Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html

•

0 likes•9 views

UIET CSJM UNIVERSITY MICROPROCESSOR (ECE-S304) B.TECH PAPER 2020-https://www.educationsmaterials.com/2020/12/uiet-csjm-university-microprocessor-ece.html

Engineering

Menu
 facebook  twitter  google+  Whatsapp
 Educations Materials 
DEPARTMENT OF ECE
UIET CSJM UNIVERSITY
MICROPROCESSOR (ECE-S304)
SEMESTER:- 5th Mid Semester Examination-2020
Time: 1.5 Hrs MM : 20
Note: Attempt all the questions. A calculator is not allowed.
Q1-If the memory chip size is 256 X1 bits, how many chips are required to make up 1KB of memory?
Q2-The memory address of the last location of a 1KB memory chip is given as FBFF H Specify the memory map.
Q3- Explain the process of Opcode-fetch.
Q4- Calculate the execution time of the instruction LDA Address if the crystal frequency of an 8085 system is 3MHZ.
Q5- Why Special purpose registers are 16 bits? Explain.
Q6- Write an ALP to exchange the 24-bit data of memory locations 3000H onwards and 5000H onwards.
Q7- Write an ALP to add two, 24-bit numbers present in registers B-D-H and L-C-E. Store 25-bit result in memory starting
from 4000 H onwards using RIAM instruction.
Q8- Write an ALP to perform the subtraction X - Y where X & Y are two, 8 bit BCD numbers present in memory from location
4000 H onwards and store the result in memory in sequence.
DOWNLOAD IN PDF FORMAT
UIET CSJM UNIVERSITY
MICROPROCESSOR (ECE-S304) B.TECH
PAPER 2020
Menu


 Newer Post Older Post 
    
Educations Materials
In This Blog You will Find All Types of Study Materials
Comment as: Google Accoun
PublishPublish PreviewPreview
Enter your comment...
NO COMMENTS:
POST A COMMENT

Educations Materials
View my complete pro le
Author
Facebook
Microprocessor B.tech Paper 2020 Kanpur University
UNIVERSITY INSTITUTE OF ENGINEERING & TECHNOLOGY END-SEMESTER EXAMINATION 2020 B.TECH
IIIrd YEAR ELECTRONICS & COMMUNICATION ENGINEE...

Educations Materials
about a month ago
1 Comment Share
Educations Materials
511 likes
Like Page Sh
Home
Privacy Policy
Terms and conditions
Disclaimer
Contact us

Labels
Business
Name
Email *
Contact Form

CREATED BY SORATEMPLATES | DISTRIBUTED BY SATISH VERMA
Message *
Send
     

Similar to Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html

The growing use of Big Data frameworks on large machines highlights the importance of performance issues and the value of High Performance Computing (HPC) technology. This paper looks carefully at three major frameworks Spark, Flink and Message Passing Interface (MPI) both in scaling across nodes and internally over the many cores inside modern nodes.We focus on the special challenges of the Java Virtual Machine (JVM) using an Intel Haswell HPC cluster with 24 cores per node. Two parallel machine learning algorithms, K-Means clustering and Multidimensional Scaling (MDS) are used in our performance studies. We identify three major issues – thread models, affinity patterns, and communication mechanisms – as factors affecting performance by large factors and show how to optimize them so that Java can match the performance of traditional HPC languages like C. Further we suggest approaches that preserve the user interface and elegant dataflow approach of Flink and Spark but modify the runtime so that these Big Data frameworks can achieve excellent performance and realize the goals of HPCBig Data convergence.

Java Thread and Process Performance for Parallel Machine Learning on Multicor...

