Intze Overhead Water Tank Design by Working Stress - IS Method.pdf
presentation quantity survey and estimate
1. 1. Understanding the Role of BHADANI’S Quantity Surveying In
the Construction Industry Checklist of Execution of Civil
Works at Site.
2. Construction Methodologies of Civil Works and How it
works in the Construction Industry.
Making Project Chartered and Feasible Reports
Project Risk Analysis and Action Reports
3. Quantity Take off From the Drawings Like PCC, RCC,
Reinforcement , Shuttering etc.
4. Quantity Take off From the Architectural Drawings (Like
Brickwork, Plaster , Painting , Putty Work Etc.)
5. Faster Take Off Methodologies From Drawings of Civil
6. Analysis of All Kinds of Civil Drawings with Proper
Presentation in Excel Formats
7. Management Information System (MIS) Generation and
Preparation in proper Formats as per IS Standards
8. Estimation of All Kinds of Civil Works (Like Buildings and
Roads)
9. Calculator Making of Concrete, Steel Brick, Plaster , Painting
Etc.
10. Pre- Engineered Building (PEB) Estimation
11. Costing Techniques of All Kinds of Civil Works (Concrete
work, Brickwork, Earthwork, Finishing Work, Wood Work,
Steelwork, Demolishing Works Etc.)
12. Labour Deployment Planning As per Budget
13. Labour Output Analysis as per IS Code , Schedules of Rates
and As per BHADANI’S Techniques
14. Machinery Output Analysis as per Market Standards
15.Profilt and Loss Analysis in Labour and Machinery
16. Daily Work Report (DWR) Preparation as per Quantity
Surveyor Standards
17. Bar Bending Schedules of all RCC Structures Like Footings,
Columns, Beams, Slabs and Through AutoCAD
18. BOQ (Bill of Quantity) Material Take Off
19. Rate Analysis of All Kinds of Civil Works
20. Material Reconciliation Techniques both from Contractor
and Client Side
21. Material Procurement Strategies as per the techniques used
in Quantity Surveying
22. Free Lance Quantity Surveying with Hands on Practice
2. 1. Understanding the Role of Billing Engineer / Invoice Engineer
in Construction Industry of India and World
2. Accounts Basics requirement for Billing Engineer
3. Construction Billing Procedures from Client Side
as well as Contractor Side
4. Interim Payment Certification (IPC) From Both Sides.
5. RA Bill Making - Client Billing – Subcontracting
6. Billing with GST and without GST
7. CPWD and Corporations and PSU’sTechniques of Billing
8. Invoice Generation through ERP
9. Claim and Dispute Settlement Procedures and all required
techniques in Billing and MIS Generation for the same.
10. Material Engineering Bills For Both Client and Contractor Side
11. Third Party Contractor Billing
12. Joint Venture Companies / Contracting Billing
13. Petty /Vendor Billing
14. Preliminary Billing – Post Construction Billing
15. InterAlia Billing , International BillingChallan Generation
16. Claim Management Procedures used by Invoice Engineers.
17. Claim of PriceVariations as per the Norms of Govt. of INDIA
18. Claim of QuantityVariations as per the Norms of Govt. of INDIA
19. Mode of Measurement as per the IS Codes with Nomenclatures
20. Claim of Extra Item Analysis of all Kinds of CivilWorks During
the Site Execution as well as Post Contracting Period.
21. VendorVs Client Bill Reconciliation
22. Billing Engineering Tasks at Site Office and Understanding
the Role in Head Office with the Client Coordination