Contact No.: +91 8390026313 / E-Mail: jitendra_dhole@yahoo.co.in jdhole634@gmail.com
April 05, 2016
Kind Attn;
Shine.com
Dear Sir/Madam,
A competent professional with nearly 13 years of experience in Technical, Project co-ordination,
Commissioning, Installation, Production Operations and Supply Chain Management.
.
I have been acknowledged by my understanding for:
 Proficient in managing production operations as per the defined time/ cost parameters &
standards as well as experience of developing procedures for operational excellence.
 Adept in ensuring compliances to production targets as per quality standards.
 A keen strategist and planner with skills in conceptualizing and effecting process initiatives
to enhance operational efficiency and productivity; expertise in Plant Erection &
Commissioning, Start-up, Shut-down & Expansion activities.
 Excellent understanding of Industrial Standards & Procedures, Health & Safety Standards,
Quality Management, Waste Control, Maintenance of Production Lines, etc.
 Effective communicator with excellent relationship, technical & interpersonal skills.
I seek an opportunity within your organization for the profile of “Name of the profile you are
applying for” where I can contribute with my knowledge gained during my education to fore.
Additional capabilities are listed in detail in the enclosed resume.
Looking forward to hearing from you regarding the above position.
Yours sincerely,
JITENDRA P DHOLE
Enclosures: 1)PROFILE, KEY SKILLS AND SO ON.....
3) DEGREE AND APPRECIATION CERTIFICATES. (Would Be Shown During Real time)

2. JITENDRA P DHOLE
Address: 1376, Vighnaharta, Saraswatinagar, Near Sainik School, Vasumbe, Tehsil: Tasgaon,
Dist: Sangli. 416312, Maharashtra, India
Contact No.: +91 8390026313 / E-Mail: jitendra_dhole@yahoo.co.in
Seeking challenging assignments in Production Planning,Plant Operations & Maintenance,
Quality Control and Techno-commercial Operations with an organization of high repute
PROFILE SNAPSHOT
 A competent professional with nearly 13 years of experience in Project co-ordination,
Commissioning, Installation, Production Operations and Supply Chain Management.
 Previously associated with Indofil Chemicals Company as Technical Executive, Engineer
(Superintendent.)
 Exposure in managing assignments viz., erection, installation, commissioning, troubleshooting
and maintenance of all the instruments in various plant projects as per various standards.
 Expert in leading with a record of contributions that streamline the operations related,
invigorated, heightened profitability with productivity and enhanced internal control at site
accordance with organization.
 Skilled of working with cross-functional teams using interactive leadership related activities.
 Abilities in managing maintenance operations for reducing breakdown / downtime and enhancing
operational effectiveness of equipment.
 An effective communicator with excellent relationship management skills and strong analytical,
technical, decision making, problem solving & organizational abilities.
KEY SKILLS
Operations & Maintenance Erection & Commissioning Production Operations
Quality Control Project Management Plant Operations
Process Improvement Techno-Commercial Operations Supply Chain Management
CAREER HIGHLIGHTS
 Appreciated for the project activities including maintenance and shut down within the scheduled
period as a part of the Project Peer Group along with a team member.
 Achieved certification of quality and production for the set target by managing hand to hand
laboratory and production related activities.
 Succeeded in making one of the major product named OPAQUE-621 successful with emphasis to
resolve some failure in quality is annotated as a citation.
 Initiated the idea of bringing back the product again for paint industry as a market leader.
 Successfully implemented the project for emulsion polymers process for manufacturing different
specialty chemicals in the industry.
 Played a key role in scheduling and monitoring inventory and managing the inbound activities as
well depending on the requirements for outbound locations if needed on priority and urgent basis.
 Took part in training program related to safety & ISO awareness.
 Used 1200 USGK Monomer to manufacture LMA and SMA for depressol petroleum industries.

3. ORGANIZATIONAL DETAILS
Since Aug 2006 Presently working with Small office and applying daily for opportunity.
.
Jan 1994-Jul 2006 Indofil Chemicals Company Technical
Executive, Engineer (Superintendent)
Key Result Areas:
 Directed production plans, arranged resources to ensure achievement of targets as per cost
parameters.
 Handled manufacturing, quality production and goal per set at site.
 Planned execution and commissioning of projects co-ordination, maintenance, shut down activity
of plant and its accessories including utilities, material handling systems for bulk materials,
storage tanks and its accessories of bulk monomers/chemicals.
 Monitored process in operations with PLC & DCS-Control System and resolved the issues on
time.
 Initiating new process concepts for production optimization and yield improvement.
 Developed schedule, performance operations to help sustain & grow programs, services as per
strategy.
 Analyzed various processes/ applications and recommended modifications or equipment
calibrations to enhance operational efficiency.
 Took part in meetings and in strategic activities, whenever needed as per organization.
 Planned and implemented the annual calendar of activities related to work areas as well as
special events, training & official administration acts.
 Created budget expenditure, prepared plan and meetings review whenever necessary to be
presented to the organization or senior management.
 Implemented the preventive and condition based periodic maintenance, defect analysis, break
down drills, pre and post refit trails for improving the overall reliability & safety.
 Analyzed and confirmed the quality matters for final output and sustained the growth within
limited as per organization in actual required market segment.
 Delegated responsibilities for executions of organization strategies as a leading hand at work
areas and ensured growth business as per organizational instructions and needs.
 Performed installation and commissioning of:
 Pumps like feed pumps, moyno pumps, screw pumps, centrifugal pumps and other
combustion fuel pumps and other accessories like Rotary valves, Cyclones air heaters and fan
etc.
 Reactors, precipitation reactors, FRP tanks, storage tanks of capacities varied from lower
limit to higher 60 Metric Ton.
 Conveyors like tube chain conveyors, Sunekon Screw & Pneumatic Conveyors etc. for bulk
materials at plant.
 Utilities like cooling towers, inert gas generating plant ( In ox),dry air and wet air plant for
instruments and other plant respectively, chillers & demineralization plant needed for some
process plants.
 Executed troubleshooting and fault finding of mechanical equipment and systems during project
execution
 Conducted tests & inspections to ensure operational effectiveness of utilities.