Saliya Ekanayake

Available HPC resources at CSUC

CSUC - Consorci de Serveis Universitaris de Catalunya

IFSM 310 Software and Hardware Infrastructure Concepts Computer and Number Systems 1. (10 pt) You have been hired to develop a website-based sales system for a large international retail firm. List and describe at least four features that are specific to the Web design of your system and customer service important to consider if your system is to be successful at attracting and keeping customers living outside of the US. Include not only characteristics of the user interface, but those issues that must be uniquely addressed to successfully service your non-US customers. 2. (2.5 pt each) In order to receive credit for these problems, you must show all of the steps you took to arrive at your answers. (c) Convert the following decimal number to binary: 21842 (d) Convert the following binary number to decimal: 11000111011.101 (c) Convert the following hexadecimal number to decimal: CA97 (d) Convert the following binary number to hexadecimal: 1110011111011010100 CPU and Memory 3. (10 pt) ASCII, Unicode, and EBCDIC are, of course, not the only numeric / character codes. The Sophomites from the planet Collegium use the rather strange code shown in the Figure below. There are only thirteen characters in the Sophomite alphabet, and each character uses a 5-bit code. In addition, there are four numeric digits, since the Sophomites use base 4 for their arithmetic. Given the following Sophomite sequence, what is the corresponding binary message being sent by the Sophomites? (HINT: Decode the sequence reading from left to right then write the corresponding binary sequence, leaving a space between each binary sequence.) 4. (10 pt) Define memory cache write-through and write-back techniques and describe the advantages and disadvantages of each. Input / Output 5. Answer the follow questions about interrupts. a. (5 pt) Describe in detail the steps that occur when a system receives an interrupt. b. (5 pt) Describe how these steps differ in the case when a system receives multiple interrupts Computer Systems 6. Answer the following questions about clusters. a. (5 pt) Describe how you might use a cluster to provide fault-tolerant computing b. (5 pt) Describe how you might use a cluster architecture to provide rapid scalability for a Web-based company experiencing rapid growth. Networks 7. Answer the following questions about communication protocols. a. (5 pt) Using the operations of UDP (User Datagram Protocol) and TCP (Transmission Control Protocol) as a basis, carefully explain the difference between connectionless and connection-oriented communication. b. (5 pt) If you were ordering a number of items from an online seller, such as amazon.com, which Protocol (TCP or UDP) would you recommend and explain why . 8. In the context of network security, a. (3 pt) exp.

IFSM 310 Software and Hardware Infrastructure ConceptsComputer.docx

scuttsginette

Ec6504 microprocessor and microcontroller

Senthil Kumar

D I G I T A L I C A P P L I C A T I O N S J N T U M O D E L P A P E R{Www

guest3f9c6b

Digital Ic Applications Jntu Model Paper{Www.Studentyogi.Com}

guest3f9c6b

Tute

Royalzig Luxury Furniture

7th Semester (June; July-2015) Computer Science and Information Science Engin...

BGS Institute of Technology, Adichunchanagiri University (ACU)

Matrix transposition

동호 이

Internet Technologies (May - 2018) [IDOL - Revised Course | Question Paper] bscit question paper, bscit semester vi, c#, cbsgs, customer relations management, geographic information systems, idol, idol - revised course, internet technologies, it laws and patents, kamal t, may - 2018, mumbai bscit study, mumbai university, old question paper, previous year question paper, project management, question paper, semester vi question paper, strategic it management, Internet Technologies, Digital Signals and Systems, Data Warehousing, Project Management

Internet Technologies (May - 2018) [IDOL - Revised Course | Question Paper]

Mumbai B.Sc.IT Study

MaPU-HPCA2016

Shaolin Xie

CS 6402 – DESIGN AND ANALYSIS OF ALGORITHMS questio

Karthik Venkatachalam

Microprocessor Architecture (Question Paper) [April – 2017 | 75:25 Pattern]

