Match each statement to the most appropriate choices. More than one .pdf

•

0 likes•2 views

Match each statement to the most appropriate choices. More than one choice may be appropriate. Choices: A – System Call B – Library Function C – User Program Statements: Enters the OS kernel via a trap instruction ______ Code is stored in user space ______ Code is stored in kernel space ______ Switches the processor to kernel (supervisor) mode ______ Encapsulates (wraps) other functions ______ Always starts at a fixed physical memory address ______ Returns control to user space once finished ______ Pushes library function arguments onto program stack ______ Calling convention is highly machine dependent ______ Implements the POSIX standard ______ Solution A) System call - Switches the processor to the kernel (supervisor) mode B)Library function - Returns control to user space once finished C)User program - code is stored in kernel space.

Education

Similar to Match each statement to the most appropriate choices. More than one .pdf

Introduction to System Calls

Vandana Salve

Lec 3

mohamed ali

IT241_TEST.BANK مرتب (2).pdf

SHEHABALYAMANI

Exploiting Llinux Environment

Enrico Scapin

Unit 6 Operating System TEIT Savitribai Phule Pune University by Tushar B Kute

Tushar B Kute

First steps on CentOs7

Marc Cortinas Val

This session focuses on key system tunables for maximizing application performance of high-performance computing (HPC) workloads, and addresses porting, optimizing, and running applications to maximize performance. We present practical tips and techniques for building and running applications on multicore processors. We analyze sample performance and scaling data from various applications, and identify the best options.

Best Practices and Performance Studies for High-Performance Computing Clusters

Intel® Software

Basic Linux Internals

mukul bhardwaj

Part 04 Creating a System Call in Linux

Tushar B Kute

Talk 160920 @ Cat System Workshop

Quey-Liang Kao

SO-Memoria.pdf

Kadu37

SO-Memoria.pdf

ssuser143a20

Cruz:Application-Transparent Distributed Checkpoint-Restart on Standard Oper...

Mark J. Feldman

Runos OpenFlow Controller (eng)

Alexander Shalimov

Aca 2

parbhatverma

FlexSC

YongraeJo

Emulation Error Recovery

somnathb1

Linux Internals - Part II

Emertxe Information Technologies Pvt Ltd

Development of Signal Processing Algorithms using OpenCL for FPGA based Archi...

Pradeep Singh

chapter2.pptx

PardhisCreation

Similar to Match each statement to the most appropriate choices. More than one .pdf (20)

Introduction to System Calls

Lec 3

IT241_TEST.BANK مرتب (2).pdf

Exploiting Llinux Environment

Unit 6 Operating System TEIT Savitribai Phule Pune University by Tushar B Kute

First steps on CentOs7

Best Practices and Performance Studies for High-Performance Computing Clusters

Basic Linux Internals

Part 04 Creating a System Call in Linux

Talk 160920 @ Cat System Workshop

SO-Memoria.pdf

Cruz:Application-Transparent Distributed Checkpoint-Restart on Standard Oper...

Runos OpenFlow Controller (eng)

Aca 2

FlexSC

Emulation Error Recovery

Linux Internals - Part II

Development of Signal Processing Algorithms using OpenCL for FPGA based Archi...

chapter2.pptx

More from ARCHANASTOREKOTA

Please help! Computer Science C++ programming code needed. Thank you! Solution interface MyListADT { void add(T var); void add(T var,int pos); void display(); T remove(int pos); void clear(); boolean contains(Object o); } interface MyListADT { void add(T var); void add(T var,int pos); void display(); T remove(int pos); void clear(); boolean contains(Object o); }interface MyListADT { void add(T var); void add(T var,int pos); void display(); T remove(int pos); void clear(); boolean contains(Object o); }.

