This document provides an overview of ENDEVOUR's oilfield services including: directional drilling, mud logging, non-destructive testing, casing running, drilling fluid services, engineering, equipment rental, leak repair, project management, and civil engineering. ENDEVOUR has experience designing and drilling wells over 6,750 meters deep and directional wells with deviations over 460 meters. They provide services for exploration and development drilling in Ukraine.
4. endv.com
ISO 9001
IWCF Certified
Drilling Supervisors
NDT Inspectors are certified by
ASNT Level II and Ukrexpert Association
DS-1
Compliance
Certified
Civil Engineers
5. endv.com
One of the deepest wells in
Ukraine, 6750m (22150ft) was
Designed and Accomplished
5 wells
completed
3 wells under
construction
4 wells
preparing
Bicenter drill bits
usage experience
Up to 1000m (3300ft)
distance from axis
12GASWELLSDESIGNED
8verticalwells
4directional
wells
8wells–5000m(16400ft)
to6000m(19700ft)
3wells–
>6000m
1 well
6. endv.com
Boring Management, Administration of
Drilling Contractors
Progress Reports preparation, Daily and
Monthly Reports preparation
Control of Productivity
Indexes, Recommendations for
Optimization development
0
1000
2000
3000
4000
5000
6000
7000
4655m
4220m
5450m
5650m
6750m
5750m
5615m
5243m
5625m
5123m
5735m
5470m
Experience in IPM including:
12 wells with total depth
>65000 meters (213000 ft);
Exploration of Non-Conventional
Gas Fields;
International Standards
compliance, IWCF Certification;
Engagement of Foreign
Supervisors;
Directional Wells with 460m (1500ft)
Deviation;
Abnormal Formation Pressure –
150MPa (22ksi) on 6740m (22000ft);
5750m long 91/2” Casing Running;
Salt Deposits baring.
7. endv.com
ENDEVOUR is an official
representative of
NATIONAL OILWELL VARCO
on Ukrainian market
Sole Experience of
Bicenter Drill Bits
Run in Ukraine
Drill-bit Programs development
Engineering Support
Bits Supply
Footage Rate Payment
Final Reports
8. endv.com
Well Profile and Bottomhole Assembly design
Gamma Ray Logging capability
Rent and Supply of Drilling Equipment for
Directional and Horizontal Drilling:
Drill Bits, Mud Motors, Jars
Running Time – 200 hours
Peak Temperature – 100 ºС
9. endv.com
“Windows” milling in Casing and
Sidetracking in difficult
drilling conditions
Well Profile and Bottomhole Assembly design
Engineering Support while Sidetracking
Rent and Supply of Equipment :
Mills, Whipstocks, Anchors, Pipe Cutters, etc.
One- and Double-run Systems
with(out) support on
Borehole Bottom
or Cement Bridging
10. endv.com
Automatic Data Gathering, on-line
Processing and Interpretation of
Geological, Geochemical and
Technological Information While
Drilling
Highlighting of Reservoirs, Saturation
Character Estimation
Licensed Software
«GeoData» & «Well Data Pro» «GEOTEST-5» Station:
Technological Module
Mud Logging Unit
Geological Module
Accidents and Complications
prevention
Drilling Control and Assessment
of a Situation
Optimal Hole Making,
high Geological Efficiency
On-line Video Surveillance
on the Drilling Site+
11. endv.com
Hydraulic Tongs with
Hydraulic Electrically-driven
Power Station
Ø5”–133/8’’ (127,0–339,7 mm)
Max Torque Moment – 37kNm
Torsion Moment Control with Electronic Reports
MORE THAN 100 000 METERS (330 000ft)
OF CASING EXPERIENCE
Supply of Casing
Equipment, Spiders fnd
Elevators, Lubricating
Sealing Materials
12. endv.com
STANDARDS:
DS-1 Volume-3
API
GOST
CERTIFICATES:
ASNT Level II
«Ukrexpert»
Inspection of Drill Pipes, Tubing, Casing,
Bottomhole Assembly Elements, Subs, etc.
Nondestructive Testing of Fishing
Tools, Round Trip Machinery, etc.
TESTING METHODS:
Visual And Dimensional
Liquid Penetrant
Ultrasonic
Magnetic Particle
Electromagnetic
16. endv.com
Process Control Systems of any Complexity
Early Warning Systems
MES
Video Surveillance Systems
Siemens, Vipa, Phoenix Contact, SoftLink Hardware
Design of Buildings and Structures
General Contractor’s Service in
Civil Engineering