March 22-24, 2017
• Learn from top industry professionals.
• ESD Association instructors who developed the ANSI/ESD and IEC ESD Standards bring you today’s current information and developments.
• EOS/ESD Association, Inc. is the Global Leader on ESD Education
Courses:
FC361: Class 0A Devices & Boards - ESD Controls and Auditing
Measurements
FC360: Electrical Overstress (EOS) in Manufacturing and Test
FC340: ESD Program Development and Assessment (ANSI/ESD
S20.20 Seminar)
For more information visit https://esda.org/events/regional-tutorials/
Kisan Call Centre - To harness potential of ICT in Agriculture by answer farm...
EOS/ESD Association, Inc. Regional Tutorials in Shenzhen, China
1. 128September201612:00PM
Co-Sponsored by
Shenzhen HORB TECH Development Co.,Ltd.
Floor 5-7, Block B, Funing Hi-Tech Industrial Park,
No.71-2 Xintian Rd, Fuyong Town, Baoan District,
Shenzhen, China.
TEL: +86-755-29461997
FAX: +86-755-86183100
Http://www.horb.com.cn
Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
EOS/ESD Association Regional Tutorials
Sponsored by Shenzhen Best-Resource Consulting Services Ltd.
March 22-24, 2017
Floor 5-7, Block B, Funing Hi-Tech Industrial Park,
No.71-2 Xintian Rd, Fuyong Town, Baoan District, Shenzhen, China.
• Learn from top industry professionals.
• ESD Association instructors who
developed the ANSI/ESD and IEC ESD
Standards bring you today’s current
information and developments.
Sponsored by
Shenzhen Best-Resource Consulting Services Ltd.
Floor 5-7, Block B, Funing Hi-Tech Industrial Park,
No.71-2 Xintian Rd, Fuyong Town, Baoan District,
Shenzhen, China.
TEL: +86-755-86182990 Hotline: 800-830-9440
FAX: +86-755-86183100
Http://www.esd-resource.com
2. Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
EOS/ESDAssociation Regional Tutorials, Shenzhen, China, March 22-24, 2017
ABOUT THE INSTRUCTOR
FC361: Class 0A Devices & Boards - ESD Controls and Auditing
Measurements
9:00 a.m. - 12:30 p.m.
Instructor: Terry Welsher, Dangelmayer Associates LLC
Advanced ESD Controls and Auditing Measurements for CDM & Class 0 (ultra-sensitive) devices and Circuit Boards are not
well known and there are many technical and strategic pitfalls that must be avoided. Industry definitions (threshold levels) for
Class 0 will be described and the history of their use will be reviewed. The Class 0 category is broken down into sub-categories
of increasing risk. Students will learn how to make valid measurements, avoid common pitfalls, and how to use this data to
successfully handle Class 0 sensitivities. Advanced measurements will be described including event detection and high speed
current measurements. Students will learn when each measurement type is useful. Compelling case studies will illustrate these
techniques and the success they produce.
ESD Control procedures for Class 0 manufacturing require customization, attention to detail and a full understanding of the
technology. Thus, each company will need to develop a Class 0 ESD subject matter expert (SME) to ensure the correct and cost
effective counter measures are taken. SOPs (Special Operating Procedures) developed by SMEs will be discussed that have
proven to virtually eliminate Class 0 failures.
This tutorial will be highly interactive with live demonstrations, in-plant photographs, and video clips. Students will be encouraged
to ask questions and actively participate in the discussions. References to technical literature on ultra-sensitive devices will be
included.
FC360: Electrical Overstress (EOS) in Manufacturing and Test
1:30 p.m. - 5:00 p.m.
Instructor: Terry Welsher, Dangelmayer Associates L.L.C.