Please help! Computer Science C++ programming code needed.Thank yo.pdf

ARCHANASTOREKOTA

Please Answer, will rate! Exercise 1 - Classifying financial statement items: Below is a list of financial statement items. For each item, mark whether is part of assets (A), liabilities (L), shareholders’ cquity (SE), Revenue (R), or expense (E). (A) / (L)/ (SE) / (R)/ (E) Item: (1) Accounts payable (2) Accounts receivable (3) Cash and cash equivalents (4) Common Stock (5) Cost of goods sold (6) Dividends Payable (7) Income taxes (8) Interest expense (9) Inventories (10) Land (11) Net sales (12) Notes payable (13) Notes receivable (14) Property, plant, and equipment (15) Research and development expense (16) Retained earnings (17) Taxes Payable Solution Answer: 1 Accounts Payable (L)Liability 2 Accounts receivable (A) Assets 3 Cash and cash equivalents (A) Assets 4 Common stock (SE) Stock Holder\'s Equity 5 Cost of Goods sold (E)Expanses 6 Dividend payable (L)Liability 7 Income tax (E)Expanses 8 Interest Expanses (E)Expanses 9 Inventories (A) Assets 10 Land (A) Assets 11 Net sales (,R)revenue 12 Notes payable (L)Liability 13 Notes Receivable (A) Assets 14 Property Plant equipment (A) Assets 15 Research and development Expanses (E)Expanses 16 Retained earning (SE) Stock Holder\'s Equity 17 Taxes payable (L)Liability 1 Accounts Payable (L)Liability 2 Accounts receivable (A) Assets 3 Cash and cash equivalents (A) Assets 4 Common stock (SE) Stock Holder\'s Equity 5 Cost of Goods sold (E)Expanses 6 Dividend payable (L)Liability 7 Income tax (E)Expanses 8 Interest Expanses (E)Expanses 9 Inventories (A) Assets 10 Land (A) Assets 11 Net sales (,R)revenue 12 Notes payable (L)Liability 13 Notes Receivable (A) Assets 14 Property Plant equipment (A) Assets 15 Research and development Expanses (E)Expanses 16 Retained earning (SE) Stock Holder\'s Equity 17 Taxes payable (L)Liability.

Please Answer, will rate! Exercise 1 - Classifying financial stateme.pdf

ARCHANASTOREKOTA

Need 2 -3 paragraph Considering the aesthetics of the late 19th century, how, in your opinion, did 19th century artists influence Modernism in the 20th century? Use at least one example of 19th century art in your response as a basis for your analysis. Solution Modernism : it is a philosophical development that, alongside social patterns and changes, emerged from wide-scale and expansive changes in Western culture amid the late nineteenth and mid twentieth hundreds of years. Among the elements that formed innovation were the improvement of present day modern social orders and the quick development of urban areas, took after then by responses of ghastliness to World War I. Innovation additionally dismisses the conviction of Enlightenment considering, and numerous pioneers rejected religious conviction. An eminent normal for innovation is reluctance and incongruity concerning scholarly and social conventions, which regularly prompted to explores different avenues regarding structure, alongside the utilization of methods that attracted consideration regarding the procedures and materials utilized as a part of making a canvas, ballad, building, and so on. modernism unequivocally dismisses the philosophy of authenticity and makes utilization of the works of the past by the work of repeat, joining, modifying, reiteration, update and farce. Present day specialists explored different avenues regarding better approaches for seeing and with crisp thoughts regarding the way of materials and elements of workmanship. An inclination far from the account, which was trademark for the customary expressions, toward deliberation is normal for much present day craftsmanship. Later imaginative generation is frequently called contemporary craftsmanship or postmodern workmanship..