4.  Involved in the manufacturing of agrochemicals and emulsion polymers, intermediates, specialty
chemicals for industrial and agriculture use.
 Implemented & followed up of ISO-9001as well as involved in ISO-1400 with their constant
compliance.
 Monitored availability and delivery of right quality materials at the right time, price and terms.
 Supervised manpower /work distribution to ensure that teams adhere to all the quality tool and
procedures.
ACADEMIC CREDENTIALS
1993 Bachelor of Engineering (Chemical) from PVPIT College Budhgaon, Shivaji University,
Sangli
PERSONAL DETAILS
Date of Birth 03/08/1971
Languages Known English, Hindi & Marathi
References Available on request
Summary of Achievements:(Few)

5. 1) IndividuallyHandled andimplementedprojectincludeshazardouschemical transportationand
storage facilityunderinertatmosphere andachievedcostreductionobjectiveinitiative aswellas
implementedin3-4 monthswithtraining 10-15 workforce ensuringandcomplyingof safety,
environmentmeasuresandthusleading tocost savingof rupees3-5 Lakh perannum Thiswasdue to
versatile,problemsolving,leadershipandteambuilding andresultorientedqualities.
2) Implementedprojectactivitiesanddebottleneckingactivitiesincludingerection-installationand
commissioning tomake standard and fine tunedof processtosmoothrun withsome peergroupand
projectpeergroupand team
3) Implementedimprovementsandcostreductionandincreasedproductivityinsome product process
at site locationandone among thisimplementationisnarratedbelow;
Instance inshort of improvedprocess
Inscrutablemoment was the one incidentfor the organization for the few major products which left everybody in
lurch due to some off-specification properties which gained the ground after so many brown studies,delvingand
pondering on by us and especially consideringevery guild or peer member’s points for failureof the required
specification and these points of everybody really turned into shiningor consecrated in the outfield for the market
as organization a market leader that produces agrochemicalsand number of specialty chemicals for different
industrial usewith different properties likeAssay,MoistureContent, Active Ingredient, Wetting Out Time and so
on for agrochemicals aswell as Total Solids,PH,Clarity,Viscosity,Opacity,particleSize,Concentration Content and
so on for Specialty chemicals.Among these below one instanceof one product was made successful with emphasis
to resolvesome failurein quality is annotated as a citation.
For Instances;
One of the most and major productlikeOPAQUE-621with well properties demanded by a paintindustries found
failingin someof the properties likePH, Opacity.When we started delvingreason behind itand the most of
product opacity was below the par due to number of operation pitfallsincludingvery slightor even minute delay
duringprocess operation,some of the rawmaterial with very fraction of off-specification in shelf-lifeas well as the
inability of reactor material of construction after every consecutivebatches due to improper or lackingof wiping
out and cleaningof reactor MOC as PH of previous batches had been found getting added into next one.
(Opacity: Opacity is the property required for paintas additives for better viscosity and thickness and itshould not
be a transparentas well as dull as this isa very important whilepaintapplication.)
Ironing Out off-specification Opacity:
The most probablereasons were found and issuewas resolved with followingcrux or points as,
1) Followingthe process parameters from very firstand initial stageof batch as per checklistformed by our
team.
2) The reaction was to go in three stages includingaddingquality rawmaterial i nitiatingwith initiator and
acceleratingwith some additives called propagator and the final breakingthe reaction with every checks
at every smaller stages with proper controllingcoolingand strippingor heating.

6. 3) Thoroughly wipingout or cleaningof main kettles or reactors and ensure the PH and clarity of de-
mineralized water required for next batches after givingsome short boil and ensure of PH is neutral of
boiled water atroom temperature.
4) Coolingand heating with proper backup without fail during reaction stagewith proper attention.
5) Ensuringthe holdingtime after completion of reaction is maintained properly without delay and packing
of the material once all quality checks arewithin specification withoutany further delay with precaution.
Conclusion:
What has been annotated above points is eventually really conferred with perfect and lifetime solution for
Opacity as a reward for us to bringthe product again for paintindustry as a market leader.

7. DEGREE CERTIFICATE AND OTHER APPRECIATION CERTIFICATES:
(Would Be Shown During Real Time)