Electrical overstress (EOS) is a major cause of device failure in manufacturing and in the field. Despite this, there is relatively
little information on the sources of EOS and on prevention practices, particularly for the factory. In this tutorial, the fundamentals
of device overstress are reviewed. Relationships among device EOS stressing models, such as the Wunsch-Bell curve, are
discussed. The causes of EOS and EOS-like events in manufacturing are described and categorized by source and by stress-
type. The difficulties in distinguishing between power-induced EOS and high current ESD events such as charged-board events
(CBE) and cable discharge events (CDE) are discussed. Case histories, including failure analysis and root cause determination,
are presented and the few relevant industry specifications are reviewed.
Dr. Terry L. Welsher retired from Lucent Technologies-Bell Laboratories Engineering Research Center in 2001, as the director of the quality,
test, & reliability department. He began his career in Bell Labs in 1978; where he worked on electrical conduction mechanisms in insulat-
ing polymers and electrolytic corrosion failure mechanisms in electrical interconnection materials. In 1984, he was appointed distinguished
member of technical staff for his work in these fields. In 1986, he was promoted to technical manager to re-constitute the Bell Laboratories
core expertise in electrostatic discharge (ESD). The newly formed group proceeded to produce a string of ground-breaking contributions
to the field and played a key role in advancing industry standards. In 1994, he broadened his group’s activities to all aspects of hardware
reliability for Lucent Technologies with special emphasis in environmental stress testing (EST) and product reliability prediction and planning.
In 1997, he was promoted to director of the quality, test & reliability center of excellence where he directed the development and deploy-
ment of product quality, test and reliability assurance practices for Lucent Technologies business units. This work included design for test-
ability of integrated circuits, board and system level test and diagnosis and special techniques for testing of RF and optoelectronic systems
and components. After leaving Lucent, he became reliability director for LaserSharp Corporation, an optical fiber laser amplifier company, where he was respon-
sible for product quality, reliability, and compliance. Since 2004, he has been senior vice president of Dangelmayer Associates, LLC, an EOS/ESD consulting firm.
Dr. Welsher was chairman of the ESD Association standards committee 1988-1989. He was technical program chair in 1991, vice general chair in 1992, and general
chair in 1993 of the EOS/ESD Symposium. He served as member of the Symposium board of directors 1993-1995. He has also been active in quality standards
and road mapping activities with Sematech, the EOS/ESD Association, and the JEDEC 14 quality and reliability committee. He served on the board of directors of
JEDEC 1999-2001. He is currently co-chair of the joint JEDEC/ESDA HBM and CDM ESD working groups, president of the EOS/ESD Association, and a mem-
ber of the advisory board of iNARTE, a telecommunications technical certification organization. Recently, he has led the effort to harmonize and merge JEDEC
and ESDA device testing standards. He holds a BS in chemistry from Florida State University and a PhD in chemical physics from the University of Texas at
Austin. He is author or co-author of fifty papers in solid state physics, applied mathematics, organic chemistry, electronics reliability, and electrostatic discharge.
MARCH 22, 2017
3. Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
EOS/ESDAssociation Regional Tutorials, Shenzhen, China, March 22-24, 2017
ABOUT THE INSTRUCTORS
FC340: ESD Program Development and Assessment (ANSI/ESD
S20.20 Seminar)
9:00 a.m. - 5:00 p.m.
Instructors: Ron Gibson, Advanced Static Control Consulting (ASCC); John Kinnear, IBM
Certification: PrM
This seminar provides instruction on designing and implementing an ESD control program based on ANSI/ESD
S20.20. The course provides participants with the tools and techniques to prepare for an ESD facility audit. This
two-day course is an ESDA certification requirement for in-plant auditors and program managers who are working
toward professional ESD certification. Current changes to ANSI/ESD S20.20 will be discussed and presented
The following topics are covered in this course:
• Overview of ANSI/ESD S20.20
• How to approach an assessment
• Administrative elements
• ESD program assessment
• ESD program techniques for different applications
• Technical elements
• Overview of the assessment process
• The audit checklist and follow-up questions
Ron Gibson is the president of Advanced Static Control Consulting (ASCC), which was founded in 2010. ASCC provides consulting, ESD
material and product qualification, and develops ESD training programs for clients. From 1994 to 2010 Ron was the corporate ESD pro-
gram manager for Celestica International, Inc. and was responsible for the ESD control programs at all of Celestica’s factories worldwide.