Need 2 -3 paragraphConsidering the aesthetics of the late 19th cen.pdf

ARCHANASTOREKOTA

List three sources of variability in material properties. If that variability can be reduced, describe how. Solution Homogeneous materials: A material of uniform composition throughout that cannot be mechanically separated into different materials. Examples of homogeneous materials are certain types of plastics, ceramics, glass, metals, alloys, paper, board and resins. Isotropic materials: Isotropic material means a material having identical values of a property in all directions. Glass and metals are examples of isotropic materials. Anisotropy materials: It is a term used in various scientific disciplines to indicate that certain properties of matter (such as a material or radiation) vary with the direction from which they are measured. For instance, if the refractive index or density of a material is different when measured along different axes, that property is said to be anisotropic.Anisotropy is the opposite of isotropic, a term used when properties are the same when measured from any direction. Orthotropic materrials: In materials science and solid mechanics, orthotropicmaterials have material properties that differ along three mutually orthogonal twofold axes of rotational symmetry. They are a subset of anisotropic materials, because their properties change when measured from different directions. A design is expected to have a good concept about mechanical properties of materials. Different manufacturing methods and heat treatment can change the materials properties. Engineering materials are divided as follows:- 1. Metal and Metal Alloys; Example: Iron, Copper, Nickel etc. 2. Non- Metals; Example: Ceramics, rubber, glass etc. Important Mechanical Properties of Materials are Described Below a. Strength: This describes the ability to resist any external force. Without Yielding (Yield point is that point at which plastic deformation starts) breaks. b. Stiffness: This is measured by modulus of elasticity. It is ability of the material to prevent deformation when stress is applied. There are many mechanical properties are present . The mechanical properties of a materialare those which effect the mechanical strength and ability of material to be molded in suitable shape. Some of the typical mechanical properties of a material are listed below- Strength Toughness Hardness Hardenability Brittleness Malleability Ductility Creep and Slip Resilience Fatigue.

List three sources of variability in material properties. If that va.pdf

ARCHANASTOREKOTA

Need the fill in the blank questions answeredSolution1) CamboB.pdf

ARCHANASTOREKOTA

making and testing a prediction suppose that after 22 months, guppies from the transplanted population were returned to the source pool.what would most likely happen to those guppies. Solution Answer: 1) Due to habitat change the feeding frequency affect 2) Predation problem: Guppies have many predators, such as larger fish and birds, in their natural habitats. Some of their common predators in the wild are Crenicichla alta, Anablepsoides hartii, and Aequidens pulcher. Guppies\' small bodies and the bright coloration of males make them easy prey, and like many fish, they often school together to avoid predation..

making and testing a prediction suppose that after 22 months, gupp.pdf

ARCHANASTOREKOTA

Life is wholly dependent on water. List and discuss two reasons why this is?!! Solution Life is wholly dependent on water because, 1). Plants get the carbon dioxide necessary for photosynthesis in exchange with water 2). Animals use water in several ways such as, to transport the molecules in the body, to maintain body temperature, to excrete the waste, etc. As plants are the primary producers, their survival is the key for survival of the remaining organisms. The biological cycle will be terminated if there is no water because the platn\'s survival needs water..

Life is wholly dependent on water. List and discuss two reasons why .pdf

ARCHANASTOREKOTA

John Rawls argued that society\'s goal should be to lessen the welfare of the most well off property rights should be equally distributed among all citizens. Solution Rawls refers to “the two principles of Justice as Fairness,” but the second has two parts. These principles address two different aspects of the basic structure of society: the “First Principle” addresses the essentials of the constitutional structure. It holds that society must assure each citizen “an equal claim to a fully adequate scheme of equal basic rights and liberties, which scheme is compatible with the same scheme for all.” So answer here will be B..

John Rawls argued that societys goal should be to lessen the welfar.pdf

ARCHANASTOREKOTA

In Exercises 19-24, find the volume of the solid generated by revolvi.pdf

ARCHANASTOREKOTA

In which step of meiosis, the members of tetra separate Solutio.pdf

ARCHANASTOREKOTA

Identify the distinguishing characteristics of member of Phylum Cnidaria, including symmetry, number of embryonic tissue layers, unique structures, skeleton and polymorphism (polyp and medusa), place Cnidaria on a cladogram Compare and contrast how a general polyp and a medusa feed Describe why a nerve net was such a major evolutionary adaptation Describe the characteristics of the four classes of Cnidarians Label the following on a drawing: tentacles, mouth, anus, gastrovascular cavity, cnidocytes, nerve net Solution Answer1) Symmetry- Radially symmetrical body Number of embryonic tissue layers- two (endoderm and ectoderm) Unique structures- Stinging cells (Cnidocytes) Skeleton- Hydrostatic skeleton Polymorphism (polyp and medusa)- polyp is a flower like solitary form and medusa is a free- floating miniature of cnidarians. Answer 2) a tubular shaped body form is called as polyp. They are sessile and are found as attached bottom (basal plate) to a solid surface with the opened mouth at the top. while medusa is an umbrella or bell shape form, having their mouth facing downwards. And they are free floating. Being a sessile, polyp filter their food from the water by their tiny-beating cilia. While medusas are free floating and motile so they can trap their feedings, and need not to filter the water all the time though these structures were more related to the sexual reproduction. Answer 3) Nerve net is a diffused framework of neurons in the body which can transmit signals/impulse in different directions from a single point of stimulus. This became a major evolutionary adaptation because it allowed the organism to sense the environmental stimulus from any region of its body and respond accordingly. This allowed the readily development and motion of different body parts such as limb like structures. Answer 4) These are the four classes of cnidarians. Hydrozoa are diploblastic and multicellular animals. Which has only mouth opening. They have a fixed polyp stage and the reproductive medusa stage. They have the gonads as well. Scyphozoan are present in medusoid forms. They have tentaculocysts as Sense organs. They have Velarium in endodermal canal (Acraspedote). They endodermal gonads. Anthozoan are present only in polyp forms. Their medusa stage is absent. They have Mesenteries which bear nematocyst. They also possess endodermal Gonads. Cubozoan looks like the jelly fish and called as jelly boxes. They possess box shaped medusa and they share typical characteristics of scyphozoans..

Identify the distinguishing characteristics of member of Phylum Cnid.pdf

ARCHANASTOREKOTA

If most evolutionary change occurs during and immediately after speciation, could speciation rates and extinction rates explain major patterns in macroevolution? In turn, what factors may influence speciation and extinction rates (are they all biological, or can geological / meteorological / astronomical factors also play a role)? Solution In the course of evolution, some mutations keep on occurring with every replicative step. These mutations lead to differences in alleles, which further result in different genotypes. Some genotypes have higher fitness while others have lower fitness. Natural selection selects the phenotypes which have higher fitness, and slowly discards the others during the course of evolution. So, extinction rate depends on fitness and natural selection. As new phenotypes are selected, they result in formation of new species; the process is known as speciation. Speciation further results in evolution. Higher the speciation rate, higher will be the rate of evolution. So, you can say that most evolutionary changes occur during and after speciation. Overall the biological factors affecting speciation and extinction rates are: It is important to note that that apart from the above two factors, geological/astronomical factors also affect speciation, extinction and evolution. Changes in the earth since times immemorial ultimately resulted in changes like:.

If most evolutionary change occurs during and immediately after spec.pdf

ARCHANASTOREKOTA

Imagine that someone picking up roses in a garden gets a scratch from a thorn. Some bacteria (Staphyloccocus aureus and Streptococcus pyogenes) take advantage of the wound to gain access to the deeper layers of the skin and attempt to cause an infection. Describe the different stages of the host response (in particular the types of cells and receptors involved) and how the bacteria will be recognized and eliminated. Solution The superficial staphylococcal and streptococcal infections are very common in skin. The physiological condition of the skin is much suitable to these bacteria. Both these bacteria are potent toxin and enzyme producing strains. S.auresus infection on the skin immediately stimulates the inflammatory response and macrophages and neutrophils are proliferated at the site of infection. The organism can enter the body through openings in the skin barrier like hair follicles and can cause infections like folliculitis, pimples, furuncle which is type of abscess. The furuncles also damage the neighboring tissue by invading deep in to the tissue. This is known as carbuncle. Staphylococci cause a highly contagious skin infection in children known as impetigo. The impetigo is two types-nonbullous impetigo is caused by both S.aureus and S.pyogenes; bullous impetigo is caused by staphylococcal toxin. It is also known as staphylococcal scalded skin syndrome. At later stages of toxic shock syndrome the scalded skin syndrome is the characteristic feature. Streptococci also secrete toxin and enzymes. The toxins are called hemolysins that lyse the red blood cells. Various hemolysins like alpha, beta and gamma are produced by various streptococcus strains. S.pyogenes is an important beta hemolytic streptococcus. Streptococcus skin infections are generally superficial but some times may reach the deeper tissues also. S.pyogenes infects the dermis of the skin and also causes a disease known as erysipelas in which the skin erupts in to reddish patches. The skin scraping is cultured and stained to observe the bacteria under microscope. Staphylococci and streptococci both are gram positive and round shaped bacteria. The staphylococci occur as grape-like clusters (Staphylococci name indicates bunch of grapes in Greek). The streptococci are arranged in chains or pairs. Topical antibiotics like Mupirocin and oral antibiotics like first generation cephalosporins and erythromycin are used to eliminate the bacteria..

Imagine that someone picking up roses in a garden gets a scratch fro.pdf

ARCHANASTOREKOTA

I need help working out this question . woman has normal vision although her maternal grandfather (her mother’s father) had red- green colorblindness, a sex-linked recessive trait. Her maternal grandmother and the woman’s own father are assumed to not possess a copy of the mutant allele. The woman marries a man with normal vision although his father was colorblind. What is the probability that the first child of this couple will be colorblind? Solution As it is x linked inheritance, the genotype of women is either xx = Normal or xxc =Carrier for disease. If she is carrier (xxc) and married normal man, then the probability of 1st chaild getting colour blindness is 1/4 = 0.25 Color blind ness is x linked and it inherit criss cross manner. That mean, male transfer color blindness to her female children and. female transfer her male children. XXc x XY ----------------> XX, XY, XXc & XcY XcY progeny is only colour blind. So probability is 1\\4.