Mumbai B.Sc.IT Study

COMMONWEALTH OF AUSTRALIA Copyright Regulations 1969 Warning This material has been reproduced and communicated to you by or on behalf of The Charles Darwin University pursuant to Part VB of the Copyright Act 1968 (the Act). The material in this communication may be subject to copyright under the Act. Any further reproduction or communication of this material by you may be the subject of copyright protection under the Act. Do not remove this notice ( Semester 2, 2016 FINAL EXAMINATION DURATION HIT274 – Network Engineering Applications Teaching Period Student Number Given Names Family Name Reading Time: 10 minutes Writing Time: 180 minutes ) INSTRUCTIONS TO CANDIDATES The examination has 3 sections Section A: Suggested Time: Multiple Choice Questions: Answer ALL questions 45 minutes (30 marks) Section B: Suggested Time: Short Answer Questions: Answer ALL questions 95 minutes (50 marks) Section B: Suggested Time: Case Study: Answer ALL questions 40 minutes (20 marks) Questions in section A must be answered directly onto the Examination Paper. Section B and C are to be answered in the booklets provided. Note that questions ARE NOT of equal value. EXAM CONDITIONS You may begin writing from the commencement of the examination session.The reading time indicated above is provided as a guide only. This is a CLOSED BOOK examination No calculators are permitted No handwritten notes are permitted No dictionaries are permitted ADDITIONAL AUTHORISED MATERIALS EXAMINATION MATERIALS TO BE SUPPLIED No additional printed material is permitted 1 x 16 Page Book 1 x Scrap Paper ( THIS EXAMINATION PAPER AND SUPPLIED MATERIALS ARE NOT PERMITTED TO BE REMOVED FROM ANY EXAMINATION VENUE IN ANY CIRCUMSTANCE. THIS EXAMINATION IS PRINTED DOUBLE-SIDED. ) Semester 2, 2016 FINAL EXAMINATION HIT274 – Network Engineering Applications Page 1 of 10 THIS EXAMINATION IS PRINTED DOUBLE-SIDED. THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Semester 2, 2016 FINAL EXAMINATION HIT274 – Network Engineering Applications Page 2 of 10 Section A Multiple Choice QuestionsTotal No of Marks for this section: 30 This section should be answered directly into this booklet by placing an X next to your chosen answers. Please ensure that your name and student number have been written on this booklet. Each question is worth 1 mark. Suggested Time allocation for Section A: 45 mins Semester 2, 2016 FINAL EXAMINATION HIT274 – Network Engineering Applications Page 3 of 10 Section B Short Answer QuestionsTotal No of Marks for this section: 50 This section should be answered in the Answer Booklet provided. Marks for each question are indicated. Suggested Time allocation for Section B: 95 mins Question 1 Complete the table below: Full IPv6 Abbreviated IPv6 a FE80:0000:0000:0400:0000:0000:0000:054A fe80:0:0:400::54a b 4:b200:80:f0a:5000:c:885:a000 4:B200:80:F0A:5000:C:885:A000 c 0C0 ...

COMMONWEALTH OF AUSTRALIACopyright Regulations 1969

Cache recap

Cache recap

Cache recap

Cache recap

Cache recap

Cache recap

Similar to Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html (20)

Java Thread and Process Performance for Parallel Machine Learning on Multicor...

Available HPC resources at CSUC

IFSM 310 Software and Hardware Infrastructure ConceptsComputer.docx

Ec6504 microprocessor and microcontroller

D I G I T A L I C A P P L I C A T I O N S J N T U M O D E L P A P E R{Www

Digital Ic Applications Jntu Model Paper{Www.Studentyogi.Com}

Tute

7th Semester (June; July-2015) Computer Science and Information Science Engin...

Matrix transposition

Internet Technologies (May - 2018) [IDOL - Revised Course | Question Paper]

MaPU-HPCA2016

CS 6402 – DESIGN AND ANALYSIS OF ALGORITHMS questio

Microprocessor Architecture (Question Paper) [April – 2017 | 75:25 Pattern]

