1. | P a g e
1
Islam Abd El Naby Khalil Youssif.
Building (2),fayrouzet smouha compound-EL NAKL WEL HANDASA street-
Smouha – Alexandria, Egypt.
Telephone: 03/4224158, Mobile phone: (+2)01005042625.
E-mail: islam_naby@hotmail.com
Job Responsibilities:
 Development and implementation of Preventive maintenance schedules
for equipment.
 Review of Project specifications and P&ID in the contract.
 Supervising on receipt, inspection, checking and storage of materials.
 Reviewing piping Isometric drawings and Receipt of the piping systems (supports, hydro-
test, insulation &painting).
 Supervising on hydrostatic, flushing, and start-up testing for piping.
 Follow-up performance and operation of the equipment.
 Preparation of spare parts needed for preventive maintenance and overhauls.
 Preparation of field piping system test packages; including system limits on P&ID and piping
Isometrics at construction of the project.
 Help in temporary site services layout and design.
Educational Background:
 Arab Academy for science and technology and maritime transport.
 Faculty of Engineering - Bachelor degree in Electro-mechanical engineering.
 Graduation Year : July 2010
 Grade : very good
 Graduation Project: Electric Elevator.
 Project Grade: Excellent.
Work Experience:
 Current Job Title:
Mechanical Maintenance Engineer
 Employer:
West Delta Electricity Production – Abu Qir Power Station new project 2*650MW.
 Plant description:
Abu Qir Thermal Power Plant consists of the following major Components:
Two steam turbine generating units 650 MW each, two dual fuel fired steam
generators. Desalination Plant: This consists of 2 units using MED technology with
capacity of 10,000 m3/day.
 From: October 2011 till present time.

2. | P a g e
2
Islam Abd El Naby Khalil Youssif.
Job description
 Supervising on receipt, inspection, Reviewing piping Isometric drawings and Receipt of the piping
systems (supports, hydro-test, insulation &painting)for the following contracts:
 CP-106: Steam Turbine Generator and Condenser, Consortium of Mitsubishi Heavy
Industries, Ltd, and Toyota Tsusho Corporation
 CP-107: Yard Tanks, The port said engineering works (PSEW)
 PO-109: Pumps and Drives, SULZER
 PO-110: Feed water Heaters, Consortium of LG International Corp. and BHI CO, LTD.
 PO-112: Critical Piping, Seonghwa Industrial Co., Ltd, South Korea
 CP-118: Mechanical equipment / Pipe installation, Consortium of AVIC and ZTPC.
 Firefighting contract:
 Wet pipe automatic sprinklers system.
 Automatic INERGEN system for the control building (INERT Natural Gases).
 Foam water system & cooling system for tanks.
 Wet Standpipe and Hose Systems.
 Water deluge system for (9) Electrical transformers"500kv" & steam turbine lube oil.
 Per-action system for steam turbine and generator.
 Underground fire piping and private Hydrant.
 Follow up & supervising of repair, scheduled and preventive maintenance for the following
equipment:
 Air Compressors (Reciprocating – Centrifugal), Air Receiver &Air Dryers.
 Hydrogen compressors.
 Steam Turbine and generator: Mitsubishi heavy industries, LTD (2*650 MW) (three
cylinder HP-IP, LP1 and LP2 with 24 KV generator hydrogen and stator cooling water
system and turbine auxiliaries).
 Centrifugal Pumps (Single Stage – Multi Stage).
 Axial Flow Pumps, Vertical & sump Pumps.
 Positive Displacement Pumps (Gear – piston -screw).
 Reciprocating engine (diesel generator & diesel fire pump).
 Heat Exchangers (Heaters – Coolers).
 Ultrasonic inspection &scheduled thickness survey for all plant piping.
 Supervision for HVAC and Firefighting Systems for the following equipment:
 30 DX package units- type (240000 BTU/H & 180000BTU/H).
 72 DX wall split units- type (60000 BTU/H, 36000BTU/H & 24000BTU/H).
 54 exhaust fan units-type (axial-vertical).
 3 Air handing units-type (55000 m3/hr).
 5 chilled water units- type (45 TR).
 50 fan coil units- type (600 CFM).
 33 fan coil units-type (400 CFM).
 6 Centrifugal pumps (106 GPM).

3. | P a g e
3
Islam Abd El Naby Khalil Youssif.
(From September2010 to October 2011)
Inspection Engineer
INSPECTA Middle East Company for Quality Service MIDDLE EAST OIL REFINARY COMPANY
(MIDOR)
NDT Inspector
 Thickness survey for tanks, pipe lines & equipment’s.
 Ultrasonic test for pipe lines welds with different thickness.
 Magnetic Particle Test.
 Liquid Penetrating Testing.
 Heat treatment for pipes welding.
Certifications:
 Completed an English Conversation Course at the British Academy with grad Excellent.
 Visual testing –Level II according to SNT-TC-1A.
 Cartronics work shop at AAST from 2/2/2008 to 13/2/2008.
 Infinity Training & Development ,Alexandria ,Egypt from 15/12/2011 to 28/1/2012 training
on HVAC system( Design ,Installation and Maintenance).
 Preparation course for API 570 authorized piping inspector from 20/5/2013 to 3/6/2013.
 On shore Turbine maintenance and operation training at Mitsubishi Heavy Industries, Ltd.
Nagasaki Shipyard & machinery from 12/2/2012 to 18/4/2012.
 Diesel engines course at West delta Electricity company training center from February 2015
till March.
Training:
 Mercedes-Benz (MCV) from 1/7/2008 to 30/8/2008.
 MANTRAC Company (CAT) from 26/7/2009 to 13/8/2009.
Language skills:
 Arabic: Mother tongue
 English: very good Spoken & Written.
Computer Skills:
 Microsoft office.
 Auto Cad 2013 (2D).
 HAP software.
Personal Data
 Nationality : Egyptian
 Marital status :Married
 Military service : Exempted
 Driving License : Valid
References are available upon your request.