I need help working out this question . woman has normal vision al.pdf

ARCHANASTOREKOTA

I have a Programming is Binary Tree Search (BTS) for strings with pointers, but I do not know how to change BTS for strings using arrays. Can you help me to change the method, please? This is programming: #include #include #include using namespace std; struct myNode { string data; struct myNode *lNode; struct myNode *rNode; } *roNode; class myBTS { public: void seek(string, myNode **, myNode **); void add(myNode *, myNode*); void rem(string); void caseOne(myNode *, myNode *); void caseTwo(myNode *, myNode *); void caseThree(myNode *, myNode *); void print(myNode *, char); myBTS() { roNode = NULL; } }; // Main method int main () { int myOptions; string rData; myBTS mybst; myNode *tmp; while (1) { cout << \"-----------------------------------------\" << endl; cout << \"Welcome to Binary Search Tree Programming\" << endl; cout << \"-----------------------------------------\" << endl; cout << \"1. Add Data \" << endl; cout << \"2. Remove Data \" << endl; cout << \"3. Print Data \" << endl; cout << \"4. Exit \" << endl; cout << \"Enter Option : \"; cin >> myOptions; switch(myOptions) { case 1: tmp = new myNode; cout << \"Enter data to add : \"; cin >> tmp->data; mybst.add(roNode, tmp); break; case 2: if (roNode == NULL) { cout << \"Tree empty!!!\" << endl; continue; } else { cout << \"Enter data to remove: \"; cin >> rData; mybst.rem(rData); } break; case 3: cout << \"Print Tree:\" << endl; mybst.print(roNode,1); cout << endl; break; case 4: exit (1); default: cout << \"Wrong Option!!!\" << endl; } } } // Data in BTS void myBTS::seek(string sData, myNode **myPar, myNode **myLoc) { myNode *ptr1, *ptr2; if (roNode == NULL) { *myLoc = NULL; *myPar = NULL; return; } if (sData == roNode-> data) { *myLoc = roNode; *myPar = NULL; return; } if (sData < roNode-> data) ptr1 = roNode->lNode; else ptr1 = roNode-> rNode; ptr2 = roNode; while (ptr1 != NULL) { if (sData == ptr1->data) { *myLoc = ptr1; *myPar = ptr2; return; } ptr2 = ptr1; if (sData < ptr1 -> data) ptr1 = ptr1 ->lNode; else ptr1 = ptr1 -> rNode; } *myLoc = NULL; *myPar = ptr2; } // Add Data into BTS void myBTS::add(myNode *myTree, myNode *myNewNode) { if (roNode == NULL) { roNode = new myNode; roNode -> data = myNewNode ->data; roNode -> lNode = NULL; roNode -> rNode = NULL; cout << \"Root data is added successfully\" << endl; return; } if (myTree -> data == myNewNode -> data) { cout << \"Data already in BTS\" << endl; return; } if (myTree -> data > myNewNode -> data) { if (myTree ->lNode != NULL) { add (myTree -> lNode, myNewNode); } else { myTree -> lNode = myNewNode; (myTree -> lNode) -> lNode = NULL; (myTree -> lNode) -> rNode = NULL; cout << \"Data added to the Left successfully\" << endl; return; } } if (myTree -> rNode != NULL) { add(myTree -> rNode, myNewNode); } else { myTree -> rNode = myNewNode; (myTree -> rNode) -> lNode = NULL; (myTree -> rNode) -> rNode = NULL; cout << \"Data added to the Right successfully\" << endl; return; } } //Remove data from BTS void myBTS:: rem(string sData).

I have a Programming is Binary Tree Search (BTS) for strings with po.pdf

ARCHANASTOREKOTA

How is ATP produced in mammalian cells under aerobic conditions? 1. photophosphorylation 2. oxidative phosphorylation 3. substrate-level phosphorylation 4. phosphorolysis a. 1 b. 2,3 and 4 c. 2 d. 1 and 2 e. 2 and 3 Solution Hi, 4.Phosphorolysis: in this process cleavage of a compound where attacking group is phosphate. Hence by analysing above explanation it is obvious that only option c. 2 (oxidative phosporylation) is correct. I hope my answer is satisfactory. Thanks!!.

How is ATP produced in mammalian cells under aerobic conditions1..pdf

ARCHANASTOREKOTA

How con osmosis work for and against homeostasis? How do osmosis and diffusion relate to dialysis? (Short paragraph o fine) Solution Multi cellular organisms should maintain a balance between internal and external environments to carry out proper metabolic activities. The maintenance of relatively stable environment internally is known as homeostasis. All the body functions carried out by various systems of the body contribute to the homeostasis to maintain a stable environment in the body for its survival and function. Homeostasis is much required and the vital force for the each cell and through performing specialized activity, each cells maintain a stable internal environment. The net diffusion of water down the concentration gradient through the selectively permeable membrane is called osmosis..

How con osmosis work for and against homeostasis How do osmosis .pdf

ARCHANASTOREKOTA

Enzymes and KE. What\'s the relationship in terms of substrate molecules Enzymes and KE. What\'s the relationship in terms of substrate molecules Solution ANS: Enzyme KE(kinetic energy)and substrate molecules relationship: When the temperature raises the kinetic energy of reactants is also raised, increasing in temperature results in higher activation energy molecules and more molecular (enzyme and substrate) collision and interaction for the reaction to proceed faster. The enzymes present in the human body usually need 37.5 o C (optimal temperature). The optimum temperature for most of the enzymes between 40-45o C. In this condition rate is increased. Increasing substrate concentration means an increasing rate at which the enzyme and substrate molecules encounter one another In general, the enzymes are exposed to a temperature above 50 o C, denaturing leading to derangement in native structure. Majority of enzymes became inactive at higher temperature above 70 o C In enzymes at higher temperatures intra and intermolecular bonds are broken down, so the enzyme molecules gain even more kinetic energy. After reaching the maximum point, the rate of the reaction suddenly fall down due to the enzyme degradation..

Enzymes and KE. Whats the relationship in terms of substrate mo.pdf

ARCHANASTOREKOTA

Explain membranes. Include the definition and name the four types and which tissues each type contains. Solution Answer : Membranes are the flat sheets of pliable tissue that cover or line a part of the body. The combination of an epithelial layer and an underlying connective tissue layer constitutes an epithelial membranes. These includes, Mucous membranes : These membranes lines the body cavity that opens directlyto the exterior. Mucous membranes lines the entire digestive, respiratory and reproductive tracts and much of the urinary tract. Serous Membranes : A serous membrane or Serosa lines a body cavity that does not open directly to the exterior and it covers the organs that lie within the cavity.serous membranes consist of areolar connective tissue covered by mesothelium and also consists of two layers such as Parietal and visceral layer. Cutaneous Membrane : These membarnes covers the surface of the body and consists of a superficial portion called the epidermis and a deeper portion called the dermis. Synovial Membranes : Like serous membranes, synovial membranes line structures that do not open to the exterior. They lack in epithelium and are composed of discontinuous layer of cells called synoviocytes, which secretes synovial fluid. Synovial fluid lubricates and nourishes the cartilage covering the bones at movable joints and contains macrophages that moves microbes and debris from the joint cavity..

Explain membranes. Include the definition and name the four types an.pdf

ARCHANASTOREKOTA

Define 1. Reciprocal cross – 2. True or pure-breeding – Fill in the Blank 3. When trying to calculate the probability that two independent events will occur together you should _____________________ the individual probability of each event. 4. When crossing dihybrid peas, Mendel noticed that there were four phenotypic types amongst the resulting F2 progeny; two had the phenotype of the parental generation and the other two were ___________________. True or False 5. The dominant trait is that which is masked in the F1 generation resulting from a cross between true breeding parents. 6. Mendel’s law of segregation says that during gamete formation different pairs of alleles segregate independently of each other. Short Answer 7. Calculate the probability of A.) drawing a 4 from a deck of playing cards, B.) Drawing a black 4 and a red 8 from a deck of playing cards, C.) drawing a king, queen, or jack and the ace of spades from a deck of playing cards. (Show your work.) 8. A. is this an autosomal, X linked or Y linked trait? B. Is the transmission of this trait dominant or recessive? C. what is the genotype of individual II-2? 2 2 3 4 2- 1 ! 1 1 Solution 1. Reciprocal cross: a pair of crosses between a male of one strain and a female of another, and vice versa. 2. True or pure-breeding:True breeding means that the parents will also pass down a specific phenotypic trait to their offspring. Remember that a phenotype is the outward appearance of something. True bred organisms will have a pure genotype (genetic expression of a trait) and will only produce a certain phenotype. 3. When trying to calculate the probability that two independent events will occur together you should specify size of the individual probability of each event. 4. When crossing dihybrid peas, Mendel noticed that there were four phenotypic types amongst the resulting F2 progeny; two had the phenotype of the parental generation and the other two were genotype. 5. The dominant trait is that which is masked in the F1 generation resulting from a cross between true breeding parents is True. 6. Mendel’s law of segregation says that during gamete formation different pairs of alleles segregate independently of each other is True..

Define1. Reciprocal cross –2. True or pure-breeding –Fill in t.pdf

ARCHANASTOREKOTA

More from ARCHANASTOREKOTA (20)