COMMONWEALTH OF AUSTRALIACopyright Regulations 1969

Cache recap

Recently uploaded

We investigated the applicability and efficiency of the MLMC approach to the Henry-like problem with uncertain porosity, permeability and recharge. These uncertain parameters were modelled by random fields with three independent random variables. Permeability is a function of porosity. Both functions are time-dependent, have multi-scale behaviour and are defined for two layers. The numerical solution for each random realisation was obtained using the well-known ug4 parallel multigrid solver. The number of random samples required at each level was estimated by calculating the decay of the variances and the computational cost for each level. The MLMC method was used to compute the expected value and variance of several QoIs, such as the solution at a few preselected points $(t,\bx)$, the solution integrated over a small subdomain, and the time evolution of the freshwater integral. We have found that some QoIs require only 2-3 mesh levels and samples from finer meshes would not significantly improve the result. Other QoIs require more grid levels.

litvinenko_Henry_Intrusion_Hong-Kong_2024.pdf

Alexander Litvinenko

A Coordinate Measuring Machine (CMM) is a precision measuring metrology machine used in manufacturing and quality control processes to precisely measure the geometric characteristics of objects. It operates on the principle of coordinate geometry, employing a probe to collect data points from the surface of an object to determine the dimensions, shapes, and positions of features, such as holes, slots, and surfaces. CMMs are essential tools for ensuring that manufactured parts meet design specifications and quality standards.

What is Coordinate Measuring Machine? CMM Types, Features, Functions

VIEW

electrical installation and maintenance.

benjamincojr

UNIT-2 image enhancement.pdf Image Processing Unit 2 AKTU

ankushspencer015

NEWLETTER FRANCE HELICES/ SDS SURFACE DRIVES - MAY 2024

EMMANUELLEFRANCEHELI

This presentation, crafted with expertise from the oil and gas industry, details the imperative techniques and tools used in the process of incident investigation. The presentation highlights the structured methods involving interviews with engaged parties, the importance of gathering documentary evidence, employing structured forms and checklists, the value of reviewing surveillance footage, the power of modern technology, and synergizing with subject-matter experts. It is designed for industry professionals keen on enhancing safety practices, regulatory compliance, and preventive measures within their operational environment. Valuable for health & safety officers, compliance managers, and operation leaders, it prioritises continuous learning and adherence to best practices to ensure workplace safety and operational excellence.

Maximizing Incident Investigation Efficacy in Oil & Gas: Techniques and Tools

soginsider

Diploma Engineering Drawing Qp-2024 Ece .pdf

JNTUA

Interfacing Analog to Digital Data Converters ee3404.pdf

ragupathi90

Working Principle of Echo Sounder and Doppler Effect.pdf

SkNahidulIslamShrabo

History of Indian Railways - the story of Growth & Modernization

Emaan Sharma

5G and 6G refer to generations of mobile network technology, each representin...

archanaece3

Involute of a circle,Square, pentagon,HexagonInvolute_Engineering Drawing.pdf

JNTUA

Instruct Nirmaana 24-Smart and Lean Construction Through Technology.pdf

Er.Sonali Nasikkar

Exploring AI's Impact: Key Features in Due Diligence In the realm of due diligence, AI emerges as a game-changer, revolutionizing traditional methods with its advanced features. AI-powered algorithms excel in data analysis, swiftly sifting through vast amounts of information for crucial insights. Automation streamlines document review processes, ensuring accuracy and efficiency. Moreover, AI enables predictive analytics, forecasting potential risks and opportunities with precision. With machine learning capabilities, AI continuously improves its performance, adapting to evolving trends and patterns. By integrating AI into due diligence practices, businesses gain a competitive edge, maximizing efficiency and making informed decisions swiftly. AI in due diligence is not just a tool; it's a transformational force driving businesses into the future. https://www.leewayhertz.com/ai-in-due-diligence/

Artificial Intelligence in due diligence

mahaffeycheryld

21scheme vtu syllabus of visveraya technological university

Mohd Saifudeen

The Entity-Relationship Model(ER Diagram).pptx

MANASINANDKISHORDEOR

Autodesk Construction Cloud (Autodesk Build).pptx

Mustafa Ahmed

CLOUD COMPUTING SERVICES - Cloud Reference Modal

SwarnaSLcse

21P35A0312 Internship eccccccReport.docx

rahulmanepalli02

analog-vs-digital-communication (concept of analog and digital).pptx

Karpagam Institute of Teechnology

Recently uploaded (20)

litvinenko_Henry_Intrusion_Hong-Kong_2024.pdf

What is Coordinate Measuring Machine? CMM Types, Features, Functions

electrical installation and maintenance.

UNIT-2 image enhancement.pdf Image Processing Unit 2 AKTU

NEWLETTER FRANCE HELICES/ SDS SURFACE DRIVES - MAY 2024

Maximizing Incident Investigation Efficacy in Oil & Gas: Techniques and Tools

Diploma Engineering Drawing Qp-2024 Ece .pdf

Interfacing Analog to Digital Data Converters ee3404.pdf

Working Principle of Echo Sounder and Doppler Effect.pdf

History of Indian Railways - the story of Growth & Modernization

5G and 6G refer to generations of mobile network technology, each representin...

Involute of a circle,Square, pentagon,HexagonInvolute_Engineering Drawing.pdf

Instruct Nirmaana 24-Smart and Lean Construction Through Technology.pdf

Artificial Intelligence in due diligence

21scheme vtu syllabus of visveraya technological university

The Entity-Relationship Model(ER Diagram).pptx

Autodesk Construction Cloud (Autodesk Build).pptx

CLOUD COMPUTING SERVICES - Cloud Reference Modal

21P35A0312 Internship eccccccReport.docx

analog-vs-digital-communication (concept of analog and digital).pptx

Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html

1. Menu  facebook  twitter  google+  Whatsapp  Educations Materials  DEPARTMENT OF ECE UIET CSJM UNIVERSITY MICROPROCESSOR (ECE-S304) SEMESTER:- 5th Mid Semester Examination-2020 Time: 1.5 Hrs MM : 20 Note: Attempt all the questions. A calculator is not allowed. Q1-If the memory chip size is 256 X1 bits, how many chips are required to make up 1KB of memory? Q2-The memory address of the last location of a 1KB memory chip is given as FBFF H Specify the memory map. Q3- Explain the process of Opcode-fetch. Q4- Calculate the execution time of the instruction LDA Address if the crystal frequency of an 8085 system is 3MHZ. Q5- Why Special purpose registers are 16 bits? Explain. Q6- Write an ALP to exchange the 24-bit data of memory locations 3000H onwards and 5000H onwards. Q7- Write an ALP to add two, 24-bit numbers present in registers B-D-H and L-C-E. Store 25-bit result in memory starting from 4000 H onwards using RIAM instruction. Q8- Write an ALP to perform the subtraction X - Y where X & Y are two, 8 bit BCD numbers present in memory from location 4000 H onwards and store the result in memory in sequence. DOWNLOAD IN PDF FORMAT UIET CSJM UNIVERSITY MICROPROCESSOR (ECE-S304) B.TECH PAPER 2020 Menu 

2.  Newer Post Older Post       Educations Materials In This Blog You will Find All Types of Study Materials Comment as: Google Accoun PublishPublish PreviewPreview Enter your comment... NO COMMENTS: POST A COMMENT

3. Educations Materials View my complete pro le Author Facebook Microprocessor B.tech Paper 2020 Kanpur University UNIVERSITY INSTITUTE OF ENGINEERING & TECHNOLOGY END-SEMESTER EXAMINATION 2020 B.TECH IIIrd YEAR ELECTRONICS & COMMUNICATION ENGINEE...

4. Educations Materials about a month ago 1 Comment Share Educations Materials 511 likes Like Page Sh Home Privacy Policy Terms and conditions Disclaimer Contact us

5. Labels Business Name Email * Contact Form

6. CREATED BY SORATEMPLATES | DISTRIBUTED BY SATISH VERMA Message * Send      

Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html

Recommended

Recommended

More Related Content

Similar to Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html

Similar to Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html (20)

Recently uploaded

Recently uploaded (20)

Www educationsmaterials-com-2020-12-uiet-csjm-university-microprocessor-ece-html