From 1979 to 1994 Ron worked for IBM. Ron co-authored IBM’s initial factory ESD standards. Ron has been a member of the ESD As-
sociation (ESDA) since 1988, and has served as an officer in the positions of president, senior vice president, vice president, secretary,
and treasurer. He has also served as chairman of the ESDA Standards Committee (STDCOM) for over 10 years and as the first chair-
man of the ESDA certification business unit. Gibson is an iNARTE certified electrostatic discharge control engineer, an ESDA certi-
fied instructor for the program manager certification program, and is a certified chief ESD coordinator for the Reliability Center of Japan.
John Kinnear is an IBM senior engineer specializing in process & system technology, and facility certification in accordance with ANSI/
ESD S20.20. He has a BS degree from University of Buffalo and a MS degree from Syracuse University. John is well known globally for
his technical contributions to national and international standards. He has been the IBM ESD site coordinator for the Poughkeepsie site
since 1989. He is past chairman of the IBM inter-divisional technical liaison committee for ESD protection and is an important member of
his company’s committee to develop and implement the ESD corporate program for IBM. John has coordinated the testing of large main-
frames for compliance to EMC, safety, environmental, shipping, and volatile organic emission standards. He has also been the lead en-
gineer on testing large mainframe systems to EMC emissions and immunity standards for FCC, CE Mark, VCCI, and other national re-
quirements. As a member of the ESD Association since 1990, John has served in several standards development committees as well
as association management positions. John is the appointed technical adviser to the United States National Committee/IEC technical
committee 101, where he represents the United States to the International Electrotechnical Commission (IEC). In this position he assist-
ed in the evolution of international ESD standards and supports international adoption of ANSI/ESD S20.20. As chair of the ESDA’s facility certification (ANSI/
ESD S20.20) development program, John played major roles in the program’s development and industry launch. In particular, John coordinated the initial devel-
opment of lead assessor training, ISO registrar certification, and witness audits. John has served in every ESD Association officer’s position, including vice presi-
dent, senior vice president, and president. He is the past chairman of the EOS/ESD Symposium technical program committee and past general chairman of the
2004 EOS/ESD Symposium. For his contributions to the ESD Association, John was presented with the Outstanding Contribution award in September 2006..
This seminar is intended to provide the student with the necessary understanding of
the principles involved in ANSI/ESD S20.20, to allow the development of an ESD Control
Program Plan that minimizes the risk of damage to sensitive items. In-class discussions
cover real life ESD program problems and solutions.
MARCH 23-24, 2017
4. 428September201612:00PM
REGISTRATION
Please Print or Type (Your name and company will appear on badge and/or certificate exactly as written below.)
EOS/ESDAssociation Regional Tutorials, Shenzhen, China, March 22-24, 2017
Shenzhen BEST-RESOURCE Consulting Co.,Ltd.
Floor 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian Rd, Fuyong Town
Baoan District, Shenzhen, China.
Payment • Company purchase orders not accepted.
Registration Information
For credit card payments:
Register online at:
ESD Association
http://www.esda.org/events/calendar/
Phone: +1 (315) 339-6937
Email: info@esda.org
For other forms of payment Contact:
Shenzhen BEST-RESOURCE Consulting Co.,Ltd.
Flr 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian
Rd, Fuyong Town, Baoan District, Shenzhen, China.
TEL: +86-755-86182990
FAX: +86-755-86183100
Http://www.esd-resource.com
Email: vip.customer@esd-resource.com
Last Name: First Name:
Company Name:
Street: City:
State/Province: Country: Zip/Postal Code:
Phone: Email:
Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
Register Online at www.esda.org/events/calendar/
Tutorials March22-24,2017 6650 RMB /1020 USD
Payment Information
Credit card number: Security code:
Name on card: Expiration date:
Cardholder’s signature:
Billing Address
City: State: Zip/Postal Code: